1584 lines
53 KiB
Plaintext
1584 lines
53 KiB
Plaintext
-- ==================================================================
|
|
-- Copyright (C) 2002 by HUAWEI TECHNOLOGIES. All rights reserved.
|
|
--
|
|
-- Description: HUAWEI Layer Two Interface Management MIB
|
|
-- Reference:
|
|
-- Version: V1.0
|
|
-- History:
|
|
-- V1.0
|
|
-- ==================================================================
|
|
|
|
HUAWEI-L2IF-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
|
|
hwDatacomm
|
|
FROM HUAWEI-MIB
|
|
|
|
TruthValue,TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
|
|
MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, OBJECT-IDENTITY, NOTIFICATION-TYPE, Counter64
|
|
FROM SNMPv2-SMI
|
|
|
|
ifIndex,InterfaceIndex,ifDescr
|
|
FROM IF-MIB
|
|
|
|
RowStatus
|
|
FROM SNMPv2-TC
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
|
|
VlanIdOrNone, VlanId
|
|
FROM Q-BRIDGE-MIB
|
|
|
|
EnabledStatus
|
|
FROM P-BRIDGE-MIB;
|
|
|
|
hwL2Mgmt OBJECT IDENTIFIER ::= { hwDatacomm 42 }
|
|
|
|
hwL2IfMib MODULE-IDENTITY
|
|
LAST-UPDATED "200505100836Z"
|
|
ORGANIZATION
|
|
"Huawei Technologies co.,Ltd."
|
|
CONTACT-INFO
|
|
"VRP Team Huawei Technologies co.,Ltd.
|
|
Huawei Bld.,NO.3 Xinxi Rd.,
|
|
Shang-Di Information Industry Base,
|
|
Hai-Dian District Beijing P.R. China
|
|
http://www.huawei.com
|
|
Zip:100085
|
|
"
|
|
DESCRIPTION
|
|
"information of layer2 interface and information of hybrid port and
|
|
information of trunk port"
|
|
::= { hwL2Mgmt 1 }
|
|
|
|
|
|
VlanList ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each octet within this value specifies a set of eight
|
|
vlans, with the first octet specifying vlans 0 through
|
|
7, the second octet specifying vlans 8 through 15, etc.
|
|
Within each octet, the most significant bit represents
|
|
the lowest numbered vlan, and the least significant bit
|
|
represents the highest numbered vlan. Thus, each vlan
|
|
of the link is represented by a single bit within the
|
|
value of this object. If that bit has a value of '1'
|
|
then that vlan is included in the set of vlans; the vlan
|
|
is not included if its bit has a value of '0'."
|
|
SYNTAX OCTET STRING
|
|
-- ============================================================================
|
|
|
|
hwL2IfObjects OBJECT IDENTIFIER ::= { hwL2IfMib 1 }
|
|
|
|
hwL2Interface OBJECT IDENTIFIER ::= { hwL2IfObjects 1 }
|
|
|
|
-- ============================================================================
|
|
--
|
|
-- ======================= definition begin ===================================
|
|
--
|
|
-- ============================================================================
|
|
hwL2IfPortMax OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Max ports that this device supports,BRIDGE-MIB have a resemble definition."
|
|
::= { hwL2Interface 1 }
|
|
|
|
hwL2TopologyDetect OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether to enable layer2 topology detection."
|
|
::= { hwL2Interface 2 }
|
|
|
|
|
|
-- ===========================================================================
|
|
-- layer 2 interface group
|
|
-- ===========================================================================
|
|
hwL2IfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwL2IfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is a table of layer2 interface,so it displays some attribute of
|
|
layer2 interface."
|
|
::= { hwL2Interface 3 }
|
|
|
|
|
|
hwL2IfEntry OBJECT-TYPE
|
|
SYNTAX HwL2IfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Entries of extended Huawei private interface information table "
|
|
INDEX { hwL2IfPortNum }
|
|
::= { hwL2IfTable 1}
|
|
|
|
HwL2IfEntry ::=
|
|
SEQUENCE {
|
|
hwL2IfPortNum Integer32,
|
|
hwL2IfPortIfIndex InterfaceIndex,
|
|
hwL2IfPortType INTEGER,
|
|
hwL2IfPVID Integer32,
|
|
hwL2IfIsSrcMacFilter TruthValue,
|
|
hwL2IfMacAddrLearnMode INTEGER,
|
|
hwL2IfMacAddressLearn INTEGER,
|
|
hwL2IfBcastRatio Integer32,
|
|
hwL2IfMcastRatio Integer32,
|
|
hwL2IfUcastRatio Integer32,
|
|
hwL2IfOutBcastRatio Integer32,
|
|
hwL2IfOutMcastRatio Integer32,
|
|
hwL2IfOutUcastRatio Integer32,
|
|
hwL2IfDiscardBcast EnabledStatus,
|
|
hwL2IfDiscardUnknownMcast EnabledStatus,
|
|
hwL2IfDiscardUnknownUcast EnabledStatus,
|
|
hwL2IfBpdu EnabledStatus,
|
|
hwL2IfPortPriority Integer32,
|
|
hwL2IfPortName OCTET STRING,
|
|
hwL2IfInInvalidVlanPkts Counter64,
|
|
hwL2IfFlushEnable EnabledStatus,
|
|
hwL2IfFlushControlVlan Integer32,
|
|
hwL2IfTrustDefaultPriority EnabledStatus,
|
|
hwL2IfOfflineStatus EnabledStatus,
|
|
hwL2IfQinqVlanTransEnable EnabledStatus,
|
|
hwL2IfQinqVlanTransMissDrop INTEGER,
|
|
hwL2IfIpSubnetVlanEnable EnabledStatus,
|
|
hwL2IfMacVlanEnable EnabledStatus,
|
|
hwL2IfPolicyVlanEnable EnabledStatus,
|
|
hwL2IfVlanPrecedence Integer32,
|
|
hwL2IfIsolateGroupEnable EnabledStatus
|
|
}
|
|
|
|
|
|
hwL2IfPortNum OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of layer2 interface port, a unique value,
|
|
for each port.It is recommended that values are assigned
|
|
contiguously starting from 1. "
|
|
::= { hwL2IfEntry 1 }
|
|
|
|
hwL2IfPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique value, greater than zero, for each interface or interface
|
|
sub-layer in the managed system. The value is consistent with the
|
|
ifIndex in ifTable of IF-MIB."
|
|
::= { hwL2IfEntry 2 }
|
|
|
|
|
|
|
|
hwL2IfPortType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
invalid(0),
|
|
trunk(1) ,
|
|
access(2) ,
|
|
hybrid(3) ,
|
|
fabric(4),
|
|
qinq(5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Layer2 interface Port type, it contains invalid(0), trunk(1),
|
|
access(2), hybrid(3), fabric(4)and qinq(5).Do not support
|
|
fabric(4) now.invalid(0),which we read only,can't modify."
|
|
::= { hwL2IfEntry 3 }
|
|
|
|
hwL2IfPVID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Layer2 interface Port VLAN ID"
|
|
::= { hwL2IfEntry 4 }
|
|
|
|
hwL2IfIsSrcMacFilter OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Whether to filter source MAC address. We don't support it now."
|
|
::= { hwL2IfEntry 5 }
|
|
|
|
|
|
hwL2IfMacAddrLearnMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
iVL(1),
|
|
sVL(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Status indicates mac address learn mode of the interface.
|
|
IVL(1) means independent VLAN learning.SVL means shared VLAN learning.
|
|
We only support iVL now."
|
|
::= { hwL2IfEntry 6 }
|
|
|
|
hwL2IfMacAddressLearn OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
enabled(1),
|
|
disabled(2),
|
|
discard(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Status indicates if the interface is allowed to learn mac
|
|
address, enable(1) can be setted, (enabled(1) means that
|
|
the interface can learn mac address), otherwise disabled(2)
|
|
can be setted. discard(3) means the interface will drop packets."
|
|
::= { hwL2IfEntry 7 }
|
|
|
|
--suppression step of percentage mode
|
|
hwL2IfBcastRatio OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Broadcast-suppression ratio. Default is 100% . 100% indicates
|
|
that the broadcast isn't suppressed."
|
|
::= { hwL2IfEntry 8 }
|
|
|
|
hwL2IfMcastRatio OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Multicast-suppression ratio.Default is 100%, 100% indicates that
|
|
the multicast isn't suppressed."
|
|
::= { hwL2IfEntry 9 }
|
|
|
|
hwL2IfUcastRatio OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Unicastsuppression ratio. Default is 100% , 100% indicates that
|
|
the broadcast isn't suppressed."
|
|
::= { hwL2IfEntry 10 }
|
|
|
|
hwL2IfOutBcastRatio OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Outbound broadcast-suppression ratio. Default is 100% . 100% indicates
|
|
that the broadcast isn't suppressed."
|
|
::= { hwL2IfEntry 11 }
|
|
|
|
hwL2IfOutMcastRatio OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Outbound multicast-suppression ratio.Default is 100%, 100% indicates that
|
|
the multicast isn't suppressed."
|
|
::= { hwL2IfEntry 12 }
|
|
|
|
hwL2IfOutUcastRatio OBJECT-TYPE
|
|
SYNTAX Integer32 (0..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Outbound unicastsuppression ratio. Default is 100% , 100% indicates that
|
|
the broadcast isn't suppressed."
|
|
::= { hwL2IfEntry 13 }
|
|
|
|
hwL2IfDiscardBcast OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The flag of droping the broadcast packets,
|
|
1:discard; 2:forward(default)."
|
|
::= { hwL2IfEntry 14 }
|
|
|
|
hwL2IfDiscardUnknownMcast OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The flag of droping the unknown mutilcast packets,
|
|
1:discard; 2:forward(default)."
|
|
::= { hwL2IfEntry 15 }
|
|
|
|
hwL2IfDiscardUnknownUcast OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The flag of droping the unknown unicast packets,
|
|
1:discard; 2:forward(default)."
|
|
::= { hwL2IfEntry 16 }
|
|
|
|
hwL2IfBpdu OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Bpdu enable in port."
|
|
::= { hwL2IfEntry 17 }
|
|
|
|
|
|
hwL2IfPortPriority OBJECT-TYPE
|
|
SYNTAX Integer32 (0..7)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port priority about interface."
|
|
::= { hwL2IfEntry 18 }
|
|
|
|
hwL2IfPortName OBJECT-TYPE
|
|
SYNTAX OCTET STRING(SIZE(0..48))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interface name."
|
|
::= { hwL2IfEntry 19 }
|
|
|
|
hwL2IfInInvalidVlanPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The number of invalid VLAN packets."
|
|
::= { hwL2IfEntry 20 }
|
|
|
|
hwL2IfFlushEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The flush enable status of layer2 port."
|
|
::= { hwL2IfEntry 21 }
|
|
|
|
hwL2IfFlushControlVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094 | 65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The control vlan of flush packet."
|
|
::= { hwL2IfEntry 22 }
|
|
hwL2IfTrustDefaultPriority OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The flag of qinq port trust default priority,
|
|
1:enable; 2:disable(default)."
|
|
::= { hwL2IfEntry 23 }
|
|
|
|
hwL2IfOfflineStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The flag of port offline status,
|
|
1:enable; 2:disable(default)."
|
|
::= { hwL2IfEntry 24 }
|
|
|
|
hwL2IfQinqVlanTransEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable QinQ VLAN translation,
|
|
1:enable; 2:disable(default)."
|
|
::= { hwL2IfEntry 25 }
|
|
|
|
hwL2IfQinqVlanTransMissDrop OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noDrop(1),
|
|
drop(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Packets are dropped when a VLAN translation miss occurs,
|
|
1:noDrop(default); 2:drop."
|
|
::= { hwL2IfEntry 26 }
|
|
|
|
hwL2IfIpSubnetVlanEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable VLAN assignment based on ip subnet,
|
|
1:enable(default); 2:disable."
|
|
::= { hwL2IfEntry 27 }
|
|
|
|
hwL2IfMacVlanEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Mac Vlan enable,
|
|
1:enable; 2:disable(default)"
|
|
::= { hwL2IfEntry 28 }
|
|
|
|
hwL2IfPolicyVlanEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Policy Vlan enable,
|
|
1:enable; 2:disable(default)"
|
|
::= { hwL2IfEntry 29 }
|
|
|
|
hwL2IfVlanPrecedence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Determine the priorities for selecting VLAN (MAC-based, subnet-based VLANs),
|
|
0:MAC VLAN(default); 1:IPSUBNET VLAN."
|
|
::= { hwL2IfEntry 30 }
|
|
|
|
hwL2IfIsolateGroupEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value enabled(1) indicates that the port is a member of the port-isolate group; disable(2) indicates that the port is not a member of the port-isolate group. The default value is disable(2)."
|
|
DEFVAL {2}
|
|
::= { hwL2IfEntry 31 }
|
|
|
|
-- ============================================================================
|
|
-- Hybrid port group
|
|
-- ============================================================================
|
|
hwL2IfHybridPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwL2IfHybridPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Hybrid-port configuration table "
|
|
::= { hwL2Interface 9 }
|
|
|
|
hwL2IfHybridPortEntry OBJECT-TYPE
|
|
SYNTAX HwL2IfHybridPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Entry of Hybrid-port configuration table "
|
|
INDEX { hwL2IfHybridPortIndex }
|
|
::= { hwL2IfHybridPortTable 1}
|
|
|
|
HwL2IfHybridPortEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hwL2IfHybridPortIndex Integer32,
|
|
hwL2IfHybridTaggedVlanListLow VlanList,
|
|
hwL2IfHybridTaggedVlanListHigh VlanList,
|
|
hwL2IfHybridUnTaggedVlanListLow VlanList,
|
|
hwL2IfHybridUnTaggedVlanListHigh VlanList
|
|
}
|
|
|
|
|
|
|
|
hwL2IfHybridPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Index of Hybrid-port "
|
|
::= { hwL2IfHybridPortEntry 1 }
|
|
|
|
|
|
hwL2IfHybridTaggedVlanListLow OBJECT-TYPE
|
|
SYNTAX VlanList (SIZE(256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The lowest possible value of the tagged vlan list on the
|
|
Hybrid-port."
|
|
::= { hwL2IfHybridPortEntry 2 }
|
|
|
|
|
|
hwL2IfHybridTaggedVlanListHigh OBJECT-TYPE
|
|
SYNTAX VlanList (SIZE(256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The highest possible value of the tagged vlan list on the
|
|
Hybrid-port."
|
|
::= { hwL2IfHybridPortEntry 3 }
|
|
|
|
|
|
hwL2IfHybridUnTaggedVlanListLow OBJECT-TYPE
|
|
SYNTAX VlanList (SIZE(256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The lowest possible value of the untagged vlan list on the
|
|
Hybrid-port."
|
|
::= { hwL2IfHybridPortEntry 4 }
|
|
|
|
|
|
hwL2IfHybridUnTaggedVlanListHigh OBJECT-TYPE
|
|
SYNTAX VlanList (SIZE(256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The highest possible value of the untagged vlan list on the
|
|
Hybrid-port."
|
|
::= { hwL2IfHybridPortEntry 5 }
|
|
|
|
|
|
-- ============================================================================
|
|
-- Trunk port group
|
|
-- ============================================================================
|
|
hwL2IfTrunkPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwL2IfTrunkPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Trunk-port configuration table. Trunk-port is a logistic port."
|
|
::= { hwL2Interface 10 }
|
|
|
|
|
|
hwL2IfTrunkPortEntry OBJECT-TYPE
|
|
SYNTAX HwL2IfTrunkPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Entry of Trunk-port configuration table "
|
|
INDEX { hwL2IfTrunkPortIndex }
|
|
::= { hwL2IfTrunkPortTable 1}
|
|
|
|
HwL2IfTrunkPortEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hwL2IfTrunkPortIndex Integer32,
|
|
hwL2IfTrunkAllowPassVlanListLow VlanList,
|
|
hwL2IfTrunkAllowPassVlanListHigh VlanList
|
|
}
|
|
|
|
|
|
hwL2IfTrunkPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Index of Trunk-port "
|
|
::= { hwL2IfTrunkPortEntry 1 }
|
|
|
|
|
|
hwL2IfTrunkAllowPassVlanListLow OBJECT-TYPE
|
|
SYNTAX VlanList (SIZE(0..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The lowest possible value of the Vlan list that port Trunk allows
|
|
to pass."
|
|
::= { hwL2IfTrunkPortEntry 2 }
|
|
|
|
|
|
hwL2IfTrunkAllowPassVlanListHigh OBJECT-TYPE
|
|
SYNTAX VlanList (SIZE(0..256))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The highest possible value of the Vlan list that port Trunk
|
|
allows to pass."
|
|
::= { hwL2IfTrunkPortEntry 3 }
|
|
|
|
hwL2IfPortIsolateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwL2IfPortIsolateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Port isolate in the same Service-instance table. The Service-instance
|
|
is used to communicate among different vlans."
|
|
::= { hwL2Interface 11 }
|
|
|
|
hwL2IfPortIsolateEntry OBJECT-TYPE
|
|
SYNTAX HwL2IfPortIsolateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Entry of port isolate configuration table."
|
|
INDEX { hwL2IfPortIsolatePortIndex,hwL2IfPortIsolateSIName }
|
|
::= { hwL2IfPortIsolateTable 1}
|
|
|
|
HwL2IfPortIsolateEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hwL2IfPortIsolatePortIndex
|
|
Integer32,
|
|
hwL2IfPortIsolateSIName
|
|
OCTET STRING,
|
|
hwL2IfPortIsolateRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
hwL2IfPortIsolatePortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The port index of L2 interface."
|
|
::= { hwL2IfPortIsolateEntry 1 }
|
|
|
|
hwL2IfPortIsolateSIName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..31))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The name of Service-instance.The Service-instance(S.I.)is used to
|
|
communicate among different vlans."
|
|
::= { hwL2IfPortIsolateEntry 2 }
|
|
|
|
hwL2IfPortIsolateRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The RowStatus of hwL2IfPortIsolateTable."
|
|
::= { hwL2IfPortIsolateEntry 3 }
|
|
|
|
|
|
-- ============================================================================
|
|
-- hwL2IfSuppressionTable
|
|
-- ============================================================================
|
|
|
|
hwL2IfSuppressionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwL2IfSuppressionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port suppression configuration table "
|
|
::= { hwL2Interface 12 }
|
|
|
|
hwL2IfSuppressionEntry OBJECT-TYPE
|
|
SYNTAX HwL2IfSuppressionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry of port suppression configuration table "
|
|
INDEX { hwL2IfSuppressionPortIndex ,hwL2IfSuppressionType }
|
|
::= { hwL2IfSuppressionTable 1}
|
|
|
|
HwL2IfSuppressionEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hwL2IfSuppressionPortIndex
|
|
Integer32,
|
|
hwL2IfSuppressionType
|
|
INTEGER,
|
|
hwL2IfSuppressionCir
|
|
Integer32,
|
|
hwL2IfSuppressionCbs
|
|
Integer32,
|
|
hwL2IfSuppressionRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
hwL2IfSuppressionPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..512)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The port index of L2 interface."
|
|
::= { hwL2IfSuppressionEntry 1 }
|
|
|
|
hwL2IfSuppressionType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
broadcast(1),
|
|
multicast(2),
|
|
unicast(3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Type of port suppression command, a unique value from 1 to 3:
|
|
1 means broadcast suppression;
|
|
2 means multicast suppression;
|
|
3 means unicast suppression."
|
|
::= { hwL2IfSuppressionEntry 2 }
|
|
|
|
hwL2IfSuppressionCir OBJECT-TYPE
|
|
SYNTAX Integer32 (0..10000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Committed Information Rate. Unit: kbps."
|
|
::= { hwL2IfSuppressionEntry 3 }
|
|
|
|
hwL2IfSuppressionCbs OBJECT-TYPE
|
|
SYNTAX Integer32 (2048..64000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Committed Burst Size. Unit: byte"
|
|
::= { hwL2IfSuppressionEntry 4 }
|
|
|
|
hwL2IfSuppressionRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The RowStatus of hwL2IfSuppressionTable
|
|
."
|
|
::= { hwL2IfSuppressionEntry 5 }
|
|
|
|
|
|
-- ============================================================================
|
|
-- hwL2IfVlanSuppressionTable
|
|
-- ============================================================================
|
|
|
|
hwL2IfVlanSuppressionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwL2IfVlanSuppressionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port and Vlan suppression configuration table "
|
|
::= { hwL2Interface 13 }
|
|
|
|
hwL2IfVlanSuppressionEntry OBJECT-TYPE
|
|
SYNTAX HwL2IfVlanSuppressionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry of port and Vlan suppression configuration table "
|
|
INDEX { hwL2IfVlanSuppressionPortIndex ,hwL2IfVlanSuppressionStartVlan, hwL2IfVlanSuppressionEndVlan }
|
|
::= { hwL2IfVlanSuppressionTable 1}
|
|
|
|
HwL2IfVlanSuppressionEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hwL2IfVlanSuppressionPortIndex
|
|
Integer32,
|
|
hwL2IfVlanSuppressionStartVlan
|
|
Integer32,
|
|
hwL2IfVlanSuppressionEndVlan
|
|
Integer32,
|
|
hwL2IfVlanSuppressionCir
|
|
Integer32,
|
|
hwL2IfVlanSuppressionCbs
|
|
Integer32,
|
|
hwL2IfVlanSuppressionRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
hwL2IfVlanSuppressionPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..512)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The port index of L2 interface."
|
|
::= { hwL2IfVlanSuppressionEntry 1 }
|
|
|
|
hwL2IfVlanSuppressionStartVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The start vlan-id of port and vlan suppression."
|
|
::= { hwL2IfVlanSuppressionEntry 2 }
|
|
|
|
hwL2IfVlanSuppressionEndVlan OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4094)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The end vlan-id of port and vlan suppression."
|
|
::= { hwL2IfVlanSuppressionEntry 3 }
|
|
|
|
hwL2IfVlanSuppressionCir OBJECT-TYPE
|
|
SYNTAX Integer32 (0..10000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Committed Information Rate. Unit: kbps."
|
|
::= { hwL2IfVlanSuppressionEntry 4 }
|
|
|
|
hwL2IfVlanSuppressionCbs OBJECT-TYPE
|
|
SYNTAX Integer32 (2048..64000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Committed Burst Size. Unit: byte"
|
|
::= { hwL2IfVlanSuppressionEntry 5 }
|
|
|
|
hwL2IfVlanSuppressionRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The RowStatus of hwL2IfVlanSuppressionTable
|
|
."
|
|
::= { hwL2IfVlanSuppressionEntry 6 }
|
|
|
|
|
|
hwL2IfPortTcnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwL2IfPortTcnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Port TCN in the same Service-instance table. The Service-instance
|
|
is used to configure TCN."
|
|
::= { hwL2Interface 14 }
|
|
|
|
hwL2IfPortTcnEntry OBJECT-TYPE
|
|
SYNTAX HwL2IfPortTcnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Entry of port TCN configuration table."
|
|
INDEX { hwL2IfTcnPortIndex }
|
|
::= { hwL2IfPortTcnTable 1}
|
|
|
|
HwL2IfPortTcnEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hwL2IfTcnPortIndex
|
|
Integer32,
|
|
hwL2IfTcnStp
|
|
EnabledStatus,
|
|
hwL2IfTcnSmartLink
|
|
EnabledStatus,
|
|
hwL2IfTcnVlanListLow
|
|
OCTET STRING,
|
|
hwL2IfTcnVlanListHigh
|
|
OCTET STRING
|
|
}
|
|
|
|
hwL2IfTcnPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The port index of L2 interface."
|
|
::= { hwL2IfPortTcnEntry 1 }
|
|
|
|
hwL2IfTcnStp OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Status indicates if the interface is allowed to notify stp TCN message
|
|
, enable(1) can be setted, (enabled(1) means that
|
|
the interface can notify TCN), otherwise disabled(2)
|
|
can be setted."
|
|
::= { hwL2IfPortTcnEntry 2 }
|
|
|
|
hwL2IfTcnSmartLink OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Status indicates if the interface is allowed to notify SmartLink TCN message,
|
|
enable(1) can be setted, (enabled(1) means that
|
|
the interface can notify TCN), otherwise disabled(2)
|
|
can be setted."
|
|
::= { hwL2IfPortTcnEntry 3 }
|
|
|
|
hwL2IfTcnVlanListLow OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest possible value of the vlan list on the
|
|
Tcn-port."
|
|
::= { hwL2IfPortTcnEntry 4 }
|
|
|
|
hwL2IfTcnVlanListHigh OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The highest possible value of the vlan list on the
|
|
Tcn-port."
|
|
::= { hwL2IfPortTcnEntry 5 }
|
|
hwL2IfPortLoopDetectTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwL2IfPortLoopDetectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing the port external loopback detection information for device.
|
|
It can protect the port from external loopback."
|
|
::= { hwL2Interface 15 }
|
|
|
|
hwL2IfPortLoopDetectEntry OBJECT-TYPE
|
|
SYNTAX HwL2IfPortLoopDetectEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entries of the port external loopback detection table."
|
|
INDEX { hwL2IfPortLoopDetectPort }
|
|
::= { hwL2IfPortLoopDetectTable 1 }
|
|
|
|
HwL2IfPortLoopDetectEntry ::=
|
|
SEQUENCE {
|
|
hwL2IfPortLoopDetectPort
|
|
Integer32,
|
|
hwL2IfPortLoopDetectEnabled
|
|
EnabledStatus,
|
|
hwL2IfPortLoopDetectInterval
|
|
Integer32,
|
|
hwL2IfPortLoopDetectAction
|
|
INTEGER,
|
|
hwL2IfPortLoopDetectStatus
|
|
INTEGER,
|
|
hwL2IfPortLoopDetectProtocol
|
|
OCTET STRING
|
|
}
|
|
|
|
hwL2IfPortLoopDetectPort OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port number which will be configured port external loopback detection."
|
|
::= { hwL2IfPortLoopDetectEntry 1 }
|
|
|
|
hwL2IfPortLoopDetectEnabled OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this object is set to 'enabled(1)' Port external loopback detection
|
|
is enabled on this port else disabled."
|
|
::= { hwL2IfPortLoopDetectEntry 2 }
|
|
|
|
hwL2IfPortLoopDetectInterval OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The detect period of port external loopback detection."
|
|
::= { hwL2IfPortLoopDetectEntry 3 }
|
|
|
|
hwL2IfPortLoopDetectAction OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
shutdown(1),
|
|
block(2),
|
|
trap(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port external loopback detection protect action of this entry."
|
|
::= { hwL2IfPortLoopDetectEntry 4 }
|
|
|
|
hwL2IfPortLoopDetectStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
normal(1),
|
|
block(2),
|
|
shutdown(3),
|
|
trap(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current status of port(block/shutdown/trap/normal)."
|
|
::= { hwL2IfPortLoopDetectEntry 5 }
|
|
|
|
hwL2IfPortLoopDetectProtocol OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(2))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ethernet type of the detecting packet to port external loopback detection."
|
|
::= { hwL2IfPortLoopDetectEntry 6 }
|
|
|
|
|
|
hwL2IfPortProtocolVlanDataTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwL2IfPortProtocolVlanDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of protocol vlan by port."
|
|
::= { hwL2Interface 16 }
|
|
|
|
hwL2IfPortProtocolVlanDataEntry OBJECT-TYPE
|
|
SYNTAX HwL2IfPortProtocolVlanDataEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of protocol vlan by port."
|
|
INDEX { hwL2IfPortProtocolVlanDataPortIndex }
|
|
::= { hwL2IfPortProtocolVlanDataTable 1 }
|
|
|
|
HwL2IfPortProtocolVlanDataEntry ::=
|
|
SEQUENCE {
|
|
hwL2IfPortProtocolVlanDataPortIndex
|
|
Integer32,
|
|
hwL2IfPortProtocolVlanDataVlan
|
|
Integer32,
|
|
hwL2IfPortProtocolVlanDataPri
|
|
Integer32,
|
|
hwL2IfPortProtocolVlanDataRowStatus
|
|
RowStatus
|
|
|
|
}
|
|
hwL2IfPortProtocolVlanDataPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..479)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protocol vlan Index of port ."
|
|
::= { hwL2IfPortProtocolVlanDataEntry 1 }
|
|
|
|
hwL2IfPortProtocolVlanDataVlan OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN ID."
|
|
::= { hwL2IfPortProtocolVlanDataEntry 2 }
|
|
|
|
hwL2IfPortProtocolVlanDataPri OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"VLAN PRI."
|
|
::= { hwL2IfPortProtocolVlanDataEntry 3 }
|
|
|
|
hwL2IfPortProtocolVlanDataRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Operation status."
|
|
::= { hwL2IfPortProtocolVlanDataEntry 4 }
|
|
|
|
|
|
-- ============================================================================
|
|
-- hwL2IfPwSuppressionTable
|
|
-- ============================================================================
|
|
|
|
hwL2IfPwSuppressionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwL2IfPwSuppressionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Pw suppression configuration table "
|
|
::= { hwL2Interface 17 }
|
|
|
|
hwL2IfPwSuppressionEntry OBJECT-TYPE
|
|
SYNTAX HwL2IfPwSuppressionEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the configuration table for PW-based unknown
|
|
traffic suppression."
|
|
INDEX { hwL2IfPwSuppressionVsiName,hwL2IfPwSuppressionPwName,hwL2IfPwSuppressionType }
|
|
::= { hwL2IfPwSuppressionTable 1}
|
|
|
|
HwL2IfPwSuppressionEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hwL2IfPwSuppressionVsiName
|
|
OCTET STRING,
|
|
hwL2IfPwSuppressionPwName
|
|
OCTET STRING,
|
|
hwL2IfPwSuppressionType
|
|
INTEGER,
|
|
hwL2IfPwSuppressionCir
|
|
Integer32,
|
|
hwL2IfPwSuppressionCbs
|
|
Integer32,
|
|
hwL2IfPwSuppressionRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
hwL2IfPwSuppressionVsiName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the name of the VSI that is configured with PW-based
|
|
unknown traffic suppression."
|
|
::= { hwL2IfPwSuppressionEntry 1 }
|
|
|
|
hwL2IfPwSuppressionPwName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..16))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the name of the PW that is configured with PW-based
|
|
unknown traffic suppression."
|
|
::= { hwL2IfPwSuppressionEntry 2 }
|
|
|
|
hwL2IfPwSuppressionType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
broadcast(1),
|
|
multicast(2),
|
|
unicast(3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object identifies the type of PW-based unknown traffic suppression:
|
|
1: broadcast suppression
|
|
2: multicast suppression
|
|
3: unknown unicast suppression"
|
|
::= { hwL2IfPwSuppressionEntry 3 }
|
|
|
|
hwL2IfPwSuppressionCir OBJECT-TYPE
|
|
SYNTAX Integer32 (100..1000000)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Committed Information Rate. Unit: kbit/s."
|
|
::= { hwL2IfPwSuppressionEntry 4 }
|
|
|
|
hwL2IfPwSuppressionCbs OBJECT-TYPE
|
|
SYNTAX Integer32 (100..33554432)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the Committed Burst Size. Unit: byte."
|
|
::= { hwL2IfPwSuppressionEntry 5 }
|
|
|
|
hwL2IfPwSuppressionRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the RowStatus of hwPwSuppressionTable."
|
|
::= { hwL2IfPwSuppressionEntry 50 }
|
|
|
|
-- ============================================================================
|
|
-- hwL2IfLoopDetectInterval
|
|
-- ============================================================================
|
|
hwL2IfLoopDetectInterval OBJECT-TYPE
|
|
SYNTAX Integer32 (5..300)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The detect period of system external loopback detection."
|
|
::= { hwL2Interface 18 }
|
|
|
|
-- ============================================================================
|
|
-- real-time relationship of port-vlan
|
|
-- ============================================================================
|
|
hwL2IfDynamicPortVlanTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwL2IfDynamicPortVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table for dynamic relationship of port-vlan."
|
|
::= { hwL2Interface 19 }
|
|
|
|
hwL2IfDynamicPortVlanEntry OBJECT-TYPE
|
|
SYNTAX HwL2IfDynamicPortVlanEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry of dynamic port-vlan relationship table."
|
|
INDEX { hwL2IfDynamicPortVlanPortIndex,hwL2IfDynamicPortVlanServiceType }
|
|
::= { hwL2IfDynamicPortVlanTable 1}
|
|
|
|
HwL2IfDynamicPortVlanEntry ::=
|
|
SEQUENCE
|
|
{
|
|
hwL2IfDynamicPortVlanPortIndex
|
|
Integer32,
|
|
hwL2IfDynamicPortVlanServiceType
|
|
INTEGER,
|
|
hwL2IfDynamicPortVlanPvid
|
|
VlanIdOrNone,
|
|
hwL2IfDynamicPortVlanUntaggedVlanListLow
|
|
VlanList,
|
|
hwL2IfDynamicPortVlanUntaggedVlanListHigh
|
|
VlanList,
|
|
hwL2IfDynamicPortVlanTaggedVlanListLow
|
|
VlanList,
|
|
hwL2IfDynamicPortVlanTaggedVlanListHigh
|
|
VlanList
|
|
}
|
|
|
|
hwL2IfDynamicPortVlanPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port index of switch-port."
|
|
::= { hwL2IfDynamicPortVlanEntry 1 }
|
|
|
|
hwL2IfDynamicPortVlanServiceType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
configured(1),
|
|
gvrp(2),
|
|
voiceVLAN(3),
|
|
unAuthenUserVLAN(4),
|
|
dynAuthenVLAN(5),
|
|
hvrp(6),
|
|
elmi(7)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Service type of dynamic port-vlan relationship table."
|
|
::= { hwL2IfDynamicPortVlanEntry 2 }
|
|
|
|
hwL2IfDynamicPortVlanPvid OBJECT-TYPE
|
|
SYNTAX VlanIdOrNone
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Dynamic PVID of port-vlan table."
|
|
::= { hwL2IfDynamicPortVlanEntry 3 }
|
|
|
|
hwL2IfDynamicPortVlanUntaggedVlanListLow OBJECT-TYPE
|
|
SYNTAX VlanList (SIZE(256))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest possible value of the untagged vlan list of dynamic port-vlan table."
|
|
::= { hwL2IfDynamicPortVlanEntry 4 }
|
|
|
|
hwL2IfDynamicPortVlanUntaggedVlanListHigh OBJECT-TYPE
|
|
SYNTAX VlanList (SIZE(256))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest possible value of the untagged vlan list of Dynamic port-vlan table."
|
|
::= { hwL2IfDynamicPortVlanEntry 5 }
|
|
|
|
hwL2IfDynamicPortVlanTaggedVlanListLow OBJECT-TYPE
|
|
SYNTAX VlanList (SIZE(256))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lowest possible value of the tagged vlan list of Dynamic port-vlan table."
|
|
::= { hwL2IfDynamicPortVlanEntry 6 }
|
|
|
|
hwL2IfDynamicPortVlanTaggedVlanListHigh OBJECT-TYPE
|
|
SYNTAX VlanList (SIZE(256))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The highest possible value of the tagged vlan list of Dynamic port-vlan table."
|
|
::= { hwL2IfDynamicPortVlanEntry 7 }
|
|
|
|
hwL2IfTraps OBJECT IDENTIFIER ::= { hwL2IfObjects 2 }
|
|
|
|
hwL2IfInvalidVlanPacketAlarm NOTIFICATION-TYPE
|
|
OBJECTS {hwL2IfPortName,hwL2IfInInvalidVlanPkts}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Warning of receiving invalid VLAN packets in the interface."
|
|
::= { hwL2IfTraps 1 }
|
|
|
|
hwLoopDetectStatusAlarm NOTIFICATION-TYPE
|
|
OBJECTS {ifDescr,hwL2IfPortLoopDetectStatus}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port status changed because loopback detect.(Normal/Block/Shutdown/Trap)"
|
|
::= { hwL2IfTraps 2 }
|
|
|
|
hwL2IfConformance OBJECT IDENTIFIER ::= { hwL2IfMib 2 }
|
|
|
|
|
|
|
|
hwL2IfCompliances OBJECT IDENTIFIER ::= { hwL2IfConformance 1 }
|
|
|
|
|
|
hwL2IfMacAddrGroup OBJECT-GROUP
|
|
OBJECTS{
|
|
hwL2IfMacAddrLearnMode ,
|
|
hwL2IfMacAddressLearn
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects indicate mac address learn of the interface."
|
|
::= { hwL2IfGroups 1 }
|
|
|
|
hwL2IfBroadcastRatioGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
hwL2IfBcastRatio,
|
|
hwL2IfMcastRatio,
|
|
hwL2IfUcastRatio,
|
|
hwL2IfOutBcastRatio ,
|
|
hwL2IfOutMcastRatio ,
|
|
hwL2IfOutUcastRatio
|
|
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects indicate broadcast-suppression ratio."
|
|
::= { hwL2IfGroups 2 }
|
|
|
|
hwL2IfHybridTaggedVlanGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
hwL2IfHybridTaggedVlanListLow ,
|
|
hwL2IfHybridTaggedVlanListHigh ,
|
|
hwL2IfHybridUnTaggedVlanListLow ,
|
|
hwL2IfHybridUnTaggedVlanListHigh
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects indicate lowest/highest possible value of
|
|
the tagged/untagged vlan list on the Hybrid-port."
|
|
::= { hwL2IfGroups 3 }
|
|
|
|
hwL2IfTrunkAllowPassVlanListGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
hwL2IfTrunkAllowPassVlanListLow ,
|
|
hwL2IfTrunkAllowPassVlanListHigh
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects indicate lowest/highed possible value of the
|
|
allowed and passed vlan list on the Trunk-port."
|
|
::= { hwL2IfGroups 4 }
|
|
|
|
hwL2IfPortGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
hwL2IfPortIfIndex,
|
|
hwL2IfIsSrcMacFilter
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects indicate index of layer2 port."
|
|
::= { hwL2IfGroups 5 }
|
|
|
|
|
|
hwL2IfPVIDGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
hwL2IfPVID
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects indicate PVID of layer2 interface."
|
|
::= { hwL2IfGroups 6 }
|
|
|
|
hwL2IfPortTypeGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
hwL2IfPortType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects indicate VLAN type of layer2 interface."
|
|
::= { hwL2IfGroups 7 }
|
|
|
|
hwL2IfPortMaxGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
hwL2IfPortMax,
|
|
hwL2TopologyDetect
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects indicate that the device supports maxmum of
|
|
port ."
|
|
::= { hwL2IfGroups 8 }
|
|
|
|
hwL2IfPortExtGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
hwL2IfBpdu,
|
|
hwL2IfDiscardBcast,
|
|
hwL2IfDiscardUnknownMcast,
|
|
hwL2IfDiscardUnknownUcast,
|
|
hwL2IfPortPriority,
|
|
hwL2IfPortName,
|
|
hwL2IfInInvalidVlanPkts,
|
|
hwL2IfFlushEnable,
|
|
hwL2IfFlushControlVlan,
|
|
hwL2IfTrustDefaultPriority,
|
|
hwL2IfOfflineStatus,
|
|
hwL2IfQinqVlanTransEnable,
|
|
hwL2IfQinqVlanTransMissDrop,
|
|
hwL2IfIpSubnetVlanEnable,
|
|
hwL2IfMacVlanEnable,
|
|
hwL2IfPolicyVlanEnable,
|
|
hwL2IfVlanPrecedence,
|
|
hwL2IfIsolateGroupEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects indicate that the device supports attribute of
|
|
port ."
|
|
::= { hwL2IfGroups 9 }
|
|
|
|
hwL2IfPortIsolateGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
hwL2IfPortIsolateRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects indicate that the device supports islation of port ."
|
|
::= { hwL2IfGroups 10 }
|
|
|
|
hwL2IfAlarmGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS
|
|
{
|
|
hwL2IfInvalidVlanPacketAlarm,
|
|
hwLoopDetectStatusAlarm
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects indicate that the device supports alarm of port ."
|
|
::= { hwL2IfGroups 11 }
|
|
|
|
|
|
hwL2IfSuppressionGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
hwL2IfSuppressionCir,
|
|
hwL2IfSuppressionCbs,
|
|
hwL2IfSuppressionRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects that L2IfSuppression."
|
|
::= { hwL2IfGroups 12 }
|
|
|
|
hwL2IfVlanSuppressionGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
hwL2IfVlanSuppressionCir,
|
|
hwL2IfVlanSuppressionCbs,
|
|
hwL2IfVlanSuppressionRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of values indicate that 'Committed infomation rate'."
|
|
::= { hwL2IfGroups 13 }
|
|
|
|
hwL2IfPortTcnGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
hwL2IfTcnStp,
|
|
hwL2IfTcnSmartLink,
|
|
hwL2IfTcnVlanListLow,
|
|
hwL2IfTcnVlanListHigh
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects indicate that the device supports islation of port ."
|
|
::= { hwL2IfGroups 14 }
|
|
hwL2IfPortLoopDetectGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
hwL2IfPortLoopDetectEnabled,
|
|
hwL2IfPortLoopDetectInterval,
|
|
hwL2IfPortLoopDetectAction,
|
|
hwL2IfPortLoopDetectStatus,
|
|
hwL2IfPortLoopDetectProtocol,
|
|
hwL2IfLoopDetectInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects indicate that the port external loopback detection."
|
|
::= { hwL2IfGroups 15 }
|
|
|
|
hwL2IfPortProtocolVlanDataGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
hwL2IfPortProtocolVlanDataVlan,
|
|
hwL2IfPortProtocolVlanDataPri,
|
|
hwL2IfPortProtocolVlanDataRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The entry of protocol vlan by port."
|
|
::= { hwL2IfGroups 16 }
|
|
|
|
hwL2IfPwSuppressionGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
hwL2IfPwSuppressionCir,
|
|
hwL2IfPwSuppressionCbs,
|
|
hwL2IfPwSuppressionRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects in L2IfPwSuppression."
|
|
::= { hwL2IfGroups 17 }
|
|
|
|
hwL2IfDynamicPortVlanTableGroup OBJECT-GROUP
|
|
OBJECTS
|
|
{
|
|
hwL2IfDynamicPortVlanPvid,
|
|
hwL2IfDynamicPortVlanUntaggedVlanListLow,
|
|
hwL2IfDynamicPortVlanUntaggedVlanListHigh,
|
|
hwL2IfDynamicPortVlanTaggedVlanListLow,
|
|
hwL2IfDynamicPortVlanTaggedVlanListHigh
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects of dynamic relationship of port-vlan."
|
|
::= { hwL2IfGroups 19 }
|
|
|
|
-- ----------------------------------------------------------------------------
|
|
-- compliance statements
|
|
-- ----------------------------------------------------------------------------
|
|
hwL2IfCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities implementing
|
|
the Huawei layer two interface management MIB"
|
|
|
|
MODULE
|
|
MANDATORY-GROUPS { hwL2IfMacAddrGroup }
|
|
|
|
GROUP hwL2IfBroadcastRatioGroup
|
|
DESCRIPTION
|
|
"This group supports in every device."
|
|
|
|
GROUP hwL2IfHybridTaggedVlanGroup
|
|
DESCRIPTION
|
|
"This group supports in every device."
|
|
|
|
GROUP hwL2IfTrunkAllowPassVlanListGroup
|
|
DESCRIPTION
|
|
"This group supports in every device."
|
|
|
|
GROUP hwL2IfPortGroup
|
|
DESCRIPTION
|
|
"This group supports in every device."
|
|
|
|
|
|
GROUP hwL2IfPVIDGroup
|
|
DESCRIPTION
|
|
"This group supports in every device."
|
|
|
|
GROUP hwL2IfPortTypeGroup
|
|
DESCRIPTION
|
|
"This group supports in every device."
|
|
|
|
GROUP hwL2IfPortMaxGroup
|
|
DESCRIPTION
|
|
"This group supports in every device."
|
|
GROUP hwL2IfPortExtGroup
|
|
DESCRIPTION
|
|
"This group supports in every device."
|
|
::= { hwL2IfCompliances 1 }
|
|
|
|
hwL2IfGroups OBJECT IDENTIFIER ::= { hwL2IfConformance 2 }
|
|
|
|
END
|