collectd-openstack-plugins/doc/source/GSG.rst

Getting Started with Collectd

This is a getting started guide that describes the setup of collectd with ceilometer plugin.

Pre-requisites

• Access to the internet
• A working Openstack environment
• Keystone and Ceilometer services enabled

Linux Configuration

Collectd Set-up

Ensure that the binary packages for your Linux distribution are installed and up-to-date.

sudo apt-get install build-essential

Install the libraries that allow the plugins to collect the actual values.

sudo apt-get install flex bison automake pkg-config libtool python-dev

Clone the source code from the repo.

git clone http://github.com/collectd/collectd

Currently there are two major versions of collectd; Version 4 and version 5. Version 4 is outdated, so version 5 should be used for this setup. Checkout the version 5.6 branch.

cd collectd
git checkout collectd-5.6

Then build this version:

sudo ./build.sh

Once built, configure collectd.

sudo ./configure --enable-syslog --enable-plugin --enable-logfile --enable-debug --prefix=/usr

Now, install collectd.

sudo make -j
sudo make install

Set and Configure Collectd as a Service

To enable collectd as a service on your system copy the .service onto your system. This file is located in the "/collectd/contrib/" directory of the repo.

sudo cp contrib/systemd.collectd.service /lib/systemd/system

Start collectd as a service.

sudo service systemd.collectd start

Check the status of collectd.

sudo service systemd.collectd status

For further information on enabling collectd as a service:

https://collectd.org/wiki/index.php/First_steps#Starting_the_daemon

Installation and Configuration of collectd-ceilometer-plugin

Clone the collectd-ceilometer-plugin code.

git clone https://github.com/openstack/collectd-ceilometer-plugin

By default, the collectd.conf file is located in "/etc/collectd.conf", but because you specified "--prefix=/usr" during configuration it is now located "/usr/etc/collectd.conf".

Configurations for the plugin itself are specified in its own .conf file, collectd-ceilometer-plugin.conf.

Copy collectd-celiometer-plugin/etc/collectd.conf.d/collectd-ceilometer-plugin.conf onto your machine. Include the filepath to this file in your collectd.conf file.

Include /path/to/collectd-ceilometer-plugin.conf

In the collectd-ceilometer-plugin.conf file a few variables have to be changed to suit your environment:

• Set the "ModulePath" to be the location of your collectd-ceilometer-plugin directory.

• You must specify the service endpoint address, "OS_AUTH_URL". In an openstack setup you can use the openstack client to identify this.

  openstack catalog list

  Look for the keystone internalURL to and use it as your "OS_AUTH_URL".

  OS_AUTH_URL "<OS_AUTH_URL>"

• Finally, set the type of URL used for the ceilometer service to "internalURL".

  CEILOMETER_URL_TYPE "internalURL"

• If you would like to enable any additional features please follow the instructions provided in the "Additional Features" section below before moving on to the next step.

Now, you can restart the collectd service and the plugin for ceilometer should be working with collectd.

sudo service systemd.collectd restart

Verification of ceilometer

To verify that ceilometer is working with collectd use the ceilometer client.

• Source the credentials required to use your openstack client.

  source openrc

• To verify that the stats are going through to ceilometer, view the ceilometer meter list.

  ceilometer meter-list

  Specifically, one of the default meters that is enabled by collectd is "cpu.cpu". Check that this meter is enabled.

   ceilometer sample-list --meter cpu.cpu

Additional Features

Customized Units

This feature enables you to customize the units of the data being collected. It can be used to update existing units or add in new units by updating the plugin to unit mappings. If you are creating a new meter by enabling a plugin which doesn't provide its own unit mappings, this feature can be used to add in the new units for this meter.

To utilize this feature you must enable it before restarting the service. Follow the instructions below to implement it:

• In your collectd-ceilometer-plugin.conf file add in the following lines at the end of the <Module> section. Edit the line to include the name of of your chosen meter and its new units.

::

<UNITS>

UNIT <meter_name> <units>

</UNITS>

Additional lines of a similar nature can be added to change the units of multiple meters.

- Now you can restart the collectd service and your customized units will have been updated.

To verify that the units have been changed, observe the ceilometer meter-list or the sample-list and check the units of the meter that you changed.

ceilometer meter-list | grep <meter_name>
ceilometer sample-list | grep <meter_name>

Troubleshooting

If you are unable to verify that ceilometer is working with collectd, try restarting the service, then check the meter list again.

systemctl restart systemd.collectd.service

Then you can also check the status of the service again or for further details you can use the following command.

sudo journalctl -xe

This will allow you to examine any errors that are occuring.

If the plugin still doesn't appear to be working and the collectd service is running correctly without any errors, try enabling the csv plugin. This will allow you to check if collectd is generating any metrics. Enable the csv plugin, restart collectd and check the destination directory for the plugin. This will allow you to check if the plugin is loaded.