Revert Granite Rapid GNSS and DPLL support for timing
Original review: https://review.opendev.org/c/starlingx/docs/+/961429 Change-Id: Ia23cbb2f036e48b592f1900ff0d30e6f5e2cc2a2 Signed-off-by: Ngairangbam Mili <ngairangbam.mili@windriver.com>
This commit is contained in:
Ngairangbam Mili
@@ -123,9 +123,13 @@ None
|
||||
|
||||
**Other requirements**
|
||||
|
||||
.. The clock type instance is a special instance used for configuring the |NIC|
|
||||
.. control parameters of the Westport Channel, Logan Beach, E825 (GNR-D) and E830
|
||||
.. (Connorsville) |NICs| clock interface parameters.
|
||||
|
||||
The clock type instance is a special instance used for configuring the |NIC|
|
||||
control parameters of the Westport Channel, Logan Beach, E825 (GNR-D) and E830
|
||||
(Connorsville) |NICs| clock interface parameters.
|
||||
control parameters of the Westport Channel or Logan Beach |NIC| clock
|
||||
interface parameters.
|
||||
|
||||
These parameters can be applied to the interface of a clock instance |PTP|
|
||||
parameters:
|
||||
@@ -142,81 +146,81 @@ parameters:
|
||||
|
||||
- synce_rclkb enabled
|
||||
|
||||
- sdp0
|
||||
.. - sdp0
|
||||
|
||||
- output - configure SDP0 pin as output and assign to channel 1
|
||||
.. - output - configure SDP0 pin as output and assign to channel 1
|
||||
|
||||
- sdp1
|
||||
.. - sdp1
|
||||
|
||||
- input - configure SDP1 pin as input and assign to channel 1
|
||||
.. - input - configure SDP1 pin as input and assign to channel 1
|
||||
|
||||
- sdp2
|
||||
.. - sdp2
|
||||
|
||||
- output - configure SDP2 pin as output and assign to channel 2
|
||||
.. - output - configure SDP2 pin as output and assign to channel 2
|
||||
|
||||
- sdp3
|
||||
.. - sdp3
|
||||
|
||||
- input - configure SDP3 pin as input and assign to channel 2
|
||||
.. - input - configure SDP3 pin as input and assign to channel 2
|
||||
|
||||
- period_sdp0
|
||||
.. - period_sdp0
|
||||
|
||||
- 1pps - enable 1PPS output on SDP0 pin
|
||||
.. - 1pps - enable 1PPS output on SDP0 pin
|
||||
|
||||
- 1khz - enable 1 KHz output on SDP0 pin
|
||||
.. - 1khz - enable 1 KHz output on SDP0 pin
|
||||
|
||||
- 10mhz - enable 10 MHz output on SDP0 pin
|
||||
.. - 10mhz - enable 10 MHz output on SDP0 pin
|
||||
|
||||
- period_sdp2
|
||||
.. - period_sdp2
|
||||
|
||||
- 1pps - enable 1PPS output on SDP2 pin
|
||||
.. - 1pps - enable 1PPS output on SDP2 pin
|
||||
|
||||
- 1khz - enable 1 KHz output on SDP2 pin
|
||||
.. - 1khz - enable 1 KHz output on SDP2 pin
|
||||
|
||||
- 10mhz - enable 10 MHz output on SDP2 pin
|
||||
.. - 10mhz - enable 10 MHz output on SDP2 pin
|
||||
|
||||
- tspll_cfg:
|
||||
.. - tspll_cfg:
|
||||
|
||||
- osc_156.25 - use the 156.25 MHz oscillator clock signal as input reference
|
||||
clock for the |PHC|
|
||||
.. - osc_156.25 - use the 156.25 MHz oscillator clock signal as input reference
|
||||
.. clock for the |PHC|
|
||||
|
||||
- timeref_156.25 - use the 156.25 MHz |DPLL| clock signal (TIME_REF) as input
|
||||
reference clock for the |PHC|.
|
||||
.. - timeref_156.25 - use the 156.25 MHz |DPLL| clock signal (TIME_REF) as input
|
||||
.. reference clock for the |PHC|.
|
||||
|
||||
- tx_clk
|
||||
.. - tx_clk
|
||||
|
||||
- enet - use the 25 MHz oscillator clock signal as |TX| reference clock for the
|
||||
|PHY| port
|
||||
.. - enet - use the 25 MHz oscillator clock signal as |TX| reference clock for the
|
||||
.. PHY port
|
||||
|
||||
- synce - use the 156.25 MHz |DPLL| clock signal as |TX| reference clock for the
|
||||
|PHY| port.
|
||||
.. - synce - use the 156.25 MHz |DPLL| clock signal as |TX| reference clock for the
|
||||
.. PHY| port.
|
||||
|
||||
- eref0 - use the 156.25 MHz oscillator clock signal as |TX| reference clock
|
||||
for the |PHY| port
|
||||
.. - eref0 - use the 156.25 MHz oscillator clock signal as |TX| reference clock
|
||||
.. for the |PHY| port
|
||||
|
||||
gnss-monitor
|
||||
============
|
||||
.. gnss-monitor
|
||||
.. ============
|
||||
|
||||
**Default global parameters**
|
||||
.. **Default global parameters**
|
||||
|
||||
* satellite_count 5
|
||||
* signal_quality_db 30
|
||||
* cmdline_opts ''
|
||||
.. * satellite_count 5
|
||||
.. * signal_quality_db 30
|
||||
.. * cmdline_opts ''
|
||||
|
||||
**Default interface parameters**
|
||||
.. **Default interface parameters**
|
||||
|
||||
None
|
||||
.. None
|
||||
|
||||
**Required user-supplied parameters**
|
||||
.. **Required user-supplied parameters**
|
||||
|
||||
``devices <space separated gnss devices to be monitored>``
|
||||
.. ``devices <space separated gnss devices to be monitored>``
|
||||
|
||||
**Other requirements**
|
||||
.. **Other requirements**
|
||||
|
||||
``gnss-monitor`` represents an instance of ``gpsd``. ``cmdline_opts`` and
|
||||
``devices`` are used on the ``gpsd`` service instantiation. Check ``man gpsd`` for
|
||||
detail options. ``-D 7`` is used for setting loglevel.
|
||||
.. ``gnss-monitor`` represents an instance of ``gpsd``. ``cmdline_opts`` and
|
||||
.. ``devices`` are used on the ``gpsd`` service instantiation. Check ``man gpsd`` for
|
||||
.. detail options. ``-D 7`` is used for setting loglevel.
|
||||
|
||||
Only one instance of ``gnss-monitor`` is allowed per host. ``Collectd``
|
||||
communicates with ``gpsd`` to monitor the configured |GNSS| devices and
|
||||
raise/clear alarms based on the configured threshold parameters
|
||||
``satellite_count`` and ``signal_quality_db``.
|
||||
.. Only one instance of ``gnss-monitor`` is allowed per host. ``Collectd``
|
||||
.. communicates with ``gpsd`` to monitor the configured |GNSS| devices and
|
||||
.. raise/clear alarms based on the configured threshold parameters
|
||||
.. ``satellite_count`` and ``signal_quality_db``.
|
||||
|
||||
@@ -9,15 +9,23 @@ Example PTP Instance Configurations
|
||||
:depth: 2
|
||||
|
||||
|
||||
The following sections provide example configuration steps for some |PTP|
|
||||
The following sections provide example configuration steps for two |PTP|
|
||||
configurations supported by |prod|.
|
||||
|
||||
- The first is a Border Clock setup where an external |PTP| |PTS| is providing
|
||||
a time source for the system. Only ptp4l and phc2sys are used for this
|
||||
configuration.
|
||||
|
||||
- The second shows how to setup a |PTS| node when a time source is available
|
||||
via a locally connected GNSS signal. The ``ptp4l``, ``phc2sys``, ``ts2phc``
|
||||
and clock instance types are used for this configuration.
|
||||
|
||||
T-BC - Simple PTP configuration
|
||||
===============================
|
||||
|
||||
This example presents a Border Clock setup where an external |PTP| |PTS|
|
||||
provides a time source for the system. Only ``ptp4l`` and ``phc2sys`` are used
|
||||
for this configuration.
|
||||
.. This example presents a Border Clock setup where an external |PTP| |PTS|
|
||||
.. provides a time source for the system. Only ``ptp4l`` and ``phc2sys`` are used
|
||||
.. for this configuration.
|
||||
|
||||
Using the topology shown, the following examples provide configurations for
|
||||
each service type:
|
||||
@@ -161,9 +169,9 @@ phc2sys
|
||||
T-GM - Alternate PTP Configuration
|
||||
==================================
|
||||
|
||||
This example shows how to setup a |PTS| node when a time source is available
|
||||
via a locally connected |GNSS| signal. The ``ptp4l``, ``phc2sys``, ``ts2phc``
|
||||
and clock instance types are used for this configuration.
|
||||
.. This example shows how to setup a |PTS| node when a time source is available
|
||||
.. via a locally connected |GNSS| signal. The ``ptp4l``, ``phc2sys``, ``ts2phc``
|
||||
.. and clock instance types are used for this configuration.
|
||||
|
||||
Using the topology shown, the following examples provide configurations for
|
||||
each service type.
|
||||
@@ -402,410 +410,410 @@ instance:
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-apply
|
||||
|
||||
T-GM - Dual NIC Deployment with GNSS and Timing Modules
|
||||
=======================================================
|
||||
.. T-GM - Dual NIC Deployment with GNSS and Timing Modules
|
||||
.. =======================================================
|
||||
|
||||
This scenario presents an example of |T-GM| setup where the two |NICs| use |GNSS|
|
||||
as the precise time source. This configuration can be extended to include
|
||||
additional |NICs|.
|
||||
.. This scenario presents an example of |T-GM| setup where the two |NICs| use |GNSS|
|
||||
.. as the precise time source. This configuration can be extended to include
|
||||
.. additional |NICs|.
|
||||
|
||||
.. figure:: figures/t-gm-configuration.PNG
|
||||
:scale: 110 %
|
||||
.. .. figure:: figures/t-gm-configuration.PNG
|
||||
.. :scale: 110 %
|
||||
|
||||
*T-GM Configuration*
|
||||
.. *T-GM Configuration*
|
||||
|
||||
clock
|
||||
-----
|
||||
.. clock
|
||||
.. -----
|
||||
|
||||
#. Create an instance.
|
||||
.. #. Create an instance.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-add clock0 clock
|
||||
.. ~(keystone_admin)]$ system ptp-instance-add clock0 clock
|
||||
|
||||
#. Create an interface to configure NIC1, add parameter(s), and assign the host
|
||||
interface(s) to it. The SDP1 pin is assigned to channel 1 and will receive
|
||||
the signal from |DPLL|. Input reference clock for |PHC| will be a 156.25 MHz
|
||||
signal from |DPLL| (TIME_REF). Use |DPLL| clock signal (SyncE) as |TX|
|
||||
reference clock for |PHY| port.
|
||||
.. #. Create an interface to configure NIC1, add parameter(s), and assign the host
|
||||
.. interface(s) to it. The SDP1 pin is assigned to channel 1 and will receive
|
||||
.. the signal from |DPLL|. Input reference clock for |PHC| will be a 156.25 MHz
|
||||
.. signal from |DPLL| (TIME_REF). Use |DPLL| clock signal (SyncE) as |TX|
|
||||
.. reference clock for |PHY| port.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-interface-add clock0if0 clock0
|
||||
~(keystone_admin)]$ system ptp-interface-parameter-add clock0if0 sdp1=input
|
||||
~(keystone_admin)]$ system ptp-interface-parameter-add clock0if0 tspll_cfg=timeref_156.25
|
||||
~(keystone_admin)]$ system ptp-interface-parameter-add clock0if0 tx_clk=synce
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f0 clk0if0
|
||||
.. ~(keystone_admin)]$ system ptp-interface-add clock0if0 clock0
|
||||
.. ~(keystone_admin)]$ system ptp-interface-parameter-add clock0if0 sdp1=input
|
||||
.. ~(keystone_admin)]$ system ptp-interface-parameter-add clock0if0 tspll_cfg=timeref_156.25
|
||||
.. ~(keystone_admin)]$ system ptp-interface-parameter-add clock0if0 tx_clk=synce
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f0 clk0if0
|
||||
|
||||
#. Create an interface to configure the other ports of NIC1. Use |DPLL| clock
|
||||
signal (SyncE) as |TX| reference clock for |PHY| port.
|
||||
.. #. Create an interface to configure the other ports of NIC1. Use |DPLL| clock
|
||||
.. signal (SyncE) as |TX| reference clock for |PHY| port.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-interface-add clock0if1 clock0
|
||||
~(keystone_admin)]$ system ptp-interface-parameter-add clock0if1 tx_clk=synce
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f1 clock0if1
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f2 clock0if1
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f3 clock0if1
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f4 clock0if1
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f5 clock0if1
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f6 clock0if1
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f7 clock0if1
|
||||
.. ~(keystone_admin)]$ system ptp-interface-add clock0if1 clock0
|
||||
.. ~(keystone_admin)]$ system ptp-interface-parameter-add clock0if1 tx_clk=synce
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f1 clock0if1
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f2 clock0if1
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f3 clock0if1
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f4 clock0if1
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f5 clock0if1
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f6 clock0if1
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f7 clock0if1
|
||||
|
||||
#. Create an interface to configure NIC2, add parameter(s), and assign the host
|
||||
interface(s) to it. SDP1 pin is assigned to channel 1 and will receive the
|
||||
signal from |DPLL|. For additional |NICs|, run the following commands for each |NIC|.
|
||||
.. #. Create an interface to configure NIC2, add parameter(s), and assign the host
|
||||
.. interface(s) to it. SDP1 pin is assigned to channel 1 and will receive the
|
||||
.. signal from |DPLL|. For additional |NICs|, run the following commands for each |NIC|.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-interface-add clock0if2 clock0
|
||||
~(keystone_admin)]$ system ptp-interface-parameter-add clock0if2 sdp1=input
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f0 clock0if2
|
||||
.. ~(keystone_admin)]$ system ptp-interface-add clock0if2 clock0
|
||||
.. ~(keystone_admin)]$ system ptp-interface-parameter-add clock0if2 sdp1=input
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f0 clock0if2
|
||||
|
||||
#. Assign the instance to a host.
|
||||
.. #. Assign the instance to a host.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system host-ptp-instance-assign controller-0 clock0
|
||||
.. ~(keystone_admin)]$ system host-ptp-instance-assign controller-0 clock0
|
||||
|
||||
#. Apply the configuration.
|
||||
.. #. Apply the configuration.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-apply
|
||||
.. ~(keystone_admin)]$ system ptp-instance-apply
|
||||
|
||||
|
||||
ts2phc
|
||||
------
|
||||
.. ts2phc
|
||||
.. ------
|
||||
|
||||
#. Create an instance and add parameter(s). This instance will synchronize the
|
||||
|PHCs| with the external timestamp signal coming from the |GNSS|.
|
||||
.. #. Create an instance and add parameter(s). This instance will synchronize the
|
||||
.. PHCs| with the external timestamp signal coming from the |GNSS|.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-add ts0 ts2phc
|
||||
~(keystone_admin)]$ system ptp-instance-parameter-add ts0 ts2phc.nmea_serialport=/dev/ttyACM0
|
||||
.. ~(keystone_admin)]$ system ptp-instance-add ts0 ts2phc
|
||||
.. ~(keystone_admin)]$ system ptp-instance-parameter-add ts0 ts2phc.nmea_serialport=/dev/ttyACM0
|
||||
|
||||
.. note::
|
||||
.. .. note::
|
||||
|
||||
The |GNSS| serial port and baud rate may vary depending on the platform.
|
||||
.. The |GNSS| serial port and baud rate may vary depending on the platform.
|
||||
|
||||
#. Create an interface, add parameter(s), and assign the host interface(s) to
|
||||
it. The clock signal will be received by the SDP1 pin on channel 1 of each
|
||||
|NIC|.
|
||||
.. #. Create an interface, add parameter(s), and assign the host interface(s) to
|
||||
.. it. The clock signal will be received by the SDP1 pin on channel 1 of each
|
||||
.. NIC|.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-interface-add ts0if0 ts0
|
||||
~(keystone_admin)]$ system ptp-interface-parameter-add ts0if0 ts2phc.channel=1 ts2phc.pin_index=1
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f0 ts0if0
|
||||
.. ~(keystone_admin)]$ system ptp-interface-add ts0if0 ts0
|
||||
.. ~(keystone_admin)]$ system ptp-interface-parameter-add ts0if0 ts2phc.channel=1 ts2phc.pin_index=1
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f0 ts0if0
|
||||
|
||||
#. Assign the host interface(s) of the other |NICs| that will be
|
||||
synchronized by the |GNSS| timestamps.
|
||||
.. #. Assign the host interface(s) of the other |NICs| that will be
|
||||
.. synchronized by the |GNSS| timestamps.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f0 ts0if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f0 ts0if0
|
||||
|
||||
#. Assign the instance to a host.
|
||||
.. #. Assign the instance to a host.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system host-ptp-instance-assign controller-0 ts0
|
||||
.. ~(keystone_admin)]$ system host-ptp-instance-assign controller-0 ts0
|
||||
|
||||
#. Apply the configuration.
|
||||
.. #. Apply the configuration.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-apply
|
||||
.. ~(keystone_admin)]$ system ptp-instance-apply
|
||||
|
||||
|
||||
ptp4l
|
||||
-----
|
||||
.. ptp4l
|
||||
.. -----
|
||||
|
||||
#. Create an instance for NIC1 and add parameter(s). It is recommended to
|
||||
create a ``ptp4l`` instance for each |PHC|.
|
||||
.. #. Create an instance for NIC1 and add parameter(s). It is recommended to
|
||||
.. create a ``ptp4l`` instance for each |PHC|.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-add ptp0 ptp4l
|
||||
~(keystone_admin)]$ system ptp-instance-parameter-add ptp0 domainNumber=24
|
||||
~(keystone_admin)]$ system ptp-instance-parameter-add ptp0 dataset_comparison=G.8275.x
|
||||
.. ~(keystone_admin)]$ system ptp-instance-add ptp0 ptp4l
|
||||
.. ~(keystone_admin)]$ system ptp-instance-parameter-add ptp0 domainNumber=24
|
||||
.. ~(keystone_admin)]$ system ptp-instance-parameter-add ptp0 dataset_comparison=G.8275.x
|
||||
|
||||
#. Create an interface, add parameter(s), and assign host interface(s) to it.
|
||||
.. #. Create an interface, add parameter(s), and assign host interface(s) to it.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-interface-add ptp0if0 ptp0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f0 ptp0if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f1 ptp0if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f2 ptp0if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f3 ptp0if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f4 ptp0if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f5 ptp0if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f6 ptp0if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f7 ptp0if0
|
||||
.. ~(keystone_admin)]$ system ptp-interface-add ptp0if0 ptp0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f0 ptp0if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f1 ptp0if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f2 ptp0if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f3 ptp0if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f4 ptp0if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f5 ptp0if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f6 ptp0if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f7 ptp0if0
|
||||
|
||||
#. Assign the instance to a host.
|
||||
.. #. Assign the instance to a host.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system host-ptp-instance-assign controller-0 ptp0
|
||||
.. ~(keystone_admin)]$ system host-ptp-instance-assign controller-0 ptp0
|
||||
|
||||
#. Repeat the procedure in a similar manner for the additional |NICs|.
|
||||
.. #. Repeat the procedure in a similar manner for the additional |NICs|.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-add ptp1 ptp4l
|
||||
~(keystone_admin)]$ system ptp-instance-parameter-add ptp1 domainNumber=24
|
||||
~(keystone_admin)]$ system ptp-instance-parameter-add ptp1 dataset_comparison=G.8275.x
|
||||
.. ~(keystone_admin)]$ system ptp-instance-add ptp1 ptp4l
|
||||
.. ~(keystone_admin)]$ system ptp-instance-parameter-add ptp1 domainNumber=24
|
||||
.. ~(keystone_admin)]$ system ptp-instance-parameter-add ptp1 dataset_comparison=G.8275.x
|
||||
|
||||
~(keystone_admin)]$ system ptp-interface-add ptp1if0 ptp1
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f0 ptp1if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f1 ptp1if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f2 ptp1if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f3 ptp1if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f4 ptp1if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f5 ptp1if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f6 ptp1if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f7 ptp1if0
|
||||
~(keystone_admin)]$ system host-ptp-instance-assign controller-0 ptp1
|
||||
.. ~(keystone_admin)]$ system ptp-interface-add ptp1if0 ptp1
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f0 ptp1if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f1 ptp1if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f2 ptp1if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f3 ptp1if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f4 ptp1if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f5 ptp1if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f6 ptp1if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f7 ptp1if0
|
||||
.. ~(keystone_admin)]$ system host-ptp-instance-assign controller-0 ptp1
|
||||
|
||||
#. Apply the configuration.
|
||||
.. #. Apply the configuration.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-apply
|
||||
.. ~(keystone_admin)]$ system ptp-instance-apply
|
||||
|
||||
phc2sys
|
||||
-------
|
||||
.. phc2sys
|
||||
.. -------
|
||||
|
||||
#. Create an instance and add parameter(s). This instance will synchronize the
|
||||
system clock with the NIC1 |PHC| via the |PTP| port (-s option).
|
||||
.. #. Create an instance and add parameter(s). This instance will synchronize the
|
||||
.. system clock with the NIC1 |PHC| via the |PTP| port (-s option).
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-add phc0 phc2sys
|
||||
~(keystone_admin)]$ system ptp-instance-parameter-add phc0 domainNumber=24
|
||||
~(keystone_admin)]$ system ptp-instance-parameter-add phc0 uds_address=/var/run/ptp4l-ptp0
|
||||
~(keystone_admin)]$ system ptp-instance-parameter-add phc0 cmdline_opts='-w -s enp1s0f0'
|
||||
.. ~(keystone_admin)]$ system ptp-instance-add phc0 phc2sys
|
||||
.. ~(keystone_admin)]$ system ptp-instance-parameter-add phc0 domainNumber=24
|
||||
.. ~(keystone_admin)]$ system ptp-instance-parameter-add phc0 uds_address=/var/run/ptp4l-ptp0
|
||||
.. ~(keystone_admin)]$ system ptp-instance-parameter-add phc0 cmdline_opts='-w -s enp1s0f0'
|
||||
|
||||
.. note::
|
||||
.. : note:
|
||||
|
||||
For the -s option in the ``cmdline_opts`` parameter, it is necessary to
|
||||
add the |PTP| port of NIC1. To find the |PTP| port, find the interface
|
||||
that contains the ``ptp`` folder:
|
||||
.. For the -s option in the ``cmdline_opts`` parameter, it is necessary to
|
||||
.. add the |PTP| port of NIC1. To find the |PTP| port, find the interface
|
||||
.. that contains the ``ptp`` folder:
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
$ ls /sys/class/net/enp1*/device/ptp
|
||||
/sys/class/net/enp1s0f0/device/ptp:
|
||||
ptp0
|
||||
.. $ ls /sys/class/net/enp1*/device/ptp
|
||||
.. /sys/class/net/enp1s0f0/device/ptp:
|
||||
.. ptp0
|
||||
|
||||
#. Assign the instance to a host.
|
||||
.. #. Assign the instance to a host.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system host-ptp-instance-assign controller-0 phc0
|
||||
.. ~(keystone_admin)]$ system host-ptp-instance-assign controller-0 phc0
|
||||
|
||||
#. Apply the configuration.
|
||||
.. #. Apply the configuration.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-apply
|
||||
.. ~(keystone_admin)]$ system ptp-instance-apply
|
||||
|
||||
T-BC - Dual NIC Deployment with Timing Module
|
||||
=============================================
|
||||
.. T-BC - Dual NIC Deployment with Timing Module
|
||||
.. =============================================
|
||||
|
||||
This scenario presents an example of |T-BC| configuration where NIC1 is
|
||||
synchronized via ``ptp4l`` and then NIC2 is synchronized via a clock signal
|
||||
generated by NIC1.
|
||||
.. This scenario presents an example of |T-BC| configuration where NIC1 is
|
||||
.. synchronized via ``ptp4l`` and then NIC2 is synchronized via a clock signal
|
||||
.. generated by NIC1.
|
||||
|
||||
This configuration can be extended to include additional |NICs|.
|
||||
.. This configuration can be extended to include additional |NICs|.
|
||||
|
||||
.. figure:: figures/t-bc-configuration.PNG
|
||||
:scale: 110 %
|
||||
.. .. figure:: figures/t-bc-configuration.PNG
|
||||
.. :scale: 110 %
|
||||
|
||||
*T-BC configuration*
|
||||
.. *T-BC configuration*
|
||||
|
||||
.. note::
|
||||
.. .. note:
|
||||
|
||||
In a setup where Intel E825 and E830 |NICs| are used, the incoming |PTP| and
|
||||
SyncE clock sources must be connected to the E825 ports only.
|
||||
.. In a setup where Intel E825 and E830 |NICs| are used, the incoming |PTP| and
|
||||
.. SyncE clock sources must be connected to the E825 ports only.
|
||||
|
||||
clock
|
||||
-----
|
||||
.. clock
|
||||
.. -----
|
||||
|
||||
#. Create an instance.
|
||||
.. #. Create an instance.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-add clock0 clock
|
||||
.. ~(keystone_admin)]$ system ptp-instance-add clock0 clock
|
||||
|
||||
#. Create an interface to configure NIC1, add parameter(s), and assign the host
|
||||
interface(s) to it. The SDP0 pin is assigned to channel 1 and will generate
|
||||
a 1 |PPS| signal to |DPLL|. Input reference clock for |PHC| will be a 156.25 MHz
|
||||
signal from |DPLL| (TIME_REF). Use |DPLL| clock signal (SyncE) as |TX| reference
|
||||
clock for |PHY| port.
|
||||
.. #. Create an interface to configure NIC1, add parameter(s), and assign the host
|
||||
.. interface(s) to it. The SDP0 pin is assigned to channel 1 and will generate
|
||||
.. a 1 |PPS| signal to |DPLL|. Input reference clock for |PHC| will be a 156.25 MHz
|
||||
.. signal from |DPLL| (TIME_REF). Use |DPLL| clock signal (SyncE) as |TX| reference
|
||||
.. clock for |PHY| port.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-interface-add clock0if0 clock0
|
||||
~(keystone_admin)]$ system ptp-interface-parameter-add clock0if0 sdp0=output period_sdp0=1pps
|
||||
~(keystone_admin)]$ system ptp-interface-parameter-add clock0if0 tspll_cfg=timeref_156.25
|
||||
~(keystone_admin)]$ system ptp-interface-parameter-add clock0if0 tx_clk=synce
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f0 clk0if0
|
||||
.. ~(keystone_admin)]$ system ptp-interface-add clock0if0 clock0
|
||||
.. ~(keystone_admin)]$ system ptp-interface-parameter-add clock0if0 sdp0=output period_sdp0=1pps
|
||||
.. ~(keystone_admin)]$ system ptp-interface-parameter-add clock0if0 tspll_cfg=timeref_156.25
|
||||
.. ~(keystone_admin)]$ system ptp-interface-parameter-add clock0if0 tx_clk=synce
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f0 clk0if0
|
||||
|
||||
#. Create an interface to configure the other ports of NIC1. Use |DPLL| clock
|
||||
signal (SyncE) as |TX| reference clock for |PHY| port.
|
||||
.. #. Create an interface to configure the other ports of NIC1. Use |DPLL| clock
|
||||
.. signal (SyncE) as |TX| reference clock for |PHY| port.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-interface-add clock0if1 clock0
|
||||
~(keystone_admin)]$ system ptp-interface-parameter-add clock0if1 tx_clk=synce
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f1 clock0if1
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f2 clock0if1
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f3 clock0if1
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f4 clock0if1
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f5 clock0if1
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f6 clock0if1
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f7 clock0if1
|
||||
.. ~(keystone_admin)]$ system ptp-interface-add clock0if1 clock0
|
||||
.. ~(keystone_admin)]$ system ptp-interface-parameter-add clock0if1 tx_clk=synce
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f1 clock0if1
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f2 clock0if1
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f3 clock0if1
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f4 clock0if1
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f5 clock0if1
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f6 clock0if1
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp1s0f7 clock0if1
|
||||
|
||||
#. Create an interface to configure NIC2, add parameter(s), and assign the host
|
||||
interface(s) to it. SDP1 pin is assigned to channel 1 and will receive the
|
||||
signal from |DPLL|. For additional |NICs|, run the following commands for
|
||||
each |NIC|.
|
||||
.. #. Create an interface to configure NIC2, add parameter(s), and assign the host
|
||||
.. interface(s) to it. SDP1 pin is assigned to channel 1 and will receive the
|
||||
.. signal from |DPLL|. For additional |NICs|, run the following commands for
|
||||
.. each |NIC|.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-interface-add clock0if2 clock0
|
||||
~(keystone_admin)]$ system ptp-interface-parameter-add clock0if2 sdp1=input
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f0 clock0if2
|
||||
.. ~(keystone_admin)]$ system ptp-interface-add clock0if2 clock0
|
||||
.. ~(keystone_admin)]$ system ptp-interface-parameter-add clock0if2 sdp1=input
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f0 clock0if2
|
||||
|
||||
#. Assign the instance to a host.
|
||||
.. #. Assign the instance to a host.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system host-ptp-instance-assign controller-0 clock0
|
||||
.. ~(keystone_admin)]$ system host-ptp-instance-assign controller-0 clock0
|
||||
|
||||
#. Apply the configuration.
|
||||
.. #. Apply the configuration.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-apply
|
||||
.. ~(keystone_admin)]$ system ptp-instance-apply
|
||||
|
||||
ts2phc
|
||||
------
|
||||
.. ts2phc
|
||||
.. ------
|
||||
|
||||
#. Create an instance and add parameter(s). This instance will synchronize the
|
||||
|PHCs| with the clock signal generated by NIC1.
|
||||
.. #. Create an instance and add parameter(s). This instance will synchronize the
|
||||
.. PHCs| with the clock signal generated by NIC1.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-add ts0 ts2phc
|
||||
~(keystone_admin)]$ system ptp-instance-parameter-add ts0 cmdline_opts='-s generic'
|
||||
.. ~(keystone_admin)]$ system ptp-instance-add ts0 ts2phc
|
||||
.. ~(keystone_admin)]$ system ptp-instance-parameter-add ts0 cmdline_opts='-s generic'
|
||||
|
||||
#. Create an interface, add parameter(s), and assign the host interface(s) of the
|
||||
|NICs| that will be synchronized by NIC1 clock signal. The clock signal
|
||||
will be received by the SDP1 pin on channel 1 of each |NIC|.
|
||||
.. #. Create an interface, add parameter(s), and assign the host interface(s) of the
|
||||
.. NICs| that will be synchronized by NIC1 clock signal. The clock signal
|
||||
.. will be received by the SDP1 pin on channel 1 of each |NIC|.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-interface-add ts0if0 ts0
|
||||
~(keystone_admin)]$ system ptp-interface-parameter-add ts0if0 ts2phc.channel=1 ts2phc.pin_index=1
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f0 ts0if0
|
||||
.. ~(keystone_admin)]$ system ptp-interface-add ts0if0 ts0
|
||||
.. ~(keystone_admin)]$ system ptp-interface-parameter-add ts0if0 ts2phc.channel=1 ts2phc.pin_index=1
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f0 ts0if0
|
||||
|
||||
#. Assign the instance to a host.
|
||||
.. #. Assign the instance to a host.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system host-ptp-instance-assign controller-0 ts0
|
||||
.. ~(keystone_admin)]$ system host-ptp-instance-assign controller-0 ts0
|
||||
|
||||
#. Apply the configuration.
|
||||
.. #. Apply the configuration.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-apply
|
||||
.. ~(keystone_admin)]$ system ptp-instance-apply
|
||||
|
||||
ptp4l
|
||||
-----
|
||||
.. ptp4l
|
||||
.. -----
|
||||
|
||||
#. Create an instance for NIC1 and add parameter(s). It is recommended to
|
||||
create a ``ptp4l`` instance for each |PHC|.
|
||||
.. #. Create an instance for NIC1 and add parameter(s). It is recommended to
|
||||
.. create a ``ptp4l`` instance for each |PHC|.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-add ptp0 ptp4l
|
||||
~(keystone_admin)]$ system ptp-instance-parameter-add ptp0 domainNumber=24
|
||||
~(keystone_admin)]$ system ptp-instance-parameter-add ptp0 dataset_comparison=G.8275.x
|
||||
.. ~(keystone_admin)]$ system ptp-instance-add ptp0 ptp4l
|
||||
.. ~(keystone_admin)]$ system ptp-instance-parameter-add ptp0 domainNumber=24
|
||||
.. ~(keystone_admin)]$ system ptp-instance-parameter-add ptp0 dataset_comparison=G.8275.x
|
||||
|
||||
#. Create an interface, add parameter(s), and assign the host interface(s) to it.
|
||||
.. #. Create an interface, add parameter(s), and assign the host interface(s) to it.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)$ system ptp-interface-add ptp0if0 ptp0
|
||||
~(keystone_admin)$ system host-if-ptp-assign controller-0 enp1s0f0 ptp0if0
|
||||
~(keystone_admin)$ system host-if-ptp-assign controller-0 enp1s0f1 ptp0if0
|
||||
~(keystone_admin)$ system host-if-ptp-assign controller-0 enp1s0f2 ptp0if0
|
||||
~(keystone_admin)$ system host-if-ptp-assign controller-0 enp1s0f3 ptp0if0
|
||||
~(keystone_admin)$ system host-if-ptp-assign controller-0 enp1s0f4 ptp0if0
|
||||
~(keystone_admin)$ system host-if-ptp-assign controller-0 enp1s0f5 ptp0if0
|
||||
~(keystone_admin)$ system host-if-ptp-assign controller-0 enp1s0f6 ptp0if0
|
||||
~(keystone_admin)$ system host-if-ptp-assign controller-0 enp1s0f7 ptp0if0
|
||||
.. ~(keystone_admin)$ system ptp-interface-add ptp0if0 ptp0
|
||||
.. ~(keystone_admin)$ system host-if-ptp-assign controller-0 enp1s0f0 ptp0if0
|
||||
.. ~(keystone_admin)$ system host-if-ptp-assign controller-0 enp1s0f1 ptp0if0
|
||||
.. ~(keystone_admin)$ system host-if-ptp-assign controller-0 enp1s0f2 ptp0if0
|
||||
.. ~(keystone_admin)$ system host-if-ptp-assign controller-0 enp1s0f3 ptp0if0
|
||||
.. ~(keystone_admin)$ system host-if-ptp-assign controller-0 enp1s0f4 ptp0if0
|
||||
.. ~(keystone_admin)$ system host-if-ptp-assign controller-0 enp1s0f5 ptp0if0
|
||||
.. ~(keystone_admin)$ system host-if-ptp-assign controller-0 enp1s0f6 ptp0if0
|
||||
.. ~(keystone_admin)$ system host-if-ptp-assign controller-0 enp1s0f7 ptp0if0
|
||||
|
||||
|
||||
#. Assign the instance to a host.
|
||||
.. #. Assign the instance to a host.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system host-ptp-instance-assign controller-0 ptp0
|
||||
.. ~(keystone_admin)]$ system host-ptp-instance-assign controller-0 ptp0
|
||||
|
||||
#. Repeat the procedure in a similar manner for the additional |NICs|.
|
||||
.. #. Repeat the procedure in a similar manner for the additional |NICs|.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-add ptp1 ptp4l
|
||||
~(keystone_admin)]$ system ptp-instance-parameter-add ptp1 domainNumber=24
|
||||
~(keystone_admin)]$ system ptp-instance-parameter-add ptp1 dataset_comparison=G.8275.x
|
||||
~(keystone_admin)]$ system ptp-interface-add ptp1if0 ptp1
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f0 ptp1if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f1 ptp1if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f2 ptp1if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f3 ptp1if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f4 ptp1if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f5 ptp1if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f6 ptp1if0
|
||||
~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f7 ptp1if0
|
||||
~(keystone_admin)]$ system host-ptp-instance-assign controller-0 ptp1
|
||||
.. ~(keystone_admin)]$ system ptp-instance-add ptp1 ptp4l
|
||||
.. ~(keystone_admin)]$ system ptp-instance-parameter-add ptp1 domainNumber=24
|
||||
.. ~(keystone_admin)]$ system ptp-instance-parameter-add ptp1 dataset_comparison=G.8275.x
|
||||
.. ~(keystone_admin)]$ system ptp-interface-add ptp1if0 ptp1
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f0 ptp1if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f1 ptp1if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f2 ptp1if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f3 ptp1if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f4 ptp1if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f5 ptp1if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f6 ptp1if0
|
||||
.. ~(keystone_admin)]$ system host-if-ptp-assign controller-0 enp2s0f7 ptp1if0
|
||||
.. ~(keystone_admin)]$ system host-ptp-instance-assign controller-0 ptp1
|
||||
|
||||
|
||||
#. Apply the configuration.
|
||||
.. #. Apply the configuration.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-apply
|
||||
.. ~(keystone_admin)]$ system ptp-instance-apply
|
||||
|
||||
phc2sys
|
||||
-------
|
||||
.. phc2sys
|
||||
.. -------
|
||||
|
||||
#. Create an instance and add parameter(s). This instance will synchronize the
|
||||
system clock with the NIC1 |PHC| via the |PTP| port (-s option).
|
||||
.. #. Create an instance and add parameter(s). This instance will synchronize the
|
||||
.. system clock with the NIC1 |PHC| via the |PTP| port (-s option).
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-add phc0 phc2sys
|
||||
~(keystone_admin)]$ system ptp-instance-parameter-add phc0 domainNumber=24
|
||||
~(keystone_admin)]$ system ptp-instance-parameter-add phc0 uds_address=/var/run/ptp4l-ptp0
|
||||
~(keystone_admin)]$ system ptp-instance-parameter-add phc0 cmdline_opts='-w -s enp1s0f0'
|
||||
.. ~(keystone_admin)]$ system ptp-instance-add phc0 phc2sys
|
||||
.. ~(keystone_admin)]$ system ptp-instance-parameter-add phc0 domainNumber=24
|
||||
.. ~(keystone_admin)]$ system ptp-instance-parameter-add phc0 uds_address=/var/run/ptp4l-ptp0
|
||||
.. ~(keystone_admin)]$ system ptp-instance-parameter-add phc0 cmdline_opts='-w -s enp1s0f0'
|
||||
|
||||
#. Assign the instance to a host.
|
||||
.. #. Assign the instance to a host.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system host-ptp-instance-assign controller-0 phc0
|
||||
.. ~(keystone_admin)]$ system host-ptp-instance-assign controller-0 phc0
|
||||
|
||||
#. Apply the configuration.
|
||||
.. #. Apply the configuration.
|
||||
|
||||
.. code-block:: none
|
||||
.. .. code-block:: none
|
||||
|
||||
~(keystone_admin)]$ system ptp-instance-apply
|
||||
.. ~(keystone_admin)]$ system ptp-instance-apply
|
||||
|
||||
Reference in New Issue
Block a user