Updates for patchset 2 review comments Changed link depth of main Planning index and added some narrative guidance Added planning/openstack as sibling of planning/kubernetes Related additions to abbrevs.txt Added max-workers substitution to accomodate StarlingX/vendor variants Signed-off-by: Ron Stone <ronald.stone@windriver.com> Change-Id: Ibff9af74ab3f2c00958eff0e33c91465f1dab6b4 Signed-off-by: Stone <ronald.stone@windriver.com>
		
			
				
	
	
		
			55 lines
		
	
	
		
			2.0 KiB
		
	
	
	
		
			ReStructuredText
		
	
	
		
			Executable File
		
	
	
	
	
			
		
		
	
	
			55 lines
		
	
	
		
			2.0 KiB
		
	
	
	
		
			ReStructuredText
		
	
	
		
			Executable File
		
	
	
	
	
 | 
						|
.. osh1552670597082
 | 
						|
.. _multicast-subnets-for-the-management-network:
 | 
						|
 | 
						|
============================================
 | 
						|
Multicast Subnets for the Management Network
 | 
						|
============================================
 | 
						|
 | 
						|
A multicast subnet specifies the range of addresses that the system can use for
 | 
						|
multicast messaging on the network. You can use this subnet to prevent
 | 
						|
multicast leaks in multi-region environments. Addresses for the affected
 | 
						|
services are allocated automatically from the subnet.
 | 
						|
 | 
						|
The requirements for multicast subnets are as follows:
 | 
						|
 | 
						|
 | 
						|
.. _multicast-subnets-for-the-management-network-ul-ubf-ytc-b1b:
 | 
						|
 | 
						|
-   IP multicast addresses must be in the range of 224.0.0.0 through
 | 
						|
    239.255.255.255
 | 
						|
 | 
						|
    For IPv6, the recommended range is ffx5::/16.
 | 
						|
 | 
						|
-   IP multicast address ranges for a particular region must not conflict or
 | 
						|
    overlap with the IP multicast address ranges of other regions.
 | 
						|
 | 
						|
-   IP multicast address ranges must not conflict or overlap with the
 | 
						|
    well-known multicast addresses listed at:
 | 
						|
 | 
						|
    `https://en.wikipedia.org/wiki/Multicast_address
 | 
						|
    <https://en.wikipedia.org/wiki/Multicast_address>`__
 | 
						|
 | 
						|
-   IP multicast addresses must be unique within the network.
 | 
						|
 | 
						|
-   The lower 23-bits of the IP multicast address, used to construct the
 | 
						|
    multicast MAC address, must be unique within the network.
 | 
						|
 | 
						|
-   When interfaces of different regions are on the same L2 network / IP
 | 
						|
    subnet, a separate multicast subnet is required for each region.
 | 
						|
 | 
						|
-   The minimum multicast network range is 16 host entries.
 | 
						|
 | 
						|
 | 
						|
.. note::
 | 
						|
    Addresses used within the IP multicast address range apply to services
 | 
						|
    using IP multicast, not to hosts.
 | 
						|
 | 
						|
.. warning::
 | 
						|
    |ToR| switches with snooping enabled on this network segment require a
 | 
						|
    |IGMP|/|MLD| querier on that network to prevent nodes from being dropped
 | 
						|
    from the multicast group.
 | 
						|
 | 
						|
The default setting for the multicast subnet is 239.1.1.0/28. The default for
 | 
						|
IPv6 is ff05::14:1:1:0/124.
 |