starlingx/app-harbor
Code Issues Proposed changes

Disable huge pages in harbor-database

Browse Source 
Harbor database fails with the error 'bus error 7' if there is some
issue with the page allocation.
This review disables the huge pages (config entry huge_pages = off)
by applying a patch

Test Plan:
PASS: AIO-SX app upload/apply/remove/delete
PASS: AIO-SX Verify if huge_pages is off in harbor-database-0
	  pod
PASS: AIO-SX verify if harbor login page is accessibe and 'admin'
      user is able to login to harbor registry

Story: 2010721
Task: 50600

Change-Id: I4ffa03b4cc306babc2b00d3feccf2dd603af388c
Signed-off-by: Jagatguru Prasad Mishra <jagatguruprasad.mishra@windriver.com>
This commit is contained in:
Jagatguru Prasad Mishra 2024-07-18 05:38:55 -04:00
parent 6a54279b18
commit 2f0f94618e
4 changed files with 858 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
helm-charts/upstream/harbor-helm/debian/deb_folder/changelog
View File

@ -1,3 +1,9 @@
harbor-helm (1.12-3) unstable; urgency=medium
* Internal change to disable huge pages in harbor db
-- Jagatguru Prasad Mishra <jagatguruprasad.mishra@windriver.com> Wed, 17 Jul 2024 10:10:43 -0400
harbor-helm (1.12-2) unstable; urgency=medium
* Initial release.

849
helm-charts/upstream/harbor-helm/debian/deb_folder/patches/0003-disable-huge-pages.patch Normal file
View File

@ -0,0 +1,849 @@
From edba163a7dca81db87b89a8cf454c7d4e9374918 Mon Sep 17 00:00:00 2001
From: Jagatguru Prasad Mishra <jagatguruprasad.mishra@windriver.com>
Date: Wed, 17 Jul 2024 10:10:43 -0400
Subject: [PATCH 1/1] disable huge pages
In this patch a config map is created with all the default values of postgresql.conf.sample
taken from /usr/pgsql/13/share/postgresql location of the container
started from the image goharbor/harbor-db:v2.8.0 and setting 'huge_pages = off'.
This is mounted at /usr/pgsql/13/share/postgresql/postgresql.conf.sample
so that postgress initdb disables the huge pages.
---
templates/database/database-ss.yaml | 6 +
templates/database/huge-pages-config.yaml | 806 ++++++++++++++++++++++
2 files changed, 812 insertions(+)
create mode 100644 templates/database/huge-pages-config.yaml
diff --git a/templates/database/database-ss.yaml b/templates/database/database-ss.yaml
index 733243c..300edd0 100644
--- a/templates/database/database-ss.yaml
+++ b/templates/database/database-ss.yaml
@@ -108,7 +108,13 @@ spec:
subPath: {{ $database.subPath }}
- name: shm-volume
mountPath: /dev/shm
+ - name: config-huge-pages
+ mountPath: /usr/pgsql/13/share/postgresql/postgresql.conf.sample
+ subPath: postgresql.conf.sample
volumes:
+ - name: config-huge-pages
+ configMap:
+ name: huge-pages-config
- name: shm-volume
emptyDir:
medium: Memory
diff --git a/templates/database/huge-pages-config.yaml b/templates/database/huge-pages-config.yaml
new file mode 100644
index 0000000..7da5241
--- /dev/null
+++ b/templates/database/huge-pages-config.yaml
@@ -0,0 +1,806 @@
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: huge-pages-config
+data:
+ postgresql.conf.sample: |-
+ # -----------------------------
+ # PostgreSQL configuration file
+ # -----------------------------
+ #
+ # This file consists of lines of the form:
+ #
+ # name = value
+ #
+ # (The "=" is optional.) Whitespace may be used. Comments are introduced with
+ # "#" anywhere on a line. The complete list of parameter names and allowed
+ # values can be found in the PostgreSQL documentation.
+ #
+ # The commented-out settings shown in this file represent the default values.
+ # Re-commenting a setting is NOT sufficient to revert it to the default value;
+ # you need to reload the server.
+ #
+ # This file is read on server startup and when the server receives a SIGHUP
+ # signal. If you edit the file on a running system, you have to SIGHUP the
+ # server for the changes to take effect, run "pg_ctl reload", or execute
+ # "SELECT pg_reload_conf()". Some parameters, which are marked below
+ # # -----------------------------
+ # PostgreSQL configuration file
+ # -----------------------------
+ #
+ # This file consists of lines of the form:
+ #
+ # name = value
+ #
+ # (The "=" is optional.) Whitespace may be used. Comments are introduced with
+ # "#" anywhere on a line. The complete list of parameter names and allowed
+ # values can be found in the PostgreSQL documentation.
+ #
+ # The commented-out settings shown in this file represent the default values.
+ # Re-commenting a setting is NOT sufficient to revert it to the default value;
+ # you need to reload the server.
+ #
+ # This file is read on server startup and when the server receives a SIGHUP
+ # signal. If you edit the file on a running system, you have to SIGHUP the
+ # server for the changes to take effect, run "pg_ctl reload", or execute
+ # "SELECT pg_reload_conf()". Some parameters, which are marked below,
+ # require a server shutdown and restart to take effect.
+ #
+ # Any parameter can also be given as a command-line option to the server, e.g.,
+ # "postgres -c log_connections=on". Some parameters can be changed at run time
+ # with the "SET" SQL command.
+ #
+ # Memory units: B = bytes Time units: us = microseconds
+ # kB = kilobytes ms = milliseconds
+ # MB = megabytes s = seconds
+ # GB = gigabytes min = minutes
+ # TB = terabytes h = hours
+ # d = days
+
+
+ #------------------------------------------------------------------------------
+ # FILE LOCATIONS
+ #------------------------------------------------------------------------------
+
+ # The default values of these variables are driven from the -D command-line
+ # option or PGDATA environment variable, represented here as ConfigDir.
+
+ #data_directory = 'ConfigDir' # use data in another directory
+ # (change requires restart)
+ #hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file
+ # (change requires restart)
+ #ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file
+ # (change requires restart)
+
+ # If external_pid_file is not explicitly set, no extra PID file is written.
+ #external_pid_file = '' # write an extra PID file
+ # (change requires restart)
+
+
+ #------------------------------------------------------------------------------
+ # CONNECTIONS AND AUTHENTICATION
+ #------------------------------------------------------------------------------
+
+ # - Connection Settings -
+
+ listen_addresses = '*'
+ # comma-separated list of addresses;
+ # defaults to 'localhost'; use '*' for all
+ # (change requires restart)
+ #port = 5432 # (change requires restart)
+ #max_connections = 100 # (change requires restart)
+ #superuser_reserved_connections = 3 # (change requires restart)
+ unix_socket_directories = '/run/postgresql'
+ # (change requires restart)
+ #unix_socket_group = '' # (change requires restart)
+ #unix_socket_permissions = 0777 # begin with 0 to use octal notation
+ # (change requires restart)
+ #bonjour = off # advertise server via Bonjour
+ # (change requires restart)
+ #bonjour_name = '' # defaults to the computer name
+ # (change requires restart)
+
+ # - TCP settings -
+ # see "man tcp" for details
+
+ #tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
+ # 0 selects the system default
+ #tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;
+ # 0 selects the system default
+ #tcp_keepalives_count = 0 # TCP_KEEPCNT;
+ # 0 selects the system default
+ #tcp_user_timeout = 0 # TCP_USER_TIMEOUT, in milliseconds;
+ # 0 selects the system default
+
+ # - Authentication -
+
+ #authentication_timeout = 1min # 1s-600s
+ #password_encryption = md5 # md5 or scram-sha-256
+ #db_user_namespace = off
+
+ # GSSAPI using Kerberos
+ #krb_server_keyfile = 'FILE:${sysconfdir}/krb5.keytab'
+ #krb_caseins_users = off
+
+ # - SSL -
+
+ #ssl = off
+ #ssl_ca_file = ''
+ #ssl_cert_file = 'server.crt'
+ #ssl_crl_file = ''
+ #ssl_key_file = 'server.key'
+ #ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
+ #ssl_prefer_server_ciphers = on
+ #ssl_ecdh_curve = 'prime256v1'
+ #ssl_min_protocol_version = 'TLSv1.2'
+ #ssl_max_protocol_version = ''
+ #ssl_dh_params_file = ''
+ #ssl_passphrase_command = ''
+ #ssl_passphrase_command_supports_reload = off
+
+
+ #------------------------------------------------------------------------------
+ # RESOURCE USAGE (except WAL)
+ #------------------------------------------------------------------------------
+
+ # - Memory -
+
+ #shared_buffers = 32MB # min 128kB
+ # (change requires restart)
+ huge_pages = off
+ # (change requires restart)
+ #temp_buffers = 8MB # min 800kB
+ #max_prepared_transactions = 0 # zero disables the feature
+ # (change requires restart)
+ # Caution: it is not advisable to set max_prepared_transactions nonzero unless
+ # you actively intend to use prepared transactions.
+ #work_mem = 4MB # min 64kB
+ #hash_mem_multiplier = 1.0 # 1-1000.0 multiplier on hash table work_mem
+ #maintenance_work_mem = 64MB # min 1MB
+ #autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem
+ #logical_decoding_work_mem = 64MB # min 64kB
+ #max_stack_depth = 2MB # min 100kB
+ #shared_memory_type = mmap # the default is the first option
+ # supported by the operating system:
+ # mmap
+ # sysv
+ # windows
+ # (change requires restart)
+ #dynamic_shared_memory_type = posix # the default is the first option
+ # supported by the operating system:
+ # posix
+ # sysv
+ # windows
+ # mmap
+ # (change requires restart)
+
+ # - Disk -
+
+ #temp_file_limit = -1 # limits per-process temp file space
+ # in kilobytes, or -1 for no limit
+
+ # - Kernel Resources -
+
+ #max_files_per_process = 1000 # min 64
+ # (change requires restart)
+
+ # - Cost-Based Vacuum Delay -
+
+ #vacuum_cost_delay = 0 # 0-100 milliseconds (0 disables)
+ #vacuum_cost_page_hit = 1 # 0-10000 credits
+ #vacuum_cost_page_miss = 10 # 0-10000 credits
+ #vacuum_cost_page_dirty = 20 # 0-10000 credits
+ #vacuum_cost_limit = 200 # 1-10000 credits
+
+ # - Background Writer -
+
+ #bgwriter_delay = 200ms # 10-10000ms between rounds
+ #bgwriter_lru_maxpages = 100 # max buffers written/round, 0 disables
+ #bgwriter_lru_multiplier = 2.0 # 0-10.0 multiplier on buffers scanned/round
+ #bgwriter_flush_after = 0 # measured in pages, 0 disables
+
+ # - Asynchronous Behavior -
+
+ #effective_io_concurrency = 1 # 1-1000; 0 disables prefetching
+ #maintenance_io_concurrency = 10 # 1-1000; 0 disables prefetching
+ #max_worker_processes = 8 # (change requires restart)
+ #max_parallel_maintenance_workers = 2 # taken from max_parallel_workers
+ #max_parallel_workers_per_gather = 2 # taken from max_parallel_workers
+ #parallel_leader_participation = on
+ #max_parallel_workers = 8 # maximum number of max_worker_processes that
+ # can be used in parallel operations
+ #old_snapshot_threshold = -1 # 1min-60d; -1 disables; 0 is immediate
+ # (change requires restart)
+ #backend_flush_after = 0 # measured in pages, 0 disables
+
+
+ #------------------------------------------------------------------------------
+ # WRITE-AHEAD LOG
+ #------------------------------------------------------------------------------
+
+ # - Settings -
+
+ #wal_level = replica # minimal, replica, or logical
+ # (change requires restart)
+ #fsync = on # flush data to disk for crash safety
+ # (turning this off can cause
+ # unrecoverable data corruption)
+ #synchronous_commit = on # synchronization level;
+ # off, local, remote_write, remote_apply, or on
+ #wal_sync_method = fsync # the default is the first option
+ # supported by the operating system:
+ # open_datasync
+ # fdatasync (default on Linux and FreeBSD)
+ # fsync
+ # fsync_writethrough
+ # open_sync
+ #full_page_writes = on # recover from partial page writes
+ #wal_compression = off # enable compression of full-page writes
+ #wal_log_hints = off # also do full page writes of non-critical updates
+ # (change requires restart)
+ #wal_init_zero = on # zero-fill new WAL files
+ #wal_recycle = on # recycle WAL files
+ #wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers
+ # (change requires restart)
+ #wal_writer_delay = 200ms # 1-10000 milliseconds
+ #wal_writer_flush_after = 1MB # measured in pages, 0 disables
+ #wal_skip_threshold = 2MB
+
+ #commit_delay = 0 # range 0-100000, in microseconds
+ #commit_siblings = 5 # range 1-1000
+
+ # - Checkpoints -
+
+ #checkpoint_timeout = 5min # range 30s-1d
+ #max_wal_size = 1GB
+ #min_wal_size = 80MB
+ #checkpoint_completion_target = 0.5 # checkpoint target duration, 0.0 - 1.0
+ #checkpoint_flush_after = 0 # measured in pages, 0 disables
+ #checkpoint_warning = 30s # 0 disables
+
+ # - Archiving -
+
+ #archive_mode = off # enables archiving; off, on, or always
+ # (change requires restart)
+ #archive_command = '' # command to use to archive a logfile segment
+ # placeholders: %p = path of file to archive
+ # %f = file name only
+ # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
+ #archive_timeout = 0 # force a logfile segment switch after this
+ # number of seconds; 0 disables
+
+ # - Archive Recovery -
+
+ # These are only used in recovery mode.
+
+ #restore_command = '' # command to use to restore an archived logfile segment
+ # placeholders: %p = path of file to restore
+ # %f = file name only
+ # e.g. 'cp /mnt/server/archivedir/%f %p'
+ # (change requires restart)
+ #archive_cleanup_command = '' # command to execute at every restartpoint
+ #recovery_end_command = '' # command to execute at completion of recovery
+
+ # - Recovery Target -
+
+ # Set these only when performing a targeted recovery.
+
+ #recovery_target = '' # 'immediate' to end recovery as soon as a
+ # consistent state is reached
+ # (change requires restart)
+ #recovery_target_name = '' # the named restore point to which recovery will proceed
+ # (change requires restart)
+ #recovery_target_time = '' # the time stamp up to which recovery will proceed
+ # (change requires restart)
+ #recovery_target_xid = '' # the transaction ID up to which recovery will proceed
+ # (change requires restart)
+ #recovery_target_lsn = '' # the WAL LSN up to which recovery will proceed
+ # (change requires restart)
+ #recovery_target_inclusive = on # Specifies whether to stop:
+ # just after the specified recovery target (on)
+ # just before the recovery target (off)
+ # (change requires restart)
+ #recovery_target_timeline = 'latest' # 'current', 'latest', or timeline ID
+ # (change requires restart)
+ #recovery_target_action = 'pause' # 'pause', 'promote', 'shutdown'
+ # (change requires restart)
+
+
+ #------------------------------------------------------------------------------
+ # REPLICATION
+ #------------------------------------------------------------------------------
+
+ # - Sending Servers -
+
+ # Set these on the master and on any standby that will send replication data.
+
+ #max_wal_senders = 10 # max number of walsender processes
+ # (change requires restart)
+ #wal_keep_size = 0 # in megabytes; 0 disables
+ #max_slot_wal_keep_size = -1 # in megabytes; -1 disables
+ #wal_sender_timeout = 60s # in milliseconds; 0 disables
+
+ #max_replication_slots = 10 # max number of replication slots
+ # (change requires restart)
+ #track_commit_timestamp = off # collect timestamp of transaction commit
+ # (change requires restart)
+
+ # - Master Server -
+
+ # These settings are ignored on a standby server.
+
+ #synchronous_standby_names = '' # standby servers that provide sync rep
+ # method to choose sync standbys, number of sync standbys,
+ # and comma-separated list of application_name
+ # from standby(s); '*' = all
+ #vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed
+
+ # - Standby Servers -
+
+ # These settings are ignored on a master server.
+
+ #primary_conninfo = '' # connection string to sending server
+ #primary_slot_name = '' # replication slot on sending server
+ #promote_trigger_file = '' # file name whose presence ends recovery
+ #hot_standby = on # "off" disallows queries during recovery
+ # (change requires restart)
+ #max_standby_archive_delay = 30s # max delay before canceling queries
+ # when reading WAL from archive;
+ # -1 allows indefinite delay
+ #max_standby_streaming_delay = 30s # max delay before canceling queries
+ # when reading streaming WAL;
+ # -1 allows indefinite delay
+ #wal_receiver_create_temp_slot = off # create temp slot if primary_slot_name
+ # is not set
+ #wal_receiver_status_interval = 10s # send replies at least this often
+ # 0 disables
+ #hot_standby_feedback = off # send info from standby to prevent
+ # query conflicts
+ #wal_receiver_timeout = 60s # time that receiver waits for
+ # communication from master
+ # in milliseconds; 0 disables
+ #wal_retrieve_retry_interval = 5s # time to wait before retrying to
+ # retrieve WAL after a failed attempt
+ #recovery_min_apply_delay = 0 # minimum delay for applying changes during recovery
+
+ # - Subscribers -
+
+ # These settings are ignored on a publisher.
+
+ #max_logical_replication_workers = 4 # taken from max_worker_processes
+ # (change requires restart)
+ #max_sync_workers_per_subscription = 2 # taken from max_logical_replication_workers
+
+
+ #------------------------------------------------------------------------------
+ # QUERY TUNING
+ #------------------------------------------------------------------------------
+
+ # - Planner Method Configuration -
+
+ #enable_bitmapscan = on
+ #enable_hashagg = on
+ #enable_hashjoin = on
+ #enable_indexscan = on
+ #enable_indexonlyscan = on
+ #enable_material = on
+ #enable_mergejoin = on
+ #enable_nestloop = on
+ #enable_parallel_append = on
+ #enable_seqscan = on
+ #enable_sort = on
+ #enable_incremental_sort = on
+ #enable_tidscan = on
+ #enable_partitionwise_join = off
+ #enable_partitionwise_aggregate = off
+ #enable_parallel_hash = on
+ #enable_partition_pruning = on
+
+ # - Planner Cost Constants -
+
+ #seq_page_cost = 1.0 # measured on an arbitrary scale
+ #random_page_cost = 4.0 # same scale as above
+ #cpu_tuple_cost = 0.01 # same scale as above
+ #cpu_index_tuple_cost = 0.005 # same scale as above
+ #cpu_operator_cost = 0.0025 # same scale as above
+ #parallel_tuple_cost = 0.1 # same scale as above
+ #parallel_setup_cost = 1000.0 # same scale as above
+
+ #jit_above_cost = 100000 # perform JIT compilation if available
+ # and query more expensive than this;
+ # -1 disables
+ #jit_inline_above_cost = 500000 # inline small functions if query is
+ # more expensive than this; -1 disables
+ #jit_optimize_above_cost = 500000 # use expensive JIT optimizations if
+ # query is more expensive than this;
+ # -1 disables
+
+ #min_parallel_table_scan_size = 8MB
+ #min_parallel_index_scan_size = 512kB
+ #effective_cache_size = 4GB
+
+ # - Genetic Query Optimizer -
+
+ #geqo = on
+ #geqo_threshold = 12
+ #geqo_effort = 5 # range 1-10
+ #geqo_pool_size = 0 # selects default based on effort
+ #geqo_generations = 0 # selects default based on effort
+ #geqo_selection_bias = 2.0 # range 1.5-2.0
+ #geqo_seed = 0.0 # range 0.0-1.0
+
+ # - Other Planner Options -
+
+ #default_statistics_target = 100 # range 1-10000
+ #constraint_exclusion = partition # on, off, or partition
+ #cursor_tuple_fraction = 0.1 # range 0.0-1.0
+ #from_collapse_limit = 8
+ #join_collapse_limit = 8 # 1 disables collapsing of explicit
+ # JOIN clauses
+ #force_parallel_mode = off
+ #jit = on # allow JIT compilation
+ #plan_cache_mode = auto # auto, force_generic_plan or
+ # force_custom_plan
+
+
+ #------------------------------------------------------------------------------
+ # REPORTING AND LOGGING
+ #------------------------------------------------------------------------------
+
+ # - Where to Log -
+
+ #log_destination = 'stderr' # Valid values are combinations of
+ # stderr, csvlog, syslog, and eventlog,
+ # depending on platform. csvlog
+ # requires logging_collector to be on.
+
+ # This is used when logging to stderr:
+ #logging_collector = off # Enable capturing of stderr and csvlog
+ # into log files. Required to be on for
+ # csvlogs.
+ # (change requires restart)
+
+ # These are only used if logging_collector is on:
+ #log_directory = 'log' # directory where log files are written,
+ # can be absolute or relative to PGDATA
+ #log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern,
+ # can include strftime() escapes
+ #log_file_mode = 0600 # creation mode for log files,
+ # begin with 0 to use octal notation
+ #log_truncate_on_rotation = off # If on, an existing log file with the
+ # same name as the new log file will be
+ # truncated rather than appended to.
+ # But such truncation only occurs on
+ # time-driven rotation, not on restarts
+ # or size-driven rotation. Default is
+ # off, meaning append to existing files
+ # in all cases.
+ #log_rotation_age = 1d # Automatic rotation of logfiles will
+ # happen after that time. 0 disables.
+ #log_rotation_size = 10MB # Automatic rotation of logfiles will
+ # happen after that much log output.
+ # 0 disables.
+
+ # These are relevant when logging to syslog:
+ #syslog_facility = 'LOCAL0'
+ #syslog_ident = 'postgres'
+ #syslog_sequence_numbers = on
+ #syslog_split_messages = on
+
+ # This is only relevant when logging to eventlog (win32):
+ # (change requires restart)
+ #event_source = 'PostgreSQL'
+
+ # - When to Log -
+
+ #log_min_messages = warning # values in order of decreasing detail:
+ # debug5
+ # debug4
+ # debug3
+ # debug2
+ # debug1
+ # info
+ # notice
+ # warning
+ # error
+ # log
+ # fatal
+ # panic
+
+ #log_min_error_statement = error # values in order of decreasing detail:
+ # debug5
+ # debug4
+ # debug3
+ # debug2
+ # debug1
+ # info
+ # notice
+ # warning
+ # error
+ # log
+ # fatal
+ # panic (effectively off)
+
+ #log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements
+ # and their durations, > 0 logs only
+ # statements running at least this number
+ # of milliseconds
+
+ #log_min_duration_sample = -1 # -1 is disabled, 0 logs a sample of statements
+ # and their durations, > 0 logs only a sample of
+ # statements running at least this number
+ # of milliseconds;
+ # sample fraction is determined by log_statement_sample_rate
+
+ #log_statement_sample_rate = 1.0 # fraction of logged statements exceeding
+ # log_min_duration_sample to be logged;
+ # 1.0 logs all such statements, 0.0 never logs
+
+
+ #log_transaction_sample_rate = 0.0 # fraction of transactions whose statements
+ # are logged regardless of their duration; 1.0 logs all
+ # statements from all transactions, 0.0 never logs
+
+ # - What to Log -
+
+ #debug_print_parse = off
+ #debug_print_rewritten = off
+ #debug_print_plan = off
+ #debug_pretty_print = on
+ #log_checkpoints = off
+ #log_connections = off
+ #log_disconnections = off
+ #log_duration = off
+ #log_error_verbosity = default # terse, default, or verbose messages
+ #log_hostname = off
+ #log_line_prefix = '%m [%p] ' # special values:
+ # %a = application name
+ # %u = user name
+ # %d = database name
+ # %r = remote host and port
+ # %h = remote host
+ # %b = backend type
+ # %p = process ID
+ # %t = timestamp without milliseconds
+ # %m = timestamp with milliseconds
+ # %n = timestamp with milliseconds (as a Unix epoch)
+ # %i = command tag
+ # %e = SQL state
+ # %c = session ID
+ # %l = session line number
+ # %s = session start timestamp
+ # %v = virtual transaction ID
+ # %x = transaction ID (0 if none)
+ # %q = stop here in non-session
+ # processes
+ # %% = '%'
+ # e.g. '<%u%%%d> '
+ #log_lock_waits = off # log lock waits >= deadlock_timeout
+ #log_parameter_max_length = -1 # when logging statements, limit logged
+ # bind-parameter values to N bytes;
+ # -1 means print in full, 0 disables
+ #log_parameter_max_length_on_error = 0 # when logging an error, limit logged
+ # bind-parameter values to N bytes;
+ # -1 means print in full, 0 disables
+ #log_statement = 'none' # none, ddl, mod, all
+ #log_replication_commands = off
+ #log_temp_files = -1 # log temporary files equal or larger
+ # than the specified size in kilobytes;
+ # -1 disables, 0 logs all temp files
+ #log_timezone = 'GMT'
+
+ #------------------------------------------------------------------------------
+ # PROCESS TITLE
+ #------------------------------------------------------------------------------
+
+ #cluster_name = '' # added to process titles if nonempty
+ # (change requires restart)
+ #update_process_title = on
+
+
+ #------------------------------------------------------------------------------
+ # STATISTICS
+ #------------------------------------------------------------------------------
+
+ # - Query and Index Statistics Collector -
+
+ #track_activities = on
+ #track_counts = on
+ #track_io_timing = off
+ #track_functions = none # none, pl, all
+ #track_activity_query_size = 1024 # (change requires restart)
+ #stats_temp_directory = 'pg_stat_tmp'
+
+
+ # - Monitoring -
+
+ #log_parser_stats = off
+ #log_planner_stats = off
+ #log_executor_stats = off
+ #log_statement_stats = off
+
+
+ #------------------------------------------------------------------------------
+ # AUTOVACUUM
+ #------------------------------------------------------------------------------
+
+ #autovacuum = on # Enable autovacuum subprocess? 'on'
+ # requires track_counts to also be on.
+ #log_autovacuum_min_duration = -1 # -1 disables, 0 logs all actions and
+ # their durations, > 0 logs only
+ # actions running at least this number
+ # of milliseconds.
+ #autovacuum_max_workers = 3 # max number of autovacuum subprocesses
+ # (change requires restart)
+ #autovacuum_naptime = 1min # time between autovacuum runs
+ #autovacuum_vacuum_threshold = 50 # min number of row updates before
+ # vacuum
+ #autovacuum_vacuum_insert_threshold = 1000 # min number of row inserts
+ # before vacuum; -1 disables insert
+ # vacuums
+ #autovacuum_analyze_threshold = 50 # min number of row updates before
+ # analyze
+ #autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum
+ #autovacuum_vacuum_insert_scale_factor = 0.2 # fraction of inserts over table
+ # size before insert vacuum
+ #autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze
+ #autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum
+ # (change requires restart)
+ #autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age
+ # before forced vacuum
+ # (change requires restart)
+ #autovacuum_vacuum_cost_delay = 2ms # default vacuum cost delay for
+ # autovacuum, in milliseconds;
+ # -1 means use vacuum_cost_delay
+ #autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
+ # autovacuum, -1 means use
+ # vacuum_cost_limit
+
+
+ #------------------------------------------------------------------------------
+ # CLIENT CONNECTION DEFAULTS
+ #------------------------------------------------------------------------------
+
+ # - Statement Behavior -
+
+ #client_min_messages = notice # values in order of decreasing detail:
+ # debug5
+ # debug4
+ # debug3
+ # debug2
+ # debug1
+ # log
+ # notice
+ # warning
+ # error
+ #search_path = '"$user", public' # schema names
+ #row_security = on
+ #default_tablespace = '' # a tablespace name, '' uses the default
+ #temp_tablespaces = '' # a list of tablespace names, '' uses
+ # only default tablespace
+ #default_table_access_method = 'heap'
+ #check_function_bodies = on
+ #default_transaction_isolation = 'read committed'
+ #default_transaction_read_only = off
+ #default_transaction_deferrable = off
+ #session_replication_role = 'origin'
+ #statement_timeout = 0 # in milliseconds, 0 is disabled
+ #lock_timeout = 0 # in milliseconds, 0 is disabled
+ #idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled
+ #vacuum_freeze_min_age = 50000000
+ #vacuum_freeze_table_age = 150000000
+ #vacuum_multixact_freeze_min_age = 5000000
+ #vacuum_multixact_freeze_table_age = 150000000
+ #vacuum_cleanup_index_scale_factor = 0.1 # fraction of total number of tuples
+ # before index cleanup, 0 always performs
+ # index cleanup
+ #bytea_output = 'hex' # hex, escape
+ #xmlbinary = 'base64'
+ #xmloption = 'content'
+ #gin_fuzzy_search_limit = 0
+ #gin_pending_list_limit = 4MB
+
+ # - Locale and Formatting -
+
+ #datestyle = 'iso, mdy'
+ #intervalstyle = 'postgres'
+ #timezone = 'GMT'
+ #timezone_abbreviations = 'Default' # Select the set of available time zone
+ # abbreviations. Currently, there are
+ # Default
+ # Australia (historical usage)
+ # India
+ # You can create your own file in
+ # share/timezonesets/.
+ #extra_float_digits = 1 # min -15, max 3; any value >0 actually
+ # selects precise output mode
+ #client_encoding = sql_ascii # actually, defaults to database
+ # encoding
+
+ # These settings are initialized by initdb, but they can be changed.
+ #lc_messages = 'C' # locale for system error message
+ # strings
+ #lc_monetary = 'C' # locale for monetary formatting
+ #lc_numeric = 'C' # locale for number formatting
+ #lc_time = 'C' # locale for time formatting
+
+ # default configuration for text search
+ #default_text_search_config = 'pg_catalog.simple'
+
+ # - Shared Library Preloading -
+
+ #shared_preload_libraries = '' # (change requires restart)
+ #local_preload_libraries = ''
+ #session_preload_libraries = ''
+ #jit_provider = 'llvmjit' # JIT library to use
+
+ # - Other Defaults -
+
+ #dynamic_library_path = '$libdir'
+
+
+ #------------------------------------------------------------------------------
+ # LOCK MANAGEMENT
+ #------------------------------------------------------------------------------
+
+ #deadlock_timeout = 1s
+ #max_locks_per_transaction = 64 # min 10
+ # (change requires restart)
+ #max_pred_locks_per_transaction = 64 # min 10
+ # (change requires restart)
+ #max_pred_locks_per_relation = -2 # negative values mean
+ # (max_pred_locks_per_transaction
+ # / -max_pred_locks_per_relation) - 1
+ #max_pred_locks_per_page = 2 # min 0
+
+
+ #------------------------------------------------------------------------------
+ # VERSION AND PLATFORM COMPATIBILITY
+ #------------------------------------------------------------------------------
+
+ # - Previous PostgreSQL Versions -
+
+ #array_nulls = on
+ #backslash_quote = safe_encoding # on, off, or safe_encoding
+ #escape_string_warning = on
+ #lo_compat_privileges = off
+ #operator_precedence_warning = off
+ #quote_all_identifiers = off
+ #standard_conforming_strings = on
+ #synchronize_seqscans = on
+
+ # - Other Platforms and Clients -
+
+ #transform_null_equals = off
+
+
+ #------------------------------------------------------------------------------
+ # ERROR HANDLING
+ #------------------------------------------------------------------------------
+
+ #exit_on_error = off # terminate session on any error?
+ #restart_after_crash = on # reinitialize after backend crash?
+ #data_sync_retry = off # retry or panic on failure to fsync
+ # data?
+ # (change requires restart)
+
+
+ #------------------------------------------------------------------------------
+ # CONFIG FILE INCLUDES
+ #------------------------------------------------------------------------------
+
+ # These options allow settings to be loaded from files other than the
+ # default postgresql.conf. Note that these are directives, not variable
+ # assignments, so they can usefully be given more than once.
+
+ #include_dir = '...' # include files ending in '.conf' from
+ # a directory, e.g., 'conf.d'
+ #include_if_exists = '...' # include file only if it exists
+ #include = '...' # include file
+
+
+ #------------------------------------------------------------------------------
+ # CUSTOMIZED OPTIONS
+ #------------------------------------------------------------------------------
+
+ # Add settings for extensions here
--
2.25.1

1
helm-charts/upstream/harbor-helm/debian/deb_folder/patches/series
View File

@ -1,2 +1,3 @@
0001-AddNodeAffinityToPods.patch
0002-adding-control-plane-toleration-to-the-pods.patch
0003-disable-huge-pages.patch

4
helm-charts/upstream/harbor-helm/debian/meta_data.yaml
View File

@ -1,6 +1,6 @@
---
debname: harbor-helm
debver: 1.12-2
debver: 1.12-3
dl_path:
name: harbor-1.12.0.tar.gz
url: https://github.com/goharbor/harbor-helm/archive/refs/tags/v1.12.0.tar.gz
@ -9,7 +9,7 @@ src_files:
- harbor-helm/files/Makefile
revision:
dist: $STX_DIST
stx_patch: 1
stx_patch: 2
GITREVCOUNT:
SRC_DIR: ${MY_REPO}/stx/app-harbor/helm-charts/upstream/harbor-helm
BASE_SRCREV: e097b7cfda6e1258151c9143f274bebec31335c9