tripleo-heat-templates/deployment

TripleO Deployments

This directory contains files that represent individual service deployments, orchestration tools, and the configuration tools used to deploy them.

Directory Structure

Each logical grouping of services will have a directory. Example: 'timesync'. Within this directory related timesync services would exist to for example configure timesync services on baremetal or via containers.

Filenaming conventions

As a convention each deployments service filename will reflect both the deployment engine (baremetal, or containers) along with the config tool used to deploy that service.

The convention is <service-name>-<engine>-<config management tool>.

Examples:

deployment/aodh/aodh-api-container-puppet.yaml (containerized Aodh service configured with Puppet)

deployment/aodh/aodh-api-container-ansible.yaml (containerized Aodh service configured with Ansible)

deployment/timesync/chrony-baremetal-ansible.yaml (baremetal Chrony service configured with Ansible)

deployment/timesync/chrony-baremetal-puppet.yaml (baremetal Chrony service configured with Puppet)

Building Kolla Images

TripleO currently relies on Kolla(Dockerfile) containers. Kolla supports container customization and we are making use of this feature within TripleO to inject puppet (our configuration tool of choice) into the Kolla base images. A variety of other customizations are being made via the tripleo-common/container-images/tripleo_kolla_template_overrides.j2 file.

To build Kolla images for TripleO adjust your kolla config¹ to build your centos base image with puppet using the example below:

$ cat template-overrides.j2 {% extends parent_template %} {% set base_centos_binary_packages_append = ['puppet'] %} {% set nova_scheduler_packages_append = ['openstack-tripleo-common'] %}

kolla-build --base centos --template-override template-overrides.j2

Containerized Deployment Template Structure

Each deployment template may define a set of output values control the underlying service deployment in a variety of ways. These output sections are specific to the TripleO deployment architecture. The following sections are available for containerized services.

• config_settings: This section contains service specific hiera data can be used to generate config files for each service. This data is ultimately processed via the container-puppet.py tool which generates config files for each service according to the settings here.

• kolla_config: Contains YAML that represents how to map config files into the kolla container. This config file is typically mapped into the container itself at the /var/lib/kolla/config_files/config.json location and drives how kolla's external config mechanisms work.

• docker_config: Data that is passed to paunch tool to configure a container, or step of containers at each step. See the available steps documented below which are implemented by TripleO's cluster deployment architecture.

• puppet_config: This section is a nested set of key value pairs that drive the creation of config files using puppet. Required parameters include:

  • puppet_tags: Puppet resource tag names that are used to generate config files with puppet. Only the named config resources are used to generate a config file. Any service that specifies tags will have the default tags of 'file,concat,file_line,augeas,cron' appended to the setting. Example: keystone_config
  • config_volume: The name of the volume (directory) where config files will be generated for this service. Use this as the location to bind mount into the running Kolla container for configuration.
  • config_image: The name of the container image that will be used for generating configuration files. This is often the same container that the runtime service uses. Some services share a common set of config files which are generated in a common base container.
  • step_config: This setting controls the manifest that is used to create container config files via puppet. The puppet tags below are used along with this manifest to generate a config directory for this container.

• container_puppet_tasks: This section provides data to drive the container-puppet.py tool directly. The task is executed only once within the cluster (not on each node) and is useful for several puppet snippets we require for initialization of things like keystone endpoints, database users, etc. See container-puppet.py for formatting.

• global_config_settings: the hiera keys will be distributed to all roles

• service_config_settings: Takes an extra key to wire in values that are defined for a service that need to be consumed by some other service. For example: service_config_settings: haproxy: foo: bar This will set the hiera key 'foo' on all roles where haproxy is included.

Deployment steps

Similar to baremetal containers are brought up in a stepwise manner. The current architecture supports bringing up baremetal services alongside of containers. For each step the baremetal puppet manifests are executed first and then any containers are brought up afterwards.

Steps correlate to the following:

Pre) Containers config files generated per hiera settings. 1) Load Balancer configuration baremetal a) step 1 baremetal b) step 1 containers 2) Core Services (Database/Rabbit/NTP/etc.) a) step 2 baremetal b) step 2 containers 3) Early Openstack Service setup (Ringbuilder, etc.) a) step 3 baremetal b) step 3 containers 4) General OpenStack Services a) step 4 baremetal b) step 4 containers c) Keystone containers post initialization (tenant,service,endpoint creation) 5) Service activation (Pacemaker), online data migration a) step 5 baremetal b) step 5 containers

Update steps:

All services have an associated update_tasks output that is an ansible snippet that will be run during update in an rolling update that is expected to run in a rolling update fashion (one node at a time)

For Controller (where pacemaker is running) we have the following states:

1. Step=1: stop the cluster on the updated node;
2. Step=2: Pull the latest image and retag the it pcmklatest
3. Step=3: yum upgrade happens on the host.
4. Step=4: Restart the cluster on the node
5. Step=5: Verification: Currently we test that the pacemaker services are running.

Then the usual deploy steps are run which pull in the latest image for all containerized services and the updated configuration if any.

Note: as pacemaker is not containerized, the points 1 and 4 happen in deployment/pacemaker/pacemaker-baremetal-puppet.yaml.

Fast-forward Upgrade Steps

Each service template may optionally define a fast_forward_upgrade_tasks key, which is a list of Ansible tasks to be performed during the fast-forward upgrade process. As with Upgrade steps each task is associated to a particular step provided as a variable and used along with a release variable by a basic conditional that determines when the task should run.

Steps are broken down into two categories, prep tasks executed across all hosts and bootstrap tasks executed on a single host for a given role.

The individual steps then correspond to the following tasks during the upgrade:

Prep steps:

• Step=0: Check running services
• Step=1: Stop the service
• Step=2: Stop the cluster
• Step=3: Update repos

Bootstrap steps:

• Step=4: DB backups
• Step=5: Pre package update commands
• Step=6: Package updates
• Step=7: Post package update commands
• Step=8: DB syncs
• Step=9: Verification

Input Parameters

Each service may define its own input parameters and defaults. Operators will use the parameter_defaults section of any Heat environment to set per service parameters.

Apart from sevice specific inputs, there are few default parameters for all the services. Following are the list of default parameters:

• ServiceData: Mapping of service specific data. It is used to encapsulate all the service specific data. As of now, it contains net_cidr_map, which contains the CIDR map for all the networks. Additional data will be added as and when required.

• ServiceNetMap: Mapping of service_name -> network name. Default mappings for service to network names are defined in ../network/service_net_map.j2.yaml, which may be overridden via ServiceNetMap values added to a user environment file via parameter_defaults.

• EndpointMap: Mapping of service endpoint -> protocol. Contains a mapping of endpoint data generated for all services, based on the data included in ../network/endpoints/endpoint_data.yaml.

• DefaultPasswords: Mapping of service -> default password. Used to pass some passwords from the parent templates, this is a legacy interface and should not be used by new services.

• RoleName: Name of the role on which this service is deployed. A service can be deployed in multiple roles. This is an internal parameter (should not be set via environment file), which is fetched from the name attribute of the roles_data.yaml template.

• RoleParameters: Parameter specific to a role on which the service is applied. Using the format "<RoleName>Parameters" in the parameter_defaults of user environment file, parameters can be provided for a specific role. For example, in order to provide a parameter specific to "Compute" role, below is the format:

  parameter_defaults:
    ComputeParameters:
      Param1: value

Update Steps

Each service template may optionally define a update_tasks key, which is a list of ansible tasks to be performed during the minor update process. These are executed in a rolling manner node-by-node.

We allow a series of steps for the per-service update sequence via conditionals referencing a step variable e.g when: step|int == 2.

Pre-upgrade Rolling Steps

Each service template may optionally define a pre_upgrade_rolling_tasks key, which is a list of ansible tasks to be performed before the main upgrade phase, and these tasks are executed in a node-by-node rolling manner on the overcloud, similarly as update_tasks.

Upgrade Steps

Each service template may optionally define a upgrade_tasks key, which is a list of ansible tasks to be performed during the upgrade process.

Similar to the update_tasks, we allow a series of steps for the per-service upgrade sequence, defined as ansible tasks with a "when: step|int == 1" for the first step, "== 2" for the second, etc.

Steps correlate to the following:

1. Perform any pre-upgrade validations.
2. Stop the control-plane services, e.g disable LoadBalancer, stop pacemaker cluster and stop any managed resources. The exact order is controlled by the cluster constraints.
3. Perform a package update and install new packages: A general upgrade is done, and only new package should go into service ansible tasks.
4. Start services needed for migration tasks (e.g DB)
5. Perform any migration tasks, e.g DB sync commands

Note that the services are not started in the upgrade tasks - we instead re-run puppet which does any reconfiguration required for the new version, then starts the services.

Nova Server Metadata Settings

One can use the hook of type OS::TripleO::ServiceServerMetadataHook to pass entries to the nova instances' metadata. It is, however, disabled by default. In order to overwrite it one needs to define it in the resource registry. An implementation of this hook needs to conform to the following:

• It needs to define an input called RoleData of json type. This gets as input the contents of the role_data for each role's ServiceChain.
• This needs to define an output called metadata which will be given to the Nova Server resource as the instance's metadata.

---

1. See the override file which can be used to build Kolla packages that work with TripleO.↩︎