x/compass-core
Code Issues Proposed changes
15ffc5e1aa
compass-core/mibs/HUAWEI-ENTITY-EXTENT-MIB.mib

3265 lines
118 KiB
Plaintext
Raw Blame History

--
-- HUAWEI-ENTITY-EXTENT-MIB.mib
-- MIB generated by Visual MIB Builder Version 4.0 Build 341
-- Friday, July 15, 2011 at 16:41:48
--
HUAWEI-ENTITY-EXTENT-MIB DEFINITIONS ::= BEGIN
IMPORTS
entPhysicalIndex, entPhysicalVendorType, PhysicalClass, PhysicalIndex
FROM ENTITY-MIB
hwDatacomm
FROM HUAWEI-MIB
InterfaceIndex
FROM IF-MIB
EnabledStatus
FROM P-BRIDGE-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
Integer32, Unsigned32, Counter64, BITS, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
DateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION, AutonomousType
FROM SNMPv2-TC;
-- 1.3.6.1.4.1.2011.5.25.31
hwEntityExtentMIB MODULE-IDENTITY
LAST-UPDATED "201107151641Z"
ORGANIZATION
"Huawei Technologies co.,Ltd."
CONTACT-INFO
" R&D BeiJing, Huawei Technologies co.,Ltd.
Huawei Bld.,NO.3 Xinxi Rd.,
Shang-Di Information Industry Base,
Hai-Dian District Beijing P.R. China
Zip:100085
Http://www.huawei.com
E-mail:support@huawei.com "
DESCRIPTION
"The private mib file includes the general extent
information of the device."
::= { hwDatacomm 31 }
--
-- Textual conventions
--
HwAdminState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the various possible administrative states.
A value of locked means the resource is administratively
prohibited from use. A value of shuttingDown means that
usage is administratively limited to current instances of
use. A value of unlocked means the resource is not
administratively prohibited from use. A value of up means
that the port is not administratively shut down and a value
of down is the oppsite. A value of loopback here means the
port is working in the loopback local mode. When a port is
both shut down and looped back, we user the vale of down."
REFERENCE
"ITU Recommendation X.731, 'Information Technology - Open
Systems Interconnection - System Management: State
Management Function', 1992"
SYNTAX INTEGER
{
notSupported(1),
locked(2),
shuttingDown(3),
unlocked(4),
up(11),
down(12),
loopback(13)
}
HwOperState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the possible values of operational states.
A value of disabled means the resource is totally
inoperable. A value of enabled means the resource
is partially or fully operable. The values up(11),down(12) and
connect(13) is used only for NE5000E BTB or it's extended system.
A value of protocolUp means the port is available in the protocol
lay or has already prepared for transmitting or receiving data.
A value of linkUp means the port is only available in the physical
lay. A value of linkDown means the port is not available physically."
REFERENCE
"ITU Recommendation X.731, 'Information Technology - Open
Systems Interconnection - System Management: State
Management Function', 1992"
SYNTAX INTEGER
{
notSupported(1),
disabled(2),
enabled(3),
offline(4),
up(11),
down(12),
connect(13),
protocolUp(15),
linkUp(16),
linkDown(17)
}
HwStandbyStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Represents the possible values of standby status.
A value of hotStandby means the resource is not providing
service, but is will be immediately able to take over the
role of the resource to be backed-up, without the need for
initialization activity, and will contain the same
information as the resource to be backed up. A value of
coldStandy means that the resource is to back-up another
resource, but will not be immediately able to take over
the role of a resource to be backed up, and will require
some initialization activity. A value of providingService
means the resource is providing service."
REFERENCE
"ITU Recommendation X.731, 'Information Technology - Open
Systems Interconnection - System Management: State
Management Function', 1992"
SYNTAX INTEGER
{
notSupported(1),
hotStandby(2),
coldStandby(3),
providingService(4)
}
HwAlarmStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the possible values of alarm status.
When no bits of this attribute are set, then none of the
status conditions described below are present. When the
value of under repair is set, the resource is currently
being repaired.
When the value of critical is set, one or more critical
alarms are active against the resource. When the value of
major is set, one or more major alarms are active against
the resource. When the value of minor is set, one or more
minor alarms are active against the resource. When the
value of warning is set, one or more warning alarms are
active against the resource. When the value of
indeterminate is set, one or more alarms of indeterminate
severity are active against the resource.
When the value of alarm outstanding is set, one or more
alarms is active against the resource. The fault may or may
not be disabling. "
REFERENCE
"ITU Recommendation X.731, 'Information Technology - Open
Systems Interconnection - System Management: State
Management Function', 1992"
SYNTAX BITS
{
notSupported(0),
underRepair(1),
critical(2),
major(3),
minor(4),
alarmOutstanding(5),
warning(6),
indeterminate(7)
}
HWLevelState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The normal state of input line ."
SYNTAX INTEGER
{
lowLevel(1),
highLevel(2)
}
--
-- Node definitions
--
-- 1.3.6.1.4.1.2011.5.25.31.1
hwEntityExtObjects OBJECT IDENTIFIER ::= { hwEntityExtentMIB 1 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1
hwEntityState OBJECT IDENTIFIER ::= { hwEntityExtObjects 1 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1
hwEntityStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEntityStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per physical entity, There is
always at least one row for an 'overall' physical entity.
The information in each row may be not include all the object
in this table, because of the entity need not some of the
information here. "
::= { hwEntityState 1 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1
hwEntityStateEntry OBJECT-TYPE
SYNTAX HwEntityStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular physical entity.
Each entry provides objects (entPhysicalDescr,
entPhysicalVendorType, and entPhysicalClass) to help an NMS
identify and characterize the entry, and objects
(entPhysicalContainedIn and entPhysicalParentRelPos) to help
an NMS relate the particular entry to other entries in this
table."
INDEX { entPhysicalIndex }
::= { hwEntityStateTable 1 }
HwEntityStateEntry ::=
SEQUENCE {
hwEntityAdminStatus
HwAdminState,
hwEntityOperStatus
HwOperState,
hwEntityStandbyStatus
HwStandbyStatus,
hwEntityAlarmLight
HwAlarmStatus,
hwEntityCpuUsage
Integer32,
hwEntityCpuUsageThreshold
Integer32,
hwEntityMemUsage
Integer32,
hwEntityMemUsageThreshold
Integer32,
hwEntityMemSize
Integer32,
hwEntityUpTime
Integer32,
hwEntityTemperature
Integer32,
hwEntityTemperatureThreshold
Integer32,
hwEntityVoltage
Integer32,
hwEntityVoltageLowThreshold
Integer32,
hwEntityVoltageHighThreshold
Integer32,
hwEntityTemperatureLowThreshold
Integer32,
hwEntityOpticalPower
Integer32,
hwEntityCurrent
Integer32,
hwEntityMemSizeMega
Integer32,
hwEntityPortType
INTEGER,
hwEntityDuplex
INTEGER,
hwEntityOpticalPowerRx
Integer32,
hwEntityCpuUsageLowThreshold
Integer32,
hwEntityBoardPower
Integer32,
hwEntityCpuFrequency
Integer32,
hwEntitySupportFlexCard
INTEGER,
hwEntityBoardClass
INTEGER,
hwNseOpmStatus
Integer32,
hwEntityCpuMaxUsage
Integer32,
hwEntityCPUType
SnmpAdminString,
hwEntityMemoryType
SnmpAdminString,
hwEntityFlashSize
Integer32,
hwEntityIfUpTimes
Integer32,
hwEntityIfDownTimes
Integer32,
hwEntityCPUAvgUsage
Integer32,
hwEntityMemoryAvgUsage
Integer32
}
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.1
hwEntityAdminStatus OBJECT-TYPE
SYNTAX HwAdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The administrative state for this object, and it is possible to set
the state when needed. "
::= { hwEntityStateEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.2
hwEntityOperStatus OBJECT-TYPE
SYNTAX HwOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The operational state for this object. "
::= { hwEntityStateEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.3
hwEntityStandbyStatus OBJECT-TYPE
SYNTAX HwStandbyStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Some entity in a device can support standby mode,
This object is used for monitoring standby status. "
::= { hwEntityStateEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.4
hwEntityAlarmLight OBJECT-TYPE
SYNTAX HwAlarmStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The alarm status for this entity. It does not include
the severity of alarms raised on child components. On
the condition, there are a alarm light on the entity,
the object should have the same status with it."
::= { hwEntityStateEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.5
hwEntityCpuUsage OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The CPU usage for this entity. Generally, the CPU usage
will calculate the overall CPU usage on the entity, and it
is not sensible with the number of CPU on the entity. "
::= { hwEntityStateEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.6
hwEntityCpuUsageThreshold OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The threshold for the CPU usage. When the CPU usage exceed
the threshold, a notification will be sent. "
::= { hwEntityStateEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.7
hwEntityMemUsage OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The memory usage for the entity. This object point out how
many percent of memory has been used. "
::= { hwEntityStateEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.8
hwEntityMemUsageThreshold OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The threshold for the Memory usage, When the memory usage
exceed the threshold, a notification will be sent. "
::= { hwEntityStateEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.9
hwEntityMemSize OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The size of memory for the entity. "
::= { hwEntityStateEntry 9 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.10
hwEntityUpTime OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The up time for the entity. The mean of up time is
when the entity is up, and the value of the object
will add one per seconds while the entity running. "
::= { hwEntityStateEntry 10 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.11
hwEntityTemperature OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The temperature for the entity. "
::= { hwEntityStateEntry 11 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.12
hwEntityTemperatureThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The threshold for the temperature. When the temperature
exceed the threshold, a notification will be sent. "
::= { hwEntityStateEntry 12 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.13
hwEntityVoltage OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The voltage for the entity. "
::= { hwEntityStateEntry 13 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.14
hwEntityVoltageLowThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The low-threshold for the voltage. Generally, we have two
threshold for the voltage, one is low-threshold, and the other
is high-threshold. the normal status of voltage should be
greater than the low-threshold, and lower than the high-threshold.
When the voltage low than the low-threshold, a notification
will be sent. "
::= { hwEntityStateEntry 14 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.15
hwEntityVoltageHighThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The high-threshold for the voltage. Generally, we have two
threshold for the voltage, one is low-threshold, and the other
is high-threshold. the normal status of voltage should be
greater than the low-threshold, and lower than the high-threshold.
When the voltage greater than the high-threshold, a notification
will be sent. "
::= { hwEntityStateEntry 15 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.16
hwEntityTemperatureLowThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The low-threshold of temperature. If the device temperature is
lower than the threshold, an alarm is raised.
"
::= { hwEntityStateEntry 16 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.17
hwEntityOpticalPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The optical power of the optical module. Unit: uW"
::= { hwEntityStateEntry 17 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.18
hwEntityCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS "A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The current for the entity. "
::= { hwEntityStateEntry 18 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.19
hwEntityMemSizeMega OBJECT-TYPE
SYNTAX Integer32
UNITS "M bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The size of SDRAM(Synchronous Dynamic Random Access Memory) memory for the entity. Unit: M bytes"
::= { hwEntityStateEntry 19 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.20
hwEntityPortType OBJECT-TYPE
SYNTAX INTEGER
{
notSupported(1),
copper(2),
fiber100(3),
fiber1000(4),
fiber10000(5),
opticalnotExist(6),
optical(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the type of the Ethernet interface: an optical interface or an electrical interface. "
::= { hwEntityStateEntry 20 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.21
hwEntityDuplex OBJECT-TYPE
SYNTAX INTEGER
{
notSupported(1),
full(2),
half(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Indicates the duplex mode of the Ethernet interface. An electrical Ethernet interface can
work in half-duplex mode or full-duplex mode. An optical Ethernet can work only in full-duplex mode. "
::= { hwEntityStateEntry 21 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.22
hwEntityOpticalPowerRx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The optical power(Rx) of the optical module. Unit: uW"
::= { hwEntityStateEntry 22 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.23
hwEntityCpuUsageLowThreshold OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The threshold for the CPU usage. When the CPU usage exceed
the threshold, a notification will be sent. "
::= { hwEntityStateEntry 23 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.24
hwEntityBoardPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The board power for the entity. Unit: W"
::= { hwEntityStateEntry 24 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.25
hwEntityCpuFrequency OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The frequency of the entity. Unit: Hz"
::= { hwEntityStateEntry 25 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.26
hwEntitySupportFlexCard OBJECT-TYPE
SYNTAX INTEGER
{
notSupported(1),
flexible(2),
unflexible(3),
dummy(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" It describes whether the whole board supports flexible cards. When
the board doesn't support flexible cards, the cards may be dummy ones
whose ports will not be seen by the customer."
::= { hwEntityStateEntry 26 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.27
hwEntityBoardClass OBJECT-TYPE
SYNTAX INTEGER
{
notSupported(1),
mpu(2),
lpu(3),
sfu(4),
icu(5),
ecu(6),
fan(7),
power(8),
lcd(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" It describes the board type of the whole board."
::= { hwEntityStateEntry 27 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.28
hwNseOpmStatus OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OPM status. 0: pass, 1: bypass, 2: invalid"
::= { hwEntityStateEntry 28 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.29
hwEntityCpuMaxUsage OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The Max CPU usage for this entity. Generally, the Max CPU usage
will calculate the overall CPU usage on the entity, and it
is not sensible with the number of CPU on the entity. "
::= { hwEntityStateEntry 29 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.30
hwEntityCPUType OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU type."
::= { hwEntityStateEntry 30 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.31
hwEntityMemoryType OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Memory type."
::= { hwEntityStateEntry 31 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.32
hwEntityFlashSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Flash size, in KB."
::= { hwEntityStateEntry 32 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.33
hwEntityIfUpTimes OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Times that the interface goes Up."
::= { hwEntityStateEntry 33 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.34
hwEntityIfDownTimes OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Times that the interface goes Down."
::= { hwEntityStateEntry 34 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.35
hwEntityCPUAvgUsage OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average CPU usage within a specified statistical interval."
::= { hwEntityStateEntry 35 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.36
hwEntityMemoryAvgUsage OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average memory usage within a specified statistical interval."
::= { hwEntityStateEntry 36 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.2
hwRUModuleInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRUModuleInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per replaceable unit physical entity.
The row with the field 'entPhysicalIsFRU' sets to 'true' in
table 'entPhysicalTable' will be mapped to one row in this
table."
::= { hwEntityState 2 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1
hwRUModuleInfoEntry OBJECT-TYPE
SYNTAX HwRUModuleInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a replaceable unit physical entity.
Each entry provides objects of a replaceable unit to help
an NMS identify and characterize the entry in this table.
"
INDEX { entPhysicalIndex }
::= { hwRUModuleInfoTable 1 }
HwRUModuleInfoEntry ::=
SEQUENCE {
hwEntityBomId
SnmpAdminString,
hwEntityBomEnDesc
SnmpAdminString,
hwEntityBomLocalDesc
SnmpAdminString,
hwEntityManufacturedDate
DateAndTime,
hwEntityManufactureCode
Integer32,
hwEntityCLEICode
SnmpAdminString,
hwEntityUpdateLog
SnmpAdminString,
hwEntityArchivesInfoVersion
SnmpAdminString,
hwEntityOpenBomId
SnmpAdminString,
hwEntityIssueNum
SnmpAdminString,
hwEntityBoardType
SnmpAdminString
}
-- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.1
hwEntityBomId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identity of the Bill of Material about this replaceable
unit which coded by vendor. This node is mapping to 'ITEM'
in the information file.
"
::= { hwRUModuleInfoEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.2
hwEntityBomEnDesc OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The English description of the Bill of Material about this
replaceable unit.
"
::= { hwRUModuleInfoEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.3
hwEntityBomLocalDesc OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The local description of the Bill of Material about this
replaceable unit.
"
::= { hwRUModuleInfoEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.4
hwEntityManufacturedDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date when this physical entity is Manufactured.
"
::= { hwRUModuleInfoEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.5
hwEntityManufactureCode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The code of the place where this physical entity is Manufactured.
"
::= { hwRUModuleInfoEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.6
hwEntityCLEICode OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string code of CLEI which was granted by America.
"
::= { hwRUModuleInfoEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.7
hwEntityUpdateLog OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The maintenance log of this replaceable unit.
"
::= { hwRUModuleInfoEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.8
hwEntityArchivesInfoVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Version of Archives Information.
"
::= { hwRUModuleInfoEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.9
hwEntityOpenBomId OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BomId for distribution. It is different from hwEntityBomId."
::= { hwRUModuleInfoEntry 9 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.10
hwEntityIssueNum OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The issue number for hardware change."
::= { hwRUModuleInfoEntry 10 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.11
hwEntityBoardType OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type code for entity."
::= { hwRUModuleInfoEntry 11 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3
hwOpticalModuleInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwOpticalModuleInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of optical module properties."
::= { hwEntityState 3 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1
hwOpticalModuleInfoEntry OBJECT-TYPE
SYNTAX HwOpticalModuleInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table of optical module properties for each optical module."
INDEX { entPhysicalIndex }
::= { hwOpticalModuleInfoTable 1 }
HwOpticalModuleInfoEntry ::=
SEQUENCE {
hwEntityOpticalMode
INTEGER,
hwEntityOpticalWaveLength
Integer32,
hwEntityOpticalTransDistance
Integer32,
hwEntityOpticalVendorSn
SnmpAdminString,
hwEntityOpticalTemperature
Integer32,
hwEntityOpticalVoltage
Integer32,
hwEntityOpticalBiasCurrent
Integer32,
hwEntityOpticalRxPower
Integer32,
hwEntityOpticalTxPower
Integer32,
hwEntityOpticalType
INTEGER,
hwEntityOpticalTransBW
Integer32,
hwEntityOpticalFiberType
INTEGER,
hwEntityOpticalRxLowThreshold
Integer32,
hwEntityOpticalRxHighThreshold
Integer32,
hwEntityOpticalTxLowThreshold
Integer32,
hwEntityOpticalTxHighThreshold
Integer32,
hwEntityOpticalPlug
INTEGER,
hwEntityOpticalDirectionType
INTEGER,
hwEntityOpticalUserEeprom
DisplayString,
hwEntityOpticalRxLowWarnThreshold
Integer32,
hwEntityOpticalRxHighWarnThreshold
Integer32,
hwEntityOpticalTxLowWarnThreshold
Integer32,
hwEntityOpticalTxHighWarnThreshold
Integer32
}
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.1
hwEntityOpticalMode OBJECT-TYPE
SYNTAX INTEGER
{
notSupported(1),
singleMode(2),
multiMode5(3),
multiMode6(4),
noValue(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mode of the optical module."
::= { hwOpticalModuleInfoEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.2
hwEntityOpticalWaveLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The wave length of the optical module. Unit: nm."
::= { hwOpticalModuleInfoEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.3
hwEntityOpticalTransDistance OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max transmission distance of the optical module. Unit: m."
::= { hwOpticalModuleInfoEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.4
hwEntityOpticalVendorSn OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor serial number (vendor SN) of the optical module. Length: 16 bytes."
::= { hwOpticalModuleInfoEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.5
hwEntityOpticalTemperature OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current temperature of the optical module. Unit: C"
::= { hwOpticalModuleInfoEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.6
hwEntityOpticalVoltage OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current voltage of the optical module. Unit: mV."
::= { hwOpticalModuleInfoEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.7
hwEntityOpticalBiasCurrent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bias current of the optical module. Unit: mA."
::= { hwOpticalModuleInfoEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.8
hwEntityOpticalRxPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The receive power of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times "
::= { hwOpticalModuleInfoEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.9
hwEntityOpticalTxPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit power of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times "
::= { hwOpticalModuleInfoEntry 9 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.10
hwEntityOpticalType OBJECT-TYPE
SYNTAX INTEGER
{
unknown(0),
sc(1),
gbic(2),
sfp(3),
esfp(4),
copper(5),
xfp(6),
xenpak(7),
transponder(8),
cfp(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the optical module."
::= { hwOpticalModuleInfoEntry 10 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.11
hwEntityOpticalTransBW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Transceiver max BW of the optical module.Unit:M"
::= { hwOpticalModuleInfoEntry 11 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.12
hwEntityOpticalFiberType OBJECT-TYPE
SYNTAX INTEGER
{
unknown(0),
sc(1),
style-1-copper-connector(2),
style-2-copper-connector(3),
bnc-tnc(4),
coaxial-headers(5),
fiberJack(6),
lc(7),
mt-rj(8),
mu(9),
sg(10),
optical-pigtail(11),
hssdcII(20),
copper-pigtail(21)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fiber type of the optical module."
::= { hwOpticalModuleInfoEntry 12 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.13
hwEntityOpticalRxLowThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The receive power low threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times "
::= { hwOpticalModuleInfoEntry 13 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.14
hwEntityOpticalRxHighThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The receive power high threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times "
::= { hwOpticalModuleInfoEntry 14 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.15
hwEntityOpticalTxLowThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit power low threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times "
::= { hwOpticalModuleInfoEntry 15 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.16
hwEntityOpticalTxHighThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit power high threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times "
::= { hwOpticalModuleInfoEntry 16 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.17
hwEntityOpticalPlug OBJECT-TYPE
SYNTAX INTEGER
{
notSupported(0),
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The optical module is plug-supported or not."
::= { hwOpticalModuleInfoEntry 17 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.18
hwEntityOpticalDirectionType OBJECT-TYPE
SYNTAX INTEGER
{
notSupported(1),
twoFiberBidirection(2),
oneFiberBidirection(3),
twoFiberTwoPortBidirection(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The direction type of the optical module."
::= { hwOpticalModuleInfoEntry 18 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.19
hwEntityOpticalUserEeprom OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..120))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The user writable EEPROM of the optical module."
::= { hwOpticalModuleInfoEntry 19 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.20
hwEntityOpticalRxLowWarnThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The receive power low warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times "
::= { hwOpticalModuleInfoEntry 20 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.21
hwEntityOpticalRxHighWarnThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The receive power high warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times "
::= { hwOpticalModuleInfoEntry 21 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.22
hwEntityOpticalTxLowWarnThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit power low warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times "
::= { hwOpticalModuleInfoEntry 22 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.23
hwEntityOpticalTxHighWarnThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit power high warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times "
::= { hwOpticalModuleInfoEntry 23 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.4
hwMonitorInputTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMonitorInputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per replaceable unit physical entity.
This table is used to set the status of monitor port."
::= { hwEntityState 4 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.4.1
hwMonitorInputEntry OBJECT-TYPE
SYNTAX HwMonitorInputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a replaceable unit physical entity."
INDEX { hwMonitorInputIndex }
::= { hwMonitorInputTable 1 }
HwMonitorInputEntry ::=
SEQUENCE {
hwMonitorInputIndex
Integer32,
hwMonitorInputName
DisplayString,
hwMonitorInputState
HWLevelState,
hwMonitorInputStateEnable
EnabledStatus,
hwMonitorInputRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.5.25.31.1.1.4.1.1
hwMonitorInputIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Monitor port index.
This is a number of input line,ranging from 1 to 4.
"
::= { hwMonitorInputEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.4.1.2
hwMonitorInputName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Monitor line name.
"
::= { hwMonitorInputEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.4.1.3
hwMonitorInputState OBJECT-TYPE
SYNTAX HWLevelState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Monitor line status.
The value is high or low.
"
::= { hwMonitorInputEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.4.1.4
hwMonitorInputStateEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable monitor line.
"
::= { hwMonitorInputEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.4.1.5
hwMonitorInputRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of monitor input row.
"
::= { hwMonitorInputEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.5
hwMonitorOutputTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMonitorOutputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per replaceable unit physical entity.
This table is used to create a output view."
::= { hwEntityState 5 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.5.1
hwMonitorOutputEntry OBJECT-TYPE
SYNTAX HwMonitorOutputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a replaceable unit physical entity."
INDEX { hwMonitorOutputIndex, hwMonitorOutputRuleIndex }
::= { hwMonitorOutputTable 1 }
HwMonitorOutputEntry ::=
SEQUENCE {
hwMonitorOutputIndex
Integer32,
hwMonitorOutputRuleIndex
Integer32,
hwMonitorOutputMask
DisplayString,
hwMonitorOutputKey
DisplayString,
hwMonitorOutputRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.5.25.31.1.1.5.1.1
hwMonitorOutputIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Monitor output view index.
Through this index ,you can turn into the output view.
"
::= { hwMonitorOutputEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.5.1.2
hwMonitorOutputRuleIndex OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Monitor output rule index.
This is used to set the rules about all of the input line.
"
::= { hwMonitorOutputEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.5.1.3
hwMonitorOutputMask OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Monitor output mask .
This is used to matching the level of monitor input line.
"
::= { hwMonitorOutputEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.5.1.4
hwMonitorOutputKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Normal level value of this output line.
"
::= { hwMonitorOutputEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.5.1.5
hwMonitorOutputRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of monitor input row
"
::= { hwMonitorOutputEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.6
hwEntPowerUsedInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEntPowerUsedInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information that displays the power use of entity ."
::= { hwEntityState 6 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.6.1
hwEntPowerUsedInfoEntry OBJECT-TYPE
SYNTAX HwEntPowerUsedInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of the table of information that displays the power use of entity."
INDEX { entPhysicalIndex }
::= { hwEntPowerUsedInfoTable 1 }
HwEntPowerUsedInfoEntry ::=
SEQUENCE {
hwEntPowerUsedInfoBoardName
OCTET STRING,
hwEntPowerUsedInfoBoardType
OCTET STRING,
hwEntPowerUsedInfoBoardSlot
Integer32,
hwEntPowerUsedInfoPower
Integer32
}
-- 1.3.6.1.4.1.2011.5.25.31.1.1.6.1.1
hwEntPowerUsedInfoBoardName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Board name."
::= { hwEntPowerUsedInfoEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.6.1.2
hwEntPowerUsedInfoBoardType OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Board type."
::= { hwEntPowerUsedInfoEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.6.1.3
hwEntPowerUsedInfoBoardSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Board's slot number."
::= { hwEntPowerUsedInfoEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.6.1.4
hwEntPowerUsedInfoPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used power of board."
::= { hwEntPowerUsedInfoEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.7
hwVirtualCableTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVirtualCableTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains one row per replaceable unit physical entity.
This table is used to display VCT result."
::= { hwEntityState 7 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1
hwVirtualCableTestEntry OBJECT-TYPE
SYNTAX HwVirtualCableTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a replaceable unit physical entity."
INDEX { hwVirtualCableTestIfIndex }
::= { hwVirtualCableTestTable 1 }
HwVirtualCableTestEntry ::=
SEQUENCE {
hwVirtualCableTestIfIndex
InterfaceIndex,
hwVirtualCableTestPairStatus
INTEGER,
hwVirtualCableTestPairLength
Integer32,
hwVirtualCableTestOperation
INTEGER,
hwVirtualCableTestLastTime
Integer32,
hwVirtualCableTestPairAStatus
INTEGER,
hwVirtualCableTestPairBStatus
INTEGER,
hwVirtualCableTestPairCStatus
INTEGER,
hwVirtualCableTestPairDStatus
INTEGER,
hwVirtualCableTestPairALength
Integer32,
hwVirtualCableTestPairBLength
Integer32,
hwVirtualCableTestPairCLength
Integer32,
hwVirtualCableTestPairDLength
Integer32
}
-- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.1
hwVirtualCableTestIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IfIndex of port that you want to test cable."
::= { hwVirtualCableTestEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.2
hwVirtualCableTestPairStatus OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
abnormalOpen(2),
abnormalShort(3),
abnormalOpenShort(4),
abnormalCrossTalk(5),
unknown(6),
notSupport(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pair status.
This indicate the status of cable.
"
::= { hwVirtualCableTestEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.3
hwVirtualCableTestPairLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pair Length.
This indicate the length of cable.
"
::= { hwVirtualCableTestEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.4
hwVirtualCableTestOperation OBJECT-TYPE
SYNTAX INTEGER
{
startTest(1),
resetTestValue(2),
readyStartTest(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VirtualCableTestOperation.
This Operation of VirtualCableTest."
::= { hwVirtualCableTestEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.5
hwVirtualCableTestLastTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last test time for the entity. The mean of last time is
when the entity is tested, and the value of the object
will add one per seconds until now."
::= { hwVirtualCableTestEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.6
hwVirtualCableTestPairAStatus OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
abnormalOpen(2),
abnormalShort(3),
abnormalOpenShort(4),
abnormalCrossTalk(5),
unknown(6),
notSupport(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pair A status.
This indicate the status of cable.
"
::= { hwVirtualCableTestEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.7
hwVirtualCableTestPairBStatus OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
abnormalOpen(2),
abnormalShort(3),
abnormalOpenShort(4),
abnormalCrossTalk(5),
unknown(6),
notSupport(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pair B status.
This indicate the status of cable.
"
::= { hwVirtualCableTestEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.8
hwVirtualCableTestPairCStatus OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
abnormalOpen(2),
abnormalShort(3),
abnormalOpenShort(4),
abnormalCrossTalk(5),
unknown(6),
notSupport(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pair C status.
This indicate the status of cable.
"
::= { hwVirtualCableTestEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.9
hwVirtualCableTestPairDStatus OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
abnormalOpen(2),
abnormalShort(3),
abnormalOpenShort(4),
abnormalCrossTalk(5),
unknown(6),
notSupport(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pair D status.
This indicate the status of cable.
"
::= { hwVirtualCableTestEntry 9 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.10
hwVirtualCableTestPairALength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pair A Length.
This indicate the length of cable.
"
::= { hwVirtualCableTestEntry 10 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.11
hwVirtualCableTestPairBLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pair B Length.
This indicate the length of cable.
"
::= { hwVirtualCableTestEntry 11 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.12
hwVirtualCableTestPairCLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pair C Length.
This indicate the length of cable.
"
::= { hwVirtualCableTestEntry 12 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.13
hwVirtualCableTestPairDLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pair D Length.
This indicate the length of cable.
"
::= { hwVirtualCableTestEntry 13 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.8
hwTemperatureThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwTemperatureThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the alarm thresholds of temperature sensors.
You can read information about all the temperature sensors of the device.
You can set the alarm threshold of a specified temperature sensor. "
::= { hwEntityState 8 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1
hwTemperatureThresholdEntry OBJECT-TYPE
SYNTAX HwTemperatureThresholdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the hwTemperatureThresholdTable."
INDEX { hwEntityTempSlotId, hwEntityTempI2CId, hwEntityTempAddr, hwEntityTempChannel }
::= { hwTemperatureThresholdTable 1 }
HwTemperatureThresholdEntry ::=
SEQUENCE {
hwEntityTempSlotId
Integer32,
hwEntityTempI2CId
Integer32,
hwEntityTempAddr
Integer32,
hwEntityTempChannel
Integer32,
hwEntityTempStatus
INTEGER,
hwEntityTempValue
Integer32,
hwEntityTempMinorAlmThreshold
Integer32,
hwEntityTempMajorAlmThreshold
Integer32,
hwEntityTempFatalAlmThreshold
Integer32
}
-- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.1
hwEntityTempSlotId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the slot ID of a temperature sensor. "
::= { hwTemperatureThresholdEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.2
hwEntityTempI2CId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the I2CID of a temperature sensor. "
::= { hwTemperatureThresholdEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.3
hwEntityTempAddr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the address of a temperature sensor."
::= { hwTemperatureThresholdEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.4
hwEntityTempChannel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the channel of a temperature sensor. "
::= { hwTemperatureThresholdEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.5
hwEntityTempStatus OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
minor(2),
major(3),
fatal(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current status of a temperature sensor. "
::= { hwTemperatureThresholdEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.6
hwEntityTempValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current value in Celsius of a temperature sensor."
::= { hwTemperatureThresholdEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.7
hwEntityTempMinorAlmThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the threshold for a minor alarm. The value can be set and ranges from 80% to 120% of the default value. The value is in Celsius. "
::= { hwTemperatureThresholdEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.8
hwEntityTempMajorAlmThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the threshold for a major alarm. The value can be set and ranges from 80% to 120% of the default value. The value is in Celsius. "
::= { hwTemperatureThresholdEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.9
hwEntityTempFatalAlmThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the threshold for a fatal alarm. The value can be set and ranges from 80% to 120% of the default value. The value is in Celsius. "
::= { hwTemperatureThresholdEntry 9 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.9
hwVoltageInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVoltageInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists information about voltage sensors. You can read information about all the voltage sensors of the device. You can set the alarm threshold of a specified voltage sensor. "
::= { hwEntityState 9 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1
hwVoltageInfoEntry OBJECT-TYPE
SYNTAX HwVoltageInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the hwVoltageInfoTable."
INDEX { hwEntityVolSlot, hwEntityVolI2CId, hwEntityVolAddr, hwEntityVolChannel }
::= { hwVoltageInfoTable 1 }
HwVoltageInfoEntry ::=
SEQUENCE {
hwEntityVolSlot
Integer32,
hwEntityVolI2CId
Integer32,
hwEntityVolAddr
Integer32,
hwEntityVolChannel
Integer32,
hwEntityVolStatus
INTEGER,
hwEntityVolRequired
Integer32,
hwEntityVolCurValue
Integer32,
hwEntityVolRatio
Integer32,
hwEntityVolLowAlmMajor
Integer32,
hwEntityVolLowAlmFatal
Integer32,
hwEntityVolHighAlmMajor
Integer32,
hwEntityVolHighAlmFatal
Integer32
}
-- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.1
hwEntityVolSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the slot ID of a voltage sensor."
::= { hwVoltageInfoEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.2
hwEntityVolI2CId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the I2CID of a voltage sensor."
::= { hwVoltageInfoEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.3
hwEntityVolAddr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the address of a voltage sensor. "
::= { hwVoltageInfoEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.4
hwEntityVolChannel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the channel of a voltage sensor. "
::= { hwVoltageInfoEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.5
hwEntityVolStatus OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
major(2),
fatal(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current status of a voltage sensor."
::= { hwVoltageInfoEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.6
hwEntityVolRequired OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the nominal value in millivolt of a voltage sensor."
::= { hwVoltageInfoEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.7
hwEntityVolCurValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current value in millivolt of a voltage sensor."
::= { hwVoltageInfoEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.8
hwEntityVolRatio OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the voltage ratio of a voltage sensor."
::= { hwVoltageInfoEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.9
hwEntityVolLowAlmMajor OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the threshold for a major alarm of low voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt. "
::= { hwVoltageInfoEntry 9 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.10
hwEntityVolLowAlmFatal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the threshold for a fatal alarm of low voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt. "
::= { hwVoltageInfoEntry 10 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.11
hwEntityVolHighAlmMajor OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the threshold for a major alarm of high voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt. "
::= { hwVoltageInfoEntry 11 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.12
hwEntityVolHighAlmFatal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the threshold for a fatal alarm of high voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt. "
::= { hwVoltageInfoEntry 12 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.10
hwFanStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwFanStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the status of fans. You can read the status of the fans on the device."
::= { hwEntityState 10 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.10.1
hwFanStatusEntry OBJECT-TYPE
SYNTAX HwFanStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the hwFanStatusTable."
INDEX { hwEntityFanSlot, hwEntityFanSn }
::= { hwFanStatusTable 1 }
HwFanStatusEntry ::=
SEQUENCE {
hwEntityFanSlot
Integer32,
hwEntityFanSn
Integer32,
hwEntityFanReg
INTEGER,
hwEntityFanSpdAdjMode
INTEGER,
hwEntityFanSpeed
Integer32,
hwEntityFanPresent
INTEGER,
hwEntityFanState
INTEGER
}
-- 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.1
hwEntityFanSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the slot ID of a fan."
::= { hwFanStatusEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.2
hwEntityFanSn OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the serial number of the fan in a certain slot."
::= { hwFanStatusEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.3
hwEntityFanReg OBJECT-TYPE
SYNTAX INTEGER
{
yes(1),
no(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the fan is registered."
::= { hwFanStatusEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.4
hwEntityFanSpdAdjMode OBJECT-TYPE
SYNTAX INTEGER
{
auto(1),
manual(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the speed adjustment mode of the fan."
::= { hwFanStatusEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.5
hwEntityFanSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the rotation speed (in percentage of the full speed) of the fan. "
::= { hwFanStatusEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.6
hwEntityFanPresent OBJECT-TYPE
SYNTAX INTEGER
{
present(1),
absent(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the present information of the fan."
::= { hwFanStatusEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.7
hwEntityFanState OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
abnormal(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the state of the fan."
::= { hwFanStatusEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.11
hwEntityGlobalPara OBJECT IDENTIFIER ::= { hwEntityState 11 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.11.1
hwEntityServiceType OBJECT-TYPE
SYNTAX INTEGER
{
sslvpn(1),
firewall(2),
load-balance(3),
ipsec(4),
netstream(5),
wlan(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" It describes the service-type of spu board ."
::= { hwEntityGlobalPara 1 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.12
hwPortBip8StatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPortBip8StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the BIP8 statistics.
This table lists the various BIP8 statistics."
::= { hwEntityState 12 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.12.1
hwPortBip8StatisticsEntry OBJECT-TYPE
SYNTAX HwPortBip8StatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the BIP8 statistics.
This table lists the various BIP8 statistics."
INDEX { entPhysicalIndex }
::= { hwPortBip8StatisticsTable 1 }
HwPortBip8StatisticsEntry ::=
SEQUENCE{
hwPhysicalPortBip8StatisticsEB Counter64,
hwPhysicalPortBip8StatisticsES Counter64,
hwPhysicalPortBip8StatisticsSES Counter64,
hwPhysicalPortBip8StatisticsUAS Counter64,
hwPhysicalPortBip8StatisticsBBE Counter64,
hwPhysicalPortSpeed Unsigned32
}
-- 1.3.6.1.4.1.2011.5.25.31.1.1.12.1.1
hwPhysicalPortBip8StatisticsEB OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BIP8 Statistics: EB(Errored Block)."
::= { hwPortBip8StatisticsEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.12.1.2
hwPhysicalPortBip8StatisticsES OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BIP8 Statistics: ES(Errored Second)."
::= { hwPortBip8StatisticsEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.12.1.3
hwPhysicalPortBip8StatisticsSES OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BIP8 Statistics: SES(Severely Errored Second)."
::= { hwPortBip8StatisticsEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.12.1.4
hwPhysicalPortBip8StatisticsUAS OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BIP8 Statistics: UAS(Unavailable Errored Second)."
::= { hwPortBip8StatisticsEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.12.1.5
hwPhysicalPortBip8StatisticsBBE OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BIP8 Statistics: BBE(Background Block Error)."
::= { hwPortBip8StatisticsEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.31.1.1.12.1.6
hwPhysicalPortSpeed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the interface's current bandwidth in
1000000 bits per second."
::= { hwPortBip8StatisticsEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.31.2
hwEntityExtTraps OBJECT IDENTIFIER ::= { hwEntityExtentMIB 2 }
-- 1.3.6.1.4.1.2011.5.25.31.2.0
hwEntityExtTrapsPrefix OBJECT IDENTIFIER ::= { hwEntityExtTraps 0 }
-- 1.3.6.1.4.1.2011.5.25.31.2.0.1
hwEntityExtTemperatureThresholdNotification NOTIFICATION-TYPE
OBJECTS { hwEntityTemperature, hwEntityTemperatureThreshold, hwEntityAdminStatus, hwEntityAlarmLight }
STATUS current
DESCRIPTION
" The hwEntityEnvTemperatureThresholdNotification
indicates the temperature have been exceed the threshold.
In the condition, user should check the hardware and the
environment of the entity, sometimes it happened because
of the failture of air-condition. Anyway, the threshold
should lower than the value that most service work fine. "
::= { hwEntityExtTrapsPrefix 1 }
-- 1.3.6.1.4.1.2011.5.25.31.2.0.2
hwEntityExtVoltageLowThresholdNotification NOTIFICATION-TYPE
OBJECTS { hwEntityVoltage, hwEntityVoltageLowThreshold, hwEntityAdminStatus, hwEntityAlarmLight }
STATUS current
DESCRIPTION
" The hwEntityExtVoltageLowThresholdNotification indicates
the voltage is lower than the threshold. This may decrease
the usability of the entity. If the voltage is lower too much
than the hardware needed, the entity will stop working.
Anyway, the threshold should higher than the value that
most service work fine. "
::= { hwEntityExtTrapsPrefix 2 }
-- 1.3.6.1.4.1.2011.5.25.31.2.0.3
hwEntityExtVoltageHighThresholdNotification NOTIFICATION-TYPE
OBJECTS { hwEntityVoltage, hwEntityVoltageHighThreshold, hwEntityAdminStatus, hwEntityAlarmLight }
STATUS current
DESCRIPTION
" The hwEntityExtVoltageHighThresholdNotification indicates
the voltage is higher than the threshold. This may decrease
the usability of the entity. If the voltage is higher too much
than the hardware needed, the entity may be destroyed by the high
voltage. Anyway, the threshold should lower than the value
that most service work fine. "
::= { hwEntityExtTrapsPrefix 3 }
-- 1.3.6.1.4.1.2011.5.25.31.2.0.4
hwEntityExtCpuUsageThresholdNotfication NOTIFICATION-TYPE
OBJECTS { hwEntityCpuUsage, hwEntityCpuUsageThreshold, hwEntityTemperature, hwEntityTemperatureThreshold, hwEntityAdminStatus,
hwEntityAlarmLight }
STATUS current
DESCRIPTION
" The hwEntityExtCpuUsageThresholdNotfication indicates
the entity is overload, and the service running in the entity
will not get the performance it should because of CPU's
performance. Anyway, the threshold should lower than the
value that most service work fine. "
::= { hwEntityExtTrapsPrefix 4 }
-- 1.3.6.1.4.1.2011.5.25.31.2.0.5
hwEntityExtMemUsageThresholdNotification NOTIFICATION-TYPE
OBJECTS { hwEntityMemUsage, hwEntityMemUsageThreshold, hwEntityMemSize, hwEntityAdminStatus, hwEntityAlarmLight
}
STATUS current
DESCRIPTION
" The hwEntityExtMemUsageThresholdNotification indicates
the entity is overload, and the service running in the entity
will not get the performance it should because of lower
memory. Anyway, the threshold should lower than the
value that most service work fine. "
::= { hwEntityExtTrapsPrefix 5 }
-- 1.3.6.1.4.1.2011.5.25.31.2.0.6
hwEntityExtOperEnabled NOTIFICATION-TYPE
OBJECTS { hwEntityAdminStatus, hwEntityAlarmLight }
STATUS current
DESCRIPTION
"The entity is operational. The entity this
notification refers can be identified by
extracting the entPhysicalIndex from one of the
variable bindings."
::= { hwEntityExtTrapsPrefix 6 }
-- 1.3.6.1.4.1.2011.5.25.31.2.0.7
hwEntityExtOperDisabled NOTIFICATION-TYPE
OBJECTS { hwEntityAdminStatus, hwEntityAlarmLight }
STATUS current
DESCRIPTION
"The entity is operational. The entity this
notification refers can be identified by
extracting the entPhysicalIndex from one of the
variable bindings."
::= { hwEntityExtTrapsPrefix 7 }
-- 1.3.6.1.4.1.2011.5.25.31.2.0.8
hwEntityExtMonitorBoardAbnormalNotification NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The monitor board turns normal to abnormal."
::= { hwEntityExtTrapsPrefix 8 }
-- 1.3.6.1.4.1.2011.5.25.31.2.0.9
hwEntityExtMonitorBoardNormalNotification NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The monitor board turns abnormal to normal."
::= { hwEntityExtTrapsPrefix 9 }
-- 1.3.6.1.4.1.2011.5.25.31.2.0.10
hwEntityExtMonitorPortAbnormalNotification NOTIFICATION-TYPE
OBJECTS { hwMonitorInputState, hwMonitorInputName }
STATUS current
DESCRIPTION
"The monitor port turns normal to abnormal."
::= { hwEntityExtTrapsPrefix 10 }
-- 1.3.6.1.4.1.2011.5.25.31.2.0.11
hwEntityExtMonitorPortNormalNotification NOTIFICATION-TYPE
OBJECTS { hwMonitorInputState, hwMonitorInputName }
STATUS current
DESCRIPTION
"The monitor port turns abnormal to normal."
::= { hwEntityExtTrapsPrefix 11 }
-- 1.3.6.1.4.1.2011.5.25.31.2.0.12
hwEntityExtCpuUsageLowThresholdNotfication NOTIFICATION-TYPE
OBJECTS { hwEntityCpuUsage, hwEntityCpuUsageThreshold, hwEntityTemperature, hwEntityTemperatureThreshold, hwEntityAdminStatus,
hwEntityAlarmLight }
STATUS current
DESCRIPTION
" The hwEntityExtCpuUsageThresholdNotfication indicates
the entity is overload, and the service running in the entity
will not get the performance it should because of CPU's
performance. Anyway, the threshold should lower than the
value that most service work fine. "
::= { hwEntityExtTrapsPrefix 12 }
-- 1.3.6.1.4.1.2011.5.25.31.3
hwDevicePowerInfoObjects OBJECT IDENTIFIER ::= { hwEntityExtentMIB 3 }
-- 1.3.6.1.4.1.2011.5.25.31.3.1
hwDevicePowerInfoTotalPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device total power."
::= { hwDevicePowerInfoObjects 1 }
-- 1.3.6.1.4.1.2011.5.25.31.3.2
hwDevicePowerInfoUsedPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device used power."
::= { hwDevicePowerInfoObjects 2 }
-- 1.3.6.1.4.1.2011.5.25.31.4
hwEntityExtConformance OBJECT IDENTIFIER ::= { hwEntityExtentMIB 4 }
-- 1.3.6.1.4.1.2011.5.25.31.4.1
hwEntityExtCompliances OBJECT IDENTIFIER ::= { hwEntityExtConformance 1 }
-- 1.3.6.1.4.1.2011.5.25.31.4.1.1
hwEntityExtCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for systems supporting
the HUAWEI Entity extent MIB."
MODULE -- this module
MANDATORY-GROUPS { hwEntityExtGroup }
OBJECT hwEntityAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT hwEntityCpuUsageThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT hwEntityMemUsageThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT hwEntityTemperatureThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT hwEntityVoltageLowThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT hwEntityVoltageHighThreshold
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { hwEntityExtCompliances 1 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2
hwEntityExtGroups OBJECT IDENTIFIER ::= { hwEntityExtConformance 2 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2.1
hwEntityExtGroup OBJECT-GROUP
OBJECTS { hwEntityAdminStatus, hwEntityOperStatus, hwEntityStandbyStatus, hwEntityAlarmLight, hwEntityCpuUsage,
hwEntityCpuUsageThreshold, hwEntityMemUsage, hwEntityMemUsageThreshold, hwEntityMemSize, hwEntityUpTime,
hwEntityTemperature, hwEntityTemperatureThreshold, hwEntityVoltage, hwEntityVoltageLowThreshold, hwEntityVoltageHighThreshold,
hwEntityTemperatureLowThreshold, hwEntityOpticalPower, hwEntityCurrent, hwEntityMemSizeMega, hwEntityPortType,
hwEntityDuplex, hwEntityOpticalPowerRx, hwEntityCpuUsageLowThreshold, hwEntityBoardPower, hwEntityCpuFrequency,
hwEntitySupportFlexCard, hwEntityBoardClass, hwNseOpmStatus, hwEntityCpuMaxUsage, hwEntityServiceType,
hwEntityCPUType, hwEntityMemoryType, hwEntityFlashSize, hwEntityIfUpTimes, hwEntityIfDownTimes,
hwEntityCPUAvgUsage, hwEntityMemoryAvgUsage }
STATUS current
DESCRIPTION
"Standard HUAWEI Entity Extent group."
::= { hwEntityExtGroups 1 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2.2
hwEntityExtNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwEntityExtTemperatureThresholdNotification, hwEntityExtVoltageLowThresholdNotification, hwEntityExtVoltageHighThresholdNotification, hwEntityExtCpuUsageThresholdNotfication, hwEntityExtMemUsageThresholdNotification,
hwEntityExtOperEnabled, hwEntityExtOperDisabled, hwEntityExtMonitorBoardAbnormalNotification, hwEntityExtMonitorBoardNormalNotification, hwEntityExtMonitorPortAbnormalNotification,
hwEntityExtMonitorPortNormalNotification, hwEntityExtCpuUsageLowThresholdNotfication }
STATUS current
DESCRIPTION
"Standard HUAWEI Entity Extent Notification group."
::= { hwEntityExtGroups 2 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2.3
hwRUModuleInfoGroup OBJECT-GROUP
OBJECTS { hwEntityBomId, hwEntityBomEnDesc, hwEntityManufacturedDate, hwEntityCLEICode, hwEntityArchivesInfoVersion,
hwEntityOpenBomId, hwEntityIssueNum, hwEntityBoardType }
STATUS current
DESCRIPTION
"Standard HUAWEI Entity Extent group."
::= { hwEntityExtGroups 3 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2.4
hwEntityExtOldObjectsGroup OBJECT-GROUP
OBJECTS { hwEntityBomLocalDesc, hwEntityManufactureCode, hwEntityUpdateLog }
STATUS obsolete
DESCRIPTION
"Group for old objects that may be obsoleted."
::= { hwEntityExtGroups 4 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2.5
hwOpticalModuleInfoGroup OBJECT-GROUP
OBJECTS { hwEntityOpticalMode, hwEntityOpticalWaveLength, hwEntityOpticalTransDistance, hwEntityOpticalVendorSn, hwEntityOpticalTemperature,
hwEntityOpticalVoltage, hwEntityOpticalBiasCurrent, hwEntityOpticalRxPower, hwEntityOpticalTxPower, hwEntityOpticalType,
hwEntityOpticalTransBW, hwEntityOpticalFiberType, hwEntityOpticalRxLowThreshold, hwEntityOpticalRxHighThreshold, hwEntityOpticalTxLowThreshold,
hwEntityOpticalTxHighThreshold, hwEntityOpticalPlug, hwEntityOpticalDirectionType, hwEntityOpticalUserEeprom }
STATUS current
DESCRIPTION
"Collection of objects that display the fiber module working information."
::= { hwEntityExtGroups 5 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2.6
hwMonitorInputGroup OBJECT-GROUP
OBJECTS { hwMonitorInputName, hwMonitorInputState, hwMonitorInputStateEnable, hwMonitorInputRowStatus }
STATUS current
DESCRIPTION
"Standard HUAWEI Entity Extent group."
::= { hwEntityExtGroups 6 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2.7
hwMonitorOutputGroup OBJECT-GROUP
OBJECTS { hwMonitorOutputMask, hwMonitorOutputKey, hwMonitorOutputRowStatus }
STATUS current
DESCRIPTION
"Standard HUAWEI Entity Extent group."
::= { hwEntityExtGroups 7 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2.8
hwEntPowerUsedInfoGroup OBJECT-GROUP
OBJECTS { hwEntPowerUsedInfoBoardName, hwEntPowerUsedInfoBoardType, hwEntPowerUsedInfoBoardSlot, hwEntPowerUsedInfoPower }
STATUS current
DESCRIPTION
"Collection of objects that display the power informations of entity."
::= { hwEntityExtGroups 8 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2.9
hwDevicePowerInfoGroup OBJECT-GROUP
OBJECTS { hwDevicePowerInfoTotalPower, hwDevicePowerInfoUsedPower }
STATUS current
DESCRIPTION
"Collection of objects that display the power informations of device."
::= { hwEntityExtGroups 9 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2.10
hwVirtualCableTestGroup OBJECT-GROUP
OBJECTS { hwVirtualCableTestPairStatus, hwVirtualCableTestPairLength, hwVirtualCableTestOperation, hwVirtualCableTestLastTime,
hwVirtualCableTestPairAStatus,hwVirtualCableTestPairBStatus,hwVirtualCableTestPairCStatus,hwVirtualCableTestPairDStatus,
hwVirtualCableTestPairALength,hwVirtualCableTestPairBLength,hwVirtualCableTestPairCLength,hwVirtualCableTestPairDLength}
STATUS current
DESCRIPTION
"Collection of objects that display the status of cable."
::= { hwEntityExtGroups 10 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2.11
hwTemperatureThresholdGroup OBJECT-GROUP
OBJECTS { hwEntityTempSlotId, hwEntityTempI2CId, hwEntityTempAddr, hwEntityTempChannel, hwEntityTempStatus,
hwEntityTempValue, hwEntityTempMinorAlmThreshold, hwEntityTempMajorAlmThreshold, hwEntityTempFatalAlmThreshold }
STATUS current
DESCRIPTION
"Temperature threshold group."
::= { hwEntityExtGroups 11 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2.12
hwVoltageInfoGroup OBJECT-GROUP
OBJECTS { hwEntityVolSlot, hwEntityVolI2CId, hwEntityVolAddr, hwEntityVolChannel, hwEntityVolStatus,
hwEntityVolRequired, hwEntityVolLowAlmMajor, hwEntityVolLowAlmFatal, hwEntityVolHighAlmMajor, hwEntityVolHighAlmFatal,
hwEntityVolCurValue, hwEntityVolRatio }
STATUS current
DESCRIPTION
"Voltage info group."
::= { hwEntityExtGroups 12 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2.13
hwFanStatusGroup OBJECT-GROUP
OBJECTS { hwEntityFanSlot, hwEntityFanSn, hwEntityFanReg, hwEntityFanSpdAdjMode, hwEntityFanSpeed,hwEntityFanPresent,hwEntityFanState
}
STATUS current
DESCRIPTION
"fan state group."
::= { hwEntityExtGroups 13 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2.14
hwPnpGroup OBJECT-GROUP
OBJECTS { hwHardwareCapaSequenceNo, hwFileGeneIndex, hwFileGeneResourceType, hwFileGeneResourceID, hwFileGeneDestinationFile,
hwFileGeneOperState, hwFileGeneRowStatus }
STATUS current
DESCRIPTION
"Pnp group."
::= { hwEntityExtGroups 14 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2.15
hwSystemGlobalGroup OBJECT-GROUP
OBJECTS { hwEntitySystemNetID, hwEntitySoftwareName, hwEntitySoftwareVersion, hwEntitySoftwareVendor, hwEntitySystemModel,
hwEntitySystemTime, hwEntitySystemMacAddress, hwEntitySystemReset, hwEntitySystemHealthInterval, hwEntitySystemNEId }
STATUS current
DESCRIPTION
"System global group."
::= { hwEntityExtGroups 15 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2.16
hwHeartbeatGroup OBJECT-GROUP
OBJECTS { hwEntityHeartbeatOnOff, hwEntityHeartbeatPeriod, hwEntityHeartbeatTrap }
STATUS current
DESCRIPTION
"Heart beat group."
::= { hwEntityExtGroups 16 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2.17
hwPortBip8StatisticsObjectGroup OBJECT-GROUP
OBJECTS{ hwPhysicalPortBip8StatisticsEB, hwPhysicalPortBip8StatisticsES, hwPhysicalPortBip8StatisticsSES,
hwPhysicalPortBip8StatisticsUAS, hwPhysicalPortBip8StatisticsBBE }
STATUS current
DESCRIPTION
"The BIP8 statistics group."
::= { hwEntityExtGroups 17 }
-- 1.3.6.1.4.1.2011.5.25.31.4.2.18
hwPredisposeGroup OBJECT-GROUP
OBJECTS { hwPreDisposeSequenceNo, hwDisposeSlot, hwDisposeCardId, hwDisposeSbom,
hwDisposeRowStatus, hwDisposeOperState, hwDisposeEntPhysicalIndex, hwDisposeEntPhysicalDescr, hwDisposeEntPhysicalVendorType,
hwDisposeEntPhysicalContainedIn, hwDisposeEntPhysicalClass, hwDisposeEntPhysicalParentRelPos, hwDisposeEntPhysicalName }
STATUS current
DESCRIPTION
"Pnp group."
::= { hwEntityExtGroups 18 }
-- 1.3.6.1.4.1.2011.5.25.31.5
hwPnpObjects OBJECT IDENTIFIER ::= { hwEntityExtentMIB 5 }
-- 1.3.6.1.4.1.2011.5.25.31.5.1
hwPnpInfo OBJECT IDENTIFIER ::= { hwPnpObjects 1 }
-- 1.3.6.1.4.1.2011.5.25.31.5.1.1
hwHardwareCapaSequenceNo OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the sequence number of the 'hardware capability file'.The value consists of the file version number and CRC code."
::= { hwPnpInfo 1 }
-- 1.3.6.1.4.1.2011.5.25.31.5.2
hwPnpTraps OBJECT IDENTIFIER ::= { hwPnpObjects 2 }
-- 1.3.6.1.4.1.2011.5.25.31.5.2.1
hwHardwareCapaChangeNotification NOTIFICATION-TYPE
OBJECTS { hwHardwareCapaSequenceNo }
STATUS current
DESCRIPTION
"This object indicates the change of the 'hardware capability file'. An alarm is generated if the sequence number of the 'hardware capability file' in the current startup file is different from that in the last startup file."
::= { hwPnpTraps 1 }
-- 1.3.6.1.4.1.2011.5.25.31.5.3
hwPnpOperateTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPnpOperateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the hardware functions. Using this table, you can obtain the specified 'hardware description file' or 'hardware capability file'."
::= { hwPnpObjects 3 }
-- 1.3.6.1.4.1.2011.5.25.31.5.3.1
hwPnpOperateEntry OBJECT-TYPE
SYNTAX HwPnpOperateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " "
INDEX { hwFileGeneIndex }
::= { hwPnpOperateTable 1 }
HwPnpOperateEntry ::=
SEQUENCE {
hwFileGeneIndex
Integer32,
hwFileGeneOperState
INTEGER,
hwFileGeneResourceType
INTEGER,
hwFileGeneResourceID
SnmpAdminString,
hwFileGeneDestinationFile
SnmpAdminString,
hwFileGeneRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.5.25.31.5.3.1.1
hwFileGeneIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object identifies the operation index, which can be specified by the user.
The value ranges from 1 to 2147483647."
::= { hwPnpOperateEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.31.5.3.1.2
hwFileGeneOperState OBJECT-TYPE
SYNTAX INTEGER
{
opInProgress(1),
opSuccess(2),
opGetFileError(3),
opInvalidDestName(4),
opNoFlashSpace(5),
opWriteFileError(6),
opDestoryError(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the operation status.
opInProgress(1): The operation is ongoing.
opSuccess(2): The operation succeeds.
opGetFileError(3): Obtaining the file fails.
opInvalidDestName(4): The specified storage path is invalid.
opNoFlashSpace(5): The space in the flash memory is insufficient.
opWriteFileError(6): Writing the file fails.
opDestoryError(7): Deleting the file fails."
::= { hwPnpOperateEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.31.5.3.1.3
hwFileGeneResourceType OBJECT-TYPE
SYNTAX INTEGER
{
pnpcard(1),
pnpsubcard(2),
pnphardcapability(3),
pnpPreDisposeCapability(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the type of the file to be obtained.
pnpcard(1): board description file
pnpcard(2): subcard description file
pnphardcapability(3): hardware capability file
pnpPreDisposeCapability(4): predispose capability file"
::= { hwPnpOperateEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.31.5.3.1.4
hwFileGeneResourceID OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the ID of the 'hardware capability file' to be obtained."
::= { hwPnpOperateEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.31.5.3.1.5
hwFileGeneDestinationFile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the target path storing the file, which does not need to be specified."
::= { hwPnpOperateEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.31.5.3.1.6
hwFileGeneRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the row status.
active(1)
notInService(2)
notReady(3)
createAndGo(4)
createAndWait(5)
destroy(6)"
::= { hwPnpOperateEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.31.6
hwSystemGlobalObjects OBJECT IDENTIFIER ::= { hwEntityExtentMIB 6 }
-- 1.3.6.1.4.1.2011.5.25.31.6.1
hwEntitySystemNetID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Network element ID."
::= { hwSystemGlobalObjects 1 }
-- 1.3.6.1.4.1.2011.5.25.31.6.2
hwEntitySoftwareName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"System software name."
::= { hwSystemGlobalObjects 2 }
-- 1.3.6.1.4.1.2011.5.25.31.6.3
hwEntitySoftwareVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Software version number. "
::= { hwSystemGlobalObjects 3 }
-- 1.3.6.1.4.1.2011.5.25.31.6.4
hwEntitySoftwareVendor OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Software vendor."
::= { hwSystemGlobalObjects 4 }
-- 1.3.6.1.4.1.2011.5.25.31.6.5
hwEntitySystemModel OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device model."
::= { hwSystemGlobalObjects 5 }
-- 1.3.6.1.4.1.2011.5.25.31.6.6
hwEntitySystemTime OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"System time displayed on the device."
::= { hwSystemGlobalObjects 6 }
-- 1.3.6.1.4.1.2011.5.25.31.6.7
hwEntitySystemMacAddress OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the device."
::= { hwSystemGlobalObjects 7 }
-- 1.3.6.1.4.1.2011.5.25.31.6.8
hwEntitySystemReset OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
restart(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"System reset."
::= { hwSystemGlobalObjects 8 }
-- 1.3.6.1.4.1.2011.5.25.31.6.9
hwEntitySystemHealthInterval OBJECT-TYPE
SYNTAX Integer32 (5..900)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Statistical interval for average CPU and memory usage, in seconds (By default, the value is 300) ."
::= { hwSystemGlobalObjects 9 }
-- 1.3.6.1.4.1.2011.5.25.31.6.10
hwEntitySystemNEId OBJECT-TYPE
SYNTAX Integer32 (0..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Systme NEId."
::= { hwSystemGlobalObjects 10 }
-- 1.3.6.1.4.1.2011.5.25.31.7
hwHeartbeatObjects OBJECT IDENTIFIER ::= { hwEntityExtentMIB 7 }
-- 1.3.6.1.4.1.2011.5.25.31.7.1
hwHeartbeatConfig OBJECT IDENTIFIER ::= { hwHeartbeatObjects 1 }
-- 1.3.6.1.4.1.2011.5.25.31.7.1.1
hwEntityHeartbeatOnOff OBJECT-TYPE
SYNTAX INTEGER
{
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether Heartbeat sending periodically enabled."
::= { hwHeartbeatConfig 1 }
-- 1.3.6.1.4.1.2011.5.25.31.7.1.2
hwEntityHeartbeatPeriod OBJECT-TYPE
SYNTAX Integer32 (60..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Heartbeat sending period detected in the trap reporting channel, with the minimum value of 60 seconds."
::= { hwHeartbeatConfig 2 }
-- 1.3.6.1.4.1.2011.5.25.31.7.2
hwHeartbeatTrapPrefix OBJECT IDENTIFIER ::= { hwHeartbeatObjects 2 }
-- 1.3.6.1.4.1.2011.5.25.31.7.2.1
hwEntityHeartbeatTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Heartbeat trap."
::= { hwHeartbeatTrapPrefix 1 }
-- 1.3.6.1.4.1.2011.5.25.31.8
hwPreDisposeObjects OBJECT IDENTIFIER ::= { hwEntityExtentMIB 8 }
-- 1.3.6.1.4.1.2011.5.25.31.8.1
hwPreDisposeInfo OBJECT IDENTIFIER ::= { hwPreDisposeObjects 1 }
-- 1.3.6.1.4.1.2011.5.25.31.8.1.1
hwPreDisposeSequenceNo OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the sequence number of the 'predispose capability file'.The value consists of the file version number and CRC code."
::= { hwPreDisposeInfo 1 }
-- 1.3.6.1.4.1.2011.5.25.31.8.2
hwPreDisposedTraps OBJECT IDENTIFIER ::= { hwPreDisposeObjects 2 }
-- 1.3.6.1.4.1.2011.5.25.31.8.2.1
hwInsertDiffFromPreDisposed NOTIFICATION-TYPE
OBJECTS { hwDisposeEntPhysicalIndex, hwDisposeEntPhysicalVendorType, entPhysicalVendorType }
STATUS current
DESCRIPTION
"This object indicates the type of the inserted entity is different from that of pre-disposed entity on the slot."
::= { hwPreDisposedTraps 1 }
-- 1.3.6.1.4.1.2011.5.25.31.8.2.2
hwPreDisposedChangeNotification NOTIFICATION-TYPE
OBJECTS { hwPreDisposeSequenceNo }
STATUS current
DESCRIPTION
"This object indicates the change of the 'predispose capability file'. An alarm is generated if the sequence number of the 'predispose capability file' in the current startup file is different from that in the last startup file."
::= { hwPreDisposedTraps 2 }
-- 1.3.6.1.4.1.2011.5.25.31.8.3
hwPreDisposeConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPreDisposeConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of predisposing boards or flexible subcards."
::= { hwPreDisposeObjects 3 }
-- 1.3.6.1.4.1.2011.5.25.31.8.3.1
hwPreDisposeConfigEntry OBJECT-TYPE
SYNTAX HwPreDisposeConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of the table to predispose boards or flexible subcards."
INDEX { hwDisposeSlot, hwDisposeCardId }
::= { hwPreDisposeConfigTable 1 }
HwPreDisposeConfigEntry ::=
SEQUENCE {
hwDisposeSlot
Integer32,
hwDisposeCardId
Integer32,
hwDisposeSbom
OCTET STRING,
hwDisposeRowStatus
RowStatus,
hwDisposeOperState
INTEGER
}
-- 1.3.6.1.4.1.2011.5.25.31.8.3.1.1
hwDisposeSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the slot ID of predisposed board. "
::= { hwPreDisposeConfigEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.31.8.3.1.2
hwDisposeCardId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the card ID of predisposed subcard. "
::= { hwPreDisposeConfigEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.31.8.3.1.3
hwDisposeSbom OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the sbom information of predisposed board or subcard. "
::= { hwPreDisposeConfigEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.31.8.3.1.4
hwDisposeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the row status when config predispose.
active(1)
notInService(2)
notReady(3)
createAndGo(4)
createAndWait(5)
destroy(6)"
::= { hwPreDisposeConfigEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.31.8.3.1.5
hwDisposeOperState OBJECT-TYPE
SYNTAX INTEGER
{
opSuccess(1),
opInProgress(2),
opDevNotSupportPredispose(3),
opCardNotSupportPredispose(4),
opAlreadyPredispose(5),
opCardConflict(6),
opDevOperationError(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the operation status.
opSuccess(1): The operation succeeds.
opInProgress(2): The operation is ongoing.
opDevNotSupportPredispose(3): The device does not support predispose.
opCardNotSupportPredispose(4): The type of card or subcard is not supported to be predisposed on this device.
opAlreadyPredispose(5): The slot or subslot has already been predisposed.
opCardConflict(6): The slot or subslot to be predisposed conflict with others.
opDevOperationError(7): Other error occurs on the device."
::= { hwPreDisposeConfigEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.31.8.4
hwPreDisposeEntInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPreDisposeEntInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to get the information of predisposed entitys."
::= { hwPreDisposeObjects 4 }
-- 1.3.6.1.4.1.2011.5.25.31.8.4.1
hwPreDisposeEntInfoEntry OBJECT-TYPE
SYNTAX HwPreDisposeEntInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of the table to get the information of predisposed entitys."
INDEX { hwDisposeEntPhysicalIndex }
::= { hwPreDisposeEntInfoTable 1 }
HwPreDisposeEntInfoEntry ::=
SEQUENCE {
hwDisposeEntPhysicalIndex PhysicalIndex,
hwDisposeEntPhysicalDescr SnmpAdminString,
hwDisposeEntPhysicalVendorType AutonomousType,
hwDisposeEntPhysicalContainedIn Integer32,
hwDisposeEntPhysicalClass PhysicalClass,
hwDisposeEntPhysicalParentRelPos Integer32,
hwDisposeEntPhysicalName SnmpAdminString
}
-- 1.3.6.1.4.1.2011.5.25.31.8.4.1.1
hwDisposeEntPhysicalIndex OBJECT-TYPE
SYNTAX PhysicalIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index for this entry."
::= { hwPreDisposeEntInfoEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.31.8.4.1.2
hwDisposeEntPhysicalDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of predisposed physical entity.This object
should contain a string which identifies the manufacturer's
name for the physical entity. "
::= { hwPreDisposeEntInfoEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.31.8.4.1.3
hwDisposeEntPhysicalVendorType OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of the vendor-specific hardware type of the
predisposed physical entity.
"
::= { hwPreDisposeEntInfoEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.31.8.4.1.4
hwDisposeEntPhysicalContainedIn OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of 'entPhysicalContainedIn' for the predisposed physical entity."
::= { hwPreDisposeEntInfoEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.31.8.4.1.5
hwDisposeEntPhysicalClass OBJECT-TYPE
SYNTAX PhysicalClass
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of the general hardware type of the predisposed physical entity."
::= { hwPreDisposeEntInfoEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.31.8.4.1.6
hwDisposeEntPhysicalParentRelPos OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of the relative position of this 'child' component among all its 'sibling' components."
::= { hwPreDisposeEntInfoEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.31.8.4.1.7
hwDisposeEntPhysicalName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The textual name of the predisposed physical entity."
::= { hwPreDisposeEntInfoEntry 7 }
END
--
-- HUAWEI-ENTITY-EXTENT-MIB.mib
--
View Git Blame Copy Permalink