root/build-tools/build-iso
Scott Little 97e076b8ab build-iso: prevent use of host yum.conf when processing kickstart rpms
The build host's yum.conf should not be allowed to influence the
iso we compile.

Story: 2002835
Task: 24519
Change-Id: I202ddbbe64d2dafc198fc7055e360f1c4b047bcc
Signed-off-by: Scott Little <scott.little@windriver.com>
2018-08-21 11:26:21 -04:00

743 lines
23 KiB
Bash
Executable File

#!/bin/bash
#
# Copyright (c) 2018 Wind River Systems, Inc.
#
# SPDX-License-Identifier: Apache-2.0
#
# Build the export/bootimage.iso file
#
# This script uses environment variables to determine the source of
# packages, and bundles the packages into a bootable .iso
#
# It starts by building a basic "vanilla CentOS" ISO, and then adds our
# packages to it.
BUILD_ISO_DIR="$(dirname "$(readlink -f "${BASH_SOURCE[0]}" )" )"
source "${BUILD_ISO_DIR}/image-utils.sh"
usage () {
echo ""
echo "Usage: "
echo " build-iso [--auto <mode>] [--file <filename>] "
echo " [--device <device>] [--skip-sign]"
echo " [--sudo|udev]"
echo " --file <bootimage.iso> destination ISO file"
echo " --auto <controller|cpe> Modify kickstart to auto-install controller or cpe"
echo " mode"
echo " --device <sda> Use a different boot/rootds device (default is sda)"
echo " --skip-sign do not add file signature to RPMs"
echo " --sudo Use \"sudo\" command to access EFI image filesystem (default)"
echo " --udev Use udev to access EFI image filesystem"
echo ""
echo " Note that environment variable BUILD_ISO_USE_UDEV=1 will have the same effect"
echo " as the --udev option"
echo ""
}
MY_YUM_CONF=""
STD_REPO_ID="local-std"
RT_REPO_ID="local-rt"
NPROCS=$(nproc)
export MOCK=/usr/bin/mock
CREATEREPO=$(which createrepo_c)
if [ $? -ne 0 ]; then
CREATEREPO="createrepo"
fi
# TEMPORARY: Check for isohybrid now to give a warning about installing pkg
if [ ! -f /usr/bin/isohybrid ]; then
echo "Missing required utility: /usr/bin/isohybrid"
echo "Installation of syslinux is required:"
echo " sudo yum install -y syslinux"
exit 1
fi
function install_pkg_list {
local PKGLIST=$1
if [ "x$PKGLIST" == "x" ]; then
return 1
fi
OLD_PWD=$PWD
echo "Installing packages listed in $PKGLIST and dependancies"
\rm -f $OUTPUT_DIR/dist/report_deps.txt
$CREATEREPO $CGCS_REPO_DIR
$CREATEREPO $CGCS_RT_REPO_DIR
\cp -v $MY_YUM_CONF $OUTPUT_DIR
\cd $OUTPUT_DIST_DIR/isolinux/Packages
$INTERNAL_REPO_ROOT/build-tools/build_iso/cgts_deps.sh --deps=$PKGLIST
if [ $? -ne 0 ]
then
echo "Could not install dependencies"
exit 1
fi
# clean up
echo "Removing local-std yum repo $CGCS_REPO_DIR/repodata"
echo "Removing local-rt yum repo $CGCS_RT_REPO_DIR/repodata"
\cd $OLD_PWD
}
# Generate the report of where all packages come from
function make_report {
local PKGLISTFILES=$@
if [ "x$PKGLISTFILES" == "x" ]; then
return 1
fi
echo "MAKING $REPORT_FILE"
echo "-----------------" >> $REPORT_FILE
echo "ISO REPORT" > $REPORT_FILE
date >> $REPORT_FILE
echo "-----------------" >> $REPORT_FILE
echo " " >> $REPORT_FILE
echo "-----------------" >> $REPORT_FILE
echo "EXPLICIT INCLUDES" >> $REPORT_FILE
echo "-----------------" >> $REPORT_FILE
for PKGLIST in $PKGLISTFILES; do
while read PKG; do
PKG=`echo $PKG | sed "s/#.*//"`;
if [ "${PKG}x" != "x" ]; then
echo $PKG >> $REPORT_FILE
fi
done < $PKGLIST
done
echo " " >> $REPORT_FILE
echo "-----------------" >> $REPORT_FILE
echo " PACKAGES " >> $REPORT_FILE
echo "-----------------" >> $REPORT_FILE
cat $BUILT_REPORT | sort | uniq >> $REPORT_FILE
echo " " >> $REPORT_FILE
echo "-----------------" >> $REPORT_FILE
echo " WARNINGS " >> $REPORT_FILE
echo "-----------------" >> $REPORT_FILE
# Note that the warnings file may have multiple lines for the same
# missing dependency. A sort | uniq solves this so we don't duplicate
# warnings
cat $WARNINGS_REPORT | sort | uniq >> $REPORT_FILE
echo "ISO REPORT: $REPORT_FILE"
}
function init_vars {
#####################################
# Input definitions
# Where all CentOS packages live
# Where essential CentOS (minimal install) packages live
INTERNAL_REPO_ROOT=
STX_DIR=
# Where BSP files live
export BSP_FILES_PATH=
# Where our own packages live
CGCS_REPO_DIR=$MY_WORKSPACE/std/rpmbuild/RPMS
CGCS_RT_REPO_DIR=$MY_WORKSPACE/rt/rpmbuild/RPMS
MY_YUM_CONF=$(create-yum-conf)
if [ $? -ne 0 ]; then
echo "ERROR: create-yum-conf failed"
exit 1
fi
DISTRO_REPO_DIR=$(for d in $(grep baseurl $MY_YUM_CONF | grep file: | awk -F : '{print $2}' | sed 's:///:/:g'); do if [ -d $d/images ]; then echo $d ;fi; done)
#####################################
# Output definitons
# where to put stuff (curent dir unless MY_WORKSPACE defined)
OUTPUT_DIR="$PWD/export"
if [ ! -z "$MY_WORKSPACE" ] && [ -d "$MY_WORKSPACE" ] ; then
OUTPUT_DIR="$MY_WORKSPACE/export"
CGCS_REPO_DIR="$MY_WORKSPACE/std/rpmbuild/RPMS"
CGCS_RT_REPO_DIR="$MY_WORKSPACE/rt/rpmbuild/RPMS"
fi
# Directory in which to populate files to be distributed
if [ $CUMULUS -eq 0 ]; then
OUTPUT_DIST_DIR=$OUTPUT_DIR/dist
else
OUTPUT_DIST_DIR=$OUTPUT_DIR/dist-cumulus
fi
# Package disc image
OUTPUT_FILE=$OUTPUT_DIR/$DEST_FILE
# Generate an error if the output file is below this threshold
MINIMUM_EXPECTED_SIZE=500000000
# report variables
REPORT_FILE=$OUTPUT_DIR/report.txt
BUILT_REPORT=$OUTPUT_DIR/local.txt
CLOUD_REPORT=$OUTPUT_DIR/cloud.txt
CLOUD_COMMON_REPORT=$OUTPUT_DIR/cloudcommon.txt
CENTOS_REPORT=$OUTPUT_DIR/centos.txt
EPEL_REPORT=$OUTPUT_DIR/epel.txt
WARNINGS_REPORT=$OUTPUT_DIR/warnings.txt
\rm -f $REPORT_FILE
\rm -f $BUILT_REPORT
\rm -f $CLOUD_REPORT
\rm -f $CLOUD_COMMON_REPORT
\rm -f $CENTOS_REPORT
\rm -f $WARNINGS_REPORT
}
# check input variables
function check_vars {
# Where to store data
printf "Finding cgcs-root\n"
printf " Checking \$MY_REPO (value \"$MY_REPO\")\n"
if [ ! -z "$MY_REPO" ] && [ -d "$MY_REPO" ] ; then
INTERNAL_REPO_ROOT=$MY_REPO
printf " Found!\n"
fi
if [ -z "$INTERNAL_REPO_ROOT" ] ; then
printf " No joy -- checking \$MY_REPO_ROOT_DIR (value \"$MY_REPO_ROOT_DIR\")\n"
if [ ! -z "$MY_REPO_ROOT_DIR" ] && [ -d "$MY_REPO_ROOT_DIR/cgcs-root" ] ; then
INTERNAL_REPO_ROOT=$MY_REPO_ROOT_DIR/cgcs-root
printf " Found!\n"
fi
fi
if [ -z "$INTERNAL_REPO_ROOT" ] ; then
printf " No joy -- checking for \$MY_WORKSPACE/cgcs-root\n"
if [ -d "$MY_WORKSPACE/cgcs-root" ] ; then
INTERNAL_REPO_ROOT=$MY_WORKSPACE/cgcs-root
printf " Found!\n"
fi
fi
if [ -z "$INTERNAL_REPO_ROOT" ] ; then
printf " Error -- could not locate cgcs-root repo.\n"
exit 1
fi
STX_DIR=$INTERNAL_REPO_ROOT/stx
printf "\nChecking that we can access $DISTRO_REPO_DIR\n"
if [ ! -d "$DISTRO_REPO_DIR" ] ; then
printf " Error -- could not access $DISTRO_REPO_DIR\n"
exit 1
fi
if [ ! -e "$DISTRO_REPO_DIR/repodata" ] ; then
printf " Error -- $DISTRO_REPO_DIR is there, but does not seem sane\n"
fi
printf "\nOkay, input looks fine...\n\n"
printf "Creating output directory $OUTPUT_DIST_DIR\n"
if [ $CLEAN_FLAG -eq 1 ]; then
echo " Cleaning..."
if [ -e $OUTPUT_DIST_DIR ] ; then
chmod -R a+w $OUTPUT_DIST_DIR
\rm -rf $OUTPUT_DIST_DIR
fi
if [ -e $OUTPUT_DIST_DIR ] ; then
printf "Error: could not remove old $OUTPUT_DIST_DIR\n"
exit 1
fi
fi
\mkdir -p $OUTPUT_DIST_DIR
if [ ! -d $OUTPUT_DIST_DIR ] ; then
printf "Error: could not create $OUTPUT_DIST_DIR\n"
exit 1
fi
RELEASE_INFO=$STX_DIR/stx-integ/utilities/build-info/release-info.inc
export PLATFORM_RELEASE=$(source $RELEASE_INFO && echo $PLATFORM_RELEASE)
# Where BSP files live
export BSP_FILES_PATH="$STX_DIR/stx-metal/bsp-files"
echo " Done"
echo ""
}
function init_output_dir {
echo "Creating base output directory in $OUTPUT_DIST_DIR"
\mkdir -p $OUTPUT_DIST_DIR/isolinux/images
\mkdir -p $OUTPUT_DIST_DIR/isolinux/ks
\mkdir -p $OUTPUT_DIST_DIR/isolinux/LiveOS
\mkdir -p $OUTPUT_DIST_DIR/isolinux/Packages
\mkdir -p $OUTPUT_DIST_DIR/utils
\mkdir -p $OUTPUT_DIST_DIR/isolinux/EFI
# This directory will contains files required for the PXE network installer
\mkdir -p $OUTPUT_DIST_DIR/isolinux/pxeboot
echo " Preparing package lists"
image_inc_list iso std centos > "${PKGLIST_TI}"
image_inc_list iso dev centos > "${PKGLIST_DEV}"
echo " Copying base files"
# Generate .discinfo file
date +%s.%N > $OUTPUT_DIST_DIR/isolinux/.discinfo
echo $PLATFORM_RELEASE >> $OUTPUT_DIST_DIR/isolinux/.discinfo
echo "x86_64" >> $OUTPUT_DIST_DIR/isolinux/.discinfo
\cp -L -ru $DISTRO_REPO_DIR/isolinux/* $OUTPUT_DIST_DIR/isolinux/
\cp -L -ru $DISTRO_REPO_DIR/images/pxeboot $OUTPUT_DIST_DIR/isolinux/images/
echo " Installing startup files"
\cp -L "$BSP_FILES_PATH/centos.syslinux.cfg" "$OUTPUT_DIST_DIR/isolinux/syslinux.cfg"
\cp -L "$BSP_FILES_PATH/centos.syslinux.cfg" "$OUTPUT_DIST_DIR/isolinux/isolinux.cfg"
sed -i 's/wr_usb_boot/oe_iso_boot/' $OUTPUT_DIST_DIR/isolinux/isolinux.cfg
# Modify the isolinux.cfg to auto install if requested
# Option 0 is Controller(serial). Option 2 is CPE serial.
if [ "$AUTO_INSTALL" == "controller" ] ; then
echo "Modifying ISO to auto-install controller load"
perl -p -i -e 's/timeout 0/timeout 1\ndefault 0/' $OUTPUT_DIST_DIR/isolinux/isolinux.cfg
elif [ "$AUTO_INSTALL" == "cpe" ] ; then
echo "Modifying ISO to auto-install CPE (combined load)"
perl -p -i -e 's/timeout 0/timeout 1\ndefault 2/' $OUTPUT_DIST_DIR/isolinux/isolinux.cfg
fi
# Modify the device if requested
if [ ! -z "$DEVICE" ] ; then
echo "Modifying ISO to use device $DEVICE"
perl -p -i -e "s/device=sda/device=${DEVICE}/g" $OUTPUT_DIST_DIR/isolinux/isolinux.cfg
fi
# Copy UEFI files
\cp -L -ru $DISTRO_REPO_DIR/EFI/* $OUTPUT_DIST_DIR/isolinux/EFI/
\cp -L "$BSP_FILES_PATH/grub.cfg" "$OUTPUT_DIST_DIR/isolinux/EFI/BOOT/grub.cfg"
\cp -L "$BSP_FILES_PATH/pxeboot_grub.cfg" "$OUTPUT_DIST_DIR/isolinux/pxeboot/pxeboot_grub.cfg"
# Update the efiboot.img (See https://wiki.archlinux.org/index.php/Remastering_the_Install_ISO)
# We need to mount the image file, replace the grub.cfg file with the Titanium Cloud one, and unmount.
# Script update-efiboot-image will do this. If there is not loop device on the build machine
# then this script must be executed manually prior.
if [ ! -e "/dev/loop-control" -a ! -f "$OUTPUT_DIR/efiboot.img" ]; then
CMD="export PROJECT=$PROJECT; \
export SRC_BUILD_ENVIRONMENT=$SRC_BUILD_ENVIRONMENT; \
export MY_BUILD_ENVIRONMENT=$MY_BUILD_ENVIRONMENT; \
export MY_BUILD_ENVIRONMENT_FILE=$MY_BUILD_ENVIRONMENT_FILE; \
export MY_BUILD_DIR=$MY_BUILD_DIR; \
export MY_WORKSPACE=$MY_WORKSPACE; \
export MY_REPO=$MY_REPO; \
export MY_BUILD_CFG=$MY_BUILD_CFG; \
export MY_MOCK_ROOT=$MY_MOCK_ROOT; \
export PATH=$MY_REPO/build-tools:\$PATH; \
export BUILD_ISO_USE_UDEV=$BUILD_ISO_USE_UDEV; \
export BSP_FILES_PATH=$BSP_FILES_PATH; \
update-efiboot-image"
echo $CMD
if [ "$HOSTNAME" == "yow-cgts3-centos7" ]; then
echo "Attempting to run update-efiboot-image on yow-cgts3-lx"
ssh -o StrictHostKeyChecking=no yow-cgts3-lx "$CMD"
if [ $? -ne 0 ]; then
echo "Failed to run update-efiboot-image on yow-cgts3-lx"
fi
fi
if [ "$HOSTNAME" == "yow-cgts2-centos7" ]; then
echo "Attempting to run update-efiboot-image on yow-cgts2-lx"
ssh -o StrictHostKeyChecking=no yow-cgts2-lx "$CMD"
if [ $? -ne 0 ]; then
echo "Failed to run update-efiboot-image on yow-cgts2-lx"
fi
fi
fi
if [ ! -e "/dev/loop-control" -a ! -f "$OUTPUT_DIR/efiboot.img" ]; then
printf "\n**************************************************************************************************** \n"
printf "No loop device on this machine. Please ensure $OUTPUT_DIR/efiboot.img \n"
printf "exist prior to executing build-iso by. It can be created by running \n"
printf " $INTERNAL_REPO_ROOT/build-tools/update-efiboot-image \n"
printf "on a machine that does support a loop device. Please ensure all standard \n"
printf "build environment variables are defined (e.g. MY_REPO, MY_WORKSPACE, etc.). \n"
printf " \n"
printf "e.g. If building on yow-cgts3-centos7, you'll want to run the script on \n"
printf " yow-cgts3-lx which shares the same file system, but supports loop devices \n"
printf "****************************************************************************************************** \n"
exit 1
fi
if [ -f "$OUTPUT_DIR/efiboot.img" ]; then
# The script update-efiboot-image was run outside the build-iso script, do nothing.
printf " The image file $OUTPUT_DIR/efiboot.img already exists\n"
else
printf " The image file $OUTPUT_DIR/efiboot.img does not exist \n"
if [ ! -f "$INTERNAL_REPO_ROOT/build-tools/update-efiboot-image" ]; then
printf "*** Error: script update-efiboot-image does not exist *** \n"
exit 1
fi
# Run the script
BUILD_ISO_USE_UDEV=$BUILD_ISO_USE_UDEV $INTERNAL_REPO_ROOT/build-tools/update-efiboot-image
RET=$?
if [ $RET != 0 ]; then
printf "*** Error: update-efiboot-image script returned failure $RET *** \n"
exit 1
fi
fi
\cp -L $OUTPUT_DIR/efiboot.img $OUTPUT_DIST_DIR/isolinux/images/
\rm -f $OUTPUT_DIR/efiboot.img
# Copy and set up pxeboot setup files
\cp "$BSP_FILES_PATH/pxeboot_setup.sh" "$OUTPUT_DIST_DIR/isolinux/pxeboot_setup.sh"
\cp "$BSP_FILES_PATH/pxeboot.cfg" "$OUTPUT_DIST_DIR/isolinux/pxeboot/pxeboot.cfg"
chmod +x $OUTPUT_DIST_DIR/isolinux/pxeboot_setup.sh
\rm -f $OUTPUT_DIST_DIR/comps.xml
\cp -L $INTERNAL_REPO_ROOT/build-tools/build_iso/comps.xml.gz $OUTPUT_DIST_DIR/
gunzip $OUTPUT_DIST_DIR/comps.xml.gz
TMP_DIR=$MY_WORKSPACE/tmp
\mkdir -p $TMP_DIR
TMPDIR=$TMP_DIR yum clean all -c $MY_YUM_CONF
\rm -rf $TMP_DIR/yum-$USER-*
echo " Done"
echo ""
}
function final_touches {
OLD_PWD=$PWD
# Update the comps.xml
if [ ! -f $OUTPUT_DIST_DIR/comps.xml.bak ]; then
\cp $OUTPUT_DIST_DIR/comps.xml $OUTPUT_DIST_DIR/comps.xml.bak
fi
python "$BSP_FILES_PATH/platform_comps.py" \
--pkgdir "$OUTPUT_DIST_DIR/isolinux/Packages" \
--groups "$OUTPUT_DIST_DIR/comps.xml"
if [ $? -ne 0 ]; then
echo "Failed to update comps.xml"
exit 1
fi
# create the repo
\cd $OUTPUT_DIST_DIR/isolinux
$CREATEREPO -q -g ../comps.xml .
# build the ISO
printf "Building image $OUTPUT_FILE\n"
\cd $OUTPUT_DIST_DIR
chmod 664 isolinux/isolinux.bin
mkisofs -o $OUTPUT_FILE \
-R -D -A 'oe_iso_boot' -V 'oe_iso_boot' \
-quiet \
-b isolinux.bin -c boot.cat -no-emul-boot \
-boot-load-size 4 -boot-info-table \
-eltorito-alt-boot \
-e images/efiboot.img \
-no-emul-boot \
isolinux/
isohybrid --uefi $OUTPUT_FILE
implantisomd5 $OUTPUT_FILE
\cd $OLD_PWD
}
function extract_pkg_from_local_repo {
local yum_conf=$1
local repoid=$2
local pkgname=$3
local pkgfile=$(repoquery --config=${yum_conf} --repoid=${repoid} --location -q ${pkgname})
if [ -z "${pkgfile}" ]; then
echo "Could not find package $pkgname in $repodir"
exit 1
fi
rpm2cpio ${pkgfile/file://} | cpio -idmv
if [ $? -ne 0 ]; then
echo "Failed to extract files from ${pkgfile/file://}"
exit 1
fi
}
function extract_installer_files {
# Changes to copied files here must also be reflected in patch-iso
PKGDIR=$OUTPUT_DIST_DIR/isolinux/Packages
(
\cd $OUTPUT_DIR
\rm -rf kickstarts extra_cfgs kickstart.work
\mkdir kickstarts extra_cfgs kickstart.work
echo "Retrieving kickstarts..."
\cd kickstart.work
extract_pkg_from_local_repo ${MY_YUM_CONF} ${STD_REPO_ID} platform-kickstarts
extract_pkg_from_local_repo ${MY_YUM_CONF} ${STD_REPO_ID} platform-kickstarts-pxeboot
extract_pkg_from_local_repo ${MY_YUM_CONF} ${STD_REPO_ID} platform-kickstarts-extracfgs
\cp --preserve=all www/pages/feed/rel-*/*.cfg pxeboot/*.cfg ../kickstarts/ &&
\cp --preserve=all extra_cfgs/*.cfg ../extra_cfgs/
if [ $? -ne 0 ]; then
echo "Failed to copy extracted kickstarts"
exit 1
fi
\cd ..
# Copy kickstarts to ISO
\cp --preserve=all kickstarts/controller_ks.cfg $OUTPUT_DIST_DIR/isolinux/ks.cfg
# Modify the kickstart to shutdown instead of reboot if doing an auto install
if [ ! -z "$AUTO_INSTALL" ] ; then
sed -i 's/^reboot --eject/shutdown/' $OUTPUT_DIST_DIR/isolinux/ks.cfg
fi
\mv kickstarts/pxeboot* $OUTPUT_DIST_DIR/isolinux/pxeboot/
\cp --preserve=all kickstarts/* $OUTPUT_DIST_DIR/isolinux
# Update OAM interface for cumulus auto install
if [ $CUMULUS -eq 1 ]; then
# Cumulus wants tty1
perl -p -i -e 's/console=tty0/console=tty1/' $OUTPUT_DIST_DIR/isolinux/isolinux.cfg
# CUMULUS setup scripts specify ens3 for OAM
OAM_IFNAME=ens3
cat <<EOM >> $OUTPUT_DIST_DIR/isolinux/ks.cfg
%post
#For cumulus tis on tis automated install
cat << EOF > /etc/sysconfig/network-scripts/ifcfg-${OAM_IFNAME}
IPADDR=10.10.10.3
NETMASK=255.255.255.0
BOOTPROTO=static
ONBOOT=yes
DEVICE=${OAM_IFNAME}
MTU=1500
GATEWAY=10.10.10.1
EOF
%end
EOM
fi
# For PXE boot network installer
echo ${OUTPUT_DIST_DIR}/isolinux/Packages
local WORKDIR=pxe-network-installer.content
local ORIG_PWD=$PWD
\rm -rf $WORKDIR
\mkdir $WORKDIR
\cd $WORKDIR
extract_pkg_from_local_repo ${MY_YUM_CONF} ${STD_REPO_ID} pxe-network-installer
extract_pkg_from_local_repo ${MY_YUM_CONF} ${STD_REPO_ID} grub2-efi-x64-pxeboot
extract_pkg_from_local_repo ${MY_YUM_CONF} ${STD_REPO_ID} grub2-efi-x64-modules
\mkdir -p $OUTPUT_DIST_DIR/isolinux/pxeboot/EFI/centos/x86_64-efi
\cp --preserve=all pxeboot/pxelinux.0 pxeboot/menu.c32 pxeboot/chain.c32 $OUTPUT_DIST_DIR/isolinux/pxeboot &&
\cp --preserve=all usr/lib/grub/x86_64-efi/* $OUTPUT_DIST_DIR/isolinux/pxeboot/EFI/centos/x86_64-efi/ &&
\cp --preserve=all pxeboot/EFI/grubx64.efi $OUTPUT_DIST_DIR/isolinux/pxeboot/EFI/
if [ $? -ne 0 ]; then
echo "Error: Could not copy all files from installer"
exit 1
fi
\cp --preserve=all www/pages/feed/rel-*/LiveOS/squashfs.img $OUTPUT_DIST_DIR/isolinux/LiveOS
if [ $? -ne 0 ]; then
echo "Error: Could not copy squashfs from LiveOS"
exit 1
fi
# Replace vmlinuz and initrd.img with our own pre-built ones
\rm -f \
$OUTPUT_DIST_DIR/isolinux/vmlinuz \
$OUTPUT_DIST_DIR/isolinux/images/pxeboot/vmlinuz \
$OUTPUT_DIST_DIR/isolinux/initrd.img \
$OUTPUT_DIST_DIR/isolinux/images/pxeboot/initrd.img
\cp --preserve=all pxeboot/rel-*/installer-bzImage_1.0 \
$OUTPUT_DIST_DIR/isolinux/vmlinuz &&
\cp --preserve=all pxeboot/rel-*/installer-bzImage_1.0 \
$OUTPUT_DIST_DIR/isolinux/images/pxeboot/vmlinuz &&
\cp --preserve=all pxeboot/rel-*/installer-intel-x86-64-initrd_1.0 \
$OUTPUT_DIST_DIR/isolinux/initrd.img &&
\cp --preserve=all pxeboot/rel-*/installer-intel-x86-64-initrd_1.0 \
$OUTPUT_DIST_DIR/isolinux/images/pxeboot/initrd.img
if [ $? -ne 0 ]; then
echo "Error: Failed to copy installer images"
exit 1
fi
\cd $ORIG_PWD
\rm -rf $WORKDIR
)
if [ $? -ne 0 ]; then
exit 1
fi
}
function setup_upgrades_files {
# Changes to copied files here must also be reflected in patch-iso
# Copy the upgrade files
UPGRADES_DIR="$OUTPUT_DIST_DIR/isolinux/upgrades"
\rm -rf $UPGRADES_DIR
\mkdir -p $UPGRADES_DIR
\cp "$BSP_FILES_PATH/bsp-files/upgrades/*" "$UPGRADES_DIR"
sed -i "s/xxxSW_VERSIONxxx/${PLATFORM_RELEASE}/g" $UPGRADES_DIR/metadata.xml
chmod +x $UPGRADES_DIR/*.sh
# Write the version out (used in upgrade scripts - this is the same as SW_VERSION)
echo "VERSION=$PLATFORM_RELEASE" > $UPGRADES_DIR/version
}
function sign_iso {
# Sign the .iso with the developer private key
# Sigining with the formal key is only to be done for customer release
# builds
local isofilename=$(basename $OUTPUT_DIR/$DEST_FILE)
local isofilenoext="${isofilename%.*}"
openssl dgst -sha256 -sign ${MY_REPO}/build-tools/signing/dev-private-key.pem -binary -out $OUTPUT_DIR/$isofilenoext.sig $OUTPUT_DIR/$DEST_FILE
}
#############################################
# Main code
#############################################
# Check args
HELP=0
CLEAN_FLAG=1 # TODO -- doesn't yet work without --clean
DEST_FILE=bootimage.iso
AUTO_FLAG=0
AUTO_INSTALL=""
CUMULUS=0
SIGN_RPM_FILES=1
DEVICE=""
if [ -z "$BUILD_ISO_USE_UDEV" ]; then
BUILD_ISO_USE_UDEV=0
fi
# read the options
TEMP=`getopt -o hf:a:d: --long help,file:,auto:,device:,cumulus,clean,skip-sign,sudo,udev -n 'test.sh' -- "$@"`
eval set -- "$TEMP"
# extract options and their arguments into variables.
while true ; do
case "$1" in
-h|--help) HELP=1 ; shift ;;
--clean) CLEAN_FLAG=1 ; shift ;;
--skip-sign) SIGN_RPM_FILES=0 ; shift ;;
--cumulus) CUMULUS=1 ; shift ;;
-f | --file) DEST_FILE="$2"; shift; shift ;;
-d | --device) DEVICE="$2"; shift; shift ;;
-a | --auto) AUTO_FLAG=1; AUTO_INSTALL="$2"; shift; shift ;;
--sudo) BUILD_ISO_USE_UDEV=0 ; shift ;;
--udev) BUILD_ISO_USE_UDEV=1 ; shift ;;
--) shift ; break ;;
*) echo "Internal error!" ; exit 1 ;;
esac
done
if [ $AUTO_FLAG -eq 1 ]; then
if [[ "$AUTO_INSTALL" != "controller" && "$AUTO_INSTALL" != "cpe" ]] ; then
echo "Unsupported --auto value: $AUTO_INSTALL"
exit 1
fi
fi
if [ $HELP -eq 1 ]; then
usage
exit 0
fi
(
printf "\n*************************\n"
printf "Create Titanium Cloud/CentOS Boot CD\n"
printf "*************************\n\n"
# Init variables
init_vars
check_vars
PKGLIST_MINIMAL="${INTERNAL_REPO_ROOT}/build-tools/build_iso/minimal_rpm_list.txt"
PKGLIST_TI="${OUTPUT_DIR}/image.inc"
PKGLIST_DEV="${OUTPUT_DIR}/image-dev.inc"
# Create skeleton build dir
init_output_dir
# Create the vanilla DVD
echo "Copying vanilla CentOS RPMs"
install_pkg_list "${PKGLIST_MINIMAL}"
# Find all CGCS packages
# SAL exit 0
echo "Installing Titanium Cloud packages"
install_pkg_list "${PKGLIST_TI}"
if [ $? -eq 2 ]; then
exit 1
fi
if [ "x${RELEASE_BUILD}" == "x" ]; then
echo "Installing Titanium Cloud developer packages"
install_pkg_list "${PKGLIST_DEV}"
if [ $? -eq 2 ]; then
exit 1
fi
fi
# Extract installer files
extract_installer_files
# Upgrades files
setup_upgrades_files
# add file signatures to all rpms
if [ $SIGN_RPM_FILES -ne 0 ]; then
sign-rpms -d $OUTPUT_DIST_DIR/isolinux/Packages
if [ $? -ne 0 ] ; then
echo "failed to add file signatures to RPMs"
exit 1
fi
fi
# Finalize and build ISO
final_touches
# Sign the ISO
sign_iso
make_report "${PKGLIST_MINIMAL}" "${PKGLIST_TI}"
# Check sanity
FILESIZE=$(wc -c <"$OUTPUT_FILE")
if [ $FILESIZE -ge $MINIMUM_EXPECTED_SIZE ]; then
printf "Done."
printf "Output file: $OUTPUT_FILE\n\n"
else
printf "Output file $OUTPUT_FILE smaller than expected -- probable error\n\n"
exit 1
fi
) 2>&1 | stdbuf -o0 awk '{ print strftime("%H:%M:%S"), $0; fflush(); }' ; exit ${PIPESTATUS[0]}