starlingx/docs
Code Issues Proposed changes

Fix symlinks

Browse Source 
Changed paths to avoid '..', which breaks symlinks in newer versions of sphinx.
Consolidated installation include files under /_includes. Prefixed r5 versions with 'r5_'
Moved files that are used up/down, but at different paths under /shared/_includes
and /shared/figures
Move two include files to /_includes
Moved addtional images to /shared/figures/... Required for DS platform builds.

Signed-off-by: Ron Stone <ronald.stone@windriver.com>
Change-Id: Ia38f4205c5803b3d1fc043e6c59617c34a4e5cbd
Signed-off-by: Ron Stone <ronald.stone@windriver.com>
This commit is contained in:
Ron Stone 2021-08-25 09:07:26 -04:00 committed by Juanita-Balaraj
parent ab3ddbb30c
commit 2b62f49a9d
222 changed files with 571 additions and 564 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
doc/source/deploy_install_guides/r5_release/ansible_install_time_only.txt → doc/source/_includes/ansible_install_time_only.txt
View File

@ -1,7 +1,7 @@
.. important:: .. important::
Some Ansible bootstrap parameters cannot be changed or are very difficult to change after installation is complete. Some Ansible bootstrap parameters cannot be changed or are very difficult to change after installation is complete.
Review the set of install-time-only parameters before installation and confirm that your values for these parameters are correct for the desired installation. Review the set of install-time-only parameters before installation and confirm that your values for these parameters are correct for the desired installation.
Refer to :ref:`Ansible install-time-only parameters <install-time-only-params-r5>` for details. Refer to :ref:`Ansible install-time-only parameters <install-time-only-params-r6>` for details.

2
doc/source/_includes/docker-proxy-config.rest
View File

@ -16,7 +16,7 @@ Set proxy at bootstrap
To set the Docker proxy at bootstrap time, refer to :doc:`Ansible Bootstrap To set the Docker proxy at bootstrap time, refer to :doc:`Ansible Bootstrap
Configurations Configurations
<../deploy_install_guides/r6_release/ansible_bootstrap_configs>`. </deploy_install_guides/r6_release/ansible_bootstrap_configs>`.
.. r3_end .. r3_end

14
doc/source/deploy_install_guides/r5_release/kubernetes_install_next.txt → doc/source/_includes/kubernetes_install_next.txt
View File

@ -1,7 +1,7 @@
Your Kubernetes cluster is now up and running. Your Kubernetes cluster is now up and running.
For instructions on how to access StarlingX Kubernetes see For instructions on how to access StarlingX Kubernetes see
:doc:`../kubernetes_access`. :ref:`kubernetes_access`.
For instructions on how to install and access StarlingX OpenStack see For instructions on how to install and access StarlingX OpenStack see
:doc:`../openstack/index`. :doc:`/deploy_install_guides/r6_release/openstack/index`.

14
doc/source/deploy_install_guides/r6_release/kubernetes_install_next.txt → doc/source/_includes/r5_kubernetes_install_next.txt
View File

@ -1,7 +1,7 @@
Your Kubernetes cluster is now up and running. Your Kubernetes cluster is now up and running.
For instructions on how to access StarlingX Kubernetes see For instructions on how to access StarlingX Kubernetes see
:doc:`../kubernetes_access`. :ref:`kubernetes_access`.
For instructions on how to install and access StarlingX OpenStack see For instructions on how to install and access StarlingX OpenStack see
:doc:`../openstack/index`. :doc:`/deploy_install_guides/r5_release/openstack/index`.

2
doc/source/_includes/set-proxy-at-bootstrap.rest
View File

@ -3,4 +3,4 @@ Set proxy at bootstrap
---------------------- ----------------------
To set the Docker proxy at bootstrap time, refer to To set the Docker proxy at bootstrap time, refer to
:doc:`Ansible Bootstrap Configurations <../deploy_install_guides/r3_release/ansible_bootstrap_configs>`. :doc:`Ansible Bootstrap Configurations </deploy_install_guides/r3_release/ansible_bootstrap_configs>`.

2
doc/source/contributor/doc_contribute_guide.rst
View File

@ -1,3 +1,5 @@
.. _doc_contribute_guide:
=============================== ===============================
Documentation Contributor Guide Documentation Contributor Guide
=============================== ===============================

4
doc/source/contributor/index.rst
View File

@ -32,8 +32,8 @@ Additional StarlingX-specific resources are listed below.
:maxdepth: 1 :maxdepth: 1
development_process development_process
../developer_resources/code-submission-guide /developer_resources/code-submission-guide
../developer_resources/debug_issues /developer_resources/debug_issues
-------------------- --------------------
Additional resources Additional resources

4
doc/source/datanet/kubernetes/the-data-network-topology-view.rst
View File

@ -18,7 +18,7 @@ hosts or networks to highlight their connections and obtain more details.
To display this view, select **Admin** \> **Platform** \> **Data Network To display this view, select **Admin** \> **Platform** \> **Data Network
Topology**. Topology**.
.. image:: ../figures/sqw1475425312420.png .. image:: /datanet/figures/sqw1475425312420.png
:height: 365px :height: 365px
.. _the-data-network-topology-view-section-N1002F-N1001C-N10001: .. _the-data-network-topology-view-section-N1002F-N1001C-N10001:
@ -75,7 +75,7 @@ using icons superimposed on the entities. The alarms are color-coded for
severity using the same colors as the Global Alarm Banner. Details for the severity using the same colors as the Global Alarm Banner. Details for the
alarms are listed in the **Related Alarms** tab for the entity. alarms are listed in the **Related Alarms** tab for the entity.
.. image:: ../figures/eal1475518780745.png .. image:: /shared/figures/datanet/eal1475518780745.png
.. _the-data-network-topology-view-section-N100AD-N1001C-N10001: .. _the-data-network-topology-view-section-N100AD-N1001C-N10001:

6
doc/source/datanet/openstack/adding-a-static-ip-address-to-a-data-interface.rst
View File

@ -45,18 +45,18 @@ To make interface changes, you must lock the compute host first.
#. In the Edit Interface dialog box, set the **IPv4 Addressing Mode** or #. In the Edit Interface dialog box, set the **IPv4 Addressing Mode** or
the **IPv6 Addressing Mode** to **Static**. the **IPv6 Addressing Mode** to **Static**.
.. image:: ../figures/bju1538154656153.png .. image:: /shared/figures/datanet/bju1538154656153.png
#. Add an IPv4 or IPv6 address to the interface. #. Add an IPv4 or IPv6 address to the interface.
#. On the Host Detail page, click the **Name** of the interface to open #. On the Host Detail page, click the **Name** of the interface to open
the Interface Detail page. the Interface Detail page.
.. image:: ../figures/jow1443041105867.png .. image:: /shared/figures/datanet/jow1443041105867.png
#. Click **Create Address** to open the Create Address dialog box. #. Click **Create Address** to open the Create Address dialog box.
.. image:: ../figures/jow1442607685238.png .. image:: /shared/figures/datanet/jow1442607685238.png
#. Enter the IPv4 or IPv6 address and netmask \(for example, #. Enter the IPv4 or IPv6 address and netmask \(for example,
192.168.1.3/24\), and then click **Create Address**. 192.168.1.3/24\), and then click **Create Address**.

2
doc/source/datanet/openstack/dynamic-vxlan.rst
View File

@ -37,7 +37,7 @@ for more complex routing requirements but requires IP multicast enabled routers.
:start-after: vswitch-text-1-begin :start-after: vswitch-text-1-begin
:end-before: vswitch-text-1-end :end-before: vswitch-text-1-end
.. figure:: ../figures/eol1510005391750.png .. figure:: /shared/figures/datanet/eol1510005391750.png
Multicast Endpoint Distribution Multicast Endpoint Distribution

2
doc/source/datanet/openstack/static-vxlan.rst
View File

@ -28,7 +28,7 @@ to receive the packet in order to reach the |VM|.
Static |VXLAN| is limited to use on one data network. If configured, it must be Static |VXLAN| is limited to use on one data network. If configured, it must be
enabled on all OpenStack compute nodes. enabled on all OpenStack compute nodes.
.. figure:: ../figures/oeg1510005898965.png .. figure:: /shared/figures/datanet/oeg1510005898965.png
`Static Endpoint Distribution` `Static Endpoint Distribution`

4
doc/source/datanet/openstack/using-ip-address-pools-for-data-interfaces.rst
View File

@ -37,7 +37,7 @@ To make interface changes, you must lock the compute node first.
#. Select the **Address Pools** tab. #. Select the **Address Pools** tab.
.. image:: ../figures/jow1445971002260.png .. image:: /shared/figures/datanet/jow1445971002260.png
You can use the controls on the Address Pools page to create, update, or You can use the controls on the Address Pools page to create, update, or
delete address pools. delete address pools.
@ -45,7 +45,7 @@ To make interface changes, you must lock the compute node first.
#. To create an address pool, click **Create Address Pool** and complete the #. To create an address pool, click **Create Address Pool** and complete the
dialog box. dialog box.
.. image:: ../figures/jow1445971475692.png .. image:: /shared/figures/datanet/jow1445971475692.png
**Name** **Name**
A name used for selecting the pool during data interface setup. A name used for selecting the pool during data interface setup.

2
doc/source/deploy_install_guides/nvme_config.rst
View File

@ -1,3 +1,5 @@
.. _nvme_config:
==================================== ====================================
Configure NVMe Drive as Primary Disk Configure NVMe Drive as Primary Disk
==================================== ====================================

4
doc/source/deploy_install_guides/r5_release/bare_metal/aio_duplex.rst
View File

@ -6,13 +6,13 @@ Bare metal All-in-one Duplex Installation R5.0
Overview Overview
-------- --------
.. include:: ../desc_aio_duplex.txt .. include:: /shared/_includes/r5_desc_aio_duplex.txt
The bare metal AIO-DX deployment configuration may be extended with up to four The bare metal AIO-DX deployment configuration may be extended with up to four
worker nodes (not shown in the diagram). Installation instructions for worker nodes (not shown in the diagram). Installation instructions for
these additional nodes are described in :doc:`aio_duplex_extend`. these additional nodes are described in :doc:`aio_duplex_extend`.
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/r5_ipv6_note.txt
------------ ------------
Installation Installation

2
doc/source/deploy_install_guides/r5_release/bare_metal/aio_duplex_hardware.rst
View File

@ -31,7 +31,7 @@ host types are:
+-------------------------+-----------------------------------------------------------+ +-------------------------+-----------------------------------------------------------+
| Minimum memory | 64 GB | | Minimum memory | 64 GB |
+-------------------------+-----------------------------------------------------------+ +-------------------------+-----------------------------------------------------------+
| Primary disk | 500 GB SSD or NVMe (see :doc:`../../nvme_config`) | | Primary disk | 500 GB SSD or NVMe (see :ref:`nvme_config`) |
+-------------------------+-----------------------------------------------------------+ +-------------------------+-----------------------------------------------------------+
| Additional disks | - 1 or more 500 GB (min. 10K RPM) for Ceph OSD | | Additional disks | - 1 or more 500 GB (min. 10K RPM) for Ceph OSD |
| | - Recommended, but not required: 1 or more SSDs or NVMe | | | - Recommended, but not required: 1 or more SSDs or NVMe |

6
doc/source/deploy_install_guides/r5_release/bare_metal/aio_duplex_install_kubernetes.rst
View File

@ -30,7 +30,7 @@ Install Kubernetes Platform on All-in-one Duplex
Install software on controller-0 Install software on controller-0
-------------------------------- --------------------------------
.. include:: inc-install-software-on-controller.rest .. include:: /shared/_includes/r5_inc-install-software-on-controller.rest
:start-after: incl-install-software-controller-0-aio-start :start-after: incl-install-software-controller-0-aio-start
:end-before: incl-install-software-controller-0-aio-end :end-before: incl-install-software-controller-0-aio-end
@ -91,7 +91,7 @@ Bootstrap system on controller-0
.. only:: starlingx .. only:: starlingx
.. include:: ../ansible_install_time_only.txt .. include:: /shared/_includes/r5_ansible_install_time_only.txt
Specify the user configuration override file for the Ansible bootstrap Specify the user configuration override file for the Ansible bootstrap
playbook using one of the following methods: playbook using one of the following methods:
@ -1101,7 +1101,7 @@ machine.
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/r5_kubernetes_install_next.txt
.. only:: partner .. only:: partner

4
doc/source/deploy_install_guides/r5_release/bare_metal/aio_simplex.rst
View File

@ -6,9 +6,9 @@ Bare metal All-in-one Simplex Installation R5.0
Overview Overview
-------- --------
.. include:: ../desc_aio_simplex.txt .. include:: /shared/_includes/r5_desc_aio_simplex.txt
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/r5_ipv6_note.txt
------------ ------------
Installation Installation

68
doc/source/deploy_install_guides/r5_release/bare_metal/aio_simplex_hardware.rst
View File

@ -16,40 +16,40 @@ Minimum hardware requirements
The recommended minimum hardware requirements for bare metal servers for various The recommended minimum hardware requirements for bare metal servers for various
host types are: host types are:
+-------------------------+-----------------------------------------------------------+ +-------------------------+--------------------------------------------------------------------+
| Minimum Requirement | All-in-one Controller Node | | Minimum Requirement | All-in-one Controller Node |
+=========================+===========================================================+ +=========================+====================================================================+
| Number of servers | 1 | | Number of servers | 1 |
+-------------------------+-----------------------------------------------------------+ +-------------------------+--------------------------------------------------------------------+
| Minimum processor class | - Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) | | Minimum processor class | - Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) |
| | 8 cores/socket | | | 8 cores/socket |
| | | | | |
| | or | | | or |
| | | | | |
| | - Single-CPU Intel® Xeon® D-15xx family, 8 cores | | | - Single-CPU Intel® Xeon® D-15xx family, 8 cores |
| | (low-power/low-cost option) | | | (low-power/low-cost option) |
+-------------------------+-----------------------------------------------------------+ +-------------------------+--------------------------------------------------------------------+
| Minimum memory | 64 GB | | Minimum memory | 64 GB |
+-------------------------+-----------------------------------------------------------+ +-------------------------+--------------------------------------------------------------------+
| Primary disk | 500 GB SSD or NVMe (see :doc:`../../nvme_config`) | | Primary disk | 500 GB SSD or NVMe (see :ref:`nvme_config`) |
+-------------------------+-----------------------------------------------------------+ +-------------------------+--------------------------------------------------------------------+
| Additional disks | - 1 or more 500 GB (min. 10K RPM) for Ceph OSD | | Additional disks | - 1 or more 500 GB (min. 10K RPM) for Ceph OSD |
| | - Recommended, but not required: 1 or more SSDs or NVMe | | | - Recommended, but not required: 1 or more SSDs or NVMe |
| | drives for Ceph journals (min. 1024 MiB per OSD | | | drives for Ceph journals (min. 1024 MiB per OSD |
| | journal) | | | journal) |
| | - For OpenStack, recommend 1 or more 500 GB (min. 10K | | | - For OpenStack, recommend 1 or more 500 GB (min. 10K |
| | RPM) for VM local ephemeral storage | | | RPM) for VM local ephemeral storage |
+-------------------------+-----------------------------------------------------------+ +-------------------------+--------------------------------------------------------------------+
| Minimum network ports | - OAM: 1x1GE | | Minimum network ports | - OAM: 1x1GE |
| | - Data: 1 or more x 10GE | | | - Data: 1 or more x 10GE |
+-------------------------+-----------------------------------------------------------+ +-------------------------+--------------------------------------------------------------------+
| BIOS settings | - Hyper-Threading technology enabled | | BIOS settings | - Hyper-Threading technology enabled |
| | - Virtualization technology enabled | | | - Virtualization technology enabled |
| | - VT for directed I/O enabled | | | - VT for directed I/O enabled |
| | - CPU power and performance policy set to performance | | | - CPU power and performance policy set to performance |
| | - CPU C state control disabled | | | - CPU C state control disabled |
| | - Plug & play BMC detection disabled | | | - Plug & play BMC detection disabled |
+-------------------------+-----------------------------------------------------------+ +-------------------------+--------------------------------------------------------------------+
-------------------------- --------------------------
Prepare bare metal servers Prepare bare metal servers

6
doc/source/deploy_install_guides/r5_release/bare_metal/aio_simplex_install_kubernetes.rst
View File

@ -30,7 +30,7 @@ Install Kubernetes Platform on All-in-one Simplex
Install software on controller-0 Install software on controller-0
-------------------------------- --------------------------------
.. include:: inc-install-software-on-controller.rest .. include:: /shared/_includes/r5_inc-install-software-on-controller.rest
:start-after: incl-install-software-controller-0-aio-start :start-after: incl-install-software-controller-0-aio-start
:end-before: incl-install-software-controller-0-aio-end :end-before: incl-install-software-controller-0-aio-end
@ -91,7 +91,7 @@ Bootstrap system on controller-0
.. only:: starlingx .. only:: starlingx
.. include:: ../ansible_install_time_only.txt .. include:: /shared/_includes/r5_ansible_install_time_only.txt
Specify the user configuration override file for the Ansible bootstrap Specify the user configuration override file for the Ansible bootstrap
playbook using one of the following methods: playbook using one of the following methods:
@ -687,7 +687,7 @@ machine.
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include::/_includes/r5_kubernetes_install_next.txt
.. only:: partner .. only:: partner

4
doc/source/deploy_install_guides/r5_release/bare_metal/controller_storage.rst
View File

@ -6,9 +6,9 @@ Bare metal Standard with Controller Storage Installation R5.0
Overview Overview
-------- --------
.. include:: ../desc_controller_storage.txt .. include:: /shared/_includes/r5_desc_controller_storage.txt
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/r5_ipv6_note.txt
------------ ------------

2
doc/source/deploy_install_guides/r5_release/bare_metal/controller_storage_hardware.rst
View File

@ -28,7 +28,7 @@ host types are:
| Minimum memory | 64 GB | 32 GB | | Minimum memory | 64 GB | 32 GB |
+-------------------------+-----------------------------+-----------------------------+ +-------------------------+-----------------------------+-----------------------------+
| Primary disk | 500 GB SSD or NVMe (see | 120 GB (Minimum 10k RPM) | | Primary disk | 500 GB SSD or NVMe (see | 120 GB (Minimum 10k RPM) |
| | :doc:`../../nvme_config`) | | | | :ref:`nvme_config`) | |
+-------------------------+-----------------------------+-----------------------------+ +-------------------------+-----------------------------+-----------------------------+
| Additional disks | - 1 or more 500 GB (min. | - For OpenStack, recommend | | Additional disks | - 1 or more 500 GB (min. | - For OpenStack, recommend |
| | 10K RPM) for Ceph OSD | 1 or more 500 GB (min. | | | 10K RPM) for Ceph OSD | 1 or more 500 GB (min. |

6
doc/source/deploy_install_guides/r5_release/bare_metal/controller_storage_install_kubernetes.rst
View File

@ -26,7 +26,7 @@ Install Kubernetes Platform on Standard with Controller Storage
Install software on controller-0 Install software on controller-0
-------------------------------- --------------------------------
.. include:: inc-install-software-on-controller.rest .. include:: /shared/_includes/r5_inc-install-software-on-controller.rest
:start-after: incl-install-software-controller-0-standard-start :start-after: incl-install-software-controller-0-standard-start
:end-before: incl-install-software-controller-0-standard-end :end-before: incl-install-software-controller-0-standard-end
@ -90,7 +90,7 @@ Bootstrap system on controller-0
.. only:: starlingx .. only:: starlingx
.. include:: ../ansible_install_time_only.txt .. include:: /shared/_includes/r5_ansible_install_time_only.txt
Specify the user configuration override file for the Ansible bootstrap Specify the user configuration override file for the Ansible bootstrap
playbook using one of the following methods: playbook using one of the following methods:
@ -909,7 +909,7 @@ If configuring Ceph Storage Backend, Add Ceph OSDs to controllers
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/r5_kubernetes_install_next.txt
.. only:: partner .. only:: partner

4
doc/source/deploy_install_guides/r5_release/bare_metal/dedicated_storage.rst
View File

@ -7,9 +7,9 @@ Bare metal Standard with Dedicated Storage Installation R5.0
Overview Overview
-------- --------
.. include:: ../desc_dedicated_storage.txt .. include:: /shared/_includes/r5_desc_dedicated_storage.txt
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/r5_ipv6_note.txt
------------ ------------
Installation Installation

2
doc/source/deploy_install_guides/r5_release/bare_metal/dedicated_storage_hardware.rst
View File

@ -28,7 +28,7 @@ host types are:
| Minimum memory | 64 GB | 64 GB | 32 GB | | Minimum memory | 64 GB | 64 GB | 32 GB |
+---------------------+---------------------------+-----------------------+-----------------------+ +---------------------+---------------------------+-----------------------+-----------------------+
| Primary disk | 500 GB SSD or NVMe (see | 120 GB (min. 10k RPM) | 120 GB (min. 10k RPM) | | Primary disk | 500 GB SSD or NVMe (see | 120 GB (min. 10k RPM) | 120 GB (min. 10k RPM) |
| | :doc:`../../nvme_config`) | | | | | :ref:`nvme_config`) | | |
+---------------------+---------------------------+-----------------------+-----------------------+ +---------------------+---------------------------+-----------------------+-----------------------+
| Additional disks | None | - 1 or more 500 GB | - For OpenStack, | | Additional disks | None | - 1 or more 500 GB | - For OpenStack, |
| | | (min. 10K RPM) for | recommend 1 or more | | | | (min. 10K RPM) for | recommend 1 or more |

4
doc/source/deploy_install_guides/r5_release/bare_metal/dedicated_storage_install_kubernetes.rst
View File

@ -30,7 +30,7 @@ This section describes the steps to install the |prod| Kubernetes platform on a
Install software on controller-0 Install software on controller-0
-------------------------------- --------------------------------
.. include:: inc-install-software-on-controller.rest .. include:: /shared/_includes/r5_inc-install-software-on-controller.rest
:start-after: incl-install-software-controller-0-standard-start :start-after: incl-install-software-controller-0-standard-start
:end-before: incl-install-software-controller-0-standard-end :end-before: incl-install-software-controller-0-standard-end
@ -525,7 +525,7 @@ host machine.
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/r5_kubernetes_install_next.txt
.. only:: partner .. only:: partner

4
doc/source/deploy_install_guides/r5_release/bare_metal/ironic.rst
View File

@ -17,10 +17,10 @@ more bare metal servers.
.. note:: .. note::
If you are behind a corporate firewall or proxy, you need to set proxy If you are behind a corporate firewall or proxy, you need to set proxy
settings. Refer to :doc:`/../../configuration/docker_proxy_config` for settings. Refer to :ref:`docker_proxy_config` for
details. details.
.. figure:: ../figures/starlingx-deployment-options-ironic.png .. figure:: /deploy_install_guides/r5_release/figures/starlingx-deployment-options-ironic.png
:scale: 50% :scale: 50%
:alt: Standard with Ironic deployment configuration :alt: Standard with Ironic deployment configuration

4
doc/source/deploy_install_guides/r5_release/bare_metal/rook_storage.rst
View File

@ -6,9 +6,9 @@ Bare metal Standard with Rook Storage Installation R5.0
Overview Overview
-------- --------
.. include:: ../desc_rook_storage.txt .. include:: /shared/_includes/r5_desc_rook_storage.txt
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/r5_ipv6_note.txt
------------ ------------

2
doc/source/deploy_install_guides/r5_release/bare_metal/rook_storage_hardware.rst
View File

@ -29,7 +29,7 @@ host types are:
| Minimum memory | 64 GB | 64 GB | 32 GB | | Minimum memory | 64 GB | 64 GB | 32 GB |
+---------------------+---------------------------+-----------------------+-----------------------+ +---------------------+---------------------------+-----------------------+-----------------------+
| Primary disk | 500 GB SSD or NVMe (see | 120 GB (min. 10k RPM) | 120 GB (min. 10k RPM) | | Primary disk | 500 GB SSD or NVMe (see | 120 GB (min. 10k RPM) | 120 GB (min. 10k RPM) |
| | :doc:`../../nvme_config`) | | | | | :ref:`nvme_config`) | | |
+---------------------+---------------------------+-----------------------+-----------------------+ +---------------------+---------------------------+-----------------------+-----------------------+
| Additional disks | None | - 1 or more 500 GB | - For OpenStack, | | Additional disks | None | - 1 or more 500 GB | - For OpenStack, |
| | | (min. 10K RPM) for | recommend 1 or more | | | | (min. 10K RPM) for | recommend 1 or more |

12
doc/source/deploy_install_guides/r5_release/bare_metal/rook_storage_install_kubernetes.rst
View File

@ -16,8 +16,8 @@ configuration.
Create bootable USB Create bootable USB
------------------- -------------------
Refer to :doc:`/deploy_install_guides/bootable_usb` for instructions on how to Refer to :ref:`bootable_usb` for instructions on how to create a bootable USB
create a bootable USB with the StarlingX ISO on your system. with the StarlingX ISO on your system.
-------------------------------- --------------------------------
Install software on controller-0 Install software on controller-0
@ -100,7 +100,7 @@ Bootstrap system on controller-0
The default location where Ansible looks for and imports user The default location where Ansible looks for and imports user
configuration override files for hosts. For example: ``$HOME/<hostname>.yml``. configuration override files for hosts. For example: ``$HOME/<hostname>.yml``.
.. include:: ../ansible_install_time_only.txt .. include:: /shared/_includes/r5_ansible_install_time_only.txt
Specify the user configuration override file for the Ansible bootstrap Specify the user configuration override file for the Ansible bootstrap
playbook using one of the following methods: playbook using one of the following methods:
@ -151,7 +151,7 @@ Bootstrap system on controller-0
Refer to :doc:`/deploy_install_guides/r5_release/ansible_bootstrap_configs` Refer to :doc:`/deploy_install_guides/r5_release/ansible_bootstrap_configs`
for information on additional Ansible bootstrap configurations for advanced for information on additional Ansible bootstrap configurations for advanced
Ansible bootstrap scenarios, such as Docker proxies when deploying behind a Ansible bootstrap scenarios, such as Docker proxies when deploying behind a
firewall, etc. Refer to :doc:`/../../configuration/docker_proxy_config` for firewall, etc. Refer to :ref:`docker_proxy_config` for
details about Docker proxy settings. details about Docker proxy settings.
#. Run the Ansible bootstrap playbook: #. Run the Ansible bootstrap playbook:
@ -212,7 +212,7 @@ Configure controller-0
system service-parameter-list platform docker system service-parameter-list platform docker
#. Refer to :doc:`/../../configuration/docker_proxy_config` for #. Refer to :ref:`docker_proxy_config` for
details about Docker proxy settings. details about Docker proxy settings.
************************************* *************************************
@ -749,4 +749,4 @@ On host storage-0 and storage-1:
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/r5_kubernetes_install_next.txt

2
doc/source/deploy_install_guides/r5_release/distributed_cloud/index.rst
View File

@ -85,7 +85,7 @@ networks, as shown in Figure 1.
Alarms raised at the subclouds are sent to the SystemController for Alarms raised at the subclouds are sent to the SystemController for
central reporting. central reporting.
.. figure:: ../figures/starlingx-deployment-options-distributed-cloud.png .. figure:: /deploy_install_guides/r5_release/figures/starlingx-deployment-options-distributed-cloud.png
:scale: 45% :scale: 45%
:alt: Distributed cloud deployment configuration :alt: Distributed cloud deployment configuration

2
doc/source/deploy_install_guides/r5_release/kubernetes_access.rst
View File

@ -1,3 +1,5 @@
.. _kubernetes_access:
================================ ================================
Access StarlingX Kubernetes R5.0 Access StarlingX Kubernetes R5.0
================================ ================================

4
doc/source/deploy_install_guides/r5_release/openstack/access.rst
View File

@ -157,14 +157,14 @@ using the :command:`openstack` command. For example:
The image below shows a typical successful run. The image below shows a typical successful run.
.. figure:: ../figures/starlingx-access-openstack-flavorlist.png .. figure:: /deploy_install_guides/r5_release/figures/starlingx-access-openstack-flavorlist.png
:alt: starlingx-access-openstack-flavorlist :alt: starlingx-access-openstack-flavorlist
:scale: 50% :scale: 50%
*Figure 1: StarlingX OpenStack Flavorlist* *Figure 1: StarlingX OpenStack Flavorlist*
.. figure:: ../figures/starlingx-access-openstack-command.png .. figure:: /deploy_install_guides/r5_release/figures/starlingx-access-openstack-command.png
:alt: starlingx-access-openstack-command :alt: starlingx-access-openstack-command
:scale: 50% :scale: 50%

4
doc/source/deploy_install_guides/r5_release/virtual/aio_duplex.rst
View File

@ -6,9 +6,9 @@ Virtual All-in-one Duplex Installation R5.0
Overview Overview
-------- --------
.. include:: ../desc_aio_duplex.txt .. include:: /shared/_includes/r5_desc_aio_duplex.txt
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/r5_ipv6_note.txt
------------ ------------
Installation Installation

8
doc/source/deploy_install_guides/r5_release/virtual/aio_duplex_install_kubernetes.rst
View File

@ -84,7 +84,7 @@ On virtual controller-0:
The default location where Ansible looks for and imports user The default location where Ansible looks for and imports user
configuration override files for hosts. For example: ``$HOME/<hostname>.yml``. configuration override files for hosts. For example: ``$HOME/<hostname>.yml``.
.. include:: ../ansible_install_time_only.txt .. include:: /shared/_includes/r5_ansible_install_time_only.txt
Specify the user configuration override file for the Ansible bootstrap Specify the user configuration override file for the Ansible bootstrap
playbook using one of the following methods: playbook using one of the following methods:
@ -129,7 +129,7 @@ On virtual controller-0:
Refer to :doc:`/deploy_install_guides/r5_release/ansible_bootstrap_configs` Refer to :doc:`/deploy_install_guides/r5_release/ansible_bootstrap_configs`
for information on additional Ansible bootstrap configurations for advanced for information on additional Ansible bootstrap configurations for advanced
Ansible bootstrap scenarios, such as Docker proxies when deploying behind a Ansible bootstrap scenarios, such as Docker proxies when deploying behind a
firewall, etc. Refer to :doc:`/../../configuration/docker_proxy_config` for firewall, etc. Refer to :ref:`docker_proxy_config` for
details about Docker proxy settings. details about Docker proxy settings.
#. Run the Ansible bootstrap playbook: #. Run the Ansible bootstrap playbook:
@ -288,7 +288,7 @@ For Rook container-based Ceph:
system service-parameter-list platform docker system service-parameter-list platform docker
#. Refer to :doc:`/../../configuration/docker_proxy_config` for #. Refer to :ref:`docker_proxy_config` for
details about Docker proxy settings. details about Docker proxy settings.
************************************* *************************************
@ -579,4 +579,4 @@ On **virtual** controller-0 and controller-1:
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/r5_kubernetes_install_next.txt

4
doc/source/deploy_install_guides/r5_release/virtual/aio_simplex.rst
View File

@ -6,9 +6,9 @@ Virtual All-in-one Simplex Installation R5.0
Overview Overview
-------- --------
.. include:: ../desc_aio_simplex.txt .. include:: /shared/_includes/r5_desc_aio_simplex.txt
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/r5_ipv6_note.txt
------------ ------------
Installation Installation

8
doc/source/deploy_install_guides/r5_release/virtual/aio_simplex_install_kubernetes.rst
View File

@ -85,7 +85,7 @@ On virtual controller-0:
The default location where Ansible looks for and imports user The default location where Ansible looks for and imports user
configuration override files for hosts. For example: ``$HOME/<hostname>.yml``. configuration override files for hosts. For example: ``$HOME/<hostname>.yml``.
.. include:: ../ansible_install_time_only.txt .. include:: /shared/_includes/r5_ansible_install_time_only.txt
Specify the user configuration override file for the Ansible bootstrap Specify the user configuration override file for the Ansible bootstrap
playbook using one of the following methods: playbook using one of the following methods:
@ -128,7 +128,7 @@ On virtual controller-0:
Refer to :doc:`/deploy_install_guides/r5_release/ansible_bootstrap_configs` Refer to :doc:`/deploy_install_guides/r5_release/ansible_bootstrap_configs`
for information on additional Ansible bootstrap configurations for advanced for information on additional Ansible bootstrap configurations for advanced
Ansible bootstrap scenarios, such as Docker proxies when deploying behind a Ansible bootstrap scenarios, such as Docker proxies when deploying behind a
firewall, etc. Refer to :doc:`/../../configuration/docker_proxy_config` for firewall, etc. Refer to :ref:`docker_proxy_config` for
details about Docker proxy settings. details about Docker proxy settings.
#. Run the Ansible bootstrap playbook: #. Run the Ansible bootstrap playbook:
@ -279,7 +279,7 @@ For Rook container-based Ceph:
system service-parameter-list platform docker system service-parameter-list platform docker
#. Refer to :doc:`/../../configuration/docker_proxy_config` for #. Refer to :ref:`docker_proxy_config` for
details about Docker proxy settings. details about Docker proxy settings.
************************************* *************************************
@ -415,4 +415,4 @@ On **virtual** controller-0:
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/r5_kubernetes_install_next.txt

4
doc/source/deploy_install_guides/r5_release/virtual/controller_storage.rst
View File

@ -6,9 +6,9 @@ Virtual Standard with Controller Storage Installation R5.0
Overview Overview
-------- --------
.. include:: ../desc_controller_storage.txt .. include:: /shared/_includes/r5_desc_controller_storage.txt
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/r5_ipv6_note.txt
------------ ------------
Installation Installation

8
doc/source/deploy_install_guides/r5_release/virtual/controller_storage_install_kubernetes.rst
View File

@ -89,7 +89,7 @@ On virtual controller-0:
The default location where Ansible looks for and imports user The default location where Ansible looks for and imports user
configuration override files for hosts. For example: ``$HOME/<hostname>.yml``. configuration override files for hosts. For example: ``$HOME/<hostname>.yml``.
.. include:: ../ansible_install_time_only.txt .. include:: /shared/_includes/r5_ansible_install_time_only.txt
Specify the user configuration override file for the Ansible bootstrap Specify the user configuration override file for the Ansible bootstrap
playbook using one of the following methods: playbook using one of the following methods:
@ -134,7 +134,7 @@ On virtual controller-0:
Refer to :doc:`/deploy_install_guides/r5_release/ansible_bootstrap_configs` Refer to :doc:`/deploy_install_guides/r5_release/ansible_bootstrap_configs`
for information on additional Ansible bootstrap configurations for advanced for information on additional Ansible bootstrap configurations for advanced
Ansible bootstrap scenarios, such as Docker proxies when deploying behind a Ansible bootstrap scenarios, such as Docker proxies when deploying behind a
firewall, etc. Refer to :doc:`/../../configuration/docker_proxy_config` for firewall, etc. Refer to :ref:`docker_proxy_config` for
details about Docker proxy settings. details about Docker proxy settings.
#. Run the Ansible bootstrap playbook: #. Run the Ansible bootstrap playbook:
@ -215,7 +215,7 @@ On virtual controller-0:
system service-parameter-list platform docker system service-parameter-list platform docker
#. Refer to :doc:`/../../configuration/docker_proxy_config` for #. Refer to :ref:`docker_proxy_config` for
details about Docker proxy settings. details about Docker proxy settings.
************************************* *************************************
@ -597,4 +597,4 @@ On virtual controller-0:
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/r5_kubernetes_install_next.txt

4
doc/source/deploy_install_guides/r5_release/virtual/dedicated_storage.rst
View File

@ -6,9 +6,9 @@ Virtual Standard with Dedicated Storage Installation R5.0
Overview Overview
-------- --------
.. include:: ../desc_dedicated_storage.txt .. include:: /shared/_includes/r5_desc_dedicated_storage.txt
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/r5_ipv6_note.txt
------------ ------------
Installation Installation

2
doc/source/deploy_install_guides/r5_release/virtual/dedicated_storage_install_kubernetes.rst
View File

@ -399,4 +399,4 @@ Unlock worker nodes
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/r5_kubernetes_install_next.txt

4
doc/source/deploy_install_guides/r5_release/virtual/install_virtualbox.rst
View File

@ -324,7 +324,7 @@ Controller Node Install vs Graphics Controller Node Install), and hitting the
tab key to allow command line modification. The example below shows how to tab key to allow command line modification. The example below shows how to
modify the ``rootfs_device`` specification. modify the ``rootfs_device`` specification.
.. figure:: ../figures/install_virtualbox_configparms.png .. figure:: /deploy_install_guides/r5_release/figures/install_virtualbox_configparms.png
:scale: 100% :scale: 100%
:alt: Install controller-0 :alt: Install controller-0
@ -361,6 +361,6 @@ If you’d prefer to install to the second disk on your node, use the command:
Alternatively, these values can be set from the GUI via the ``Edit Host`` Alternatively, these values can be set from the GUI via the ``Edit Host``
option. option.
.. figure:: ../figures/install_virtualbox_guiscreen.png .. figure:: /deploy_install_guides/r5_release/figures/install_virtualbox_guiscreen.png
:scale: 100% :scale: 100%
:alt: Install controller-0 :alt: Install controller-0

4
doc/source/deploy_install_guides/r5_release/virtual/rook_storage.rst
View File

@ -6,9 +6,9 @@ Virtual Standard with Rook Storage Installation R5.0
Overview Overview
-------- --------
.. include:: ../desc_rook_storage.txt .. include:: /shared/_includes/r5_desc_rook_storage.txt
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/r5_ipv6_note.txt
------------ ------------
Installation Installation

2
doc/source/deploy_install_guides/r5_release/virtual/rook_storage_install_kubernetes.rst
View File

@ -543,4 +543,4 @@ On virtual storage-0 and storage-1:
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/r5_kubernetes_install_next.txt

4
doc/source/deploy_install_guides/r6_release/bare_metal/aio_duplex.rst
View File

@ -6,13 +6,13 @@ Bare metal All-in-one Duplex Installation R6.0
Overview Overview
-------- --------
.. include:: ../desc_aio_duplex.txt .. include:: /shared/_includes/desc_aio_duplex.txt
The bare metal AIO-DX deployment configuration may be extended with up to four The bare metal AIO-DX deployment configuration may be extended with up to four
worker nodes (not shown in the diagram). Installation instructions for worker nodes (not shown in the diagram). Installation instructions for
these additional nodes are described in :doc:`aio_duplex_extend`. these additional nodes are described in :doc:`aio_duplex_extend`.
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/ipv6_note.txt
------------ ------------
Installation Installation

2
doc/source/deploy_install_guides/r6_release/bare_metal/aio_duplex_hardware.rst
View File

@ -31,7 +31,7 @@ host types are:
+-------------------------+-----------------------------------------------------------+ +-------------------------+-----------------------------------------------------------+
| Minimum memory | 64 GB | | Minimum memory | 64 GB |
+-------------------------+-----------------------------------------------------------+ +-------------------------+-----------------------------------------------------------+
| Primary disk | 500 GB SSD or NVMe (see :doc:`../../nvme_config`) | | Primary disk | 500 GB SSD or NVMe (see :ref:`nvme_config`) |
+-------------------------+-----------------------------------------------------------+ +-------------------------+-----------------------------------------------------------+
| Additional disks | - 1 or more 500 GB (min. 10K RPM) for Ceph OSD | | Additional disks | - 1 or more 500 GB (min. 10K RPM) for Ceph OSD |
| | - Recommended, but not required: 1 or more SSDs or NVMe | | | - Recommended, but not required: 1 or more SSDs or NVMe |

6
doc/source/deploy_install_guides/r6_release/bare_metal/aio_duplex_install_kubernetes.rst
View File

@ -30,7 +30,7 @@ Install Kubernetes Platform on All-in-one Duplex
Install software on controller-0 Install software on controller-0
-------------------------------- --------------------------------
.. include:: inc-install-software-on-controller.rest .. include:: /shared/_includes/inc-install-software-on-controller.rest
:start-after: incl-install-software-controller-0-aio-start :start-after: incl-install-software-controller-0-aio-start
:end-before: incl-install-software-controller-0-aio-end :end-before: incl-install-software-controller-0-aio-end
@ -91,7 +91,7 @@ Bootstrap system on controller-0
.. only:: starlingx .. only:: starlingx
.. include:: ../ansible_install_time_only.txt .. include:: /_includes/ansible_install_time_only.txt
Specify the user configuration override file for the Ansible bootstrap Specify the user configuration override file for the Ansible bootstrap
playbook using one of the following methods: playbook using one of the following methods:
@ -1133,7 +1133,7 @@ machine.
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/kubernetes_install_next.txt
.. only:: partner .. only:: partner

4
doc/source/deploy_install_guides/r6_release/bare_metal/aio_simplex.rst
View File

@ -6,9 +6,9 @@ Bare metal All-in-one Simplex Installation R6.0
Overview Overview
-------- --------
.. include:: ../desc_aio_simplex.txt .. include:: /shared/_includes/desc_aio_simplex.txt
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/ipv6_note.txt
------------ ------------
Installation Installation

2
doc/source/deploy_install_guides/r6_release/bare_metal/aio_simplex_hardware.rst
View File

@ -31,7 +31,7 @@ host types are:
+-------------------------+-----------------------------------------------------------+ +-------------------------+-----------------------------------------------------------+
| Minimum memory | 64 GB | | Minimum memory | 64 GB |
+-------------------------+-----------------------------------------------------------+ +-------------------------+-----------------------------------------------------------+
| Primary disk | 500 GB SSD or NVMe (see :doc:`../../nvme_config`) | | Primary disk | 500 GB SSD or NVMe (see :ref:`nvme_config`) |
+-------------------------+-----------------------------------------------------------+ +-------------------------+-----------------------------------------------------------+
| Additional disks | - 1 or more 500 GB (min. 10K RPM) for Ceph OSD | | Additional disks | - 1 or more 500 GB (min. 10K RPM) for Ceph OSD |
| | - Recommended, but not required: 1 or more SSDs or NVMe | | | - Recommended, but not required: 1 or more SSDs or NVMe |

6
doc/source/deploy_install_guides/r6_release/bare_metal/aio_simplex_install_kubernetes.rst
View File

@ -30,7 +30,7 @@ Install Kubernetes Platform on All-in-one Simplex
Install software on controller-0 Install software on controller-0
-------------------------------- --------------------------------
.. include:: inc-install-software-on-controller.rest .. include:: /shared/_includes/inc-install-software-on-controller.rest
:start-after: incl-install-software-controller-0-aio-start :start-after: incl-install-software-controller-0-aio-start
:end-before: incl-install-software-controller-0-aio-end :end-before: incl-install-software-controller-0-aio-end
@ -91,7 +91,7 @@ Bootstrap system on controller-0
.. only:: starlingx .. only:: starlingx
.. include:: ../ansible_install_time_only.txt .. include:: /_includes/ansible_install_time_only.txt
Specify the user configuration override file for the Ansible bootstrap Specify the user configuration override file for the Ansible bootstrap
playbook using one of the following methods: playbook using one of the following methods:
@ -700,7 +700,7 @@ machine.
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/kubernetes_install_next.txt
.. only:: partner .. only:: partner

4
doc/source/deploy_install_guides/r6_release/bare_metal/controller_storage.rst
View File

@ -6,9 +6,9 @@ Bare metal Standard with Controller Storage Installation R6.0
Overview Overview
-------- --------
.. include:: ../desc_controller_storage.txt .. include:: /shared/_includes/desc_controller_storage.txt
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/ipv6_note.txt
------------ ------------

2
doc/source/deploy_install_guides/r6_release/bare_metal/controller_storage_hardware.rst
View File

@ -28,7 +28,7 @@ host types are:
| Minimum memory | 64 GB | 32 GB | | Minimum memory | 64 GB | 32 GB |
+-------------------------+-----------------------------+-----------------------------+ +-------------------------+-----------------------------+-----------------------------+
| Primary disk | 500 GB SSD or NVMe (see | 120 GB (Minimum 10k RPM) | | Primary disk | 500 GB SSD or NVMe (see | 120 GB (Minimum 10k RPM) |
| | :doc:`../../nvme_config`) | | | | :ref:`nvme_config`) | |
+-------------------------+-----------------------------+-----------------------------+ +-------------------------+-----------------------------+-----------------------------+
| Additional disks | - 1 or more 500 GB (min. | - For OpenStack, recommend | | Additional disks | - 1 or more 500 GB (min. | - For OpenStack, recommend |
| | 10K RPM) for Ceph OSD | 1 or more 500 GB (min. | | | 10K RPM) for Ceph OSD | 1 or more 500 GB (min. |

6
doc/source/deploy_install_guides/r6_release/bare_metal/controller_storage_install_kubernetes.rst
View File

@ -26,7 +26,7 @@ Install Kubernetes Platform on Standard with Controller Storage
Install software on controller-0 Install software on controller-0
-------------------------------- --------------------------------
.. include:: inc-install-software-on-controller.rest .. include:: /shared/_includes/inc-install-software-on-controller.rest
:start-after: incl-install-software-controller-0-standard-start :start-after: incl-install-software-controller-0-standard-start
:end-before: incl-install-software-controller-0-standard-end :end-before: incl-install-software-controller-0-standard-end
@ -90,7 +90,7 @@ Bootstrap system on controller-0
.. only:: starlingx .. only:: starlingx
.. include:: ../ansible_install_time_only.txt .. include:: /_includes/ansible_install_time_only.txt
Specify the user configuration override file for the Ansible bootstrap Specify the user configuration override file for the Ansible bootstrap
playbook using one of the following methods: playbook using one of the following methods:
@ -929,7 +929,7 @@ If configuring Ceph Storage Backend, Add Ceph OSDs to controllers
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/kubernetes_install_next.txt
.. only:: partner .. only:: partner

4
doc/source/deploy_install_guides/r6_release/bare_metal/dedicated_storage.rst
View File

@ -7,9 +7,9 @@ Bare metal Standard with Dedicated Storage Installation R6.0
Overview Overview
-------- --------
.. include:: ../desc_dedicated_storage.txt .. include:: /shared/_includes/desc_dedicated_storage.txt
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/ipv6_note.txt
------------ ------------
Installation Installation

2
doc/source/deploy_install_guides/r6_release/bare_metal/dedicated_storage_hardware.rst
View File

@ -28,7 +28,7 @@ host types are:
| Minimum memory | 64 GB | 64 GB | 32 GB | | Minimum memory | 64 GB | 64 GB | 32 GB |
+---------------------+---------------------------+-----------------------+-----------------------+ +---------------------+---------------------------+-----------------------+-----------------------+
| Primary disk | 500 GB SSD or NVMe (see | 120 GB (min. 10k RPM) | 120 GB (min. 10k RPM) | | Primary disk | 500 GB SSD or NVMe (see | 120 GB (min. 10k RPM) | 120 GB (min. 10k RPM) |
| | :doc:`../../nvme_config`) | | | | | :ref:`nvme_config`) | | |
+---------------------+---------------------------+-----------------------+-----------------------+ +---------------------+---------------------------+-----------------------+-----------------------+
| Additional disks | None | - 1 or more 500 GB | - For OpenStack, | | Additional disks | None | - 1 or more 500 GB | - For OpenStack, |
| | | (min. 10K RPM) for | recommend 1 or more | | | | (min. 10K RPM) for | recommend 1 or more |

4
doc/source/deploy_install_guides/r6_release/bare_metal/dedicated_storage_install_kubernetes.rst
View File

@ -30,7 +30,7 @@ This section describes the steps to install the |prod| Kubernetes platform on a
Install software on controller-0 Install software on controller-0
-------------------------------- --------------------------------
.. include:: inc-install-software-on-controller.rest .. include:: /shared/_includes/inc-install-software-on-controller.rest
:start-after: incl-install-software-controller-0-standard-start :start-after: incl-install-software-controller-0-standard-start
:end-before: incl-install-software-controller-0-standard-end :end-before: incl-install-software-controller-0-standard-end
@ -547,7 +547,7 @@ host machine.
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/kubernetes_install_next.txt
.. only:: partner .. only:: partner

4
doc/source/deploy_install_guides/r6_release/bare_metal/ironic.rst
View File

@ -17,10 +17,10 @@ more bare metal servers.
.. note:: .. note::
If you are behind a corporate firewall or proxy, you need to set proxy If you are behind a corporate firewall or proxy, you need to set proxy
settings. Refer to :doc:`/../../configuration/docker_proxy_config` for settings. Refer to :ref:`docker_proxy_config` for
details. details.
.. figure:: ../figures/starlingx-deployment-options-ironic.png .. figure:: /deploy_install_guides/r6_release/figures/starlingx-deployment-options-ironic.png
:scale: 50% :scale: 50%
:alt: Standard with Ironic deployment configuration :alt: Standard with Ironic deployment configuration

4
doc/source/deploy_install_guides/r6_release/bare_metal/rook_storage.rst
View File

@ -6,9 +6,9 @@ Bare metal Standard with Rook Storage Installation R6.0
Overview Overview
-------- --------
.. include:: ../desc_rook_storage.txt .. include:: /shared/_includes/desc_rook_storage.txt
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/ipv6_note.txt
------------ ------------

2
doc/source/deploy_install_guides/r6_release/bare_metal/rook_storage_hardware.rst
View File

@ -29,7 +29,7 @@ host types are:
| Minimum memory | 64 GB | 64 GB | 32 GB | | Minimum memory | 64 GB | 64 GB | 32 GB |
+---------------------+---------------------------+-----------------------+-----------------------+ +---------------------+---------------------------+-----------------------+-----------------------+
| Primary disk | 500 GB SSD or NVMe (see | 120 GB (min. 10k RPM) | 120 GB (min. 10k RPM) | | Primary disk | 500 GB SSD or NVMe (see | 120 GB (min. 10k RPM) | 120 GB (min. 10k RPM) |
| | :doc:`../../nvme_config`) | | | | | :ref:`nvme_config`) | | |
+---------------------+---------------------------+-----------------------+-----------------------+ +---------------------+---------------------------+-----------------------+-----------------------+
| Additional disks | None | - 1 or more 500 GB | - For OpenStack, | | Additional disks | None | - 1 or more 500 GB | - For OpenStack, |
| | | (min. 10K RPM) for | recommend 1 or more | | | | (min. 10K RPM) for | recommend 1 or more |

6
doc/source/deploy_install_guides/r6_release/bare_metal/rook_storage_install_kubernetes.rst
View File

@ -98,7 +98,7 @@ Bootstrap system on controller-0
The default location where Ansible looks for and imports user The default location where Ansible looks for and imports user
configuration override files for hosts. For example: ``$HOME/<hostname>.yml``. configuration override files for hosts. For example: ``$HOME/<hostname>.yml``.
.. include:: ../ansible_install_time_only.txt .. include:: /_includes/ansible_install_time_only.txt
Specify the user configuration override file for the Ansible bootstrap Specify the user configuration override file for the Ansible bootstrap
playbook using one of the following methods: playbook using one of the following methods:
@ -210,7 +210,7 @@ Configure controller-0
system service-parameter-list platform docker system service-parameter-list platform docker
#. Refer to :doc:`/../../configuration/docker_proxy_config` for #. Refer to :ref:`docker_proxy_config` for
details about Docker proxy settings. details about Docker proxy settings.
************************************* *************************************
@ -748,4 +748,4 @@ On host storage-0 and storage-1:
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/kubernetes_install_next.txt

2
doc/source/deploy_install_guides/r6_release/distributed_cloud/index.rst
View File

@ -87,7 +87,7 @@ networks, as shown in Figure 1.
Alarms raised at the subclouds are sent to the System Controller for Alarms raised at the subclouds are sent to the System Controller for
central reporting. central reporting.
.. figure:: ../figures/starlingx-deployment-options-distributed-cloud.png .. figure:: /deploy_install_guides/r6_release/figures/starlingx-deployment-options-distributed-cloud.png
:scale: 45% :scale: 45%
:alt: Distributed cloud deployment configuration :alt: Distributed cloud deployment configuration

4
doc/source/deploy_install_guides/r6_release/openstack/access.rst
View File

@ -157,14 +157,14 @@ using the :command:`openstack` command. For example:
The image below shows a typical successful run. The image below shows a typical successful run.
.. figure:: ../figures/starlingx-access-openstack-flavorlist.png .. figure:: /deploy_install_guides/r6_release/figures/starlingx-access-openstack-flavorlist.png
:alt: starlingx-access-openstack-flavorlist :alt: starlingx-access-openstack-flavorlist
:scale: 50% :scale: 50%
*Figure 1: StarlingX OpenStack Flavorlist* *Figure 1: StarlingX OpenStack Flavorlist*
.. figure:: ../figures/starlingx-access-openstack-command.png .. figure:: /deploy_install_guides/r6_release/figures/starlingx-access-openstack-command.png
:alt: starlingx-access-openstack-command :alt: starlingx-access-openstack-command
:scale: 50% :scale: 50%

4
doc/source/deploy_install_guides/r6_release/virtual/aio_duplex.rst
View File

@ -6,9 +6,9 @@ Virtual All-in-one Duplex Installation R6.0
Overview Overview
-------- --------
.. include:: ../desc_aio_duplex.txt .. include:: /shared/_includes/desc_aio_duplex.txt
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/ipv6_note.txt
------------ ------------
Installation Installation

6
doc/source/deploy_install_guides/r6_release/virtual/aio_duplex_install_kubernetes.rst
View File

@ -84,7 +84,7 @@ On virtual controller-0:
The default location where Ansible looks for and imports user The default location where Ansible looks for and imports user
configuration override files for hosts. For example: ``$HOME/<hostname>.yml``. configuration override files for hosts. For example: ``$HOME/<hostname>.yml``.
.. include:: ../ansible_install_time_only.txt .. include:: /_includes/ansible_install_time_only.txt
Specify the user configuration override file for the Ansible bootstrap Specify the user configuration override file for the Ansible bootstrap
playbook using one of the following methods: playbook using one of the following methods:
@ -288,7 +288,7 @@ For Rook container-based Ceph:
system service-parameter-list platform docker system service-parameter-list platform docker
#. Refer to :doc:`/../../configuration/docker_proxy_config` for #. Refer to :ref:`docker_proxy_config` for
details about Docker proxy settings. details about Docker proxy settings.
************************************* *************************************
@ -579,4 +579,4 @@ On **virtual** controller-0 and controller-1:
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/kubernetes_install_next.txt

4
doc/source/deploy_install_guides/r6_release/virtual/aio_simplex.rst
View File

@ -6,9 +6,9 @@ Virtual All-in-one Simplex Installation R6.0
Overview Overview
-------- --------
.. include:: ../desc_aio_simplex.txt .. include:: /shared/_includes/desc_aio_simplex.txt
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/ipv6_note.txt
------------ ------------
Installation Installation

6
doc/source/deploy_install_guides/r6_release/virtual/aio_simplex_install_kubernetes.rst
View File

@ -85,7 +85,7 @@ On virtual controller-0:
The default location where Ansible looks for and imports user The default location where Ansible looks for and imports user
configuration override files for hosts. For example: ``$HOME/<hostname>.yml``. configuration override files for hosts. For example: ``$HOME/<hostname>.yml``.
.. include:: ../ansible_install_time_only.txt .. include:: /_includes/ansible_install_time_only.txt
Specify the user configuration override file for the Ansible bootstrap Specify the user configuration override file for the Ansible bootstrap
playbook using one of the following methods: playbook using one of the following methods:
@ -279,7 +279,7 @@ For Rook container-based Ceph:
system service-parameter-list platform docker system service-parameter-list platform docker
#. Refer to :doc:`/../../configuration/docker_proxy_config` for #. Refer to :ref:`docker_proxy_config` for
details about Docker proxy settings. details about Docker proxy settings.
************************************* *************************************
@ -415,4 +415,4 @@ On **virtual** controller-0:
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/kubernetes_install_next.txt

4
doc/source/deploy_install_guides/r6_release/virtual/controller_storage.rst
View File

@ -6,9 +6,9 @@ Virtual Standard with Controller Storage Installation R6.0
Overview Overview
-------- --------
.. include:: ../desc_controller_storage.txt .. include:: /shared/_includes/desc_controller_storage.txt
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/ipv6_note.txt
------------ ------------
Installation Installation

6
doc/source/deploy_install_guides/r6_release/virtual/controller_storage_install_kubernetes.rst
View File

@ -89,7 +89,7 @@ On virtual controller-0:
The default location where Ansible looks for and imports user The default location where Ansible looks for and imports user
configuration override files for hosts. For example: ``$HOME/<hostname>.yml``. configuration override files for hosts. For example: ``$HOME/<hostname>.yml``.
.. include:: ../ansible_install_time_only.txt .. include:: /_includes/ansible_install_time_only.txt
Specify the user configuration override file for the Ansible bootstrap Specify the user configuration override file for the Ansible bootstrap
playbook using one of the following methods: playbook using one of the following methods:
@ -215,7 +215,7 @@ On virtual controller-0:
system service-parameter-list platform docker system service-parameter-list platform docker
#. Refer to :doc:`/../../configuration/docker_proxy_config` for #. Refer to :ref:`docker_proxy_config` for
details about Docker proxy settings. details about Docker proxy settings.
************************************* *************************************
@ -597,4 +597,4 @@ On virtual controller-0:
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/kubernetes_install_next.txt

4
doc/source/deploy_install_guides/r6_release/virtual/dedicated_storage.rst
View File

@ -6,9 +6,9 @@ Virtual Standard with Dedicated Storage Installation R6.0
Overview Overview
-------- --------
.. include:: ../desc_dedicated_storage.txt .. include:: /shared/_includes/desc_dedicated_storage.txt
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/ipv6_note.txt
------------ ------------
Installation Installation

2
doc/source/deploy_install_guides/r6_release/virtual/dedicated_storage_install_kubernetes.rst
View File

@ -399,4 +399,4 @@ Unlock worker nodes
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/kubernetes_install_next.txt

4
doc/source/deploy_install_guides/r6_release/virtual/install_virtualbox.rst
View File

@ -324,7 +324,7 @@ Controller Node Install vs Graphics Controller Node Install), and hitting the
tab key to allow command line modification. The example below shows how to tab key to allow command line modification. The example below shows how to
modify the ``rootfs_device`` specification. modify the ``rootfs_device`` specification.
.. figure:: ../figures/install_virtualbox_configparms.png .. figure:: /deploy_install_guides/r6_release/figures/install_virtualbox_configparms.png
:scale: 100% :scale: 100%
:alt: Install controller-0 :alt: Install controller-0
@ -361,6 +361,6 @@ If you’d prefer to install to the second disk on your node, use the command:
Alternatively, these values can be set from the GUI via the ``Edit Host`` Alternatively, these values can be set from the GUI via the ``Edit Host``
option. option.
.. figure:: ../figures/install_virtualbox_guiscreen.png .. figure:: /deploy_install_guides/r6_release/figures/install_virtualbox_guiscreen.png
:scale: 100% :scale: 100%
:alt: Install controller-0 :alt: Install controller-0

4
doc/source/deploy_install_guides/r6_release/virtual/rook_storage.rst
View File

@ -6,9 +6,9 @@ Virtual Standard with Rook Storage Installation R6.0
Overview Overview
-------- --------
.. include:: ../desc_rook_storage.txt .. include:: /shared/_includes/desc_rook_storage.txt
.. include:: ../ipv6_note.txt .. include:: /shared/_includes/ipv6_note.txt
------------ ------------
Installation Installation

2
doc/source/deploy_install_guides/r6_release/virtual/rook_storage_install_kubernetes.rst
View File

@ -543,4 +543,4 @@ On virtual storage-0 and storage-1:
Next steps Next steps
---------- ----------
.. include:: ../kubernetes_install_next.txt .. include:: /_includes/kubernetes_install_next.txt

2
doc/source/developer_resources/backup_restore.rst
View File

@ -182,7 +182,7 @@ The backup contains the following:
* Docker registries on controller * Docker registries on controller
* Docker proxy (See :doc:`../configuration/docker_proxy_config` for details.) * Docker proxy (See :ref:`docker_proxy_config` for details.)
* Backup data: * Backup data:

2
doc/source/developer_resources/debug_issues.rst
View File

@ -111,7 +111,7 @@ Implement fixes
* Make the changes in your *development workspace* with the StarlingX * Make the changes in your *development workspace* with the StarlingX
codebase. codebase.
* Build the related packages using ``build-pkgs <package_name>``. * Build the related packages using ``build-pkgs <package_name>``.
* Create and apply the patch using the :doc:`starlingx_patching` guide. * Create and apply the patch using the :ref:`starlingx_patching` guide.
* Restart the services using the ``systemctl`` command or the StarlingX * Restart the services using the ``systemctl`` command or the StarlingX
``sm`` (service management) command. ``sm`` (service management) command.

2
doc/source/developer_resources/starlingx_patching.rst
View File

@ -1,3 +1,5 @@
.. _starlingx_patching:
================== ==================
StarlingX patching StarlingX patching
================== ==================

2
doc/source/developer_resources/stx_ipv6_deployment.rst
View File

@ -1,3 +1,5 @@
.. _stx_ipv6_deployment:
========================= =========================
StarlingX IPv6 Deployment StarlingX IPv6 Deployment
========================= =========================

2
doc/source/fault-mgmt/kubernetes/100-series-alarm-messages.rst
View File

@ -10,7 +10,7 @@ The system inventory and maintenance service reports system changes with
different degrees of severity. Use the reported alarms to monitor the overall different degrees of severity. Use the reported alarms to monitor the overall
health of the system. health of the system.
.. include:: ../../_includes/x00-series-alarm-messages.rest .. include:: /_includes/x00-series-alarm-messages.rest
.. _100-series-alarm-messages-table-zrd-tg5-v5: .. _100-series-alarm-messages-table-zrd-tg5-v5:

2
doc/source/fault-mgmt/kubernetes/200-series-alarm-messages.rst
View File

@ -10,7 +10,7 @@ The system inventory and maintenance service reports system changes with
different degrees of severity. Use the reported alarms to monitor the overall different degrees of severity. Use the reported alarms to monitor the overall
health of the system. health of the system.
.. include:: ../../_includes/x00-series-alarm-messages.rest .. include:: /_includes/x00-series-alarm-messages.rest
.. _200-series-alarm-messages-table-zrd-tg5-v5: .. _200-series-alarm-messages-table-zrd-tg5-v5:

2
doc/source/fault-mgmt/kubernetes/300-series-alarm-messages.rst
View File

@ -10,7 +10,7 @@ The system inventory and maintenance service reports system changes with
different degrees of severity. Use the reported alarms to monitor the different degrees of severity. Use the reported alarms to monitor the
overall health of the system. overall health of the system.
.. include:: ../../_includes/x00-series-alarm-messages.rest .. include:: /_includes/x00-series-alarm-messages.rest
.. _300-series-alarm-messages-table-zrd-tg5-v5: .. _300-series-alarm-messages-table-zrd-tg5-v5:

2
doc/source/fault-mgmt/kubernetes/400-series-alarm-messages.rst
View File

@ -10,7 +10,7 @@ The system inventory and maintenance service reports system changes with
different degrees of severity. Use the reported alarms to monitor the overall different degrees of severity. Use the reported alarms to monitor the overall
health of the system. health of the system.
.. include:: ../../_includes/x00-series-alarm-messages.rest .. include:: /_includes/x00-series-alarm-messages.rest
.. _400-series-alarm-messages-table-zrd-tg5-v5: .. _400-series-alarm-messages-table-zrd-tg5-v5:

2
doc/source/fault-mgmt/kubernetes/500-series-alarm-messages.rst
View File

@ -10,7 +10,7 @@ The system inventory and maintenance service reports system changes with
different degrees of severity. Use the reported alarms to monitor the overall different degrees of severity. Use the reported alarms to monitor the overall
health of the system. health of the system.
.. include:: ../../_includes/x00-series-alarm-messages.rest .. include:: /_includes/x00-series-alarm-messages.rest
.. _500-series-alarm-messages-table-zrd-tg5-v5: .. _500-series-alarm-messages-table-zrd-tg5-v5:

2
doc/source/fault-mgmt/kubernetes/750-series-alarm-messages.rst
View File

@ -10,7 +10,7 @@ The system inventory and maintenance service reports system changes with
different degrees of severity. Use the reported alarms to monitor the overall different degrees of severity. Use the reported alarms to monitor the overall
health of the system. health of the system.
.. include:: ../../_includes/x00-series-alarm-messages.rest .. include:: /_includes/x00-series-alarm-messages.rest
.. _750-series-alarm-messages-table-zrd-tg5-v5: .. _750-series-alarm-messages-table-zrd-tg5-v5:

2
doc/source/fault-mgmt/kubernetes/800-series-alarm-messages.rst
View File

@ -10,7 +10,7 @@ The system inventory and maintenance service reports system changes with
different degrees of severity. Use the reported alarms to monitor the overall different degrees of severity. Use the reported alarms to monitor the overall
health of the system. health of the system.
.. include:: ../../_includes/x00-series-alarm-messages.rest .. include:: /_includes/x00-series-alarm-messages.rest
.. _800-series-alarm-messages-table-zrd-tg5-v5: .. _800-series-alarm-messages-table-zrd-tg5-v5:

2
doc/source/fault-mgmt/kubernetes/900-series-alarm-messages.rst
View File

@ -10,7 +10,7 @@ The system inventory and maintenance service reports system changes with
different degrees of severity. Use the reported alarms to monitor the overall different degrees of severity. Use the reported alarms to monitor the overall
health of the system. health of the system.
.. include:: ../../_includes/x00-series-alarm-messages.rest .. include:: /_includes/x00-series-alarm-messages.rest
.. _900-series-alarm-messages-table-zrd-tg5-v5: .. _900-series-alarm-messages-table-zrd-tg5-v5:

2
doc/source/fault-mgmt/kubernetes/events-suppression-overview.rst
View File

@ -28,6 +28,6 @@ You can sort events by clicking the **Event ID**, **Description**, and
**Status** column headers. You can also use these as filtering criteria **Status** column headers. You can also use these as filtering criteria
from the **Search** field. from the **Search** field.
.. figure:: ../figures/uty1463514747661.png .. figure:: /shared/figures/fault-mgmt/uty1463514747661.png
:scale: 70 % :scale: 70 %
:alt: Event Suppression :alt: Event Suppression

2
doc/source/fault-mgmt/kubernetes/suppressing-and-unsuppressing-events.rst
View File

@ -34,4 +34,4 @@ You can set events to a suppressed state and toggle them back to unsuppressed.
replaced by **Unsuppress Event**, providing a way to toggle the event back replaced by **Unsuppress Event**, providing a way to toggle the event back
to unsuppressed. to unsuppressed.
.. image:: ../figures/nlc1463584178366.png .. image:: /shared/figures/fault-mgmt/nlc1463584178366.png

2
doc/source/fault-mgmt/kubernetes/the-global-alarm-banner.rst
View File

@ -14,7 +14,7 @@ that is always visible, regardless of what page you are on in the GUI. The
banner provides a color-coded snapshot of current active alarm counts for each banner provides a color-coded snapshot of current active alarm counts for each
alarm severity. alarm severity.
.. image:: ../figures/xyj1558447807645.png .. image:: /shared/figures/fault-mgmt/xyj1558447807645.png
.. note:: .. note::
Suppressed alarms are not shown. For more about suppressed alarms, see Suppressed alarms are not shown. For more about suppressed alarms, see

2
doc/source/fault-mgmt/kubernetes/troubleshooting-log-collection.rst
View File

@ -96,4 +96,4 @@ Collect Tool Caveats and Usage
.. only:: partner .. only:: partner
.. include:: ../../_includes/troubleshooting-log-collection.rest .. include:: /_includes/troubleshooting-log-collection.rest

2
doc/source/fault-mgmt/kubernetes/viewing-the-event-log-using-horizon.rst
View File

@ -45,7 +45,7 @@ buffer, with older entries discarded as needed to release logging space.
The **Suppression Status** column is only shown in the table when The **Suppression Status** column is only shown in the table when
**Show Suppressed** filter button is selected. **Show Suppressed** filter button is selected.
.. image:: ../figures/psa1567524091300.png .. image:: /shared/figures/fault-mgmt/psa1567524091300.png
You can sort the entries by clicking on the column titles. For example, to You can sort the entries by clicking on the column titles. For example, to
sort the view of the entries by severity, click **Severity**; the entries sort the view of the entries by severity, click **Severity**; the entries

2
doc/source/node_management/kubernetes/common_host_tasks/deleting-a-host-using-horizon.rst
View File

@ -22,5 +22,5 @@ hard drive.
#. From the **Edit** menu for the host, select **Delete Host**. #. From the **Edit** menu for the host, select **Delete Host**.
.. figure:: ../figures/mwl1579716430090.png .. figure:: /node_management/kubernetes/figures/mwl1579716430090.png
:scale: 100% :scale: 100%

2
doc/source/node_management/kubernetes/common_host_tasks/force-locking-a-host-using-horizon.rst
View File

@ -30,7 +30,7 @@ configuration and maintenance purposes.
#. From the **Edit** menu for the host, select **Force Lock Host**. #. From the **Edit** menu for the host, select **Force Lock Host**.
.. figure:: ../figures/xwu1579713699282.png .. figure:: /node_management/kubernetes/figures/xwu1579713699282.png
:scale: 100% :scale: 100%
The system displays a warning message appropriate to the The system displays a warning message appropriate to the

2
doc/source/node_management/kubernetes/common_host_tasks/locking-a-host-using-horizon.rst
View File

@ -37,5 +37,5 @@ the host, causing any containers on that host to be evicted.
#. From the **Edit** menu for the host, select **Lock Host**. #. From the **Edit** menu for the host, select **Lock Host**.
.. figure:: ../figures/rst1442611298701.png .. figure:: /shared/figures/system_configuration/rst1442611298701.png
:scale: 100% :scale: 100%

2
doc/source/node_management/kubernetes/common_host_tasks/rebooting-a-host-using-horizon.rst
View File

@ -23,5 +23,5 @@ The host then reboots automatically.
#. From the **Edit** menu for the host, select **Reboot Host**. #. From the **Edit** menu for the host, select **Reboot Host**.
.. figure:: ../figures/mwl1579716430090.png .. figure:: /node_management/kubernetes/figures/mwl1579716430090.png
:scale: 100% :scale: 100%

2
doc/source/node_management/kubernetes/common_host_tasks/reinstalling-a-host-using-horizon.rst
View File

@ -54,5 +54,5 @@ the network interfaces through the BIOS boot option.
#. From the **Edit** menu for the host, select **Reinstall Host**. #. From the **Edit** menu for the host, select **Reinstall Host**.
.. figure:: ../figures/mwl1579716430090.png .. figure:: /node_management/kubernetes/figures/mwl1579716430090.png
:scale: 100% :scale: 100%

2
doc/source/node_management/kubernetes/common_host_tasks/swacting-a-master-controller-using-horizon.rst
View File

@ -26,5 +26,5 @@ when updating hardware or replacing faulty components.
#. From the **Edit** menu for the standby controller, select **Swact Host**. #. From the **Edit** menu for the standby controller, select **Swact Host**.
.. figure:: ../figures/wwd1579715313055.png .. figure:: /node_management/kubernetes/figures/wwd1579715313055.png
:scale: 100% :scale: 100%

2
doc/source/node_management/kubernetes/common_host_tasks/unlocking-a-host-using-horizon.rst
View File

@ -34,5 +34,5 @@ see :ref:`Reboot Limits for Host Unlock <reboot-limits-for-host-unlock>`.
#. From the **Edit** menu for the host, select **Unlock Host**. #. From the **Edit** menu for the host, select **Unlock Host**.
.. figure:: ../figures/mwl1579716430090.png .. figure:: /node_management/kubernetes/figures/mwl1579716430090.png
:scale: 100% :scale: 100%

6
doc/source/node_management/kubernetes/configuring_cpu_core_assignments/configuring-cpu-core-assignments.rst
View File

@ -33,7 +33,7 @@ them more CPU cores from the Horizon Web interface.
The Edit CPU Assignments dialog appears. The Edit CPU Assignments dialog appears.
.. figure:: ../figures/tku1572941730454.png .. figure:: /node_management/kubernetes/figures/tku1572941730454.png
:scale: 100% :scale: 100%
#. Make CPU allocation changes. #. Make CPU allocation changes.
@ -88,7 +88,7 @@ them more CPU cores from the Horizon Web interface.
.. only:: partner .. only:: partner
../../_includes/configure-cpu-core-vswitch.rest /_includes/configure-cpu-core-vswitch.rest
**Shared** **Shared**
Not currently supported. Not currently supported.
@ -96,5 +96,5 @@ them more CPU cores from the Horizon Web interface.
To see how many cores a processor contains, hover over the To see how many cores a processor contains, hover over the
**Information** icon. **Information** icon.
.. figure:: ../figures/jow1436300231676.png .. figure:: /node_management/kubernetes/figures/jow1436300231676.png
:scale: 100% :scale: 100%

2
doc/source/node_management/kubernetes/configuring_node_labels/configuring-node-labels-using-horizon.rst
View File

@ -20,7 +20,7 @@ You can assign and remove labels to modify node functionality using Horizon.
#. Select the Labels tab. #. Select the Labels tab.
.. figure:: ../figures/qes1567103095290.png .. figure:: /node_management/kubernetes/figures/qes1567103095290.png
:scale: 100% :scale: 100%
#. To delete a label, select the **Delete Label** button for the label key #. To delete a label, select the **Delete Label** button for the label key

2
doc/source/node_management/kubernetes/customizing_the_host_life_cycles/configuring-heartbeat-failure-action.rst
View File

@ -101,7 +101,7 @@ Customer logs are created. The customer can change from one action to any
other action at any time and the log reflects the from <action> to <action> other action at any time and the log reflects the from <action> to <action>
change in the log text. For example, change in the log text. For example,
.. figure:: ../figures/wnz1537822287984.jpeg .. figure:: /node_management/kubernetes/figures/wnz1537822287984.jpeg
:scale: 65% :scale: 65%
The heartbeat alarms, such as Management Network can be viewed. For example: The heartbeat alarms, such as Management Network can be viewed. For example:

2
doc/source/node_management/kubernetes/customizing_the_host_life_cycles/configuring-multi-node-failure-avoidance.rst
View File

@ -76,7 +76,7 @@ heartbeat failures.
Customer logs are created. The customer logs record **from** and **to** Customer logs are created. The customer logs record **from** and **to**
changes in the log text. For example: changes in the log text. For example:
.. figure:: ../figures/oio1537823446860.jpeg .. figure:: /node_management/kubernetes/figures/oio1537823446860.jpeg
:scale: 65% :scale: 65%
#. Apply the service parameter change. #. Apply the service parameter change.

Some files were not shown because too many files have changed in this diff Show More