Support for HPE Synergy compute module (dsR8) - draft

Create .rest files and fix link in table.

Signed-off-by: Elisamara Aoki Goncalves <elisamaraaoki.goncalves@windriver.com>
Change-Id: I2ab179aa3716c9e74876ee9e084b7f7b0ceec36c

doc/source/_includes/controller-disk-configurations-for-all-in-one-systems.rest

@@ -0,0 +1,2 @@
+.. note-begin
+.. note-end

doc/source/_includes/hard-drive-options.rest

@@ -0,0 +1,5 @@
+.. hpe-begin
+.. hpe-end
+
+.. hard-drive-begin
+.. hard-drive-end

doc/source/_includes/prepare-servers-for-installation-91baad307173.rest

@@ -66,7 +66,17 @@ host types are:
 
             - Socket 1: Remaining memory
    * - Primary disk
+
+     .. only:: starlingx
+
         -  500 GB SSD or |NVMe| (see :ref:`nvme_config`)
+
+     .. only:: partner
+
+        .. include:: /_includes/prepare-servers-for-installation-91baad307173.rest
+            :start-after: primary-disk-begin
+            :end-before: primary-disk-end
+
    * - Additional disks
      - * 1 or more 500 GB (min. 10K RPM) for Ceph |OSD|
 
@@ -187,7 +197,17 @@ host types are:
    * - Minimum memory
      - 64 GB
    * - Primary disk
+
+     .. only:: starlingx
+
         -  500 GB SSD or |NVMe| (see :ref:`nvme_config`)
+
+     .. only:: partner
+
+        .. include:: /_includes/prepare-servers-for-installation-91baad307173.rest
+            :start-after: primary-disk-begin
+            :end-before: primary-disk-end
+
    * - Additional disks
      - * 1 or more 500 GB (min. 10K RPM) for Ceph |OSD|
 
@@ -255,6 +275,7 @@ configuration.
 Minimum hardware requirements
 -----------------------------
 
+
 The recommended minimum hardware requirements for bare metal servers for various
 host types are:
 
@@ -274,7 +295,17 @@ host types are:
      - 64 GB
      - 32 GB
    * - Primary disk
-     - 500 GB SSD or |NVMe| (see Configure |NVMe| Drive as Primary Disk)
+
+     .. only:: starlingx
+
+        -  500 GB SSD or |NVMe| (see :ref:`nvme_config`)
+
+     .. only:: partner
+
+        .. include:: /_includes/prepare-servers-for-installation-91baad307173.rest
+            :start-after: primary-disk-begin
+            :end-before: primary-disk-end
+
      - 120 GB (Minimum 10k RPM)
    * - Additional disks
      - * 1 or more 500 GB (min. 10K RPM) for Ceph |OSD|
@@ -368,7 +399,16 @@ host types are:
      - 64 GB
      - 32 GB
    * - Primary disk
+     .. only:: starlingx
+
         -  500 GB SSD or |NVMe| (see :ref:`nvme_config`)
+
+     .. only:: partner
+
+        .. include:: /_includes/prepare-servers-for-installation-91baad307173.rest
+            :start-after: primary-disk-begin
+            :end-before: primary-disk-end
+
      - 120 GB (min. 10k RPM)
      - 120 GB (min. 10k RPM)
    * - Additional disks

doc/source/planning/kubernetes/controller-disk-configurations-for-all-in-one-systems.rst

@@ -44,5 +44,11 @@ persistent volume claim or container-ephemeral storage.
     |              | /dev/sdc |           |           |           |                                               |                             |                   | AIO-SX:superscript:`1:` (replication = 2) ; AIO-DX (replication = 2)    |
     +--------------+----------+-----------+-----------+-----------+-----------------------------------------------+-----------------------------+-------------------+-------------------------------------------------------------------------+
 
+.. only:: partner
+
+    .. include:: /_includes/controller-disk-configurations-for-all-in-one-systems.rest
+      :start-after: note-begin
+      :end-before: note-end
+
 
 .. [#fntarg1]  |AIO|-Simplex Ceph replication is disk-based.

doc/source/planning/kubernetes/hard-drive-options.rst

@@ -6,9 +6,17 @@
 Hard Drive Options
 ==================
 
+.. only:: starlingx
+
     For hard drive storage, |prod| supports high-performance |SSD| and |NVMe|
     drives as well as rotational disks.
 
+.. only:: partner
+
+    .. include:: /_includes/hard-drive-options.rest
+      :start-after: hpe-begin
+      :end-before: hpe-end
+
 To increase system performance, you can use a |SSD| or a |NVMe| drive on |prod|
 hosts in place of any rotational drive. |SSD| provides faster read-write access
 than mechanical drives. |NVMe| supports the full performance potential of |SSD|
@@ -26,3 +34,10 @@ adapters is required.
 To use an |NVMe| drive as a root drive, you must enable |UEFI| support in the
 host BIOS. In addition, when installing the host, you must perform extra steps
 to assign the drive as the boot device.
+
+.. only:: partner
+
+    .. include:: /_includes/hard-drive-options.rest
+      :start-after: hard-drive-begin
+      :end-before: hard-drive-end
+