Support flattened install
File location changes to support DS flattend Install TOC Add minitocs and remove duplicate include directive Convert images to figures and add captions Incorporate server prep. steps Add links to post-install steps. Inline overview and HW topics in procs. Patchset 1 review updates. Rework to reuse some StX install content in partner context and some partner install content in StX context. Conditionalize ipv6_note Share aio_duplex_extend Conditionalize Openstack prod name Add HW requirement includes for worker and storage nodes. Link worker and stor reqs to DX, StD and Dedicated install topics. Fix comment notation Correct for duplicate strings in output Updates and additions based on GW review Make ansible_install_time_only note available DS. Move link target from r6 > r7 Temporarily restore alarms to satisfy build Migrate DX flattening to new layout Additional HW requirements to DX, Std and Dedicated tables. Migrate Standard flattening to new layout Roll this-ver forward to r7 Migrate Dedicated Storage flattening to new layout Address review comments. Standardize HW requirement tables Support horizontally conditionalized inline content Address additional review comments Signed-off-by: Ron Stone <ronald.stone@windriver.com> Change-Id: I14c8a1e51f6b6ceff69be063a654b4aadb7d3b8c
This commit is contained in:
Ron Stone
parent
3774dbf685
commit
bc8e3704db
0
doc/source/_includes/install-patch-ctl-0.rest
Normal file
0
doc/source/_includes/install-patch-ctl-0.rest
Normal file
3
doc/source/_includes/installation-prereqs.rest
Normal file
3
doc/source/_includes/installation-prereqs.rest
Normal file
@ -0,0 +1,3 @@
|
||||
.. begin-vdr-additional-prereqs
|
||||
.. end-vdr-additional-prereqs
|
||||
|
||||
@ -0,0 +1,3 @@
|
||||
.. begin-install-ctl-0
|
||||
.. end-install-ctl-0
|
||||
|
||||
3
doc/source/_includes/ipv6_note_bullet.rest
Normal file
3
doc/source/_includes/ipv6_note_bullet.rest
Normal file
@ -0,0 +1,3 @@
|
||||
* Refer to :ref:`stx_ipv6_deployment` for details on how to deploy a
|
||||
NAT64/DNS64 gateway to use StarlingX with IPv6.
|
||||
|
||||
@ -1,7 +1,3 @@
|
||||
====================================
|
||||
Bare metal Standard with Ironic R7.0
|
||||
====================================
|
||||
|
||||
--------
|
||||
Overview
|
||||
--------
|
||||
@ -56,17 +52,12 @@ Installation
|
||||
StarlingX currently supports only a bare metal installation of Ironic with a
|
||||
standard configuration, either:
|
||||
|
||||
* :doc:`controller_storage`
|
||||
* :doc:`controller_storage_install_kubernetes`
|
||||
|
||||
* :doc:`dedicated_storage`
|
||||
* :doc:`dedicated_storage_install_kubernetes`
|
||||
|
||||
|
||||
This guide assumes that you have a standard deployment installed and configured
|
||||
with 2x controllers and at least 1x compute-labeled worker node, with the
|
||||
StarlingX OpenStack application (|prefix|-openstack) applied.
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
ironic_hardware
|
||||
ironic_install
|
||||
@ -1,6 +1,6 @@
|
||||
=====================
|
||||
---------------------
|
||||
Hardware Requirements
|
||||
=====================
|
||||
---------------------
|
||||
|
||||
This section describes the hardware requirements and server preparation for a
|
||||
**StarlingX R7.0 bare metal Ironic** deployment configuration.
|
||||
@ -9,9 +9,9 @@ This section describes the hardware requirements and server preparation for a
|
||||
:local:
|
||||
:depth: 1
|
||||
|
||||
-----------------------------
|
||||
*****************************
|
||||
Minimum hardware requirements
|
||||
-----------------------------
|
||||
*****************************
|
||||
|
||||
* One or more bare metal hosts as Ironic nodes as well as tenant instance node.
|
||||
|
||||
@ -34,9 +34,9 @@ For worker nodes:
|
||||
* Additional switch ports / configuration for new ports on controller, worker,
|
||||
and Ironic nodes, for connectivity to the Ironic provisioning network.
|
||||
|
||||
-----------------------------------
|
||||
***********************************
|
||||
BMC configuration of Ironic node(s)
|
||||
-----------------------------------
|
||||
***********************************
|
||||
|
||||
Enable BMC and allocate a static IP, username, and password in the BIOS settings.
|
||||
For example, set:
|
||||
@ -0,0 +1,466 @@
|
||||
|
||||
=====================
|
||||
Hardware Requirements
|
||||
=====================
|
||||
|
||||
.. begin-min-hw-reqs-common-intro
|
||||
|
||||
-----------------------------
|
||||
Minimum hardware requirements
|
||||
-----------------------------
|
||||
|
||||
This section describes the hardware requirements and server preparation for a
|
||||
**StarlingX R7.0 bare metal All-in-one Simplex** deployment configuration.
|
||||
|
||||
.. contents::
|
||||
:local:
|
||||
:depth: 1
|
||||
|
||||
The recommended minimum hardware requirements for bare metal servers for various
|
||||
host types are:
|
||||
|
||||
.. end-min-hw-reqs-common-intro
|
||||
|
||||
..
|
||||
.. Simplex
|
||||
..
|
||||
|
||||
.. begin-prepare-servers
|
||||
.. begin-min-hw-reqs-sx
|
||||
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
|
||||
* - Minimum Requirements
|
||||
- All-in-one Controller Node
|
||||
* - Number of servers
|
||||
- 1
|
||||
* - Minimum processor class
|
||||
- Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) 8 cores/socket
|
||||
|
||||
or
|
||||
|
||||
Single-CPU Intel® Xeon® D-15xx family, 8 cores (low-power/low-cost option)
|
||||
|
||||
.. only:: starlingx
|
||||
|
||||
Platform: 2x physical cores (4x logical cores if hyper-threading), (by
|
||||
default, configurable)
|
||||
|
||||
Application: Remaining cores
|
||||
|
||||
* - Minimum memory
|
||||
- 64 GB
|
||||
|
||||
.. only:: starlingx
|
||||
|
||||
* Platform:
|
||||
|
||||
- Socket 0: 7GB (by default, configurable)
|
||||
|
||||
- Socket 1: 1GB (by default, configurable)
|
||||
|
||||
* Application:
|
||||
|
||||
- Socket 0: Remaining memory
|
||||
|
||||
- Socket 1: Remaining memory
|
||||
* - Primary disk
|
||||
- 500 GB SSD or |NVMe| (see :ref:`nvme_config`)
|
||||
* - Additional disks
|
||||
- * 1 or more 500 GB (min. 10K RPM) for Ceph |OSD|
|
||||
|
||||
* Recommended, but not required: 1 or more |SSDs| or |NVMe| drives for
|
||||
Ceph journals (min. 1024 MiB per |OSD| journal)
|
||||
|
||||
.. only:: starlingx
|
||||
|
||||
* Recommended, but not required: 1 or more 500G HDs (min. 10K RPM),
|
||||
SSDs or | drives for Container ephemeral disk storage
|
||||
|
||||
.. only:: openstack
|
||||
|
||||
* For OpenStack, recommend 1 or more 500 GB (min. 10K RPM) for |VM|
|
||||
local ephemeral storage
|
||||
|
||||
|
||||
* - Minimum network ports
|
||||
|
||||
.. only:: starlingx
|
||||
|
||||
* MGMT: 1x1GE ( Recommended: MGMT 2x10GE LAG ). Only required if
|
||||
Subcloud in |prod-dc|.
|
||||
|
||||
- * |OAM|: 1x1GE |oam-hw-recommended|
|
||||
|
||||
* Data: 1 or more x 10GE |data-hw-recommended|
|
||||
|
||||
.. only:: starlingx
|
||||
|
||||
* - USB Interface
|
||||
- 1 (Only required if used for initial installation of controller-0)
|
||||
|
||||
* - Boot Order
|
||||
- HD, PXE, USB
|
||||
|
||||
* - BIOS mode
|
||||
|
||||
- BIOS or |UEFI|
|
||||
|
||||
.. note::
|
||||
|
||||
|UEFI Secure Boot and |UEFI| |PXE| boot over IPv6 are not
|
||||
supported. On systems with an IPv6 management network, you can use
|
||||
a separate IPv4 network for PXE boot. For more information, see
|
||||
:ref:`the-pxe-boot-network>`.
|
||||
|
||||
* - Bios settings
|
||||
- * Hyper-Threading technology enabled
|
||||
|
||||
* Virtualization technology enabled
|
||||
|
||||
* VT for directed I/O enabled
|
||||
|
||||
* CPU power and performance policy set to performance
|
||||
|
||||
* |min-proc-idle-power| CPU C state control disabled
|
||||
|
||||
* Plug & play |BMC| detection disabled
|
||||
|
||||
.. end-min-hw-reqs-sx
|
||||
|
||||
--------------------------
|
||||
Prepare bare metal servers
|
||||
--------------------------
|
||||
|
||||
.. include:: prep_servers.txt
|
||||
|
||||
* Cabled for networking
|
||||
|
||||
* Far-end switch ports should be properly configured to realize the networking
|
||||
shown in the following diagram.
|
||||
|
||||
.. figure:: /deploy_install_guides/r7_release/figures/starlingx-deployment-options-simplex.png
|
||||
:scale: 50%
|
||||
:alt: All-in-one Simplex deployment configuration
|
||||
|
||||
*All-in-one Simplex deployment configuration*
|
||||
|
||||
.. end-prepare-servers
|
||||
|
||||
|
||||
..
|
||||
.. Duplex
|
||||
..
|
||||
|
||||
.. begin-prepare-servers-dx
|
||||
.. begin-min-hw-reqs-dx
|
||||
|
||||
|
||||
This section describes the hardware requirements and server preparation for a
|
||||
**StarlingX R7.0 bare metal All-in-one Duplex** deployment configuration.
|
||||
|
||||
.. contents::
|
||||
:local:
|
||||
:depth: 1
|
||||
|
||||
-----------------------------
|
||||
Minimum hardware requirements
|
||||
-----------------------------
|
||||
|
||||
The recommended minimum hardware requirements for bare metal servers for various
|
||||
host types are:
|
||||
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
|
||||
* - Minimum Requirements
|
||||
- All-in-one Controller Node
|
||||
* - Number of servers
|
||||
- 2
|
||||
* - Minimum processor class
|
||||
- * Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) 8 cores/socket
|
||||
|
||||
or
|
||||
|
||||
* Single-CPU Intel® Xeon® D-15xx family, 8 cores (low-power/low-cost option)
|
||||
* - Minimum memory
|
||||
- 64 GB
|
||||
* - Primary disk
|
||||
- 500 GB SSD or |NVMe| (see :ref:`nvme_config`)
|
||||
* - Additional disks
|
||||
- * 1 or more 500 GB (min. 10K RPM) for Ceph |OSD|
|
||||
|
||||
* Recommended, but not required: 1 or more |SSDs| or |NVMe| drives for
|
||||
Ceph journals (min. 1024 MiB per |OSD| journal)
|
||||
|
||||
* For OpenStack, recommend 1 or more 500 GB (min. 10K RPM) for |VM| local
|
||||
ephemeral storage
|
||||
* - Minimum network ports
|
||||
- * Mgmt/Cluster: 1x10GE
|
||||
|
||||
* |OAM|: 1x1GE
|
||||
|
||||
* Data: 1 or more x 10GE
|
||||
* - Bios settings
|
||||
- * Hyper-Threading technology enabled
|
||||
|
||||
* Virtualization technology enabled
|
||||
|
||||
* VT for directed I/O enabled
|
||||
|
||||
* CPU power and performance policy set to performance
|
||||
|
||||
* CPU C state control disabled
|
||||
|
||||
* Plug & play |BMC| detection disabled
|
||||
|
||||
.. end-min-hw-reqs-dx
|
||||
|
||||
--------------------------
|
||||
Prepare bare metal servers
|
||||
--------------------------
|
||||
|
||||
.. include:: prep_servers.txt
|
||||
|
||||
* Cabled for networking
|
||||
|
||||
* Far-end switch ports should be properly configured to realize the networking
|
||||
shown in the diagram above.
|
||||
|
||||
|
||||
.. end-prepare-servers-dx
|
||||
|
||||
..
|
||||
.. Standard with storage
|
||||
..
|
||||
|
||||
.. begin-prepare-servers-std
|
||||
.. begin-min-hw-reqs-std
|
||||
|
||||
|
||||
=====================
|
||||
Hardware Requirements
|
||||
=====================
|
||||
|
||||
This section describes the hardware requirements and server preparation for a
|
||||
**StarlingX R7.0 bare metal Standard with Controller Storage** deployment
|
||||
configuration.
|
||||
|
||||
.. contents::
|
||||
:local:
|
||||
:depth: 1
|
||||
|
||||
-----------------------------
|
||||
Minimum hardware requirements
|
||||
-----------------------------
|
||||
|
||||
The recommended minimum hardware requirements for bare metal servers for various
|
||||
host types are:
|
||||
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
|
||||
* - Minimum Requirements
|
||||
- Controller Node
|
||||
- Worker Node
|
||||
* - Number of servers
|
||||
- 2
|
||||
- 2-10
|
||||
* - Minimum processor class
|
||||
- Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) 8 cores/socket
|
||||
- (Same as controller node)
|
||||
* - Minimum memory
|
||||
- 64 GB
|
||||
- 32 GB
|
||||
* - Primary disk
|
||||
- 500 GB SSD or |NVMe| (see Configure |NVMe| Drive as Primary Disk)
|
||||
- 120 GB (Minimum 10k RPM)
|
||||
* - Additional disks
|
||||
- * 1 or more 500 GB (min. 10K RPM) for Ceph |OSD|
|
||||
|
||||
* Recommended, but not required: 1 or more |SSDs| or |NVMe| drives for
|
||||
Ceph journals (min. 1024 MiB per |OSD| journal)
|
||||
- For OpenStack, recommend 1 or more 500 GB (min. 10K RPM) for |VM| local
|
||||
ephemeral storage
|
||||
* - Minimum network ports
|
||||
- * Mgmt/Cluster: 1x10GE
|
||||
|
||||
* |OAM|: 1x1GE
|
||||
- * Mgmt/Cluster: 1x10GE
|
||||
|
||||
* Data: 1 or more x 10GE
|
||||
* - Bios settings
|
||||
- * Hyper-Threading technology enabled
|
||||
|
||||
* Virtualization technology enabled
|
||||
|
||||
* VT for directed I/O enabled
|
||||
|
||||
* CPU power and performance policy set to performance
|
||||
|
||||
* CPU C state control disabled
|
||||
|
||||
* Plug & play |BMC| detection disabled
|
||||
|
||||
- (Same as controller node)
|
||||
|
||||
.. end-min-hw-reqs-std
|
||||
|
||||
--------------------------
|
||||
Prepare bare metal servers
|
||||
--------------------------
|
||||
|
||||
.. include:: prep_servers.txt
|
||||
|
||||
* Cabled for networking
|
||||
|
||||
* Far-end switch ports should be properly configured to realize the networking
|
||||
shown in the diagram above.
|
||||
|
||||
|
||||
.. end-prepare-servers-std
|
||||
|
||||
|
||||
..
|
||||
.. Dedicated storage
|
||||
..
|
||||
|
||||
.. begin-prepare-servers-ded
|
||||
.. begin-min-hw-reqs-ded
|
||||
|
||||
=====================
|
||||
Hardware Requirements
|
||||
=====================
|
||||
|
||||
This section describes the hardware requirements and server preparation for a
|
||||
**StarlingX R7.0 bare metal Standard with Dedicated Storage** deployment
|
||||
configuration.
|
||||
|
||||
.. contents::
|
||||
:local:
|
||||
:depth: 1
|
||||
|
||||
-----------------------------
|
||||
Minimum hardware requirements
|
||||
-----------------------------
|
||||
|
||||
The recommended minimum hardware requirements for bare metal servers for various
|
||||
host types are:
|
||||
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
|
||||
* - Minimum Requirements
|
||||
- Controller Node
|
||||
- Storage Node
|
||||
- Worker Node
|
||||
* - Number of servers
|
||||
- 2
|
||||
- 2-9
|
||||
- 2-100
|
||||
* - Minimum processor class
|
||||
- Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) 8 cores/socket
|
||||
- (Same as controller node)
|
||||
- (Same as controller node)
|
||||
* - Minimum memory
|
||||
- 64 GB
|
||||
- 64 GB
|
||||
- 32 GB
|
||||
* - Primary disk
|
||||
- 500 GB SSD or |NVMe| (see :ref:`nvme_config`)
|
||||
- 120 GB (min. 10k RPM)
|
||||
- 120 GB (min. 10k RPM)
|
||||
* - Additional disks
|
||||
- None
|
||||
- * 1 or more 500 GB (min. 10K RPM) for Ceph |OSD|
|
||||
|
||||
* Recommended, but not required: 1 or more |SSDs| or |NVMe| drives for
|
||||
Ceph journals (min. 1024 MiB per |OSD| journal)
|
||||
- For OpenStack, recommend 1 or more 500 GB (min. 10K RPM) for |VM| ephemeral
|
||||
storage
|
||||
* - Minimum network ports
|
||||
- * Mgmt/Cluster: 1x10GE
|
||||
|
||||
* |OAM|: 1x1GE
|
||||
- Mgmt/Cluster: 1x10GE
|
||||
- * Mgmt/Cluster: 1x10GE
|
||||
|
||||
* Data: 1 or more x 10GE
|
||||
* - Bios settings
|
||||
- * Hyper-Threading technology enabled
|
||||
|
||||
* Virtualization technology enabled
|
||||
|
||||
* VT for directed I/O enabled
|
||||
|
||||
* CPU power and performance policy set to performance
|
||||
|
||||
* CPU C state control disabled
|
||||
|
||||
* Plug & play |BMC| detection disabled
|
||||
- (Same as controller node)
|
||||
- (Same as controller node)
|
||||
|
||||
.. end-min-hw-reqs-ded
|
||||
|
||||
--------------------------
|
||||
Prepare bare metal servers
|
||||
--------------------------
|
||||
|
||||
.. include:: prep_servers.txt
|
||||
|
||||
* Cabled for networking
|
||||
|
||||
* Far-end switch ports should be properly configured to realize the networking
|
||||
shown in the diagram above.
|
||||
|
||||
|
||||
.. end-prepare-servers-ded
|
||||
|
||||
.. start-prepare-servers-common
|
||||
|
||||
Preparing servers is the first step of the |prod| installation procedure.
|
||||
|
||||
.. rubric:: |proc|
|
||||
|
||||
- Prior to starting the |prod| installation, ensure that the bare metal
|
||||
servers are in the following state:
|
||||
|
||||
- Physically installed.
|
||||
|
||||
- Cabled for power.
|
||||
|
||||
- Cabled for networking.
|
||||
|
||||
Far-end switch ports should be properly configured to realize the
|
||||
networking shown in :ref:`deployment-options` for the particular
|
||||
deployment configuration you are installing.
|
||||
|
||||
- All disks are wiped.
|
||||
|
||||
This ensures that servers will boot from either the network or USB
|
||||
storage, if present.
|
||||
|
||||
.. note::
|
||||
|
||||
The disks and disk partitions need to be wiped before the install.
|
||||
Installing a Debian ISO may fail with a message that the system is
|
||||
in emergency mode if the disks and disk partitions are not
|
||||
completely wiped before the install, especially if the server was
|
||||
previously running a CentOS ISO.
|
||||
|
||||
.. only:: partner
|
||||
|
||||
.. include:: /_includes/debian-rn-link-a90a7e432679.rest
|
||||
|
||||
- BIOS configured with Intel Virtualization (VTD, VTX)
|
||||
|
||||
- Disabled for controller-only servers and storage servers.
|
||||
|
||||
- Enabled for controller+worker servers and worker servers.
|
||||
|
||||
- The servers are powered off.
|
||||
|
||||
|
||||
.. end-prepare-servers-common
|
||||
9
doc/source/_includes/rook_storage.rest
Normal file
9
doc/source/_includes/rook_storage.rest
Normal file
@ -0,0 +1,9 @@
|
||||
--------
|
||||
Overview
|
||||
--------
|
||||
|
||||
.. include:: /shared/_includes/desc_rook_storage.txt
|
||||
|
||||
.. include:: /shared/_includes/ipv6_note.txt
|
||||
|
||||
|
||||
@ -1,6 +1,6 @@
|
||||
=====================
|
||||
Hardware Requirements
|
||||
=====================
|
||||
---------------------
|
||||
Hardware requirements
|
||||
---------------------
|
||||
|
||||
This section describes the hardware requirements and server preparation for a
|
||||
**StarlingX R7.0 bare metal Standard with Rook Storage** deployment
|
||||
@ -64,10 +64,4 @@ Prepare bare metal servers
|
||||
* Cabled for networking
|
||||
|
||||
* Far-end switch ports should be properly configured to realize the networking
|
||||
shown in the following diagram.
|
||||
|
||||
.. figure:: /deploy_install_guides/r7_release/figures/starlingx-deployment-options-controller-storage.png
|
||||
:scale: 50%
|
||||
:alt: Standard with Rook Storage deployment configuration
|
||||
|
||||
*Standard with Rook Storage deployment configuration*
|
||||
shown in the diagram above.
|
||||
@ -1,3 +1,3 @@
|
||||
.. |this-prod| replace:: |prod-long|
|
||||
|
||||
.. |this-ver| replace:: r6.0
|
||||
.. |this-ver| replace:: r7.0
|
||||
|
||||
@ -66,7 +66,7 @@
|
||||
|
||||
.. StarlingX (|prod|)
|
||||
|
||||
.. |prod-ver| replace:: 6.0
|
||||
.. |prod-ver| replace:: |this-ver|
|
||||
|
||||
.. Version at which we cut over to Deb.
|
||||
.. |deb-release-ver| replace:: release 8.0
|
||||
@ -97,6 +97,14 @@
|
||||
|
||||
.. |only-target| replace:: StarlingX
|
||||
|
||||
.. |bare-metal| replace:: bare metal
|
||||
|
||||
.. |reg-string| replace:: public open source registries
|
||||
|
||||
..
|
||||
.. Custom refs
|
||||
..
|
||||
|
||||
|
||||
.. Used in installing-a-subcloud-without-redfish-platform-management-service.rst
|
||||
because target lable differs here/partner contexts.
|
||||
|
||||
@ -10,7 +10,7 @@ Standard Configuration with Controller Storage
|
||||
back-end for Kubernetes |PVCs| deployed on the
|
||||
controller nodes instead of using dedicated storage nodes.
|
||||
|
||||
.. image:: /deploy_install_guides/r6_release/figures/starlingx-deployment-options-controller-storage.png
|
||||
.. image:: /shared/figures/deploy_install_guides/starlingx-deployment-options-controller-storage.png
|
||||
:width: 800
|
||||
|
||||
See :ref:`Common Components <common-components>` for a description of common
|
||||
|
||||
@ -14,7 +14,7 @@ redundant pair of hosts.
|
||||
:local:
|
||||
:depth: 1
|
||||
|
||||
.. image:: /deploy_install_guides/r6_release/figures/starlingx-deployment-options-duplex.png
|
||||
.. image:: /shared/figures/deploy_install_guides/starlingx-deployment-options-duplex.png
|
||||
:width: 800
|
||||
|
||||
See :ref:`Common Components <common-components>` for a description of common
|
||||
|
||||
@ -10,7 +10,7 @@ The AIO Simplex deployment configuration provides a scaled-down |prod| that
|
||||
combines controller, storage, and worker functionality on a single
|
||||
non-redundant host.
|
||||
|
||||
.. image:: /deploy_install_guides/r6_release/figures/starlingx-deployment-options-simplex.png
|
||||
.. image:: /shared/figures/deploy_install_guides/starlingx-deployment-options-simplex.png
|
||||
:width: 800
|
||||
|
||||
.. note::
|
||||
|
||||
@ -9,7 +9,7 @@ Standard Configuration with Dedicated Storage
|
||||
Deployment of |prod| with dedicated storage nodes provides the highest capacity
|
||||
\(single region\), performance, and scalability.
|
||||
|
||||
.. image:: /deploy_install_guides/r6_release/figures/starlingx-deployment-options-dedicated-storage.png
|
||||
.. image:: /shared/figures/deploy_install_guides/starlingx-deployment-options-dedicated-storage.png
|
||||
:width: 800
|
||||
|
||||
See :ref:`Common Components <common-components>` for a description of common
|
||||
|
||||
@ -91,7 +91,7 @@ Bootstrap system on controller-0
|
||||
|
||||
.. only:: starlingx
|
||||
|
||||
.. include:: /_includes/ansible_install_time_only.txt
|
||||
.. include:: /shared/_includes/ansible_install_time_only.txt
|
||||
|
||||
Specify the user configuration override file for the Ansible bootstrap
|
||||
playbook using one of the following methods:
|
||||
|
||||
@ -91,7 +91,7 @@ Bootstrap system on controller-0
|
||||
|
||||
.. only:: starlingx
|
||||
|
||||
.. include:: /_includes/ansible_install_time_only.txt
|
||||
.. include:: /shared/_includes/ansible_install_time_only.txt
|
||||
|
||||
Specify the user configuration override file for the Ansible bootstrap
|
||||
playbook using one of the following methods:
|
||||
|
||||
@ -90,7 +90,7 @@ Bootstrap system on controller-0
|
||||
|
||||
.. only:: starlingx
|
||||
|
||||
.. include:: /_includes/ansible_install_time_only.txt
|
||||
.. include:: /shared/_includes/ansible_install_time_only.txt
|
||||
|
||||
Specify the user configuration override file for the Ansible bootstrap
|
||||
playbook using one of the following methods:
|
||||
|
||||
@ -98,7 +98,7 @@ Bootstrap system on controller-0
|
||||
The default location where Ansible looks for and imports user
|
||||
configuration override files for hosts. For example: ``$HOME/<hostname>.yml``.
|
||||
|
||||
.. include:: /_includes/ansible_install_time_only.txt
|
||||
.. include:: /shared/_includes/ansible_install_time_only.txt
|
||||
|
||||
Specify the user configuration override file for the Ansible bootstrap
|
||||
playbook using one of the following methods:
|
||||
|
||||
@ -84,7 +84,7 @@ On virtual controller-0:
|
||||
The default location where Ansible looks for and imports user
|
||||
configuration override files for hosts. For example: ``$HOME/<hostname>.yml``.
|
||||
|
||||
.. include:: /_includes/ansible_install_time_only.txt
|
||||
.. include:: /shared/_includes/ansible_install_time_only.txt
|
||||
|
||||
Specify the user configuration override file for the Ansible bootstrap
|
||||
playbook using one of the following methods:
|
||||
|
||||
@ -85,7 +85,7 @@ On virtual controller-0:
|
||||
The default location where Ansible looks for and imports user
|
||||
configuration override files for hosts. For example: ``$HOME/<hostname>.yml``.
|
||||
|
||||
.. include:: /_includes/ansible_install_time_only.txt
|
||||
.. include:: /shared/_includes/ansible_install_time_only.txt
|
||||
|
||||
Specify the user configuration override file for the Ansible bootstrap
|
||||
playbook using one of the following methods:
|
||||
|
||||
@ -89,7 +89,7 @@ On virtual controller-0:
|
||||
The default location where Ansible looks for and imports user
|
||||
configuration override files for hosts. For example: ``$HOME/<hostname>.yml``.
|
||||
|
||||
.. include:: /_includes/ansible_install_time_only.txt
|
||||
.. include:: /shared/_includes/ansible_install_time_only.txt
|
||||
|
||||
Specify the user configuration override file for the Ansible bootstrap
|
||||
playbook using one of the following methods:
|
||||
|
||||
@ -5,34 +5,160 @@
|
||||
Install Kubernetes Platform on All-in-one Duplex
|
||||
================================================
|
||||
|
||||
|
||||
.. only:: partner
|
||||
|
||||
.. include:: /_includes/install-kubernetes-null-labels.rest
|
||||
|
||||
.. only:: starlingx
|
||||
.. contents:: |minitoc|
|
||||
:local:
|
||||
:depth: 1
|
||||
|
||||
This section describes the steps to install the StarlingX Kubernetes
|
||||
platform on a **StarlingX R7.0 All-in-one Duplex** deployment
|
||||
configuration.
|
||||
--------
|
||||
Overview
|
||||
--------
|
||||
|
||||
.. contents::
|
||||
:local:
|
||||
:depth: 1
|
||||
.. _aiodx-installation-prereqs:
|
||||
|
||||
---------------------
|
||||
Create a bootable USB
|
||||
---------------------
|
||||
.. include:: /shared/_includes/desc_aio_duplex.txt
|
||||
|
||||
Refer to :ref:`Bootable USB <bootable_usb>` for instructions on how
|
||||
to create a bootable USB with the StarlingX ISO on your system.
|
||||
.. _installation-prereqs-dx:
|
||||
|
||||
--------------------------------
|
||||
Install software on controller-0
|
||||
--------------------------------
|
||||
-----------------------------
|
||||
Minimum hardware requirements
|
||||
-----------------------------
|
||||
|
||||
.. include:: /shared/_includes/inc-install-software-on-controller.rest
|
||||
:start-after: incl-install-software-controller-0-aio-start
|
||||
:end-before: incl-install-software-controller-0-aio-end
|
||||
.. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
:start-after: begin-min-hw-reqs-dx
|
||||
:end-before: end-min-hw-reqs-dx
|
||||
|
||||
--------------------------
|
||||
Installation Prerequisites
|
||||
--------------------------
|
||||
|
||||
.. include:: /shared/_includes/installation-prereqs.rest
|
||||
:start-after: begin-install-prereqs
|
||||
:end-before: end-install-prereqs
|
||||
|
||||
--------------------------------
|
||||
Prepare Servers for Installation
|
||||
--------------------------------
|
||||
|
||||
.. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
:start-after: start-prepare-servers-common
|
||||
:end-before: end-prepare-servers-common
|
||||
|
||||
--------------------------------
|
||||
Install Software on Controller-0
|
||||
--------------------------------
|
||||
|
||||
.. include:: /shared/_includes/inc-install-software-on-controller.rest
|
||||
:start-after: incl-install-software-controller-0-aio-start
|
||||
:end-before: incl-install-software-controller-0-aio-end
|
||||
|
||||
|
||||
|
||||
.. .. figure:: /shared/figures/deploy_install_guides/starlingx-deployment-options-duplex.png
|
||||
.. :width: 800
|
||||
|
||||
.. All-in-one Duplex deployment configuration
|
||||
|
||||
.. _installation-prereqs-duplex:
|
||||
|
||||
.. --------------------------
|
||||
.. Installation Prerequisites
|
||||
.. --------------------------
|
||||
|
||||
.. .. include:: /_includes/installation-prereqs.rest
|
||||
.. :start-after: begin-install-prereqs
|
||||
.. :end-before: end-install-prereqs
|
||||
|
||||
.. --------------------------------
|
||||
.. Prepare Servers for Installation
|
||||
.. --------------------------------
|
||||
|
||||
.. .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
.. :start-after: begin-min-hw-reqs-common-intro
|
||||
.. :end-before: end-min-hw-reqs-common-intro
|
||||
|
||||
.. .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
.. :start-after: begin-min-hw-reqs-dx
|
||||
.. :end-before: end-min-hw-reqs-dx
|
||||
|
||||
.. The following requirements must be met if :ref:`extending a Duplex
|
||||
.. installation <extend-dx-with-workers>`.
|
||||
|
||||
.. .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
.. :start-after: begin-worker-hw-reqs
|
||||
.. :end-before: end-worker-hw-reqs
|
||||
|
||||
.. --------------------------------
|
||||
.. Install Software on Controller-0
|
||||
.. --------------------------------
|
||||
|
||||
.. .. include:: /_includes/installing-software-on-controller-0.rest
|
||||
.. :start-after: begin-install-ctl-0
|
||||
.. :end-before: end-install-ctl-0
|
||||
|
||||
.. .. only:: starlingx
|
||||
|
||||
.. .. contents:: |minitoc|
|
||||
.. :local:
|
||||
.. :depth: 1
|
||||
|
||||
.. .. --------
|
||||
.. .. Overview
|
||||
.. .. --------
|
||||
|
||||
.. .. .. include:: /shared/_includes/installation-prereqs.rest
|
||||
.. .. :start-after: begin-install-prereqs-dx
|
||||
.. .. :end-before: end-install-prereqs-dx
|
||||
|
||||
.. ---------------------
|
||||
.. Hardware Requirements
|
||||
.. ---------------------
|
||||
|
||||
.. .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
.. :start-after: begin-min-hw-reqs-common-intro
|
||||
.. :end-before: end-min-hw-reqs-common-intro
|
||||
|
||||
.. .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
.. :start-after: begin-min-hw-reqs-dx
|
||||
.. :end-before: end-min-hw-reqs-dx
|
||||
|
||||
.. The following requirements must be met if :ref:`extending a Duplex
|
||||
.. installation <extend-dx-with-workers>`.
|
||||
|
||||
.. .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
.. :start-after: begin-worker-hw-reqs
|
||||
.. :end-before: end-worker-hw-reqs
|
||||
|
||||
.. .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
.. :start-after: start-prepare-servers-common
|
||||
.. :end-before: end-prepare-servers-common
|
||||
|
||||
.. This section describes the steps to install the StarlingX Kubernetes
|
||||
.. platform on a **StarlingX R7.0 All-in-one Duplex** deployment
|
||||
.. configuration.
|
||||
|
||||
.. .. contents::
|
||||
.. :local:
|
||||
.. :depth: 1
|
||||
|
||||
.. ---------------------
|
||||
.. Create a bootable USB
|
||||
.. ---------------------
|
||||
|
||||
.. Refer to :ref:`Bootable USB <bootable_usb>` for instructions on how
|
||||
.. to create a bootable USB with the StarlingX ISO on your system.
|
||||
|
||||
.. --------------------------------
|
||||
.. Install software on controller-0
|
||||
.. --------------------------------
|
||||
|
||||
.. .. include:: /shared/_includes/inc-install-software-on-controller.rest
|
||||
.. :start-after: incl-install-software-controller-0-aio-start
|
||||
.. :end-before: incl-install-software-controller-0-aio-end
|
||||
|
||||
--------------------------------
|
||||
Bootstrap system on controller-0
|
||||
@ -91,7 +217,7 @@ Bootstrap system on controller-0
|
||||
|
||||
.. only:: starlingx
|
||||
|
||||
.. include:: /_includes/ansible_install_time_only.txt
|
||||
.. include:: /shared/_includes/ansible_install_time_only.txt
|
||||
|
||||
Specify the user configuration override file for the Ansible bootstrap
|
||||
playbook using one of the following methods:
|
||||
@ -1155,6 +1281,16 @@ machine.
|
||||
|
||||
.. include:: /_includes/bootstrapping-and-deploying-starlingx.rest
|
||||
|
||||
.. _extend-dx-with-workers:
|
||||
|
||||
--------------------------------------------
|
||||
Optionally Extend Capacity with Worker Nodes
|
||||
--------------------------------------------
|
||||
|
||||
.. include:: /shared/_includes/aio_duplex_extend.rest
|
||||
:start-after: start-aio-duplex-extend
|
||||
:end-before: end-aio-duplex-extend
|
||||
|
||||
.. only:: starlingx
|
||||
|
||||
----------
|
||||
@ -1167,3 +1303,9 @@ machine.
|
||||
.. only:: partner
|
||||
|
||||
.. include:: /_includes/72hr-to-license.rest
|
||||
|
||||
Complete system configuration by reviewing procedures in:
|
||||
|
||||
- :ref:`index-security-84d0d8aa401b`
|
||||
- :ref:`index-sysconf-d511820651f0`
|
||||
- :ref:`index-admintasks-768a6e9aaeff`
|
||||
|
||||
@ -62,10 +62,10 @@ Prepare bare metal servers
|
||||
* Cabled for networking
|
||||
|
||||
* Far-end switch ports should be properly configured to realize the networking
|
||||
shown in the following diagram.
|
||||
shown in the diagram above.
|
||||
|
||||
.. figure:: /deploy_install_guides/r7_release/figures/starlingx-deployment-options-simplex.png
|
||||
:scale: 50%
|
||||
:alt: All-in-one Simplex deployment configuration
|
||||
.. .. figure:: /deploy_install_guides/r7_release/figures/starlingx-deployment-options-simplex.png
|
||||
.. :scale: 50%
|
||||
.. :alt: All-in-one Simplex deployment configuration
|
||||
|
||||
*All-in-one Simplex deployment configuration*
|
||||
.. *All-in-one Simplex deployment configuration*
|
||||
@ -5,34 +5,56 @@
|
||||
Install Kubernetes Platform on All-in-one Simplex
|
||||
=================================================
|
||||
|
||||
|
||||
.. only:: partner
|
||||
|
||||
.. include:: /_includes/install-kubernetes-null-labels.rest
|
||||
|
||||
.. only:: starlingx
|
||||
.. contents:: |minitoc|
|
||||
:local:
|
||||
:depth: 1
|
||||
|
||||
This section describes the steps to install the StarlingX Kubernetes
|
||||
platform on a **StarlingX R7.0 All-in-one Simplex** deployment
|
||||
configuration.
|
||||
--------
|
||||
Overview
|
||||
--------
|
||||
|
||||
.. contents::
|
||||
:local:
|
||||
:depth: 1
|
||||
.. _aiosx-installation-prereqs:
|
||||
|
||||
---------------------
|
||||
Create a bootable USB
|
||||
---------------------
|
||||
.. include:: /shared/_includes/desc_aio_simplex.txt
|
||||
|
||||
Refer to :ref:`Bootable USB <bootable_usb>` for instructions on how
|
||||
to create a bootable USB with the StarlingX ISO on your system.
|
||||
.. _installation-prereqs:
|
||||
|
||||
--------------------------------
|
||||
Install software on controller-0
|
||||
--------------------------------
|
||||
-----------------------------
|
||||
Minimum hardware requirements
|
||||
-----------------------------
|
||||
|
||||
.. include:: /shared/_includes/inc-install-software-on-controller.rest
|
||||
:start-after: incl-install-software-controller-0-aio-start
|
||||
:end-before: incl-install-software-controller-0-aio-end
|
||||
.. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
:start-after: begin-min-hw-reqs-sx
|
||||
:end-before: end-min-hw-reqs-sx
|
||||
|
||||
--------------------------
|
||||
Installation Prerequisites
|
||||
--------------------------
|
||||
|
||||
.. include:: /shared/_includes/installation-prereqs.rest
|
||||
:start-after: begin-install-prereqs
|
||||
:end-before: end-install-prereqs
|
||||
|
||||
--------------------------------
|
||||
Prepare Servers for Installation
|
||||
--------------------------------
|
||||
|
||||
.. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
:start-after: start-prepare-servers-common
|
||||
:end-before: end-prepare-servers-common
|
||||
|
||||
--------------------------------
|
||||
Install Software on Controller-0
|
||||
--------------------------------
|
||||
|
||||
.. include:: /shared/_includes/inc-install-software-on-controller.rest
|
||||
:start-after: incl-install-software-controller-0-aio-start
|
||||
:end-before: incl-install-software-controller-0-aio-end
|
||||
|
||||
--------------------------------
|
||||
Bootstrap system on controller-0
|
||||
@ -89,9 +111,8 @@ Bootstrap system on controller-0
|
||||
configuration override files for hosts. For example:
|
||||
``$HOME/<hostname>.yml``.
|
||||
|
||||
.. only:: starlingx
|
||||
|
||||
.. include:: /_includes/ansible_install_time_only.txt
|
||||
.. include:: /shared/_includes/ansible_install_time_only.txt
|
||||
|
||||
Specify the user configuration override file for the Ansible bootstrap
|
||||
playbook using one of the following methods:
|
||||
@ -214,9 +235,9 @@ The newly installed controller needs to be configured.
|
||||
|
||||
::
|
||||
|
||||
OAM_IF=<OAM-PORT>
|
||||
system host-if-modify controller-0 $OAM_IF -c platform
|
||||
system interface-network-assign controller-0 $OAM_IF oam
|
||||
~(keystone_admin)$ OAM_IF=<OAM-PORT>
|
||||
~(keystone_admin)$ system host-if-modify controller-0 $OAM_IF -c platform
|
||||
~(keystone_admin)$ system interface-network-assign controller-0 $OAM_IF oam
|
||||
|
||||
To configure a vlan or aggregated ethernet interface, see :ref:`Node
|
||||
Interfaces <node-interfaces-index>`.
|
||||
@ -225,7 +246,7 @@ The newly installed controller needs to be configured.
|
||||
|
||||
::
|
||||
|
||||
system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org
|
||||
~(keystone_admin)$ system ntp-modify ntpservers=0.pool.ntp.org,1.pool.ntp.org
|
||||
|
||||
To configure |PTP| instead of |NTP|, see :ref:`PTP Server Configuration
|
||||
<ptp-server-config-index>`.
|
||||
@ -250,9 +271,9 @@ The newly installed controller needs to be configured.
|
||||
|
||||
.. parsed-literal::
|
||||
|
||||
system host-label-assign controller-0 openstack-control-plane=enabled
|
||||
system host-label-assign controller-0 openstack-compute-node=enabled
|
||||
system host-label-assign controller-0 |vswitch-label|
|
||||
~(keystone_admin)$ system host-label-assign controller-0 openstack-control-plane=enabled
|
||||
~(keystone_admin)$ system host-label-assign controller-0 openstack-compute-node=enabled
|
||||
~(keystone_admin)$ system host-label-assign controller-0 |vswitch-label|
|
||||
|
||||
.. note::
|
||||
|
||||
@ -261,7 +282,7 @@ The newly installed controller needs to be configured.
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
system host-label-assign controller-0 sriov=enabled
|
||||
~(keystone_admin)$ system host-label-assign controller-0 sriov=enabled
|
||||
|
||||
.. only:: partner
|
||||
|
||||
@ -275,10 +296,10 @@ The newly installed controller needs to be configured.
|
||||
|
||||
Increase the number of platform cores with the following commands:
|
||||
|
||||
.. code-block::
|
||||
.. code-block:: bash
|
||||
|
||||
# Assign 6 cores on processor/numa-node 0 on controller-0 to platform
|
||||
system host-cpu-modify -f platform -p0 6 controller-0
|
||||
~(keystone_admin)$ system host-cpu-modify -f platform -p0 6 controller-0
|
||||
|
||||
#. Due to the additional OpenStack services' containers running on the
|
||||
controller host, the size of the Docker filesystem needs to be
|
||||
@ -287,9 +308,9 @@ The newly installed controller needs to be configured.
|
||||
.. code-block:: bash
|
||||
|
||||
# check existing size of docker fs
|
||||
system host-fs-list controller-0
|
||||
~(keystone_admin)$ system host-fs-list controller-0
|
||||
# check available space (Avail Size (GiB)) in cgts-vg LVG where docker fs is located
|
||||
system host-lvg-list controller-0
|
||||
~(keystone_admin)$ system host-lvg-list controller-0
|
||||
# if existing docker fs size + cgts-vg available space is less than
|
||||
# 80G, you will need to add a new disk partition to cgts-vg.
|
||||
# There must be at least 20GB of available space after the docker
|
||||
@ -299,22 +320,22 @@ The newly installed controller needs to be configured.
|
||||
# ( if not use another unused disk )
|
||||
|
||||
# Get device path of ROOT DISK
|
||||
system host-show controller-0 | fgrep rootfs
|
||||
~(keystone_admin)$ system host-show controller-0 | fgrep rootfs
|
||||
|
||||
# Get UUID of ROOT DISK by listing disks
|
||||
system host-disk-list controller-0
|
||||
~(keystone_admin)$ system host-disk-list controller-0
|
||||
|
||||
# Create new PARTITION on ROOT DISK, and take note of new partition's 'uuid' in response
|
||||
# Use a partition size such that you’ll be able to increase docker fs size from 30G to 60G
|
||||
PARTITION_SIZE=30
|
||||
system host-disk-partition-add -t lvm_phys_vol controller-0 <root-disk-uuid> ${PARTITION_SIZE}
|
||||
~(keystone_admin)$ PARTITION_SIZE=30
|
||||
~(keystone_admin)$ system host-disk-partition-add -t lvm_phys_vol controller-0 <root-disk-uuid> ${PARTITION_SIZE}
|
||||
|
||||
# Add new partition to ‘cgts-vg’ local volume group
|
||||
system host-pv-add controller-0 cgts-vg <NEW_PARTITION_UUID>
|
||||
sleep 2 # wait for partition to be added
|
||||
~(keystone_admin)$ system host-pv-add controller-0 cgts-vg <NEW_PARTITION_UUID>
|
||||
~(keystone_admin)$ sleep 2 # wait for partition to be added
|
||||
|
||||
# Increase docker filesystem to 60G
|
||||
system host-fs-modify controller-0 docker=60
|
||||
~(keystone_admin)$ system host-fs-modify controller-0 docker=60
|
||||
|
||||
#. **For OpenStack only:** Configure the system setting for the vSwitch.
|
||||
|
||||
@ -338,7 +359,7 @@ The newly installed controller needs to be configured.
|
||||
|
||||
::
|
||||
|
||||
system modify --vswitch_type none
|
||||
~(keystone_admin)$ system modify --vswitch_type none
|
||||
|
||||
This does not run any vSwitch directly on the host, instead, it uses
|
||||
the containerized |OVS| defined in the helm charts of
|
||||
@ -348,7 +369,7 @@ The newly installed controller needs to be configured.
|
||||
|
||||
.. parsed-literal::
|
||||
|
||||
system modify --vswitch_type |ovs-dpdk|
|
||||
~(keystone_admin)$ system modify --vswitch_type |ovs-dpdk|
|
||||
|
||||
Default recommendation for an |AIO|-controller is to use a single core
|
||||
for |OVS-DPDK| vSwitch.
|
||||
@ -356,7 +377,7 @@ The newly installed controller needs to be configured.
|
||||
.. code-block:: bash
|
||||
|
||||
# assign 1 core on processor/numa-node 0 on controller-0 to vswitch
|
||||
system host-cpu-modify -f vswitch -p0 1 controller-0
|
||||
~(keystone_admin)$ system host-cpu-modify -f vswitch -p0 1 controller-0
|
||||
|
||||
When using |OVS-DPDK|, configure 1G of huge pages for vSwitch memory on
|
||||
each |NUMA| node on the host. It is recommended
|
||||
@ -372,10 +393,10 @@ The newly installed controller needs to be configured.
|
||||
.. code-block::
|
||||
|
||||
# Assign 1x 1G huge page on processor/numa-node 0 on controller-0 to vswitch
|
||||
system host-memory-modify -f vswitch -1G 1 controller-0 0
|
||||
~(keystone_admin)$ system host-memory-modify -f vswitch -1G 1 controller-0 0
|
||||
|
||||
# Assign 1x 1G huge page on processor/numa-node 1 on controller-0 to vswitch
|
||||
system host-memory-modify -f vswitch -1G 1 controller-0 1
|
||||
~(keystone_admin)$ system host-memory-modify -f vswitch -1G 1 controller-0 1
|
||||
|
||||
.. important::
|
||||
|
||||
@ -390,10 +411,10 @@ The newly installed controller needs to be configured.
|
||||
.. code-block:: bash
|
||||
|
||||
# assign 1x 1G huge page on processor/numa-node 0 on controller-0 to applications
|
||||
system host-memory-modify -f application -1G 10 controller-0 0
|
||||
~(keystone_admin)$ system host-memory-modify -f application -1G 10 controller-0 0
|
||||
|
||||
# assign 1x 1G huge page on processor/numa-node 1 on controller-0 to applications
|
||||
system host-memory-modify -f application -1G 10 controller-0 1
|
||||
~(keystone_admin)$ system host-memory-modify -f application -1G 10 controller-0 1
|
||||
|
||||
.. note::
|
||||
|
||||
@ -405,19 +426,19 @@ The newly installed controller needs to be configured.
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
export NODE=controller-0
|
||||
~(keystone_admin)$ export NODE=controller-0
|
||||
|
||||
# Create ‘nova-local’ local volume group
|
||||
system host-lvg-add ${NODE} nova-local
|
||||
~(keystone_admin)$ system host-lvg-add ${NODE} nova-local
|
||||
|
||||
# Get UUID of DISK to create PARTITION to be added to ‘nova-local’ local volume group
|
||||
# CEPH OSD Disks can NOT be used
|
||||
# For best performance, do NOT use system/root disk, use a separate physical disk.
|
||||
|
||||
# List host’s disks and take note of UUID of disk to be used
|
||||
system host-disk-list ${NODE}
|
||||
~(keystone_admin)$ system host-disk-list ${NODE}
|
||||
# ( if using ROOT DISK, select disk with device_path of
|
||||
# ‘system host-show ${NODE} | fgrep rootfs’ )
|
||||
# host-show ${NODE} | fgrep rootfs’ )
|
||||
|
||||
# Create new PARTITION on selected disk, and take note of new partition’s ‘uuid’ in response
|
||||
# The size of the PARTITION needs to be large enough to hold the aggregate size of
|
||||
@ -426,13 +447,13 @@ The newly installed controller needs to be configured.
|
||||
# The following example uses a small PARTITION size such that you can fit it on the
|
||||
# root disk, if that is what you chose above.
|
||||
# Additional PARTITION(s) from additional disks can be added later if required.
|
||||
PARTITION_SIZE=30
|
||||
~(keystone_admin)$ PARTITION_SIZE=30
|
||||
|
||||
system host-disk-partition-add -t lvm_phys_vol ${NODE} <disk-uuid> ${PARTITION_SIZE}
|
||||
~(keystone_admin)$ system host-disk-partition-add -t lvm_phys_vol ${NODE} <disk-uuid> ${PARTITION_SIZE}
|
||||
|
||||
# Add new partition to ‘nova-local’ local volume group
|
||||
system host-pv-add ${NODE} nova-local <NEW_PARTITION_UUID>
|
||||
sleep 2
|
||||
~(keystone_admin)$ system host-pv-add ${NODE} nova-local <NEW_PARTITION_UUID>
|
||||
~(keystone_admin)$ sleep 2
|
||||
|
||||
|
||||
#. **For OpenStack only:** Configure data interfaces for controller-0.
|
||||
@ -449,31 +470,31 @@ The newly installed controller needs to be configured.
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
export NODE=controller-0
|
||||
~(keystone_admin)$ NODE=controller-0
|
||||
|
||||
# List inventoried host’s ports and identify ports to be used as ‘data’ interfaces,
|
||||
# based on displayed linux port name, pci address and device type.
|
||||
system host-port-list ${NODE}
|
||||
~(keystone_admin)$ system host-port-list ${NODE}
|
||||
|
||||
# List host’s auto-configured ‘ethernet’ interfaces,
|
||||
# find the interfaces corresponding to the ports identified in previous step, and
|
||||
# take note of their UUID
|
||||
system host-if-list -a ${NODE}
|
||||
~(keystone_admin)$ system host-if-list -a ${NODE}
|
||||
|
||||
# Modify configuration for these interfaces
|
||||
# Configuring them as ‘data’ class interfaces, MTU of 1500 and named data#
|
||||
system host-if-modify -m 1500 -n data0 -c data ${NODE} <data0-if-uuid>
|
||||
system host-if-modify -m 1500 -n data1 -c data ${NODE} <data1-if-uuid>
|
||||
~(keystone_admin)$ system host-if-modify -m 1500 -n data0 -c data ${NODE} <data0-if-uuid>
|
||||
~(keystone_admin)$ system host-if-modify -m 1500 -n data1 -c data ${NODE} <data1-if-uuid>
|
||||
|
||||
# Create Data Networks that vswitch 'data' interfaces will be connected to
|
||||
DATANET0='datanet0'
|
||||
DATANET1='datanet1'
|
||||
system datanetwork-add ${DATANET0} vlan
|
||||
system datanetwork-add ${DATANET1} vlan
|
||||
~(keystone_admin)$ DATANET0='datanet0'
|
||||
~(keystone_admin)$ DATANET1='datanet1'
|
||||
~(keystone_admin)$ system datanetwork-add ${DATANET0} vlan
|
||||
~(keystone_admin)$ system datanetwork-add ${DATANET1} vlan
|
||||
|
||||
# Assign Data Networks to Data Interfaces
|
||||
system interface-datanetwork-assign ${NODE} <data0-if-uuid> ${DATANET0}
|
||||
system interface-datanetwork-assign ${NODE} <data1-if-uuid> ${DATANET1}
|
||||
~(keystone_admin)$ system interface-datanetwork-assign ${NODE} <data0-if-uuid> ${DATANET0}
|
||||
~(keystone_admin)$ system interface-datanetwork-assign ${NODE} <data1-if-uuid> ${DATANET1}
|
||||
|
||||
|
||||
*****************************************
|
||||
@ -496,32 +517,32 @@ Optionally Configure PCI-SRIOV Interfaces
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
export NODE=controller-0
|
||||
~(keystone_admin)$ export NODE=controller-0
|
||||
|
||||
# List inventoried host’s ports and identify ports to be used as ‘pci-sriov’ interfaces,
|
||||
# based on displayed linux port name, pci address and device type.
|
||||
system host-port-list ${NODE}
|
||||
~(keystone_admin)$ system host-port-list ${NODE}
|
||||
|
||||
# List host’s auto-configured ‘ethernet’ interfaces,
|
||||
# find the interfaces corresponding to the ports identified in previous step, and
|
||||
# take note of their UUID
|
||||
system host-if-list -a ${NODE}
|
||||
~(keystone_admin)$ system host-if-list -a ${NODE}
|
||||
|
||||
# Modify configuration for these interfaces
|
||||
# Configuring them as ‘pci-sriov’ class interfaces, MTU of 1500 and named sriov#
|
||||
system host-if-modify -m 1500 -n sriov0 -c pci-sriov ${NODE} <sriov0-if-uuid> -N <num_vfs>
|
||||
system host-if-modify -m 1500 -n sriov1 -c pci-sriov ${NODE} <sriov1-if-uuid> -N <num_vfs>
|
||||
~(keystone_admin)$ system host-if-modify -m 1500 -n sriov0 -c pci-sriov ${NODE} <sriov0-if-uuid> -N <num_vfs>
|
||||
~(keystone_admin)$ system host-if-modify -m 1500 -n sriov1 -c pci-sriov ${NODE} <sriov1-if-uuid> -N <num_vfs>
|
||||
|
||||
# If not already created, create Data Networks that the 'pci-sriov' interfaces will
|
||||
# be connected to
|
||||
DATANET0='datanet0'
|
||||
DATANET1='datanet1'
|
||||
system datanetwork-add ${DATANET0} vlan
|
||||
system datanetwork-add ${DATANET1} vlan
|
||||
~(keystone_admin)$ DATANET0='datanet0'
|
||||
~(keystone_admin)$ DATANET1='datanet1'
|
||||
~(keystone_admin)$ system datanetwork-add ${DATANET0} vlan
|
||||
~(keystone_admin)$ system datanetwork-add ${DATANET1} vlan
|
||||
|
||||
# Assign Data Networks to PCI-SRIOV Interfaces
|
||||
system interface-datanetwork-assign ${NODE} <sriov0-if-uuid> ${DATANET0}
|
||||
system interface-datanetwork-assign ${NODE} <sriov1-if-uuid> ${DATANET1}
|
||||
~(keystone_admin)$ system interface-datanetwork-assign ${NODE} <sriov0-if-uuid> ${DATANET0}
|
||||
~(keystone_admin)$ system interface-datanetwork-assign ${NODE} <sriov1-if-uuid> ${DATANET1}
|
||||
|
||||
|
||||
* **For Kubernetes Only:** To enable using |SRIOV| network attachments for
|
||||
@ -531,19 +552,19 @@ Optionally Configure PCI-SRIOV Interfaces
|
||||
|
||||
::
|
||||
|
||||
system host-label-assign controller-0 sriovdp=enabled
|
||||
~(keystone_admin)$ system host-label-assign controller-0 sriovdp=enabled
|
||||
|
||||
* If planning on running |DPDK| in Kubernetes hosted application
|
||||
* If you are planning on running |DPDK| in Kubernetes hosted application
|
||||
containers on this host, configure the number of 1G Huge pages required
|
||||
on both |NUMA| nodes.
|
||||
|
||||
.. code-block:: bash
|
||||
|
||||
# assign 10x 1G huge page on processor/numa-node 0 on controller-0 to applications
|
||||
system host-memory-modify -f application controller-0 0 -1G 10
|
||||
~(keystone_admin)$ system host-memory-modify -f application controller-0 0 -1G 10
|
||||
|
||||
# assign 10x 1G huge page on processor/numa-node 1 on controller-0 to applications
|
||||
system host-memory-modify -f application controller-0 1 -1G 10
|
||||
~(keystone_admin)$ system host-memory-modify -f application controller-0 1 -1G 10
|
||||
|
||||
|
||||
***************************************************************
|
||||
@ -570,7 +591,7 @@ For host-based Ceph:
|
||||
|
||||
::
|
||||
|
||||
system storage-backend-add ceph --confirmed
|
||||
~(keystone_admin)$ system storage-backend-add ceph --confirmed
|
||||
|
||||
#. Add an |OSD| on controller-0 for host-based Ceph:
|
||||
|
||||
@ -578,13 +599,13 @@ For host-based Ceph:
|
||||
|
||||
# List host’s disks and identify disks you want to use for CEPH OSDs, taking note of their UUID
|
||||
# By default, /dev/sda is being used as system disk and can not be used for OSD.
|
||||
system host-disk-list controller-0
|
||||
~(keystone_admin)$ system host-disk-list controller-0
|
||||
|
||||
# Add disk as an OSD storage
|
||||
system host-stor-add controller-0 osd <disk-uuid>
|
||||
~(keystone_admin)$ system host-stor-add controller-0 osd <disk-uuid>
|
||||
|
||||
# List OSD storage devices
|
||||
system host-stor-list controller-0
|
||||
~(keystone_admin)$ system host-stor-list controller-0
|
||||
|
||||
|
||||
.. only:: starlingx
|
||||
@ -595,15 +616,15 @@ For host-based Ceph:
|
||||
|
||||
::
|
||||
|
||||
system storage-backend-add ceph-rook --confirmed
|
||||
~(keystone_admin)$ system storage-backend-add ceph-rook --confirmed
|
||||
|
||||
#. Assign Rook host labels to controller-0 in support of installing the
|
||||
rook-ceph-apps manifest/helm-charts later:
|
||||
|
||||
::
|
||||
|
||||
system host-label-assign controller-0 ceph-mon-placement=enabled
|
||||
system host-label-assign controller-0 ceph-mgr-placement=enabled
|
||||
~(keystone_admin)$ system host-label-assign controller-0 ceph-mon-placement=enabled
|
||||
~(keystone_admin)$ system host-label-assign controller-0 ceph-mgr-placement=enabled
|
||||
|
||||
|
||||
.. incl-config-controller-0-openstack-specific-aio-simplex-end:
|
||||
@ -619,7 +640,7 @@ Unlock controller-0 to bring it into service:
|
||||
|
||||
::
|
||||
|
||||
system host-unlock controller-0
|
||||
~(keystone_admin)$ system host-unlock controller-0
|
||||
|
||||
Controller-0 will reboot in order to apply configuration changes and come into
|
||||
service. This can take 5-10 minutes, depending on the performance of the host
|
||||
@ -640,7 +661,7 @@ machine.
|
||||
::
|
||||
|
||||
$ source /etc/platform/openrc
|
||||
$ system application-list
|
||||
~(keystone_admin)$ system application-list
|
||||
+---------------------+---------+-------------------------------+---------------+----------+-----------+
|
||||
| application | version | manifest name | manifest file | status | progress |
|
||||
+---------------------+---------+-------------------------------+---------------+----------+-----------+
|
||||
@ -653,9 +674,9 @@ machine.
|
||||
|
||||
::
|
||||
|
||||
system host-disk-wipe -s --confirm controller-0 /dev/sdb
|
||||
~(keystone_admin)$ system host-disk-wipe -s --confirm controller-0 /dev/sdb
|
||||
|
||||
values.yaml for rook-ceph-apps.
|
||||
``values.yaml`` for rook-ceph-apps.
|
||||
|
||||
.. code-block:: yaml
|
||||
|
||||
@ -668,19 +689,19 @@ machine.
|
||||
|
||||
::
|
||||
|
||||
system helm-override-update rook-ceph-apps rook-ceph kube-system --values values.yaml
|
||||
~(keystone_admin)$ system helm-override-update rook-ceph-apps rook-ceph kube-system --values values.yaml
|
||||
|
||||
#. Apply the rook-ceph-apps application.
|
||||
|
||||
::
|
||||
|
||||
system application-apply rook-ceph-apps
|
||||
~(keystone_admin)$ system application-apply rook-ceph-apps
|
||||
|
||||
#. Wait for |OSDs| pod to be ready.
|
||||
|
||||
::
|
||||
|
||||
kubectl get pods -n kube-system
|
||||
~(keystone_admin)$ kubectl get pods -n kube-system
|
||||
rook--ceph-crashcollector-controller-0-764c7f9c8-bh5c7 1/1 Running 0 62m
|
||||
rook--ceph-mgr-a-69df96f57-9l28p 1/1 Running 0 63m
|
||||
rook--ceph-mon-a-55fff49dcf-ljfnx 1/1 Running 0 63m
|
||||
@ -702,3 +723,9 @@ machine.
|
||||
.. only:: partner
|
||||
|
||||
.. include:: /_includes/72hr-to-license.rest
|
||||
|
||||
Complete system configuration by reviewing procedures in:
|
||||
|
||||
- :ref:`index-security-84d0d8aa401b`
|
||||
- :ref:`index-sysconf-d511820651f0`
|
||||
- :ref:`index-admintasks-768a6e9aaeff`
|
||||
|
||||
@ -1,3 +1,4 @@
|
||||
|hideable|
|
||||
|
||||
.. _controller_storage_install_kubernetes_r7:
|
||||
|
||||
@ -5,30 +6,116 @@
|
||||
Install Kubernetes Platform on Standard with Controller Storage
|
||||
===============================================================
|
||||
|
||||
.. contents::
|
||||
.. contents:: |minitoc|
|
||||
:local:
|
||||
:depth: 1
|
||||
|
||||
.. only:: starlingx
|
||||
.. only:: partner
|
||||
|
||||
This section describes the steps to install the StarlingX Kubernetes
|
||||
platform on a **StarlingX R7.0 Standard with Controller Storage**
|
||||
deployment configuration.
|
||||
.. include:: /_includes/install-kubernetes-null-labels.rest
|
||||
|
||||
-------------------
|
||||
Create bootable USB
|
||||
-------------------
|
||||
--------
|
||||
Overview
|
||||
--------
|
||||
|
||||
Refer to :ref:`Bootable USB <bootable_usb>` for instructions on how to
|
||||
create a bootable USB with the StarlingX ISO on your system.
|
||||
.. _std-installation-prereqs:
|
||||
|
||||
--------------------------------
|
||||
Install software on controller-0
|
||||
--------------------------------
|
||||
.. include:: /shared/_includes/desc_controller_storage.txt
|
||||
|
||||
.. include:: /shared/_includes/inc-install-software-on-controller.rest
|
||||
:start-after: incl-install-software-controller-0-standard-start
|
||||
:end-before: incl-install-software-controller-0-standard-end
|
||||
.. _installation-prereqs-std:
|
||||
|
||||
-----------------------------
|
||||
Minimum hardware requirements
|
||||
-----------------------------
|
||||
|
||||
.. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
:start-after: begin-min-hw-reqs-std
|
||||
:end-before: end-min-hw-reqs-std
|
||||
|
||||
.. .. figure:: /shared/figures/deploy_install_guides/starlingx-deployment-options-controller-storage.png
|
||||
.. :width: 800
|
||||
|
||||
.. Controller storage deployment configuration
|
||||
|
||||
.. _installation-prereqs-standard:
|
||||
|
||||
--------------------------
|
||||
Installation Prerequisites
|
||||
--------------------------
|
||||
|
||||
.. include:: /shared/_includes/installation-prereqs.rest
|
||||
:start-after: begin-install-prereqs
|
||||
:end-before: end-install-prereqs
|
||||
|
||||
--------------------------------
|
||||
Prepare Servers for Installation
|
||||
--------------------------------
|
||||
|
||||
.. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
:start-after: start-prepare-servers-common
|
||||
:end-before: end-prepare-servers-common
|
||||
|
||||
|
||||
--------------------------------
|
||||
Install Software on Controller-0
|
||||
--------------------------------
|
||||
|
||||
.. include:: /shared/_includes/inc-install-software-on-controller.rest
|
||||
:start-after: incl-install-software-controller-0-standard-start
|
||||
:end-before: incl-install-software-controller-0-standard-end
|
||||
|
||||
|
||||
|
||||
.. .. only:: starlingx
|
||||
..
|
||||
.. .. --------
|
||||
.. .. Overview
|
||||
.. .. --------
|
||||
..
|
||||
.. .. .. include:: /shared/_includes/installation-prereqs.rest
|
||||
.. .. :start-after: begin-install-prereqs-std
|
||||
.. .. :end-before: end-install-prereqs-std
|
||||
..
|
||||
.. ---------------------
|
||||
.. Hardware Requirements
|
||||
.. ---------------------
|
||||
..
|
||||
.. .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
.. :start-after: begin-min-hw-reqs-common-intro
|
||||
.. :end-before: end-min-hw-reqs-common-intro
|
||||
..
|
||||
.. .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
.. :start-after: begin-min-hw-reqs-std
|
||||
.. :end-before: end-min-hw-reqs-std
|
||||
..
|
||||
.. The following requirements must be met for worker nodes.
|
||||
..
|
||||
.. .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
.. :start-after: begin-worker-hw-reqs
|
||||
.. :end-before: end-worker-hw-reqs
|
||||
..
|
||||
.. .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
.. :start-after: start-prepare-servers-common
|
||||
.. :end-before: end-prepare-servers-common
|
||||
..
|
||||
.. This section describes the steps to install the StarlingX Kubernetes
|
||||
.. platform on a **StarlingX R7.0 Standard with Controller Storage**
|
||||
.. deployment configuration.
|
||||
..
|
||||
.. -------------------
|
||||
.. Create bootable USB
|
||||
.. -------------------
|
||||
..
|
||||
.. Refer to :ref:`Bootable USB <bootable_usb>` for instructions on how to
|
||||
.. create a bootable USB with the StarlingX ISO on your system.
|
||||
..
|
||||
.. --------------------------------
|
||||
.. Install software on controller-0
|
||||
.. --------------------------------
|
||||
..
|
||||
.. .. include:: /shared/_includes/inc-install-software-on-controller.rest
|
||||
.. :start-after: incl-install-software-controller-0-standard-start
|
||||
.. :end-before: incl-install-software-controller-0-standard-end
|
||||
|
||||
--------------------------------
|
||||
Bootstrap system on controller-0
|
||||
@ -90,7 +177,7 @@ Bootstrap system on controller-0
|
||||
|
||||
.. only:: starlingx
|
||||
|
||||
.. include:: /_includes/ansible_install_time_only.txt
|
||||
.. include:: /shared/_includes/ansible_install_time_only.txt
|
||||
|
||||
Specify the user configuration override file for the Ansible bootstrap
|
||||
playbook using one of the following methods:
|
||||
@ -926,3 +1013,9 @@ If configuring Ceph Storage Backend, Add Ceph OSDs to controllers
|
||||
.. only:: partner
|
||||
|
||||
.. include:: /_includes/72hr-to-license.rest
|
||||
|
||||
Complete system configuration by reviewing procedures in:
|
||||
|
||||
- :ref:`index-security-84d0d8aa401b`
|
||||
- :ref:`index-sysconf-d511820651f0`
|
||||
- :ref:`index-admintasks-768a6e9aaeff`
|
||||
|
||||
@ -1,38 +1,124 @@
|
||||
|
||||
|hideable|
|
||||
|
||||
.. _dedicated_storage_install_kubernetes_r7:
|
||||
|
||||
.. only:: partner
|
||||
|
||||
.. include:: /_includes/install-kubernetes-null-labels.rest
|
||||
|
||||
==============================================================
|
||||
Install Kubernetes Platform on Standard with Dedicated Storage
|
||||
==============================================================
|
||||
|
||||
This section describes the steps to install the |prod| Kubernetes platform on a
|
||||
**Standard with Dedicated Storage** deployment configuration.
|
||||
|
||||
.. contents::
|
||||
:local:
|
||||
:depth: 1
|
||||
|
||||
.. only:: starlingx
|
||||
.. only:: partner
|
||||
|
||||
-------------------
|
||||
Create bootable USB
|
||||
-------------------
|
||||
.. include:: /_includes/install-kubernetes-null-labels.rest
|
||||
|
||||
Refer to :ref:`Bootable USB <bootable_usb>` for instructions on how to
|
||||
create a bootable USB with the StarlingX ISO on your system.
|
||||
--------
|
||||
Overview
|
||||
--------
|
||||
|
||||
--------------------------------
|
||||
Install software on controller-0
|
||||
--------------------------------
|
||||
.. _ded-installation-prereqs:
|
||||
|
||||
.. include:: /shared/_includes/inc-install-software-on-controller.rest
|
||||
:start-after: incl-install-software-controller-0-standard-start
|
||||
:end-before: incl-install-software-controller-0-standard-end
|
||||
.. include:: /shared/_includes/desc_dedicated_storage.txt
|
||||
|
||||
-----------------------------
|
||||
Minimum hardware requirements
|
||||
-----------------------------
|
||||
|
||||
.. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
:start-after: begin-min-hw-reqs-ded
|
||||
:end-before: end-min-hw-reqs-ded
|
||||
|
||||
.. _installation-prereqs-dedicated:
|
||||
|
||||
--------------------------
|
||||
Installation Prerequisites
|
||||
--------------------------
|
||||
|
||||
.. include:: /shared/_includes/installation-prereqs.rest
|
||||
:start-after: begin-install-prereqs
|
||||
:end-before: end-install-prereqs
|
||||
|
||||
|
||||
--------------------------------
|
||||
Prepare Servers for Installation
|
||||
--------------------------------
|
||||
|
||||
.. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
:start-after: start-prepare-servers-common
|
||||
:end-before: end-prepare-servers-common
|
||||
|
||||
--------------------------------
|
||||
Install Software on Controller-0
|
||||
--------------------------------
|
||||
|
||||
.. include:: /shared/_includes/inc-install-software-on-controller.rest
|
||||
:start-after: incl-install-software-controller-0-standard-start
|
||||
:end-before: incl-install-software-controller-0-standard-end
|
||||
|
||||
.. --------------------------------
|
||||
.. Install Software on Controller-0
|
||||
.. --------------------------------
|
||||
|
||||
.. .. include:: /_includes/installing-software-on-controller-0.rest
|
||||
.. :start-after: begin-install-ctl-0
|
||||
.. :end-before: end-install-ctl-0
|
||||
|
||||
|
||||
.. .. only:: starlingx
|
||||
..
|
||||
.. .. --------
|
||||
.. .. Overview
|
||||
.. .. --------
|
||||
..
|
||||
.. .. .. include:: /shared/_includes/installation-prereqs.rest
|
||||
.. .. :start-after: begin-install-prereqs-ded
|
||||
.. .. :end-before: end-install-prereqs-ded
|
||||
..
|
||||
.. ---------------------
|
||||
.. Hardware Requirements
|
||||
.. ---------------------
|
||||
..
|
||||
.. .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
.. :start-after: begin-min-hw-reqs-common-intro
|
||||
.. :end-before: end-min-hw-reqs-common-intro
|
||||
..
|
||||
.. .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
.. :start-after: begin-min-hw-reqs-sx
|
||||
.. :end-before: end-min-hw-reqs-sx
|
||||
..
|
||||
.. The following requirements must be met for worker nodes.
|
||||
..
|
||||
.. .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
.. :start-after: begin-worker-hw-reqs
|
||||
.. :end-before: end-worker-hw-reqs
|
||||
..
|
||||
.. The following requirements must be met for storage nodes.
|
||||
..
|
||||
.. .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
.. :start-after: begin-storage-hw-reqs
|
||||
.. :end-before: end-storage-hw-reqs
|
||||
..
|
||||
.. .. include:: /shared/_includes/prepare-servers-for-installation-91baad307173.rest
|
||||
.. :start-after: start-prepare-servers-common
|
||||
.. :end-before: end-prepare-servers-common
|
||||
..
|
||||
.. -------------------
|
||||
.. Create bootable USB
|
||||
.. -------------------
|
||||
..
|
||||
.. Refer to :ref:`Bootable USB <bootable_usb>` for instructions on how to
|
||||
.. create a bootable USB with the StarlingX ISO on your system.
|
||||
..
|
||||
.. --------------------------------
|
||||
.. Install software on controller-0
|
||||
.. --------------------------------
|
||||
..
|
||||
.. .. include:: /shared/_includes/inc-install-software-on-controller.rest
|
||||
.. :start-after: incl-install-software-controller-0-standard-start
|
||||
.. :end-before: incl-install-software-controller-0-standard-end
|
||||
|
||||
--------------------------------
|
||||
Bootstrap system on controller-0
|
||||
@ -533,3 +619,9 @@ host machine.
|
||||
.. only:: partner
|
||||
|
||||
.. include:: /_includes/72hr-to-license.rest
|
||||
|
||||
Complete system configuration by reviewing procedures in:
|
||||
|
||||
- :ref:`index-security-84d0d8aa401b`
|
||||
- :ref:`index-sysconf-d511820651f0`
|
||||
- :ref:`index-admintasks-768a6e9aaeff`
|
||||
|
||||
@ -2,6 +2,10 @@
|
||||
Install Ironic on StarlingX R7.0
|
||||
================================
|
||||
|
||||
.. include:: /_includes/ironic.rest
|
||||
|
||||
.. include:: /_includes/ironic_hardware.rest
|
||||
|
||||
This section describes the steps to install Ironic on a standard configuration,
|
||||
either:
|
||||
|
||||
|
||||
@ -1,22 +0,0 @@
|
||||
=======================================================
|
||||
Bare metal Standard with Rook Storage Installation R7.0
|
||||
=======================================================
|
||||
|
||||
--------
|
||||
Overview
|
||||
--------
|
||||
|
||||
.. include:: /shared/_includes/desc_rook_storage.txt
|
||||
|
||||
.. include:: /shared/_includes/ipv6_note.txt
|
||||
|
||||
|
||||
------------
|
||||
Installation
|
||||
------------
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
rook_storage_hardware
|
||||
rook_storage_install_kubernetes
|
||||
@ -1,6 +1,14 @@
|
||||
=====================================================================
|
||||
Install StarlingX Kubernetes on Bare Metal Standard with Rook Storage
|
||||
=====================================================================
|
||||
.. _install-rook-storage-on-bare-metal:
|
||||
|
||||
====================================================================
|
||||
Install Kubernetes Platform on Bare Metal Standard with Rook Storage
|
||||
====================================================================
|
||||
|
||||
|
||||
.. include:: /_includes/rook_storage.rest
|
||||
|
||||
.. include:: /_includes/rook_storage_hardware.rest
|
||||
|
||||
|
||||
This section describes the steps to install the StarlingX Kubernetes platform
|
||||
on a **StarlingX R7.0 bare metal Standard with Rook Storage** deployment
|
||||
@ -98,7 +106,7 @@ Bootstrap system on controller-0
|
||||
The default location where Ansible looks for and imports user
|
||||
configuration override files for hosts. For example: ``$HOME/<hostname>.yml``.
|
||||
|
||||
.. include:: /_includes/ansible_install_time_only.txt
|
||||
.. include:: /shared/_includes/ansible_install_time_only.txt
|
||||
|
||||
Specify the user configuration override file for the Ansible bootstrap
|
||||
playbook using one of the following methods:
|
||||
@ -213,9 +221,9 @@ Configure controller-0
|
||||
#. Refer to :ref:`docker_proxy_config` for
|
||||
details about Docker proxy settings.
|
||||
|
||||
*************************************
|
||||
|
||||
OpenStack-specific host configuration
|
||||
*************************************
|
||||
-------------------------------------
|
||||
|
||||
.. important::
|
||||
|
||||
@ -303,9 +311,9 @@ OpenStack-specific host configuration
|
||||
|
||||
.. incl-config-controller-0-storage-end:
|
||||
|
||||
********************************
|
||||
|
||||
Rook-specific host configuration
|
||||
********************************
|
||||
--------------------------------
|
||||
|
||||
.. important::
|
||||
|
||||
@ -443,9 +451,9 @@ install procedure.)
|
||||
system interface-network-assign controller-1 $OAM_IF oam
|
||||
system interface-network-assign controller-1 $MGMT_IF cluster-host
|
||||
|
||||
*************************************
|
||||
|
||||
OpenStack-specific host configuration
|
||||
*************************************
|
||||
-------------------------------------
|
||||
|
||||
.. important::
|
||||
|
||||
@ -461,9 +469,9 @@ of installing the |prefix|-openstack manifest and helm-charts later.
|
||||
|
||||
.. incl-config-controller-1-end:
|
||||
|
||||
********************************
|
||||
|
||||
Rook-specific host configuration
|
||||
********************************
|
||||
--------------------------------
|
||||
|
||||
.. important::
|
||||
|
||||
@ -577,9 +585,9 @@ Configure worker nodes
|
||||
set +ex
|
||||
done
|
||||
|
||||
*************************************
|
||||
|
||||
OpenStack-specific host configuration
|
||||
*************************************
|
||||
-------------------------------------
|
||||
|
||||
.. important::
|
||||
|
||||
|
||||
@ -1,5 +1,7 @@
|
||||
.. _index-install-r7-distcloud-46f4880ec78b:
|
||||
|
||||
.. 11/21/2022 - deprecated in favor of DC guide instructions.
|
||||
|
||||
===================================
|
||||
Distributed Cloud Installation R7.0
|
||||
===================================
|
||||
@ -6,8 +6,8 @@ Development StarlingX Installation
|
||||
|
||||
.. note::
|
||||
|
||||
This Installation guide is for the upcoming release of
|
||||
|prod|, and is not supported.
|
||||
This installation guide is for the upcoming release of |prod|, and may not
|
||||
work due to pre-release inconsistencies between documentation and code.
|
||||
|
||||
To install the most recent released verion of |prod|, see:
|
||||
https://docs.starlingx.io/r/stx.7.0/deploy_install_guides/r7_release/index-install-r7-8966076f0e81.html
|
||||
@ -42,12 +42,40 @@ Install StarlingX Kubernetes on bare metal
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
bare_metal/aio_simplex
|
||||
bare_metal/aio_duplex
|
||||
bare_metal/controller_storage
|
||||
bare_metal/dedicated_storage
|
||||
bare_metal/ironic
|
||||
bare_metal/rook_storage
|
||||
bare_metal/aio_simplex_install_kubernetes
|
||||
bare_metal/aio_duplex_install_kubernetes
|
||||
bare_metal/controller_storage_install_kubernetes
|
||||
bare_metal/rook_storage_install_kubernetes
|
||||
bare_metal/dedicated_storage_install_kubernetes
|
||||
bare_metal/ironic_install
|
||||
|
||||
-----------------
|
||||
Access Kubernetes
|
||||
-----------------
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
kubernetes_access
|
||||
|
||||
--------------------------------------
|
||||
Install and Access StarlingX OpenStack
|
||||
--------------------------------------
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
openstack/index-install-r7-os-adc44604968c
|
||||
|
||||
---------------------------------------
|
||||
Install Distributed Cloud on Bare metal
|
||||
---------------------------------------
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
/dist_cloud/index-dist-cloud-f5dbeb16b976
|
||||
|
||||
|
||||
**********
|
||||
Appendixes
|
||||
@ -101,7 +129,6 @@ Add hosts in bulk
|
||||
bare_metal/adding-hosts-in-bulk
|
||||
bare_metal/bulk-host-xml-file-format
|
||||
|
||||
|
||||
Reinstall a system or a host
|
||||
,,,,,,,,,,,,,,,,,,,,,,,,,,,,
|
||||
|
||||
@ -117,30 +144,3 @@ Reinstall a system or a host
|
||||
|
||||
ansible_bootstrap_configs
|
||||
|
||||
-------------------------------------------------
|
||||
Install StarlingX Distributed Cloud on bare metal
|
||||
-------------------------------------------------
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
distributed_cloud/index-install-r7-distcloud-46f4880ec78b
|
||||
|
||||
-----------------
|
||||
Access Kubernetes
|
||||
-----------------
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
kubernetes_access
|
||||
|
||||
--------------------------
|
||||
Access StarlingX OpenStack
|
||||
--------------------------
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
openstack/index-install-r7-os-adc44604968c
|
||||
|
||||
|
||||
@ -84,7 +84,7 @@ On virtual controller-0:
|
||||
The default location where Ansible looks for and imports user
|
||||
configuration override files for hosts. For example: ``$HOME/<hostname>.yml``.
|
||||
|
||||
.. include:: /_includes/ansible_install_time_only.txt
|
||||
.. include:: /shared/_includes/ansible_install_time_only.txt
|
||||
|
||||
Specify the user configuration override file for the Ansible bootstrap
|
||||
playbook using one of the following methods:
|
||||
|
||||
@ -85,7 +85,7 @@ On virtual controller-0:
|
||||
The default location where Ansible looks for and imports user
|
||||
configuration override files for hosts. For example: ``$HOME/<hostname>.yml``.
|
||||
|
||||
.. include:: /_includes/ansible_install_time_only.txt
|
||||
.. include:: /shared/_includes/ansible_install_time_only.txt
|
||||
|
||||
Specify the user configuration override file for the Ansible bootstrap
|
||||
playbook using one of the following methods:
|
||||
|
||||
@ -89,7 +89,7 @@ On virtual controller-0:
|
||||
The default location where Ansible looks for and imports user
|
||||
configuration override files for hosts. For example: ``$HOME/<hostname>.yml``.
|
||||
|
||||
.. include:: /_includes/ansible_install_time_only.txt
|
||||
.. include:: /shared/_includes/ansible_install_time_only.txt
|
||||
|
||||
Specify the user configuration override file for the Ansible bootstrap
|
||||
playbook using one of the following methods:
|
||||
|
||||
@ -2,6 +2,8 @@
|
||||
Extend Capacity with Worker Nodes
|
||||
=================================
|
||||
|
||||
.. start-aio-duplex-extend
|
||||
|
||||
This section describes the steps to extend capacity with worker nodes on a
|
||||
|prod| All-in-one Duplex deployment configuration.
|
||||
|
||||
@ -338,3 +340,5 @@ Unlock worker nodes in order to bring them into service:
|
||||
The worker nodes will reboot to apply configuration changes and come into
|
||||
service. This can take 5-10 minutes, depending on the performance of the host
|
||||
machine.
|
||||
|
||||
.. end-aio-duplex-extend
|
||||
@ -4,4 +4,4 @@
|
||||
|
||||
Review the set of install-time-only parameters before installation and confirm that your values for these parameters are correct for the desired installation.
|
||||
|
||||
Refer to :ref:`Ansible install-time-only parameters <install-time-only-params-r6>` for details.
|
||||
Refer to :ref:`Ansible install-time-only parameters <install-time-only-params-r7>` for details.
|
||||
@ -13,8 +13,9 @@ An AIO-DX configuration provides the following benefits:
|
||||
* Containers or virtual machines scheduled on both worker functions
|
||||
* Protection against overall server hardware fault, where
|
||||
|
||||
* All controller HA services go active on the remaining healthy server
|
||||
* All virtual machines are recovered on the remaining healthy server
|
||||
* All controller |HA| services go active on the remaining healthy server
|
||||
* All containers and/or virtual machines are recovered on the remaining healthy
|
||||
server
|
||||
|
||||
.. note::
|
||||
|
||||
@ -27,3 +28,6 @@ An AIO-DX configuration provides the following benefits:
|
||||
:alt: All-in-one Duplex deployment configuration
|
||||
|
||||
*Figure 1: All-in-one Duplex deployment configuration*
|
||||
|
||||
.. include:: /shared/_includes/ipv6_note.txt
|
||||
|
||||
|
||||
@ -4,7 +4,7 @@ following benefits:
|
||||
|
||||
* Requires only a small amount of cloud processing and storage power
|
||||
* Application consolidation using multiple containers or virtual machines on a
|
||||
single pair of physical servers
|
||||
single physical server
|
||||
* A storage backend solution using a single-node CEPH deployment
|
||||
|
||||
.. note::
|
||||
@ -12,12 +12,15 @@ following benefits:
|
||||
If you are behind a corporate firewall or proxy, you need to set proxy
|
||||
settings. Refer to :ref:`docker_proxy_config` for details.
|
||||
|
||||
.. figure:: /deploy_install_guides/r6_release/figures/starlingx-deployment-options-simplex.png
|
||||
.. figure:: /deploy_install_guides/r7_release/figures/starlingx-deployment-options-simplex.png
|
||||
:scale: 50%
|
||||
:alt: All-in-one Simplex deployment configuration
|
||||
|
||||
*Figure 1: All-in-one Simplex deployment configuration*
|
||||
|
||||
An AIO-SX deployment gives no protection against overall server hardware fault.
|
||||
An |AIO-SX| deployment gives no protection against overall server hardware fault.
|
||||
Hardware component protection can be enabled with, for example, a hardware RAID
|
||||
or 2x Port LAG in the deployment.
|
||||
or 2x Port |LAG| in the deployment.
|
||||
|
||||
.. include:: /shared/_includes/ipv6_note.txt
|
||||
|
||||
|
||||
@ -25,3 +25,6 @@ A Standard with Controller Storage configuration provides the following benefits
|
||||
:alt: Standard with Controller Storage deployment configuration
|
||||
|
||||
*Figure 1: Standard with Controller Storage deployment configuration*
|
||||
|
||||
.. include:: /shared/_includes/ipv6_note.txt
|
||||
|
||||
|
||||
@ -4,12 +4,15 @@ with independent controller, worker, and storage nodes.
|
||||
A Standard with Dedicated Storage configuration provides the following benefits:
|
||||
|
||||
* A pool of up to 200 worker nodes
|
||||
|
||||
* A 2x node high availability (HA) controller cluster with HA services running
|
||||
across the controller nodes in either active/active or active/standby mode
|
||||
* A storage back end solution using a two-to-9x node HA CEPH storage cluster
|
||||
|
||||
* A storage back end solution using a two-to-9x node |HA| CEPH storage cluster
|
||||
that supports a replication factor of two or three
|
||||
* Up to four groups of 2x storage nodes, or up to three groups of 3x storage
|
||||
nodes
|
||||
|
||||
* Up to four groups of 2x storage nodes, or up to three groups of 3x storage
|
||||
nodes
|
||||
|
||||
.. note::
|
||||
|
||||
@ -21,3 +24,6 @@ A Standard with Dedicated Storage configuration provides the following benefits:
|
||||
:alt: Standard with Dedicated Storage deployment configuration
|
||||
|
||||
*Figure 1: Standard with Dedicated Storage deployment configuration*
|
||||
|
||||
.. include:: /shared/_includes/ipv6_note.txt
|
||||
|
||||
|
||||
@ -1,22 +1,74 @@
|
||||
.. incl-install-software-controller-0-aio-start
|
||||
|
||||
Installing software on controller-0 is the second step in the |prod|
|
||||
installation procedure.
|
||||
|
||||
.. note::
|
||||
|
||||
The disks and disk partitions need to be wiped before the install. Installing
|
||||
a Debian ISO may fail with a message that the system is in emergency mode if
|
||||
the disks and disk partitions are not completely wiped before the install,
|
||||
especially if the server was previously running a CentOS ISO.
|
||||
|
||||
.. only:: partner
|
||||
|
||||
.. include:: /_includes/debian-rn-link-a90a7e432679.rest
|
||||
|
||||
#. Insert the bootable USB into a bootable USB port on the host you are
|
||||
configuring as controller-0.
|
||||
|
||||
.. note::
|
||||
|
||||
Refer to :ref:`bootable_usb` for instructions on how
|
||||
to create a bootable USB with the |prod| ISO.
|
||||
|
||||
.. note::
|
||||
|
||||
Alternatively one can PXEBOOT controller-0. See
|
||||
:ref:`configuring-a-pxe-boot-server-r7` for details on how to setup a
|
||||
PXEBOOT Server and pxe-boot the |prod| load on controller-0
|
||||
|
||||
#. Power on the host.
|
||||
|
||||
#. Attach to a console, ensure the host boots from the USB, and wait for the
|
||||
StarlingX Installer Menus.
|
||||
|prod| Installer Menus.
|
||||
|
||||
#. Make the following menu selections in the installer:
|
||||
#. Wait for the Install menus, and when prompted, make the following menu
|
||||
selections in the installer:
|
||||
|
||||
#. First menu: Select 'All-in-one Controller Configuration'
|
||||
.. note::
|
||||
|
||||
#. Second menu: Select 'Graphical Console' or 'Textual Console' depending on
|
||||
your terminal access to the console port
|
||||
If you configured the default menu options into the ISO with the
|
||||
``update-iso.sh`` script (using the ``-d`` option) in
|
||||
:ref:`Installation Prerequisites <aiosx-installation-prereqs>`,
|
||||
then the **Install** menu will not appear.
|
||||
|
||||
#. Wait for non-interactive install of software to complete and server to reboot.
|
||||
This can take 5-10 minutes, depending on the performance of the server.
|
||||
#. Select the appropriate deployment option for your scenario.
|
||||
|
||||
For All-in-one deployments, choose one of the All-in-One Configurations,
|
||||
either standard kernel or real-time/low-latency kernel.
|
||||
|
||||
**Standard Controller Configuration**
|
||||
For a standard configuration with controller or dedicated storage.
|
||||
|
||||
**All-in-one Controller Configuration**
|
||||
For an |AIO| Simplex or Duplex configuration.
|
||||
|
||||
**All-in-one Controller Configuration (Low Latency)**
|
||||
For an AIO Simplex or Duplex configuration with Low Latency Kernel.
|
||||
|
||||
#. Choose **Graphical Console** or **Serial Console** depending on your
|
||||
terminal access to the console port.
|
||||
|
||||
Wait for non-interactive install of software to complete and server to
|
||||
reboot. This can take 5-10 minutes, depending on the performance of the
|
||||
server.
|
||||
|
||||
Wait for the non-interactive software installation to complete and for
|
||||
the server to reboot. This can take 5-10 minutes, depending on the performance
|
||||
of the server.
|
||||
|
||||
.. include:: /_includes/install-patch-ctl-0.rest
|
||||
|
||||
.. incl-install-software-controller-0-aio-end
|
||||
|
||||
@ -28,14 +80,14 @@
|
||||
#. Power on the host.
|
||||
|
||||
#. Attach to a console, ensure the host boots from the USB, and wait for the
|
||||
StarlingX Installer Menus.
|
||||
|prod| Installer Menus.
|
||||
|
||||
#. Make the following menu selections in the installer:
|
||||
|
||||
#. First menu: Select 'Standard Controller Configuration'
|
||||
#. First menu: Select **Standard Controller Configuration**.
|
||||
|
||||
#. Second menu: Select 'Graphical Console' or 'Textual Console' depending on
|
||||
your terminal access to the console port.
|
||||
#. Second menu: Select **Graphical Console** or **Textual Console** depending
|
||||
on your terminal access to the console port.
|
||||
|
||||
#. Wait for non-interactive install of software to complete and server to reboot.
|
||||
This can take 5-10 minutes, depending on the performance of the server.
|
||||
|
||||
139
doc/source/shared/_includes/installation-prereqs.rest
Normal file
139
doc/source/shared/_includes/installation-prereqs.rest
Normal file
@ -0,0 +1,139 @@
|
||||
.. _installation-prereqs:
|
||||
|
||||
|
||||
==========================
|
||||
Installation Prerequisites
|
||||
==========================
|
||||
|
||||
.. begin-install-prereqs
|
||||
|
||||
Several pre-requisites must be completed prior to starting the |prod|
|
||||
installation.
|
||||
|
||||
Before attempting to install |prod|, ensure that you have the following:
|
||||
|
||||
.. _installation-pre-requisites-ul-uzl-rny-q3b:
|
||||
|
||||
|
||||
- The |prod-long| host installer ISO image file.
|
||||
|
||||
- The ``update-iso.sh`` script.
|
||||
|
||||
.. include:: /_includes/installation-prereqs.rest
|
||||
:start-after: begin-vdr-additional-prereqs
|
||||
:end-before: end-vdr-additional-prereqs
|
||||
|
||||
- *Optionally*, if required, update the ISO image to modify installation boot
|
||||
parameters, automatically select boot menu options and/or add a kickstart
|
||||
file to automatically perform configurations such as configuring the initial
|
||||
IP Interface for bootstrapping.
|
||||
|
||||
Use the ``update-iso.sh`` script from |dnload-loc|. The script syntax and
|
||||
options are:
|
||||
|
||||
.. code-block::
|
||||
|
||||
update-iso.sh -i <input bootimage.iso> -o <output bootimage.iso>
|
||||
[ -a <ks-addon.cfg> ] [ -p param=value ]
|
||||
[ -d <default menu option> ] [ -t <menu timeout> ]
|
||||
-i <file>: Specify input ISO file
|
||||
-o <file>: Specify output ISO file
|
||||
-a <file>: Specify ks-addon.cfg file
|
||||
-p <p=v>: Specify boot parameter
|
||||
|
||||
Examples:
|
||||
-p rootfs_device=nvme0n1
|
||||
-p boot_device=nvme0n1
|
||||
-p rootfs_device=/dev/disk/by-path/pci-0000:00:0d.0-ata-1.0
|
||||
-p boot_device=/dev/disk/by-path/pci-0000:00:0d.0-ata-1.0
|
||||
|
||||
-d <default menu option>:
|
||||
Specify default boot menu option:
|
||||
0 - Standard Controller, Serial Console
|
||||
1 - Standard Controller, Graphical Console
|
||||
2 - AIO, Serial Console
|
||||
3 - AIO, Graphical Console
|
||||
4 - AIO Low-latency, Serial Console
|
||||
5 - AIO Low-latency, Graphical Console
|
||||
NULL - Clear default selection
|
||||
-t <menu timeout>:
|
||||
Specify boot menu timeout, in seconds
|
||||
|
||||
The following example ks-addon.cfg file, used with the -a option, sets up
|
||||
an initial IP interface at boot time by defining a VLAN on an Ethernet
|
||||
interface and has it use DHCP to request an IP address:
|
||||
|
||||
.. code-block::
|
||||
|
||||
#### start ks-addon.cfg
|
||||
OAM_DEV=enp0s3
|
||||
OAM_VLAN=1234
|
||||
|
||||
cat << EOF > /etc/sysconfig/network-scripts/ifcfg-$OAM_DEV
|
||||
DEVICE=$OAM_DEV
|
||||
BOOTPROTO=none
|
||||
ONBOOT=yes
|
||||
LINKDELAY=20
|
||||
EOF
|
||||
|
||||
cat << EOF > /etc/sysconfig/network-scripts/ifcfg-$OAM_DEV.$OAM_VLAN
|
||||
DEVICE=$OAM_DEV.$OAM_VLAN
|
||||
BOOTPROTO=dhcp
|
||||
ONBOOT=yes
|
||||
VLAN=yes
|
||||
LINKDELAY=20
|
||||
EOF
|
||||
#### end ks-addon.cfg
|
||||
|
||||
After updating the ISO image, create a bootable USB with the ISO or put the
|
||||
ISO on a PXEBOOT server. See the next bullet for details.
|
||||
|
||||
- A mechanism for boot installation of the |prod-long| host installer ISO
|
||||
downloaded from |dnload-loc|. This can be either:
|
||||
|
||||
- a bootable USB drive with the |prod-long| host installer ISO.
|
||||
|
||||
Refer to :ref:`bootable_usb` for instructions on how to create a
|
||||
bootable USB with the StarlingX ISO on your system.
|
||||
|
||||
- the ISO image on a |PXE| boot server on the same network as the server
|
||||
that will be used as the initial controller-0. See Appendix
|
||||
:ref:`Installing Controller-0 from a PXE Boot Server
|
||||
<configuring-a-pxe-boot-server-r7>` for details
|
||||
|
||||
|
||||
- For all controller or AIO controller servers, |OAM| Network connectivity to:
|
||||
|
||||
- the |BMC| ports of all nodes
|
||||
|
||||
- An external DNS Server. This is required for accessing |org| Docker
|
||||
Registry as discussed below.
|
||||
|
||||
- A Docker Registry(s) containing the Docker images for the |prod| load
|
||||
accessible via the |OAM| Network.
|
||||
|
||||
You can use one of the following options:
|
||||
|
||||
.. only:: partner
|
||||
|
||||
- The |org| Docker Registry. This is the default option.
|
||||
|
||||
.. only:: starlingx
|
||||
|
||||
- The public open source registries (i.e. docker.io, k8s.gcr.io,
|
||||
ghcr.io, gcr.io, quay.io). This is the default option.
|
||||
|
||||
- A private Docker Registry populated with the docker images from the
|
||||
|reg-string|.
|
||||
|
||||
.. only:: partner
|
||||
|
||||
.. include:: /_includes/bootstrapping-from-a-private-docker-registry.rest
|
||||
|
||||
|
||||
- A record of the IP addresses allocated for the public interfaces for your
|
||||
deployment \(that is IP addresses for the |OAM| Network and |SRIOV| Data
|
||||
Networks\).
|
||||
|
||||
|
||||
.. end-install-prereqs
|
||||
@ -1,13 +1,15 @@
|
||||
.. note::
|
||||
|
||||
By default, StarlingX uses IPv4. To use StarlingX with IPv6:
|
||||
By default, |prod| uses IPv4. To use |prod| with IPv6:
|
||||
|
||||
* The entire infrastructure and cluster configuration must be IPv6, with the
|
||||
exception of the PXE boot network.
|
||||
exception of the |PXE| boot network.
|
||||
|
||||
* Not all external servers are reachable via IPv6 addresses (for example
|
||||
Docker registries). Depending on your infrastructure, it may be necessary
|
||||
to deploy a NAT64/DNS64 gateway to translate the IPv4 addresses to IPv6.
|
||||
|
||||
* Refer to :ref:`stx_ipv6_deployment` for details on how to deploy a
|
||||
NAT64/DNS64 gateway to use StarlingX with IPv6.
|
||||
.. only:: starlingx
|
||||
|
||||
.. include:: /_includes/ipv6_note_bullet.rest
|
||||
|
||||
|
||||
@ -0,0 +1,700 @@
|
||||
|
||||
=====================
|
||||
Hardware Requirements
|
||||
=====================
|
||||
|
||||
.. begin-min-hw-reqs-common-intro
|
||||
|
||||
.. ........
|
||||
.. Preamble common to all deployments
|
||||
.. ........
|
||||
|
||||
-----------------------------
|
||||
Minimum hardware requirements
|
||||
-----------------------------
|
||||
|
||||
This section describes the hardware requirements and server preparation for a
|
||||
|prod-long| |this-ver| |bare-metal| deployment.
|
||||
|
||||
.. contents::
|
||||
:local:
|
||||
:depth: 1
|
||||
|
||||
The recommended minimum hardware requirements for |bare-metal| servers for various
|
||||
host types are:
|
||||
|
||||
.. end-min-hw-reqs-common-intro
|
||||
|
||||
.. ........
|
||||
.. Simplex
|
||||
.. ........
|
||||
|
||||
.. begin-prepare-servers
|
||||
.. begin-min-hw-reqs-sx
|
||||
|
||||
|
||||
The recommended minimum hardware requirements for |bare-metal| servers for various
|
||||
host types are:
|
||||
|
||||
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
|
||||
* - Minimum Requirements
|
||||
- All-in-one Controller Node
|
||||
* - Number of servers
|
||||
- 1
|
||||
* - Minimum processor class
|
||||
- Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) 8 cores/socket
|
||||
|
||||
or
|
||||
|
||||
Single-CPU Intel® Xeon® D-15xx family, 8 cores (low-power/low-cost option)
|
||||
|
||||
.. note::
|
||||
|
||||
* Platform: 2x physical cores (4x logical cores if hyper-threading), (by
|
||||
default, configurable)
|
||||
* Application: Remaining cores
|
||||
* - Minimum memory
|
||||
- 64 GB
|
||||
|
||||
* Platform:
|
||||
|
||||
- Socket 0: 7GB (by default, configurable)
|
||||
|
||||
- Socket 1: 1GB (by default, configurable)
|
||||
|
||||
* Application:
|
||||
|
||||
- Socket 0: Remaining memory
|
||||
|
||||
- Socket 1: Remaining memory
|
||||
|
||||
* - Primary disk
|
||||
- 500 GB SSD or |NVMe| (see :ref:`nvme_config`)
|
||||
* - Additional disks
|
||||
- * 1 or more 500 GB (min. 10K RPM) for Ceph |OSD|
|
||||
|
||||
* Recommended, but not required: 1 or more |SSDs| or |NVMe| drives for
|
||||
Ceph journals (min. 1024 MiB per |OSD| journal)
|
||||
|
||||
* Recommended, but not required: 1 or more 500G HDs (min. 10K RPM), |SSDs|
|
||||
or |NVMe| drives for Container ephemeral disk storage.
|
||||
|
||||
.. only:: openstack
|
||||
|
||||
* For |prod-os|, we recommend 1 or more 500 GB (min. 10K RPM) for |VM| local
|
||||
ephemeral storage
|
||||
|
||||
* - Minimum network ports
|
||||
- * MGMT: 1x1GE ( Recommended: MGMT 2x10GE LAG ) *Only required if subcloud is
|
||||
in Distributed Cloud*.
|
||||
* |OAM|: 1x1GE (Recommended: |OAM|: 2x1GE LAG)
|
||||
|
||||
* Data: 1 or more x 10GE (Recommended: Data: 2x10GE |LAG|)
|
||||
|
||||
* - USB
|
||||
- 1 (Only required if used for initial installation of controller-0).
|
||||
* - Boot order
|
||||
- HD, PXE, USB
|
||||
* - BIOS mode
|
||||
- BIOS or UEFI
|
||||
|
||||
.. note::
|
||||
|
||||
|UEFI| Secure Boot and |UEFI| |PXE| boot over IPv6 are not supported. On
|
||||
systems with an IPv6 management network, you can use a separate IPv4
|
||||
network for |PXE| boot. For more information, see
|
||||
:ref:`configuring-a-pxe-boot-server-r7`.
|
||||
* - BIOS settings
|
||||
- * Hyper-Threading technology enabled
|
||||
|
||||
* Virtualization technology enabled
|
||||
|
||||
* VT for directed I/O enabled
|
||||
|
||||
* CPU power and performance policy set to performance
|
||||
|
||||
* Minimum Processor Idle Power; CPU C state control disabled
|
||||
|
||||
* Plug & play |BMC| detection disabled
|
||||
|
||||
.. end-min-hw-reqs-sx
|
||||
|
||||
--------------------------
|
||||
Prepare bare metal servers
|
||||
--------------------------
|
||||
|
||||
.. include:: prep_servers.txt
|
||||
|
||||
* Cabled for networking
|
||||
|
||||
* Far-end switch ports should be properly configured to realize the networking
|
||||
shown in the diagram below.
|
||||
|
||||
.. figure:: /deploy_install_guides/r7_release/figures/starlingx-deployment-options-simplex.png
|
||||
:scale: 50%
|
||||
:alt: All-in-one Simplex deployment configuration
|
||||
|
||||
*All-in-one Simplex deployment configuration*
|
||||
|
||||
|
||||
.. end-prepare-servers
|
||||
|
||||
|
||||
.. ........
|
||||
.. Duplex
|
||||
.. ........
|
||||
|
||||
.. begin-prepare-servers-dx
|
||||
.. begin-min-hw-reqs-dx
|
||||
|
||||
|
||||
This section describes the hardware requirements and server preparation for a
|
||||
|prod-long| |this-ver| |bare-metal| Duplex deployment configuration.
|
||||
|
||||
The recommended minimum hardware requirements for |bare-metal| servers for various
|
||||
host types are:
|
||||
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
|
||||
* - Minimum Requirements
|
||||
- All-in-one Controller Node
|
||||
- Worker Node
|
||||
* - Number of servers
|
||||
- 2
|
||||
- 2-|max-workers|
|
||||
* - Minimum processor class
|
||||
- * Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) 8 cores/socket
|
||||
|
||||
or
|
||||
|
||||
* Single-CPU Intel® Xeon® D-15xx family, 8 cores (low-power/low-cost option)
|
||||
|
||||
.. note::
|
||||
|
||||
* Platform: 2x physical cores (4x logical cores if hyper-threading), (by
|
||||
default, configurable)
|
||||
* Application: Remaining cores
|
||||
- (Same as controller node)
|
||||
* - Minimum memory
|
||||
- 64 GB
|
||||
|
||||
* Platform:
|
||||
|
||||
- Socket 0: 7GB (by default, configurable)
|
||||
|
||||
- Socket 1: 1GB (by default, configurable)
|
||||
|
||||
* Application:
|
||||
|
||||
- Socket 0: Remaining memory
|
||||
|
||||
- Socket 1: Remaining memory
|
||||
- 32 GB
|
||||
* - Primary disk
|
||||
- 500 GB SSD or |NVMe| (see :ref:`nvme_config`)
|
||||
- 120 GB (Minimum 10k RPM)
|
||||
* - Additional disks
|
||||
- * 1 or more 500 GB (min. 10K RPM) for Ceph |OSD|
|
||||
|
||||
* Recommended, but not required: 1 or more |SSDs| or |NVMe| drives for
|
||||
Ceph journals (min. 1024 MiB per |OSD| journal)
|
||||
|
||||
* Recommended, but not required: 1 or more 500G HDs (min. 10K RPM), |SSDs|
|
||||
or |NVMe| drives for Container ephemeral disk storage.
|
||||
|
||||
* For |prod-os|, we recommend 1 or more 500 GB (min. 10K RPM) for |VM| local
|
||||
ephemeral storage
|
||||
|
||||
- For |prod-os|, we recommend 1 or more 500 GB (min. 10K RPM) for |VM| local
|
||||
ephemeral storage
|
||||
* - Minimum network ports
|
||||
- * MGMT: 1x1GE ( Recommended: MGMT 2x10GE LAG ).
|
||||
|
||||
* |OAM|: 1x1GE (Recommended: |OAM|: 2x1GE LAG)
|
||||
|
||||
* Data: 1 or more x 10GE (Recommended: Data: 2x10GE |LAG|)
|
||||
|
||||
- * Mgmt/Cluster: 1x10GE (Recommended: MGMT 2x10GE LAG)
|
||||
|
||||
* Data: 1 or more x 10GE (Recommended: Data 2x10GE LAG)
|
||||
|
||||
* - USB
|
||||
- 1 (Only required if used for initial installation of controller-0).
|
||||
-
|
||||
* - Board Management
|
||||
-
|
||||
- 1 |BMC|
|
||||
* - Boot order
|
||||
- HD, PXE, USB
|
||||
- HD, PXE
|
||||
* - BIOS mode
|
||||
- BIOS or UEFI
|
||||
|
||||
.. note::
|
||||
|
||||
|UEFI| Secure Boot and |UEFI| |PXE| boot over IPv6 are not supported. On
|
||||
systems with an IPv6 management network, you can use a separate IPv4
|
||||
network for |PXE| boot. For more information, see
|
||||
:ref:`configuring-a-pxe-boot-server-r7`.
|
||||
- BIOS or UEFI
|
||||
* - Bios settings
|
||||
- * Hyper-Threading technology enabled
|
||||
|
||||
* Virtualization technology enabled
|
||||
|
||||
* VT for directed I/O enabled
|
||||
|
||||
* CPU power and performance policy set to performance
|
||||
|
||||
* CPU C state control disabled
|
||||
|
||||
* Plug & play |BMC| detection disabled
|
||||
|
||||
- (Same as controller node)
|
||||
|
||||
.. end-min-hw-reqs-dx
|
||||
|
||||
--------------------------
|
||||
Prepare bare metal servers
|
||||
--------------------------
|
||||
|
||||
.. include:: prep_servers.txt
|
||||
|
||||
* Cabled for networking
|
||||
|
||||
* Far-end switch ports should be properly configured to realize the networking
|
||||
shown in the diagram above.
|
||||
|
||||
|
||||
.. end-prepare-servers-dx
|
||||
|
||||
.. ........
|
||||
.. Standard with storage
|
||||
.. ........
|
||||
|
||||
.. begin-prepare-servers-std
|
||||
.. begin-min-hw-reqs-std
|
||||
|
||||
This section describes the hardware requirements and server preparation for a
|
||||
|prod-long| |this-ver| |bare-metal| Standard with Controller Storage deployment
|
||||
configuration.
|
||||
|
||||
The recommended minimum hardware requirements for |bare-metal| servers for various
|
||||
host types are:
|
||||
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
|
||||
* - Minimum Requirements
|
||||
- Controller Node
|
||||
- Worker Node
|
||||
* - Number of servers
|
||||
- 2
|
||||
- 2-|max-workers|
|
||||
* - Minimum processor class
|
||||
- Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) 8 cores/socket
|
||||
|
||||
.. note:: All cores are used by the platform.
|
||||
- Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) 8 cores/socket
|
||||
|
||||
.. note::
|
||||
|
||||
* Platform: 1x physical cores (2x logical cores if hyper-threading),
|
||||
(by default, configurable)
|
||||
* Application: Remaining cores
|
||||
* - Minimum memory
|
||||
- 64 GB
|
||||
- 32 GB
|
||||
* - Primary disk
|
||||
- 500 GB SSD or |NVMe| (see :ref:`nvme_config`)
|
||||
- 120 GB (Minimum 10k RPM)
|
||||
* - Additional disks
|
||||
- * 1 or more 500 GB (min. 10K RPM) for Ceph |OSD|
|
||||
|
||||
* Recommended, but not required: 1 or more |SSDs| or |NVMe| drives for
|
||||
Ceph journals (min. 1024 MiB per |OSD| journal)
|
||||
- For |prod-os|, we recommend 1 or more 500 GB (min. 10K RPM) for |VM| local
|
||||
ephemeral storage
|
||||
|
||||
Recommended but not required: 1 or more 500G HDs (min. 10K RPM), |SSDs| or
|
||||
|NVMe| drives for Container ephemeral disk storage.
|
||||
* - Minimum network ports
|
||||
- * MGMT: 1x1GE (Recommended: MGMT 2x10GE LAG)
|
||||
* |OAM|: 1x1GE (Recommended: |OAM|: 2x1GE LAG)
|
||||
* Data: 1 or more x 10GE (Recommended: Data: 2x10GE |LAG|)
|
||||
- * Mgmt/Cluster: 1x10GE (Recommended: MGMT 2x10GE LAG)
|
||||
|
||||
* Data: 1 or more x 10GE (Recommended: Data: 2x10GE |LAG|)
|
||||
* - USB
|
||||
- 1 (Only required if used for initial installation of controller-0).
|
||||
-
|
||||
* - Board Management
|
||||
-
|
||||
- 1 |BMC|
|
||||
* - Boot order
|
||||
- HD, PXE, USB
|
||||
- HD, PXE
|
||||
* - BIOS mode
|
||||
- BIOS or UEFI
|
||||
|
||||
.. note::
|
||||
|
||||
|UEFI| Secure Boot and |UEFI| |PXE| boot over IPv6 are not supported. On
|
||||
systems with an IPv6 management network, you can use a separate IPv4
|
||||
network for |PXE| boot. For more information, see
|
||||
:ref:`configuring-a-pxe-boot-server-r7`.
|
||||
- BIOS or UEFI
|
||||
* - Bios settings
|
||||
- * Hyper-Threading technology enabled
|
||||
|
||||
* Virtualization technology (VTD, VTX) enabled
|
||||
|
||||
* VT for directed I/O enabled
|
||||
|
||||
* CPU power and performance policy set to performance
|
||||
|
||||
* CPU C state control disabled
|
||||
|
||||
* Plug & play |BMC| detection disabled
|
||||
|
||||
- (Same as controller node)
|
||||
|
||||
.. end-min-hw-reqs-std
|
||||
|
||||
--------------------------
|
||||
Prepare bare metal servers
|
||||
--------------------------
|
||||
|
||||
.. include:: prep_servers.txt
|
||||
|
||||
* Cabled for networking
|
||||
|
||||
* Far-end switch ports should be properly configured to realize the networking
|
||||
shown in the diagram above.
|
||||
|
||||
|
||||
.. end-prepare-servers-std
|
||||
|
||||
|
||||
.. ........
|
||||
.. Dedicated storage
|
||||
.. ........
|
||||
|
||||
.. begin-prepare-servers-ded
|
||||
.. begin-min-hw-reqs-ded
|
||||
|
||||
This section describes the hardware requirements and server preparation for a
|
||||
|prod-long| |this-ver| |bare-metal| Standard with Dedicated Storage deployment
|
||||
configuration.
|
||||
|
||||
The recommended minimum hardware requirements for |bare-metal| servers for various
|
||||
host types are:
|
||||
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
|
||||
* - Minimum Requirements
|
||||
- Controller Node
|
||||
- Storage Node
|
||||
- Worker Node
|
||||
* - Number of servers
|
||||
- 2
|
||||
- 2-9
|
||||
- 2-|max-workers|
|
||||
* - Minimum processor class
|
||||
- Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) 8 cores/socket
|
||||
|
||||
.. note:: All cores are used by the platform.
|
||||
|
||||
- Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) 8 cores/socket
|
||||
|
||||
.. note:: All cores are used for Ceph Storage Cluster.
|
||||
|
||||
- Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) 8 cores/socket
|
||||
|
||||
.. note::
|
||||
|
||||
* Platform: 1x physical cores (2x logical cores if hyper-threading),
|
||||
(by default, configurable)
|
||||
* Application: Remaining cores
|
||||
|
||||
* - Minimum memory
|
||||
- 64 GB
|
||||
- 64 GB
|
||||
- 32 GB
|
||||
* - Primary disk
|
||||
- 500 GB SSD or |NVMe| (see :ref:`nvme_config`)
|
||||
- 120 GB (min. 10k RPM)
|
||||
- 120 GB (min. 10k RPM)
|
||||
* - Additional disks
|
||||
- None
|
||||
- * 1 or more 500 GB (min. 10K RPM) for Ceph |OSD|
|
||||
|
||||
* Recommended, but not required: 1 or more |SSDs| or |NVMe| drives for
|
||||
Ceph journals (min. 1024 MiB per |OSD| journal)
|
||||
- For |prod-os|, we recommend 1 or more 500 GB (min. 10K RPM) for |VM| ephemeral
|
||||
storage
|
||||
|
||||
Recommended, but not required: 1 or more 500G HDs (min. 10K RPM), |SSDs|
|
||||
or |NVMe| drives for Container ephemeral disk storage.
|
||||
|
||||
* - Minimum network ports
|
||||
- * MGMT: 1x1GE ( Recommended: MGMT 2x10GE LAG ).
|
||||
* |OAM|: 1x1GE (Recommended: |OAM|: 2x1GE LAG)
|
||||
* Data: 1 or more x 10GE (Recommended: Data: 2x10GE |LAG|)
|
||||
- Mgmt: 1x10GE
|
||||
- * Mgmt/Cluster: 1x10GE 1x10GE (Recommended: MGMT 2x10GE LAG)
|
||||
|
||||
* Data: 1 or more x 10GE (Recommended: Data 2x10GE LAG)
|
||||
* - USB
|
||||
- 1 (Only required if used for initial installation of controller-0).
|
||||
-
|
||||
-
|
||||
* - Board Management
|
||||
-
|
||||
-
|
||||
- 1 |BMC|
|
||||
* - Boot order
|
||||
- HD, PXE, USB
|
||||
-
|
||||
- HD, PXE
|
||||
* - BIOS mode
|
||||
- BIOS or UEFI
|
||||
|
||||
.. note::
|
||||
|
||||
|UEFI| Secure Boot and |UEFI| |PXE| boot over IPv6 are not supported. On
|
||||
systems with an IPv6 management network, you can use a separate IPv4
|
||||
network for |PXE| boot. For more information, see
|
||||
:ref:`configuring-a-pxe-boot-server-r7`.
|
||||
- BIOS or UEFI
|
||||
- BIOS or UEFI
|
||||
* - Bios settings
|
||||
- * Hyper-Threading technology enabled
|
||||
|
||||
* Virtualization technology (VTD, VTX) enabled
|
||||
|
||||
* VT for directed I/O enabled
|
||||
|
||||
* CPU power and performance policy set to performance
|
||||
|
||||
* CPU C state control disabled
|
||||
|
||||
* Plug & play |BMC| detection disabled
|
||||
- (Same as controller node)
|
||||
- (Same as controller node)
|
||||
|
||||
.. end-min-hw-reqs-ded
|
||||
|
||||
--------------------------
|
||||
Prepare bare metal servers
|
||||
--------------------------
|
||||
|
||||
.. include:: prep_servers.txt
|
||||
|
||||
* Cabled for networking
|
||||
|
||||
* Far-end switch ports should be properly configured to realize the networking
|
||||
shown in the diagram above.
|
||||
|
||||
|
||||
.. end-prepare-servers-ded
|
||||
|
||||
.. start-prepare-servers-common
|
||||
|
||||
Preparing servers is the first step of the |prod| installation procedure.
|
||||
|
||||
|
||||
Prior to starting the |prod| installation, ensure that the |bare-metal|
|
||||
servers are in the following state:
|
||||
|
||||
- Physically installed.
|
||||
|
||||
- Cabled for power.
|
||||
|
||||
- Cabled for networking.
|
||||
|
||||
Far-end switch ports should be properly configured to realize the
|
||||
networking shown in the diagram earlier in this topic.
|
||||
|
||||
- All disks are wiped.
|
||||
|
||||
This ensures that servers will boot from either the network or USB
|
||||
storage, if present.
|
||||
|
||||
.. note::
|
||||
|
||||
The disks and disk partitions need to be wiped before the install.
|
||||
Installing a Debian ISO may fail with a message that the system is
|
||||
in emergency mode if the disks and disk partitions are not
|
||||
completely wiped before the install, especially if the server was
|
||||
previously running a CentOS ISO.
|
||||
|
||||
.. only:: partner
|
||||
|
||||
.. include:: /_includes/debian-rn-link-a90a7e432679.rest
|
||||
|
||||
- BIOS configured with Intel Virtualization (VTD, VTX)
|
||||
|
||||
- Disabled for controller-only servers and storage servers.
|
||||
|
||||
- Enabled for :hideable:`controller+worker (All-in-one) servers and` worker servers.
|
||||
|
||||
- The servers are powered off.
|
||||
|
||||
|
||||
.. end-prepare-servers-common
|
||||
|
||||
|
||||
.. ........
|
||||
.. HW requirments for Worker nodes
|
||||
.. ........
|
||||
|
||||
.. begin-worker-hw-reqs
|
||||
|
||||
.. list-table:: Worker Hardware Requirements
|
||||
:widths: 6 25
|
||||
:header-rows: 0
|
||||
|
||||
* - Minimum number of workers
|
||||
- 2
|
||||
* - Maximum number of workers
|
||||
- |max-workers|
|
||||
* - Minimum processor class
|
||||
- Same as for controllers
|
||||
* - Minimum memory
|
||||
- 32 GB
|
||||
* - Minimum Primary Disk (two-disk hardware RAID suggested)
|
||||
- 120 GB (min. 10K RPM)
|
||||
|
||||
.. note:: Installation on software RAID is not supported.
|
||||
* - Additional disks
|
||||
- 500 GB (min. 10K RPM) - 1 or more
|
||||
|
||||
.. note::
|
||||
|
||||
Single-disk hosts are supported, but must not be used for local
|
||||
ephemeral storage.
|
||||
* - Network ports
|
||||
|
||||
(Typical deployment)
|
||||
- * Mgmt and Cluster Host: 2 x 10GE LAG (shared interface)
|
||||
* **Optional** external network ports 2 x 10GE LAG
|
||||
* - Board Management Controller (BMC)
|
||||
- 1 (required)
|
||||
* - Bios settings
|
||||
- * Boot order: HD, PXE
|
||||
|
||||
* Bios mode: BIOS or UEFI
|
||||
|
||||
.. note::
|
||||
|
||||
|UEFI| Secure Boot and |UEFI| |PXE| boot over IPv6 are not
|
||||
supported. On systems with an IPv6 management network, you can use a
|
||||
separate IPv4 network for |PXE| boot.
|
||||
* Hyperthreading: Same as for controllers
|
||||
* Power profile: Same as for controllers
|
||||
* Intel Virtualization (VTD, VTX): Enabled
|
||||
|
||||
.. end-worker-hw-reqs
|
||||
|
||||
|
||||
.. ........
|
||||
.. HW requirments for Storage nodes
|
||||
.. ........
|
||||
|
||||
.. begin-storage-hw-reqs
|
||||
|
||||
.. list-table:: Storage Hardware Requirements
|
||||
:widths: 6 25
|
||||
:header-rows: 0
|
||||
|
||||
* - Minimum number of nodes
|
||||
|
||||
(If Ceph storage is used)
|
||||
- * 2 - 8 (for replication factor 2)
|
||||
* 3 - 9 (for replication factor 3)
|
||||
* - Minimum processor class
|
||||
- Same as for controllers
|
||||
* - Minimum memory
|
||||
- Same as for controllers
|
||||
* - Minimum Primary Disk (two-disk hardware RAID suggested)
|
||||
- 120 GB (min. 10K RPM)
|
||||
|
||||
.. note:: Installation on software RAID is not supported.
|
||||
* - Additional disks
|
||||
- * 500 GB (min. 10K RPM) for OSD storage
|
||||
* One or more |SSDs| or |NVMe| drives (recommended for Ceph journals);
|
||||
min. 1024 MiB per journal.
|
||||
* - Network ports
|
||||
|
||||
(Typical deployment)
|
||||
- * Mgmt and Cluster Host: 2 x 10GE LAG (shared interface)
|
||||
* - Board Management Controller (BMC)
|
||||
- 1 (required)
|
||||
* - Bios settings
|
||||
- * Boot order: HD, PXE
|
||||
* Bios mode: BIOS or UEFI
|
||||
|
||||
.. note::
|
||||
|
||||
|UEFI| Secure Boot and |UEFI| |PXE| boot over IPv6 are not
|
||||
supported. On systems with an IPv6 management network, you can use a
|
||||
separate IPv4 network for |PXE| boot.
|
||||
* Hyperthreading: Same as for controllers
|
||||
* Power profile: Same as for controllers
|
||||
* Intel Virtualization (VTD, VTX): Disabled
|
||||
|
||||
.. end-storage-hw-reqs
|
||||
|
||||
.. ........
|
||||
.. Prepare Servers for Installation
|
||||
.. ........
|
||||
|
||||
.. begin-prep-servers-common
|
||||
.. begin-prepare-servers
|
||||
|
||||
Prior to starting the |prod| installation, the servers must be in the following
|
||||
state:
|
||||
|
||||
- Physically installed.
|
||||
|
||||
- Cabled for power.
|
||||
|
||||
- Cabled for networking.
|
||||
|
||||
Far-end switch ports should be properly configured to realize the networking
|
||||
shown in :ref:`deployment-options` for the particular deployment configuration
|
||||
you are installing.
|
||||
|
||||
- All disks are wiped.
|
||||
|
||||
This ensures that servers will boot from either the network or USB storage,
|
||||
if present.
|
||||
|
||||
.. note::
|
||||
|
||||
The disks and disk partitions need to be wiped before the install.
|
||||
Installing a Debian ISO may fail with a message that the system is in
|
||||
emergency mode if the disks and disk partitions are not completely wiped
|
||||
before the install, especially if the server was previously running a
|
||||
CentOS ISO.
|
||||
|
||||
.. only:: partner
|
||||
|
||||
.. include:: /_includes/debian-rn-link-a90a7e432679.rest
|
||||
|
||||
- BIOS configured with Intel Virtualization (VTD, VTX)
|
||||
|
||||
- Disabled for controller-only servers and storage servers.
|
||||
|
||||
- Enabled for controller+worker (All-in-one) servers and worker servers.
|
||||
|
||||
- The servers are powered off.
|
||||
|
||||
.. end-prepare-servers
|
||||
.. end-prep-servers-common
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 96 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 109 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 101 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 70 KiB |
1
doc/source/shared/roles.txt
Normal file
1
doc/source/shared/roles.txt
Normal file
@ -0,0 +1 @@
|
||||
.. role:: hideable
|
||||
@ -13,6 +13,8 @@
|
||||
.. Load scoped product information
|
||||
.. include:: /_this.txt
|
||||
|
||||
.. Load custom roles
|
||||
.. include:: /shared/roles.txt
|
||||
|
||||
.. Task-oriented headings that should not appear in TOC
|
||||
.. These are used with the .. rubric:: directive. For example:
|
||||
@ -51,4 +53,16 @@
|
||||
|
||||
|
|
||||
|
||||
.. Supress substring on per-page basis. Use in conjuction with
|
||||
.. :hideable:`don't show this` text.
|
||||
|
||||
.. |hideable| raw:: html
|
||||
|
||||
<style>
|
||||
.hideable {
|
||||
display:none;
|
||||
}
|
||||
</style>
|
||||
|
||||
|
||||
.. |optional| replace:: **Optional step:**
|
||||
|
||||
Loading…
Reference in New Issue
Block a user