tripleo-docs/deploy-guide/source/provisioning/profile_matching.rst

Node matching with resource classes and profiles

The Baremetal Provision Configuration describes all of the instance and defaults properties which can be used as selection criteria for which node will be assigned to a provisioned instance. Filtering on the resource_class property is recommended for nodes which have special hardware for specific roles. The profile property is recommended for other matching requirements such as placing specific roles to groups of nodes, or assigning instances to nodes based on introspection data.

Resource class matching

As an example of matching on special hardware, this shows how to have a custom Compute role for PMEM equipped hardware, see ../features/compute_nvdimm.

By default all nodes are assigned the resource_class of baremetal. Each node which is PMEM enabled needs to have its resource_class changed to baremetal.PMEM:

baremetal node set <UUID OR NAME> --resource-class baremetal.PMEM

Assuming there is a custom role called ComputePMEM, the ~/overcloud_baremetal_deploy.yaml file will match on baremetal.PMEM nodes with:

- name: ComputePMEM
  count: 3
  defaults:
    resource_class: baremetal.PMEM

Advanced profile matching

Profile matching allows a user to specify precisely which nodes provision with each role (or instance). Here are additional setup steps to take advantage of the profile matching. In this document profile is a capability that is assigned to the ironic node, then matched in the openstack overcloud node provision yaml.

After profile is specified in ~/overcloud_baremetal_deploy.yaml, metalsmith will only deploy it on ironic nodes with the same profile. Deployment will fail if not enough ironic nodes are tagged with a profile.

There are two ways to assign a profile to a node. You can assign it directly or specify one or many suitable profiles for the deployment command to choose from. It can be done either manually or using the introspection rules.

Manual profile tagging

To assign a profile to a node directly, issue the following command:

baremetal node set <UUID OR NAME> --property capabilities=profile:<PROFILE>

To clean all profile information from a node use:

baremetal node unset <UUID OR NAME> --property capabilities

Note

We can not update only a single key from the capabilities dictionary, so if it contained more then just the profile information then this will need to be set for the node.

Also see instackenv for details on how to set profile in the instackenv.json file.

Automated profile tagging

Introspection rules can be used to conduct automatic profile assignment based on data received from the introspection ramdisk. A set of introspection rules should be created before introspection that either set profile or <PROFILE>_profile capabilities on a node.

The exact structure of data received from the ramdisk depends on both ramdisk implementation and enabled plugins, and on enabled ironic-inspector processing hooks. The most basic properties are cpus, cpu_arch, local_gb and memory_mb, which represent CPU number, architecture, local hard drive size in GiB and RAM size in MiB. See introspection_data for more details on what our current ramdisk provides.

Create a JSON file, for example rules.json, with the introspection rules to apply (see Example of introspection rules). Before the introspection load this file into ironic-inspector:

baremetal introspection rule import /path/to/rules.json

Then (re)start the introspection. Check assigned profiles using command:

baremetal node list -c uuid -c name -c properties

If you've made a mistake in introspection rules, you can delete them all:

baremetal introspection rule purge

Then reupload the updated rules file and restart introspection.

Note

When you use introspection rules to assign the profile capability, it will always override the existing value. On the contrary, <PROFILE>_profile capabilities are ignored for nodes with the existing profile capability.

Example of introspection rules

Imagine we have the following hardware: with disk sizes > 1 TiB for object storage and with smaller disks for compute and controller nodes. We also need to make sure that no hardware with seriously insufficient properties gets to the fleet at all.

[
    {
        "description": "Fail introspection for unexpected nodes",
        "conditions": [
            {"op": "lt", "field": "memory_mb", "value": 4096}
        ],
        "actions": [
            {"action": "fail", "message": "Memory too low, expected at least 4 GiB"}
        ]
    },
    {
        "description": "Assign profile for object storage",
        "conditions": [
            {"op": "ge", "field": "local_gb", "value": 1024}
        ],
        "actions": [
            {"action": "set-capability", "name": "profile", "value": "swift-storage"}
        ]
    },
    {
        "description": "Assign possible profiles for compute and controller",
        "conditions": [
            {"op": "lt", "field": "local_gb", "value": 1024},
            {"op": "ge", "field": "local_gb", "value": 40}
        ],
        "actions": [
            {"action": "set-capability", "name": "compute_profile", "value": "1"},
            {"action": "set-capability", "name": "control_profile", "value": "1"},
            {"action": "set-capability", "name": "profile", "value": null}
        ]
    }
]

This example consists of 3 rules:

1. Fail introspection if memory is lower is 4096 MiB. Such rules can be applied to exclude nodes that should not become part of your cloud.
2. Nodes with hard drive size 1 TiB and bigger are assigned the swift-storage profile unconditionally.
3. Nodes with hard drive less than 1 TiB but more than 40 GiB can be either compute or control nodes. So we assign two capabilities compute_profile and control_profile, so that the openstack overcloud node provision command can later make the final choice. For that to work, we remove the existing profile capability, otherwise it will have priority.
4. Other nodes are not changed.

Provision with profile matching

Assuming nodes have been assigned the profiles control_profile and compute_profile, the ~/overcloud_baremetal_deploy.yaml can be modified with the following to match profiles during openstack overcloud node provision:

- name: Controller
  count: 3
  defaults:
    profile: control_profile
- name: Compute
  count: 100
  defaults:
    profile: compute_profile