ecae991cca
Organized SysConf Kubernetes and OpenStack content into subdirs and modified index along lines of Planning layout. Signed-off-by: Stone <ronald.stone@windriver.com> Change-Id: Ia17c015b2083a39fcae4ac545fa10cb5445b4cb2
74 lines
2.3 KiB
ReStructuredText
74 lines
2.3 KiB
ReStructuredText
|
|
.. egs1552672694354
|
|
.. _converting-a-duplex-system-to-switch-based-connection:
|
|
|
|
==================================================
|
|
Convert a Duplex System to Switch-Based Connection
|
|
==================================================
|
|
|
|
On a |prod| |AIO| Duplex system configured to use direct connections for
|
|
the management and cluster host networks, you can convert to switch-based
|
|
connections.
|
|
|
|
The connection type is initially configured at installation. You can change
|
|
it at any time. You must use the CLI to make the change.
|
|
|
|
.. xbooklink For more about the available connection modes,
|
|
see |planning-doc|: `Networks for a Duplex System <networks-for-a-starlingx-duplex-system>`.
|
|
|
|
.. rubric:: |prereq|
|
|
|
|
Extra network cables are required to connect both controllers to the |ToR|
|
|
switch.
|
|
|
|
The |ToR| switch must be configured correctly for communication with the
|
|
controllers.
|
|
|
|
.. rubric:: |proc|
|
|
|
|
#. Use the :command:`system modify` command to specify switch-based
|
|
connection \(**duplex**\).
|
|
|
|
.. code-block:: none
|
|
|
|
~(keystone_admin)$ system modify --system_mode=duplex
|
|
|
|
|
|
This raises **Config-out-of-date** alarm messages on both controllers.
|
|
|
|
#. Lock the standby controller.
|
|
|
|
#. Disconnect the management and infrastructure cables from the standby
|
|
controller.
|
|
|
|
This raises **Port failed** and **Interface failed** alarms on the active
|
|
controller for the management and infrastructure interfaces.
|
|
|
|
#. Connect both controllers to the |ToR| switch.
|
|
|
|
Connect the existing cables from the active controller to the |ToR| switch.
|
|
Use additional cables to connect the standby controller to the |ToR|
|
|
switch.
|
|
|
|
Wait for the network interface alarms on the active controller to be
|
|
cleared.
|
|
|
|
#. Unlock the standby controller to update its configuration.
|
|
|
|
Wait for the controller to be reported as **Unlocked**, **Available**,
|
|
and **Online**, and for its **Config-out-of-date** alarm message to be
|
|
cleared.
|
|
|
|
#. Swact the controllers.
|
|
|
|
#. Lock and then unlock the new standby controller to update its
|
|
configuration.
|
|
|
|
Wait for the controller to be reported as **Unlocked**, **Available**,
|
|
and **Online**, and for its **Config-out-of-date** alarm message to be
|
|
cleared.
|
|
|
|
.. rubric:: |result|
|
|
|
|
The system is now reconfigured to use switch-based connections for the
|
|
internal networks. |