openstack/tripleo-heat-templates
Code Issues Proposed changes
bf41f8f358
tripleo-heat-templates/environments
History
Dan Sneddon bf41f8f358 Fix network-isolation.yaml to stop clobbering Management net 
The network-isolation.yaml file explicitly set the Management
network to None and the ports to noop.yaml. This resulted in the
Management network being disabled if network-management.yaml was
included before network-isolation.yaml.

These changes comment out the Management declarations to show the
default, and mention that network-management.yaml may be included.
Since the Management network is disabled by default, it isn't
necessary to noop it here. This change also places the Redis VIP
in a more logical place next to the controller ports.

Change-Id: I50a71b3ddf77bda2d213821da5e4260b503a6cb7
Fixes-bug: 1602283
2016-07-12 14:17:27 +00:00
..
updates Always use parameter_defaults in environment files 2016-04-11 14:15:39 -04:00
cinder-dellsc-config.yaml Enable Dell Storage Center iscsi Backends in Cinder 2016-01-06 17:54:37 +01:00
cinder-eqlx-config.yaml Enable Equallogic Backends in Cinder 2015-11-12 10:46:15 -06:00
cinder-netapp-config.yaml Fix Puppet Configuring NetApp Cinder Backend 2015-07-20 11:09:44 -04:00
config-debug.yaml Allow enabling debug mode for config management (Puppet) 2015-09-30 15:30:22 +02:00
docker-network-isolation.yaml Remove unused Neutron Agents container 2016-03-09 16:23:07 +00:00
docker-network.yaml Network Isolation support for containerized compute 2016-01-04 20:41:41 +00:00
docker.yaml Always use parameter_defaults in environment files 2016-04-11 14:15:39 -04:00
enable-tls.yaml Pass MysqlVirtualIP via EndpointMap 2016-05-30 10:22:59 +03:00
external-loadbalancer-vip-v6.yaml Make External Load Balancer templates work with IPv6 2016-03-09 11:20:21 +00:00
external-loadbalancer-vip.yaml Comment out the ManagementPort in external-loadbalancer-vip.yaml 2016-03-18 15:20:41 +01:00
inject-trust-anchor.yaml Enable trust anchor injection 2015-11-25 15:16:08 +02:00
ips-from-pool-all.yaml Enable predictable IPs on non-controllers 2016-03-09 13:25:02 -06:00
ips-from-pool.yaml Add sample environment file to document usage of predictable IPs 2015-12-15 12:52:15 +01:00
major-upgrade-pacemaker-converge.yaml Fix distinguishing between stack-create and stack-update 2016-04-11 14:31:42 +02:00
major-upgrade-pacemaker-init.yaml Adjust UpgradeLevelNovaCompute rpc messaging pin to mitaka 2016-05-31 14:30:57 +03:00
major-upgrade-pacemaker.yaml Adjust UpgradeLevelNovaCompute rpc messaging pin to mitaka 2016-05-31 14:30:57 +03:00
manage-firewall.yaml Always use parameter_defaults in environment files 2016-04-11 14:15:39 -04:00
mongodb-nojournal.yaml Always use parameter_defaults in environment files 2016-04-11 14:15:39 -04:00
net-bond-with-vlans-no-external.yaml Remove network/noop.yaml, use OS::Heat::None 2016-04-08 08:02:31 -04:00
net-bond-with-vlans-v6.yaml Add IPv6 versions of the Controller NIC configs 2016-03-05 03:22:03 +01:00
net-bond-with-vlans.yaml Add IPv6 versions of the Controller NIC configs 2016-03-05 03:22:03 +01:00
net-multiple-nics-v6.yaml Add IPv6 versions of the Controller NIC configs 2016-03-05 03:22:03 +01:00
net-multiple-nics.yaml Add network templates for multiple NIC configuration 2015-11-05 14:09:45 +00:00
net-single-nic-linux-bridge-with-vlans.yaml Add IPv6 versions of the Controller NIC configs 2016-03-05 03:22:03 +01:00
net-single-nic-with-vlans-no-external.yaml Remove network/noop.yaml, use OS::Heat::None 2016-04-08 08:02:31 -04:00
net-single-nic-with-vlans-v6.yaml Add IPv6 versions of the Controller NIC configs 2016-03-05 03:22:03 +01:00
net-single-nic-with-vlans.yaml Add IPv6 versions of the Controller NIC configs 2016-03-05 03:22:03 +01:00
network-environment.yaml Merge "Fixes ovs bonding option" 2016-05-06 09:55:13 +00:00
network-isolation-no-tunneling.yaml Add environment for isolated networks without tunneling VLAN 2015-08-28 17:50:14 -07:00
network-isolation-v6.yaml configure horizon with memcached ipv6 when needed 2016-03-23 15:43:10 -04:00
network-isolation.yaml Fix network-isolation.yaml to stop clobbering Management net 2016-07-12 14:17:27 +00:00
network-management-v6.yaml Add IPv6 support for the management network 2016-06-20 14:02:44 +02:00
network-management.yaml Add IPv6 support for the management network 2016-06-20 14:02:44 +02:00
neutron-midonet.yaml composable neutron ml2 and ovs agent 2016-06-09 10:45:30 -04:00
neutron-ml2-bigswitch.yaml Add extra config yaml files for big switch agents. 2016-02-22 15:56:19 -08:00
neutron-ml2-cisco-n1kv.yaml Enable Cisco N1KV driver 2015-09-30 09:22:33 +03:00
neutron-ml2-cisco-nexus-ucsm.yaml Change the default value for NetworkNexusVxlanGlobalConfig 2016-02-24 19:08:07 +03:00
neutron-nuage-config.yaml Composable neutron nuage plugin 2016-06-16 15:04:25 -04:00
neutron-opencontrail.yaml composable neutron ml2 and ovs agent 2016-06-09 10:45:30 -04:00
neutron-plumgrid.yaml Drop extraconfig for neutron-plumgrid.yaml 2016-06-13 21:57:58 -04:00
nova-nuage-config.yaml Changes for configuring Nuage 2015-11-30 14:22:08 -05:00
overcloud-steps.yaml Rename -puppet.yaml templates. 2015-09-22 08:30:01 -04:00
puppet-ceph-devel.yaml Always use parameter_defaults in environment files 2016-04-11 14:15:39 -04:00
puppet-ceph-external.yaml Deploy Gnocchi as a Ceilometer metrics storage backend 2016-04-11 12:27:38 -04:00
puppet-pacemaker.yaml Composable neutron nuage plugin 2016-06-16 15:04:25 -04:00
puppet-tenant-vlan.yaml Always use parameter_defaults in environment files 2016-04-11 14:15:39 -04:00
README.md Add a directory for overcloud heat environments 2015-05-15 12:28:00 +02:00
storage-environment.yaml Document IPv6 syntax for GlanceFilePcmkDevice 2016-04-11 14:21:18 -05:00

README.md

This directory contains Heat environment file snippets which can be used to enable features in the Overcloud.

Configuration

These can be enabled using the -e [path to environment yaml] option with heatclient.

Below is an example of how to enable the Ceph template using devtest_overcloud.sh:

export OVERCLOUD\_CUSTOM\_HEAT\_ENV=$TRIPLEO\_ROOT/tripleo-heat-templates/environments/ceph_devel.yaml