openstack/tempest
Code Issues Proposed changes
14e2a4e421
tempest/.zuul.yaml
Luigi Toscano b4e0e2c7e7 zuul: clean up some legacy jobs 
Replace legacy-tempest-dsvm-lvm-multibackend with its native version,
cinder-tempest-lvm-multibackend.

Remove legacy-tempest-dsvm-neutron-dvr-multinode-full, which was defined
as an experimental job in neutron and removed during the ussuri lifecycle.
See https://review.opendev.org/#/c/693630/
It seems neutron-tempest-dvr-ha-multinode-full should cover its use case.

Change-Id: I6edfd00f0c43cd0bfe688db5e43768288dd4c1c1
2020-07-15 15:40:28 +02:00

747 lines
24 KiB
YAML
Raw Blame History

- job:
name: devstack-tempest
parent: devstack
description: |
Base Tempest job.
This Tempest job provides the base for both the single and multi-node
test setup. To run a multi-node test inherit from devstack-tempest and
set the nodeset to a multi-node one.
required-projects: &base_required-projects
- opendev.org/openstack/tempest
timeout: 7200
roles: &base_roles
- zuul: opendev.org/openstack/devstack
vars: &base_vars
devstack_services:
tempest: true
devstack_local_conf:
test-config:
$TEMPEST_CONFIG:
compute:
min_compute_nodes: "{{ groups['compute'] | default(['controller']) | length }}"
test_results_stage_name: test_results
zuul_copy_output:
'{{ devstack_base_dir }}/tempest/etc/tempest.conf': logs
'{{ devstack_base_dir }}/tempest/etc/accounts.yaml': logs
'{{ devstack_base_dir }}/tempest/tempest.log': logs
'{{ stage_dir }}/{{ test_results_stage_name }}.subunit': logs
'{{ stage_dir }}/{{ test_results_stage_name }}.html': logs
'{{ stage_dir }}/stackviz': logs
extensions_to_txt:
conf: true
log: true
yaml: true
yml: true
run: playbooks/devstack-tempest.yaml
post-run: playbooks/post-tempest.yaml
- job:
name: tempest-all
parent: devstack-tempest
description: |
Integration test that runs all tests.
Former name for this job was:
* legacy-periodic-tempest-dsvm-all-master
vars:
tox_envlist: all
tempest_test_regex: tempest
devstack_localrc:
ENABLE_FILE_INJECTION: true
- job:
name: devstack-tempest-ipv6
parent: devstack-ipv6
description: |
Base Tempest IPv6 job. This job is derived from 'devstack-ipv6'
which set the IPv6-only setting for OpenStack services. As part of
run phase, this job will verify the IPv6 setting and check the services
endpoints and listen addresses are IPv6. Basically it will run the script
./tool/verify-ipv6-only-deployments.sh
Child jobs of this job can run their own set of tests and can
add post-run playebooks to extend the IPv6 verification specific
to their deployed services.
Check the wiki page for more details about project jobs setup
- https://wiki.openstack.org/wiki/Goal-IPv6-only-deployments-and-testing
required-projects: *base_required-projects
timeout: 7200
roles: *base_roles
vars: *base_vars
run: playbooks/devstack-tempest-ipv6.yaml
post-run: playbooks/post-tempest.yaml
- job:
name: tempest-ipv6-only
parent: devstack-tempest-ipv6
# This currently works from stable/pike on.
branches: ^(?!stable/ocata).*$
description: |
Integration test of IPv6-only deployments. This job runs
smoke and IPv6 relates tests only. Basic idea is to test
whether OpenStack Services listen on IPv6 addrress or not.
timeout: 10800
vars:
tox_envlist: ipv6-only
- job:
name: tempest-full
parent: devstack-tempest
# This currently works from stable/pike on.
# Before stable/pike, legacy version of tempest-full
# 'legacy-tempest-dsvm-neutron-full' run.
branches: ^(?!stable/ocata).*$
description: |
Base integration test with Neutron networking and py27.
Former names for this job where:
* legacy-tempest-dsvm-neutron-full
* gate-tempest-dsvm-neutron-full-ubuntu-xenial
vars:
tox_envlist: full
devstack_localrc:
ENABLE_FILE_INJECTION: true
ENABLE_VOLUME_MULTIATTACH: true
USE_PYTHON3: False
devstack_services:
# NOTE(mriedem): Disable the cinder-backup service from tempest-full
# since tempest-full is in the integrated-gate project template but
# the backup tests do not really involve other services so they should
# be run in some more cinder-specific job, especially because the
# tests fail at a high rate (see bugs 1483434, 1813217, 1745168)
c-bak: false
- job:
name: tempest-full-oslo-master
parent: tempest-full
description: |
Integration test using current git of oslo libs.
This ensures that when oslo libs get released that they
do not break OpenStack server projects.
Former name for this job was
periodic-tempest-dsvm-oslo-latest-full-master.
timeout: 10800
required-projects:
- opendev.org/openstack/oslo.cache
- opendev.org/openstack/oslo.concurrency
- opendev.org/openstack/oslo.config
- opendev.org/openstack/oslo.context
- opendev.org/openstack/oslo.db
- opendev.org/openstack/oslo.i18n
- opendev.org/openstack/oslo.log
- opendev.org/openstack/oslo.messaging
- opendev.org/openstack/oslo.middleware
- opendev.org/openstack/oslo.policy
- opendev.org/openstack/oslo.privsep
- opendev.org/openstack/oslo.reports
- opendev.org/openstack/oslo.rootwrap
- opendev.org/openstack/oslo.serialization
- opendev.org/openstack/oslo.service
- opendev.org/openstack/oslo.utils
- opendev.org/openstack/oslo.versionedobjects
- opendev.org/openstack/oslo.vmware
vars:
devstack_localrc:
USE_PYTHON3: True
- job:
name: tempest-full-parallel
parent: tempest-full
voting: false
branches:
- master
description: |
Base integration test with Neutron networking.
It includes all scenarios as it was in the past.
This job runs all scenario tests in parallel!
timeout: 9000
vars:
tox_envlist: full-parallel
run_tempest_cleanup: true
run_tempest_dry_cleanup: true
devstack_localrc:
USE_PYTHON3: True
- job:
name: tempest-full-py3
parent: devstack-tempest
# This currently works from stable/pike on.
# Before stable/pike, legacy version of tempest-full
# 'legacy-tempest-dsvm-neutron-full' run.
branches: ^(?!stable/ocata).*$
description: |
Base integration test with Neutron networking and py3.
Former names for this job where:
* legacy-tempest-dsvm-py35
* gate-tempest-dsvm-py35
vars:
tox_envlist: full
devstack_localrc:
USE_PYTHON3: true
FORCE_CONFIG_DRIVE: true
ENABLE_VOLUME_MULTIATTACH: true
devstack_services:
s-account: false
s-container: false
s-object: false
s-proxy: false
# without Swift, c-bak cannot run (in the Gate at least)
# NOTE(mriedem): Disable the cinder-backup service from
# tempest-full-py3 since tempest-full-py3 is in the integrated-gate-py3
# project template but the backup tests do not really involve other
# services so they should be run in some more cinder-specific job,
# especially because the tests fail at a high rate (see bugs 1483434,
# 1813217, 1745168)
c-bak: false
- job:
name: tempest-integrated-networking
parent: devstack-tempest
branches: ^(?!stable/ocata).*$
description: |
This job runs integration tests for networking. This is subset of
'tempest-full' job and run only Neutron and Nova related tests.
This is meant to be run on neutron gate only.
vars:
tox_envlist: integrated-network
devstack_localrc:
USE_PYTHON3: true
FORCE_CONFIG_DRIVE: true
devstack_services:
s-account: false
s-container: false
s-object: false
s-proxy: false
c-bak: false
- job:
name: tempest-integrated-compute
parent: devstack-tempest
branches: ^(?!stable/ocata).*$
description: |
This job runs integration tests for compute. This is
subset of 'tempest-full' job and run Nova, Neutron, Cinder (except backup tests)
and Glance related tests. This is meant to be run on Nova gate only.
vars:
tox_envlist: integrated-compute
devstack_localrc:
USE_PYTHON3: true
FORCE_CONFIG_DRIVE: true
ENABLE_VOLUME_MULTIATTACH: true
devstack_services:
s-account: false
s-container: false
s-object: false
s-proxy: false
c-bak: false
- job:
name: tempest-integrated-placement
parent: devstack-tempest
branches: ^(?!stable/ocata).*$
description: |
This job runs integration tests for placement. This is
subset of 'tempest-full' job and run Nova and Neutron
related tests. This is meant to be run on Placement gate only.
vars:
tox_envlist: integrated-placement
devstack_localrc:
USE_PYTHON3: true
FORCE_CONFIG_DRIVE: true
ENABLE_VOLUME_MULTIATTACH: true
devstack_services:
s-account: false
s-container: false
s-object: false
s-proxy: false
c-bak: false
- job:
name: tempest-integrated-storage
parent: devstack-tempest
branches: ^(?!stable/ocata).*$
description: |
This job runs integration tests for image & block storage. This is
subset of 'tempest-full' job and run Cinder, Glance, Swift and Nova
related tests. This is meant to be run on Cinder and Glance gate only.
vars:
tox_envlist: integrated-storage
devstack_localrc:
USE_PYTHON3: true
FORCE_CONFIG_DRIVE: true
ENABLE_VOLUME_MULTIATTACH: true
- job:
name: tempest-integrated-object-storage
parent: devstack-tempest
branches: ^(?!stable/ocata).*$
description: |
This job runs integration tests for object storage. This is
subset of 'tempest-full' job and run Swift, Cinder and Glance
related tests. This is meant to be run on Swift gate only.
vars:
tox_envlist: integrated-object-storage
devstack_localrc:
# NOTE(gmann): swift is not ready on python3 yet and devstack
# install it on python2.7 only. But settting the USE_PYTHON3
# for future once swift is ready on py3.
USE_PYTHON3: true
- job:
name: tempest-full-py3-ipv6
parent: devstack-tempest-ipv6
# This currently works from stable/pike on.
# Before stable/pike, legacy version of tempest-full
# 'legacy-tempest-dsvm-neutron-full' run.
branches: ^(?!stable/ocata).*$
description: |
Base integration test with Neutron networking, IPv6 and py3.
vars:
tox_envlist: full
devstack_localrc:
USE_PYTHON3: true
FORCE_CONFIG_DRIVE: true
devstack_services:
s-account: false
s-container: false
s-object: false
s-proxy: false
# without Swift, c-bak cannot run (in the Gate at least)
c-bak: false
- job:
name: tempest-multinode-full-base
parent: devstack-tempest
description: |
Base multinode integration test with Neutron networking and py27.
Former names for this job were:
* neutron-tempest-multinode-full
* legacy-tempest-dsvm-neutron-multinode-full
* gate-tempest-dsvm-neutron-multinode-full-ubuntu-xenial-nv
This job includes two nodes, controller / tempest plus a subnode, but
it can be used with different topologies, as long as a controller node
and a tempest one exist.
timeout: 10800
vars:
tox_envlist: full
devstack_localrc:
FORCE_CONFIG_DRIVE: false
NOVA_ALLOW_MOVE_TO_SAME_HOST: false
LIVE_MIGRATION_AVAILABLE: true
USE_BLOCK_MIGRATION_FOR_LIVE_MIGRATION: true
group-vars:
peers:
devstack_localrc:
NOVA_ALLOW_MOVE_TO_SAME_HOST: false
LIVE_MIGRATION_AVAILABLE: true
USE_BLOCK_MIGRATION_FOR_LIVE_MIGRATION: true
- job:
name: tempest-multinode-full
parent: tempest-multinode-full-base
nodeset: openstack-two-node-bionic
# This job runs on Bionic from stable/stein on.
branches: ^(?!stable/(ocata|pike|queens|rocky)).*$
vars:
devstack_localrc:
USE_PYTHON3: False
group-vars:
subnode:
devstack_localrc:
USE_PYTHON3: False
- job:
name: tempest-multinode-full
parent: tempest-multinode-full-base
nodeset: openstack-two-node-xenial
# This job runs on Xenial and this is for stable/pike, stable/queens
# and stable/rocky. This job is prepared to make sure all stable branches
# before stable/stein will keep running on xenial. This job can be
# removed once stable/rocky is EOL.
branches:
- stable/pike
- stable/queens
- stable/rocky
vars:
devstack_localrc:
USE_PYTHON3: False
group-vars:
subnode:
devstack_localrc:
USE_PYTHON3: False
- job:
name: tempest-multinode-full-py3
parent: tempest-multinode-full
vars:
devstack_localrc:
USE_PYTHON3: true
group-vars:
subnode:
devstack_localrc:
USE_PYTHON3: true
- job:
name: tempest-full-py3-opensuse15
parent: tempest-full-py3
nodeset: devstack-single-node-opensuse-15
description: |
Base integration test with Neutron networking and py36 running
on openSUSE Leap 15.x
voting: false
- job:
name: tempest-slow
parent: tempest-multinode-full
description: |
This multinode integration job will run all the tests tagged as slow.
It enables the lvm multibackend setup to cover few scenario tests.
This job will run only slow tests (API or Scenario) serially.
Former names for this job were:
* legacy-tempest-dsvm-neutron-scenario-multinode-lvm-multibackend
* tempest-scenario-multinode-lvm-multibackend
timeout: 10800
vars:
tox_envlist: slow-serial
devstack_localrc:
CINDER_ENABLED_BACKENDS: lvm:lvmdriver-1,lvm:lvmdriver-2
ENABLE_VOLUME_MULTIATTACH: true
devstack_plugins:
neutron: https://opendev.org/openstack/neutron
devstack_services:
neutron-placement: true
neutron-qos: true
devstack_local_conf:
post-config:
"/$NEUTRON_CORE_PLUGIN_CONF":
ovs:
bridge_mappings: public:br-ex
resource_provider_bandwidths: br-ex:1000000:1000000
test-config:
$TEMPEST_CONFIG:
network-feature-enabled:
qos_placement_physnet: public
tempest_concurrency: 2
group-vars:
# NOTE(mriedem): The ENABLE_VOLUME_MULTIATTACH variable is used on both
# the controller and subnode prior to Rocky so we have to make sure the
# variable is set in both locations.
subnode:
devstack_localrc:
ENABLE_VOLUME_MULTIATTACH: true
- job:
name: tempest-slow-py3
parent: tempest-slow
vars:
devstack_localrc:
USE_PYTHON3: true
devstack_services:
s-account: false
s-container: false
s-object: false
s-proxy: false
# without Swift, c-bak cannot run (in the Gate at least)
c-bak: false
group-vars:
subnode:
devstack_localrc:
USE_PYTHON3: true
- job:
name: tempest-full-ussuri-py3
parent: tempest-full-py3
override-checkout: stable/ussuri
- job:
name: tempest-full-train-py3
parent: tempest-full-py3
override-checkout: stable/train
- job:
name: tempest-full-stein-py3
parent: tempest-full-py3
override-checkout: stable/stein
- job:
name: tempest-tox-plugin-sanity-check
parent: tox
description: |
Run tempest plugin sanity check script using tox.
nodeset: ubuntu-bionic
vars:
tox_envlist: plugin-sanity-check
timeout: 5000
- job:
name: tempest-cinder-v2-api
parent: devstack-tempest
branches:
- master
description: |
This job runs the cinder API test against v2 endpoint.
vars:
tox_envlist: all
tempest_test_regex: api.*volume
devstack_localrc:
TEMPEST_VOLUME_TYPE: volumev2
- job:
name: tempest-full-test-account-py3
parent: tempest-full-py3
description: |
This job runs the full set of tempest tests using pre-provisioned
credentials instead of dynamic credentials and py3.
Former names for this job were:
- legacy-tempest-dsvm-full-test-accounts
- legacy-tempest-dsvm-neutron-full-test-accounts
- legacy-tempest-dsvm-identity-v3-test-accounts
vars:
devstack_localrc:
TEMPEST_USE_TEST_ACCOUNTS: True
- job:
name: tempest-full-test-account-no-admin-py3
parent: tempest-full-test-account-py3
description: |
This job runs the full set of tempest tests using pre-provisioned
credentials and py3 without having an admin account.
Former name for this job was:
- legacy-tempest-dsvm-neutron-full-non-admin
vars:
devstack_localrc:
TEMPEST_HAS_ADMIN: False
- job:
name: tempest-pg-full
parent: tempest-full
description: |
Base integration test with Neutron networking and PostgreSQL.
Former name for this job was legacy-tempest-dsvm-neutron-pg-full.
vars:
devstack_localrc:
ENABLE_FILE_INJECTION: true
DATABASE_TYPE: postgresql
USE_PYTHON3: True
- project-template:
name: integrated-gate-networking
description: |
Run the python3 Tempest network integration tests (Nova and Neutron related)
in check and gate for the neutron integrated gate. This is meant to be
run on neutron gate only.
check:
jobs:
- grenade
- tempest-integrated-networking
gate:
jobs:
- grenade
- tempest-integrated-networking
- project-template:
name: integrated-gate-compute
description: |
Run the python3 Tempest compute integration tests
(Nova, Neutron, Cinder and Glance related) in check and gate
for the Nova integrated gate. This is meant to be
run on Nova gate only.
check:
jobs:
- grenade
- tempest-integrated-compute
gate:
jobs:
- grenade
- tempest-integrated-compute
- project-template:
name: integrated-gate-placement
description: |
Run the python3 Tempest placement integration tests
(Nova and Neutron related) in check and gate
for the Placement integrated gate. This is meant to be
run on Placement gate only.
check:
jobs:
- grenade
- tempest-integrated-placement
gate:
jobs:
- grenade
- tempest-integrated-placement
- project-template:
name: integrated-gate-storage
description: |
Run the python3 Tempest image & block storage integration tests
(Cinder, Glance, Swift and Nova related) in check and gate
for the neutron integrated gate. This is meant to be
run on Cinder and Glance gate only.
check:
jobs:
- grenade
- tempest-integrated-storage
gate:
jobs:
- grenade
- tempest-integrated-storage
- project-template:
name: integrated-gate-object-storage
description: |
Run the python3 Tempest object storage integration tests
(Swift, Cinder and Glance related) in check and gate
for the swift integrated gate. This is meant to be
run on swift gate only.
check:
jobs:
- grenade
- tempest-integrated-object-storage
gate:
jobs:
- grenade
- tempest-integrated-object-storage
- project:
templates:
- check-requirements
- integrated-gate-py3
- openstack-cover-jobs
- openstack-python3-victoria-jobs
- publish-openstack-docs-pti
- release-notes-jobs-python3
check:
jobs:
- devstack-tempest:
files:
- ^playbooks/
- ^roles/
- ^.zuul.yaml$
- devstack-tempest-ipv6:
voting: false
files:
- ^playbooks/
- ^roles/
- ^.zuul.yaml$
- tempest-full-parallel:
# Define list of irrelevant files to use everywhere else
irrelevant-files: &tempest-irrelevant-files
- ^.*\.rst$
- ^doc/.*$
- ^etc/.*$
- ^releasenotes/.*$
- ^setup.cfg$
- ^tempest/hacking/.*$
- ^tempest/tests/.*$
- ^tools/.*$
- ^.coveragerc$
- ^.gitignore$
- ^.gitreview$
- ^.mailmap$
- tempest-full-py3:
irrelevant-files: *tempest-irrelevant-files
- tempest-full-py3-ipv6:
voting: false
irrelevant-files: *tempest-irrelevant-files
- tempest-full-ussuri-py3:
irrelevant-files: *tempest-irrelevant-files
- tempest-full-train-py3:
irrelevant-files: *tempest-irrelevant-files
- tempest-full-stein-py3:
irrelevant-files: *tempest-irrelevant-files
- tempest-multinode-full-py3:
irrelevant-files: *tempest-irrelevant-files
- tempest-tox-plugin-sanity-check:
irrelevant-files: &tempest-irrelevant-files-2
- ^.*\.rst$
- ^doc/.*$
- ^etc/.*$
- ^releasenotes/.*$
- ^setup.cfg$
- ^tempest/hacking/.*$
- ^tempest/tests/.*$
- ^.coveragerc$
- ^.gitignore$
- ^.gitreview$
- ^.mailmap$
# tools/ is not here since this relies on a script in tools/.
- tempest-ipv6-only:
irrelevant-files: *tempest-irrelevant-files-2
- tempest-slow-py3:
irrelevant-files: *tempest-irrelevant-files
- nova-live-migration:
voting: false
irrelevant-files: *tempest-irrelevant-files
- devstack-plugin-ceph-tempest-py3:
irrelevant-files: *tempest-irrelevant-files
- neutron-grenade-multinode:
irrelevant-files: *tempest-irrelevant-files
- grenade:
irrelevant-files: *tempest-irrelevant-files
- puppet-openstack-integration-4-scenario001-tempest-centos-7:
voting: false
irrelevant-files: *tempest-irrelevant-files
- puppet-openstack-integration-4-scenario002-tempest-centos-7:
voting: false
irrelevant-files: *tempest-irrelevant-files
- puppet-openstack-integration-4-scenario003-tempest-centos-7:
voting: false
irrelevant-files: *tempest-irrelevant-files
- puppet-openstack-integration-4-scenario004-tempest-centos-7:
voting: false
irrelevant-files: *tempest-irrelevant-files
- neutron-tempest-dvr:
irrelevant-files: *tempest-irrelevant-files
- interop-tempest-consistency:
irrelevant-files: *tempest-irrelevant-files
- tempest-full-test-account-py3:
voting: false
irrelevant-files: *tempest-irrelevant-files
- tempest-full-test-account-no-admin-py3:
voting: false
irrelevant-files: *tempest-irrelevant-files
- openstack-tox-bashate:
irrelevant-files: *tempest-irrelevant-files-2
gate:
jobs:
- tempest-slow-py3:
irrelevant-files: *tempest-irrelevant-files
- neutron-grenade-multinode:
irrelevant-files: *tempest-irrelevant-files
- tempest-full-py3:
irrelevant-files: *tempest-irrelevant-files
- grenade:
irrelevant-files: *tempest-irrelevant-files
- tempest-ipv6-only:
irrelevant-files: *tempest-irrelevant-files-2
- devstack-plugin-ceph-tempest-py3:
irrelevant-files: *tempest-irrelevant-files
experimental:
jobs:
- tempest-cinder-v2-api:
irrelevant-files: *tempest-irrelevant-files
- tempest-all:
irrelevant-files: *tempest-irrelevant-files
- neutron-tempest-dvr-ha-multinode-full:
irrelevant-files: *tempest-irrelevant-files
- nova-tempest-v2-api:
irrelevant-files: *tempest-irrelevant-files
- cinder-tempest-lvm-multibackend:
irrelevant-files: *tempest-irrelevant-files
- tempest-pg-full:
irrelevant-files: *tempest-irrelevant-files
- tempest-full-py3-opensuse15:
irrelevant-files: *tempest-irrelevant-files
periodic-stable:
jobs:
- tempest-full-ussuri-py3
- tempest-full-train-py3
- tempest-full-stein-py3
periodic:
jobs:
- tempest-all
- tempest-full-oslo-master
View Git Blame Copy Permalink