Juanita-Balaraj 63cd4f5fdc CephFS RWX Support in Host-based Ceph

Incorporated patchset 1 review comments
Updated patchset 5 review comments
Updated patchset 6 review comments
Fixed merge conflicts
Updated patchset 8 review comments

Change-Id: Icd7b08ab69273f6073b960a13cf59905532f851a
Signed-off-by: Juanita-Balaraj <juanita.balaraj@windriver.com>

2021-05-03 16:39:45 -04:00

81 KiB

Executable File

Raw Blame History

OpenStack Verified Commercial Hardware

Verified and approved hardware components for use with are listed here.

Table 1. Verified Components
Component	Approved Hardware
Hardware Platforms	Hewlett Packard Enterprise HPE ProLiant DL360p Gen8 Server HPE ProLiant DL360p Gen9 Server HPE ProLiant DL360 Gen10 Server HPE ProLiant DL380p Gen8 Server HPE ProLiant DL380p Gen9 Server HPE ProLiant ML350 Gen10 Server c7000 Enclosure with HPE ProLiant BL460 Gen9 Server Caution LAG support is dependent on the switch cards deployed with the c7000 enclosure. To determine whether LAG can be configured, consult the switch card documentation. Dell Dell PowerEdge R430 Dell PowerEdge R630 Dell PowerEdge R640 Dell PowerEdge R720 Dell PowerEdge R730 Dell PowerEdge R740 Kontron Symkloud MS2920 Note The Kontron platform does not support power ON/OFF or reset through the BMC interface on the platform. As a result, it is not possible for the system to properly fence a node in the event of a management network isolation event. In order to mitigate this, hosted application auto recovery needs to be disabled.
Supported Reference Platforms	Intel Iron Pass Intel Canoe Pass Intel Grizzly Pass Intel Wildcat Pass Intel Wolf Pass
Disk Controllers	Dell PERC H310 Mini PERC H730 Mini PERC H740P PERC H330 PERC HBA330 HPE Smart Array P440ar P420i P408i-a P816i-a LSI 2308 LSI 3008
NICs Verified for PXE Boot, Management, and OAM Networks	Intel I210 (Springville) 1G Intel I350 (Powerville) 1G Intel 82599 (Niantic) 10G Intel X540 10G Intel X710/XL710 (Fortville) 10G Intel X722 (Fortville) 10G Emulex XE102 10G Broadcom BCM5719 1G Broadcom BCM57810 10G Mellanox MT27710 Family (ConnectX-4 Lx) 10G/25G Mellanox MT27700 Family (ConnectX-4) 40G
NICs Verified for Data Interfaces	The following NICs are supported: Intel I350 (Powerville) 1G Intel 82599 (Niantic) 10G Intel X710/XL710 (Fortville) 10 G Intel X552 (Xeon-D) 10G Mellanox Technologies MT27710 Family (ConnectX-4) 10G/25G MT27700 Family (ConnectX-4) 40G
PCI passthrough or PCI SR-IOV NICs	Intel 82599 (Niantic) 10 G Intel X710/XL710 (Fortville) 10G Mellanox Technologies MT27500 Family (ConnectX-3) 10G (support for PCI passthrough only) Note Support for Mellanox CX3 is deprecated in Release 5 and scheduled for removal in Release 6 MT27710 Family (ConnectX-4) 10G/25G MT27700 Family (ConnectX-4) 40G Note For a Mellanox CX3 using PCI passthrough or a CX4 using PCI passthrough or SR-IOV, SR-IOV must be enabled in the CX3/CX4 firmware. For more information, see How To Configure SR-IOV for ConnectX-3 with KVM (Ethernet): Enable SR-IOV on the Firmware. Note The maximum number of VFs per hosted application instance, across all PCI devices, is 32. For example, a hardware encryption hosted application can be launched with virtio interfaces and 32 QAT VFs. However, a hardware encryption hosted application with an SR-IOV network interface (with 1 VF) can only be launched with 31 VFs. Note Dual-use configuration (PCI passthrough or PCI SR-IOV on the same interface) is supported for Fortville NICs only.
PCI SR-IOV Hardware Accelerators	Intel AV-ICE02 VPN Acceleration Card, based on the Intel Coleto Creek 8925/8950, and C62x device with QuickAssist Technology.
GPUs Verified for PCI Passthrough	NVIDIA Corporation: VGA compatible controller - GM204GL (Tesla M60 rev a1)
Board Management Controllers	HPE iLO3 HPE iLO4 Quanta

Kubernetes Verified Commercial Hardware <verified-commercial-hardware>

81 KiB Executable File Raw Blame History

OpenStack Verified Commercial Hardware

81 KiB

Executable File

Raw Blame History