Based on sphinx spellchecker testing/refinement. Signed-off-by: Ron Stone <ronald.stone@windriver.com> Change-Id: Ibfe9b6d7bc8bf044a7fff0ac7e362e4067b17989
		
			
				
	
	
	
		
			74 KiB
		
	
	
	
	
		
			Executable File
		
	
	
	
	
			
		
		
	
	Hardware Requirements
has been tested to work with specific hardware configurations.
If the minimum hardware requirements are not met, system performance cannot be guaranteed.
See StarlingX Hardware Requirements <starlingx-hardware-requirements>
to review the Kubernetes hardware requirements. In the table below, only
the Interface sections are modified for .
Controller, Compute, and Storage Hosts
Combined Controller-Compute Hosts
Hardware requirements for a Simplex or Duplex configuration are listed in the following table.
See StarlingX Hardware Requirements <starlingx-hardware-requirements>
to review the Kubernetes hardware requirements. In the table below, only
the Interface sections are modified for .
Interface Configuration Scenarios
supports the use of consolidated interfaces for the management, cluster host and networks. Some typical configurations are shown in the following table. For best performance, recommends dedicated interfaces.
is optional in all instances.
| Scenario | Controller | Storage | Compute | 
|---|---|---|---|
  | 
2x 10GE LAG: 
 2x 1GE LAG: 
  | 
2x 10GE LAG: 
  | 
2x 10GE LAG: 
 2x 10GE LAG 
 [ … more data interfaces … ]  | 
  | 
2x 1GE LAG: 
 2x 1GE LAG: 
  | 
2x 1GE LAG 
 2x 1GE LAG: 
  | 
2x 1GE LAG 
 2x 1GE LAG: 
 2x 10GE LAG: 
 [ … more data interfaces … ]  |