32c627eaf0
There are lots of "this option can be repeated" comments in the doc, which are not consistent to other similar docs. This patch changes them to the following format: "repeat option to do something" Change-Id: I54e01053091c428bf87bb36bb95f73a0b80ab6e7
5.3 KiB
subnet
Network v2
subnet create
Create new subnet
subnet create
os subnet create
[--project <project> [--project-domain <project-domain>]]
[--subnet-pool <subnet-pool> | --use-default-subnet-pool [--prefix-length <prefix-length>]]
[--subnet-range <subnet-range>]
[--allocation-pool start=<ip-address>,end=<ip-address>]
[--dhcp | --no-dhcp]
[--dns-nameserver <dns-nameserver>]
[--gateway <gateway>]
[--host-route destination=<subnet>,gateway=<ip-address>]
[--ip-version {4,6}]
[--ipv6-ra-mode {dhcpv6-stateful,dhcpv6-stateless,slaac}]
[--ipv6-address-mode {dhcpv6-stateful,dhcpv6-stateless,slaac}]
--network <network>
<name>--project <project>
Owner's project (name or ID)
--project-domain <project-domain>
Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.
--subnet-pool <subnet-pool>
Subnet pool from which this subnet will obtain a CIDR (name or ID)
--use-default-subnet-pool
Use default subnet pool for --ip-version
--prefix-length <prefix-length>
Prefix length for subnet allocation from subnet pool
--subnet-range <subnet-range>
Subnet range in CIDR notation (required if --subnet-pool
is not specified, optional otherwise)
--allocation-pool start=<ip-address>,end=<ip-address>
Allocation pool IP addresses for this subnet e.g.:
start=192.168.199.2,end=192.168.199.254 (repeat option to
add multiple IP addresses)
--dhcp
Enable DHCP (default)
--no-dhcp
Disable DHCP
--dns-nameserver <dns-nameserver>
DNS server for this subnet (repeat option to set multiple DNS servers)
--gateway <gateway>
Specify a gateway for the subnet. The three options are:
<ip-address>: Specific IP address to use as the gateway, 'auto':
Gateway address should automatically be chosen from within the subnet
itself, 'none': This subnet will not use a gateway, e.g.:
--gateway 192.168.9.1, --gateway auto,
--gateway none (default is 'auto')
--host-route destination=<subnet>,gateway=<ip-address>
Additional route for this subnet e.g.:
destination=10.10.0.0/16,gateway=192.168.71.254
destination: destination subnet (in CIDR notation) gateway: nexthop IP
address (repeat option to add multiple routes)
--ip-version {4,6}
IP version (default is 4). Note that when subnet pool is specified, IP version is determined from the subnet pool and this option is ignored.
--ipv6-ra-mode {dhcpv6-stateful,dhcpv6-stateless,slaac}
IPv6 RA (Router Advertisement) mode, valid modes: [dhcpv6-stateful, dhcpv6-stateless, slaac]
--ipv6-address-mode {dhcpv6-stateful,dhcpv6-stateless,slaac}
IPv6 address mode, valid modes: [dhcpv6-stateful, dhcpv6-stateless, slaac]
--network <network>
Network this subnet belongs to (name or ID)
Name of subnet to create
subnet delete
Delete a subnet
subnet delete
os subnet delete
<subnet>
Subnet to delete (name or ID)subnet list
List subnets
subnet list
os subnet list
[--long]--long
List additional fields in output
subnet set
Set subnet properties
subnet set
os subnet set
[--allocation-pool start=<ip-address>,end=<ip-address>]
[--dhcp | --no-dhcp]
[--dns-nameserver <dns-nameserver>]
[--gateway <gateway-ip>]
[--host-route destination=<subnet>,gateway=<ip-address>]
[--name <new-name>]
<subnet>--allocation-pool start=<ip-address>,end=<ip-address>
Allocation pool IP addresses for this subnet e.g.:
start=192.168.199.2,end=192.168.199.254 (repeat option to
add multiple IP addresses)
--dhcp
Enable DHCP
--no-dhcp
Disable DHCP
--dns-nameserver <dns-nameserver>
DNS server for this subnet (repeat option to set multiple DNS servers)
--gateway <gateway>
Specify a gateway for the subnet. The options are:
<ip-address>: Specific IP address to use as the gateway, 'none':
This subnet will not use a gateway, e.g.:
--gateway 192.168.9.1, --gateway none
--host-route destination=<subnet>,gateway=<ip-address>
Additional route for this subnet e.g.:
destination=10.10.0.0/16,gateway=192.168.71.254
destination: destination subnet (in CIDR notation) gateway: nexthop IP
address (repeat option to add multiple routes)
--name
Updated name of the subnet
Subnet to modify (name or ID)
subnet show
Show subnet details
subnet show
os subnet show
<subnet>
Subnet to show (name or ID)