Use focal/core20/Ussuri/OVN & enable confinement

Major changes:

* Plumbing necessary for strict confinement with
  the microstack-support interface
  https://github.com/snapcore/snapd/pull/8926
  * Until the interface is merged, devmode will be used and kernel
    modules will be loaded via an auxiliary service.
* upgraded OpenStack components to Focal (20.04) and OpenStack Ussuri;
  * reworked the old patches;
  * added the Placement service since it is now separate;
  * addressed various build issues due to changes in snapcraft and
    built dependencies:
    * e.g. libvirt requires the build directory to be separate from the
      source directory) and LP: #1882255;
    * LP: #1882535 and https://github.com/pypa/pip/issues/8414
    * LP: #1882839
    * LP: #1885294
    * https://storyboard.openstack.org/#!/story/2007806
    * LP: #1864589
    * LP: #1777121
    * LP: #1881590
* ML2/OVS replated with ML2/OVN;
  * dnsmasq is not used anymore;
  * neutron l3 and DHCP agents are not used anymore;
  * Linux network namespaces are only used for
    neutron-ovn-metadata-agent.
  * ML2 DNS support is done via native OVN mechanisms;
  * OVN-related database services (southbound and northbound dbs);
  * OVN-related control plane services (ovn-controller, ovn-northd);
* core20 base support (bionic hosts are supported);
* the removal procedure now relies on the "remove" hook since `snap
remove` cannot be used from the confined environment anymore;
* prerequisites to enabling AppArmor confinement for QEMU processes
  created by the confined libvirtd.
* Added the Spice html5 console proxy service to enable clients to
  retrieve and use it via
  `microstack.openstack console url show --spice <servername>`.
* Added missing Cinder templates and DB migrations for the Cinder DB.
* Added experimental support for a loop device-based LVM backend for
  Cinder. Due to LP: #1892895 this is not recommended to be used in
  production except for tempest testing with an applied workaround;
  * includes iscsid and iscsi-tcp kernel module loading;
  * includes LIO and loading of relevant kernel modules;
  * An LVM PV is created on top of a loop device with a backing file
  present in $SNAP_COMMON/cinder-lvm.img;
  * A VG is created on top of the PV;
  * LVs are created by Cinder and exported via LIO over iscsi to iscsid
  which hot-plugs new SCSI devices. Those SCSI devices are then
  propagated by Nova to libvirt and QEMU during volume attachment;
* Added post-deployment testing via rally and tempest (via the
  microstack-test snap). A set of tests included into Refstack 2018.02
  is executed (except for object storage tests due to the lack of object
  storage support).

Change-Id: Ic70770095860a57d5e0a55a8a9451f9db6be7448

patches/horizon/0001-Use-SNAP_COMMON-paths.patch

@@ -1,18 +1,18 @@
-From 4d90b94a0a4ce3e7e69507c2c25a6981336c66a1 Mon Sep 17 00:00:00 2001
+From 36c45710c8cc3bbdf86fe2513a07a0d5f0a5c3f9 Mon Sep 17 00:00:00 2001
-From: Pete Vander Giessen <pete.vandergiessen@canonical.com>
+From: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
-Date: Thu, 19 Sep 2019 13:18:50 +0000
+Date: Mon, 8 Jun 2020 13:56:20 +0000
-Subject: [PATCH] Added SNAP_COMMON pathing
+Subject: [PATCH] Use SNAP_COMMON paths
 
 ---
- lib/python3.6/site-packages/openstack_dashboard/local/local_settings.py | 4 +++-
+ openstack_dashboard/local/local_settings.py         | 4 +++-
  openstack_dashboard/settings.py                     | 6 ++++--
  2 files changed, 7 insertions(+), 3 deletions(-)
 
-diff --git a/lib/python3.6/site-packages/openstack_dashboard/local/local_settings.py b/lib/python3.6/site-packages/openstack_dashboard/local/local_settings.py
+diff --git a/lib/python3.8/site-packages/openstack_dashboard/local/local_settings.py b/lib/python3.8/site-packages/openstack_dashboard/local/local_settings.py
-index 5f1ab10cc..cef4e9485 100644
+index 2b084bf24..aad403c04 100644
---- a/lib/python3.6/site-packages/openstack_dashboard/local/local_settings.py
+--- a/lib/python3.8/site-packages/openstack_dashboard/local/local_settings.py
-+++ b/lib/python3.6/site-packages/openstack_dashboard/local/local_settings.py
++++ b/lib/python3.8/site-packages/openstack_dashboard/local/local_settings.py
-@@ -10,6 +10,8 @@ from openstack_dashboard.settings import HORIZON_CONFIG
+@@ -22,6 +22,8 @@ from openstack_dashboard.settings import HORIZON_CONFIG
  
  DEBUG = True
  
@@ -21,7 +21,7 @@ index 5f1ab10cc..cef4e9485 100644
  # This setting controls whether or not compression is enabled. Disabling
  # compression makes Horizon considerably slower, but makes it much easier
  # to debug JS and CSS changes
-@@ -62,7 +64,7 @@ DEBUG = True
+@@ -74,7 +76,7 @@ DEBUG = True
  # including on the login form.
  #HORIZON_CONFIG["disable_password_reveal"] = False
  
@@ -30,11 +30,11 @@ index 5f1ab10cc..cef4e9485 100644
  
  # Set custom secret key:
  # You can either set it to a specific value or you can let horizon generate a
-diff --git a/openstack_dashboard/settings.py b/openstack_dashboard/settings.py
+diff --git a/lib/python3.8/site-packages/openstack_dashboard/settings.py b/lib/python3.8/site-packages/openstack_dashboard/settings.py
-index 02cd17ef3..69380f460 100644
+index 81b8e45e1..5909bc8a8 100644
---- a/lib/python3.6/site-packages/openstack_dashboard/settings.py
+--- a/lib/python3.8/site-packages/openstack_dashboard/settings.py
-+++ b/lib/python3.6/site-packages/openstack_dashboard/settings.py
++++ b/lib/python3.8/site-packages/openstack_dashboard/settings.py
-@@ -55,6 +55,8 @@ if ROOT_PATH not in sys.path:
+@@ -50,6 +50,8 @@ if ROOT_PATH not in sys.path:
  
  DEBUG = False
  
@@ -43,7 +43,7 @@ index 02cd17ef3..69380f460 100644
  ROOT_URLCONF = 'openstack_dashboard.urls'
  
  HORIZON_CONFIG = {
-@@ -216,7 +218,7 @@ USE_TZ = True
+@@ -211,7 +213,7 @@ USE_TZ = True
  DEFAULT_EXCEPTION_REPORTER_FILTER = 'horizon.exceptions.HorizonReporterFilter'
  
  SECRET_KEY = None
@@ -52,7 +52,7 @@ index 02cd17ef3..69380f460 100644
  
  ADD_INSTALLED_APPS = []
  
-@@ -265,7 +267,7 @@ else:
+@@ -260,7 +262,7 @@ else:
      )
  
  # allow to drop settings snippets into a local_settings_dir

patches/neutron/dnsmasq

@@ -1,4 +0,0 @@
-#!/bin/bash
-# Wrapper for dnsmasq
-
-exec $SNAP/usr/sbin/dnsmasq-orig -u snap_daemon -g snap_daemon $@

patches/nginx/0001-drop-setuid-setgid-initgroups.patch

@@ -0,0 +1,77 @@
+From a8df30a8a837c223945a13fe4cd9418084d8ed21 Mon Sep 17 00:00:00 2001
+From: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
+Date: Wed, 10 Jun 2020 20:14:32 +0000
+Subject: [PATCH] drop setuid/setgid/initgroups
+
+---
+ src/os/unix/ngx_process_cycle.c | 54 ---------------------------------
+ 1 file changed, 54 deletions(-)
+
+diff --git a/src/os/unix/ngx_process_cycle.c b/src/os/unix/ngx_process_cycle.c
+index 5817a2c2..305c6823 100644
+--- a/src/os/unix/ngx_process_cycle.c
++++ b/src/os/unix/ngx_process_cycle.c
+@@ -825,60 +825,6 @@ ngx_worker_process_init(ngx_cycle_t *cycle, ngx_int_t worker)
+         }
+     }
+
+-    if (geteuid() == 0) {
+-        if (setgid(ccf->group) == -1) {
+-            ngx_log_error(NGX_LOG_EMERG, cycle->log, ngx_errno,
+-                          "setgid(%d) failed", ccf->group);
+-            /* fatal */
+-            exit(2);
+-        }
+-
+-        if (initgroups(ccf->username, ccf->group) == -1) {
+-            ngx_log_error(NGX_LOG_EMERG, cycle->log, ngx_errno,
+-                          "initgroups(%s, %d) failed",
+-                          ccf->username, ccf->group);
+-        }
+-
+-#if (NGX_HAVE_PR_SET_KEEPCAPS && NGX_HAVE_CAPABILITIES)
+-        if (ccf->transparent && ccf->user) {
+-            if (prctl(PR_SET_KEEPCAPS, 1, 0, 0, 0) == -1) {
+-                ngx_log_error(NGX_LOG_EMERG, cycle->log, ngx_errno,
+-                              "prctl(PR_SET_KEEPCAPS, 1) failed");
+-                /* fatal */
+-                exit(2);
+-            }
+-        }
+-#endif
+-
+-        if (setuid(ccf->user) == -1) {
+-            ngx_log_error(NGX_LOG_EMERG, cycle->log, ngx_errno,
+-                          "setuid(%d) failed", ccf->user);
+-            /* fatal */
+-            exit(2);
+-        }
+-
+-#if (NGX_HAVE_CAPABILITIES)
+-        if (ccf->transparent && ccf->user) {
+-            struct __user_cap_data_struct    data;
+-            struct __user_cap_header_struct  header;
+-
+-            ngx_memzero(&header, sizeof(struct __user_cap_header_struct));
+-            ngx_memzero(&data, sizeof(struct __user_cap_data_struct));
+-
+-            header.version = _LINUX_CAPABILITY_VERSION_1;
+-            data.effective = CAP_TO_MASK(CAP_NET_RAW);
+-            data.permitted = data.effective;
+-
+-            if (syscall(SYS_capset, &header, &data) == -1) {
+-                ngx_log_error(NGX_LOG_EMERG, cycle->log, ngx_errno,
+-                              "capset() failed");
+-                /* fatal */
+-                exit(2);
+-            }
+-        }
+-#endif
+-    }
+-
+     if (worker >= 0) {
+         cpu_affinity = ngx_get_cpu_affinity(worker);
+
+--
+2.17.1
+

patches/nginx/drop-nginx-setgroups.patch

@@ -1,57 +0,0 @@
-Description: Drop code where nginx drops privileges for worker
-  processes. While setuid is covered by the browser-support plug,
-  setgroups isn't covered by any plugs. This code isn't required
-  because in strict mode we run worker processes as root:root.
-  The seccomp violation follows:
-  = Seccomp =
-  Time: Jun 16 01:13:15
-  Log: auid=4294967295 uid=0 gid=0 ses=4294967295 pid=6087 comm="nginx"
-       exe="/snap/keystone/x1/usr/sbin/nginx" sig=31 arch=c000003e
-       116(setgroups) compat=0 ip=0x7f40e288af09 code=0x0
-  Syscall: setgroups
-  Suggestion:
-  * adjust program to not use 'setgroups' until per-snap user/groups
-    are supported (https://launchpad.net/bugs/1446748)
-Author: Corey Bryant <corey.bryant@canonical.com>
-Forwarded: no
-
----
- src/os/unix/ngx_process_cycle.c | 22 ----------------------
- 1 file changed, 22 deletions(-)
-
-diff --git a/src/os/unix/ngx_process_cycle.c b/src/os/unix/ngx_process_cycle.c
-index 1710ea8..c428673 100644
---- a/src/os/unix/ngx_process_cycle.c
-+++ b/src/os/unix/ngx_process_cycle.c
-@@ -824,28 +824,6 @@ ngx_worker_process_init(ngx_cycle_t *cycle, ngx_int_t worker)
-         }
-     }
- 
--    if (geteuid() == 0) {
--        if (setgid(ccf->group) == -1) {
--            ngx_log_error(NGX_LOG_EMERG, cycle->log, ngx_errno,
--                          "setgid(%d) failed", ccf->group);
--            /* fatal */
--            exit(2);
--        }
--
--        if (initgroups(ccf->username, ccf->group) == -1) {
--            ngx_log_error(NGX_LOG_EMERG, cycle->log, ngx_errno,
--                          "initgroups(%s, %d) failed",
--                          ccf->username, ccf->group);
--        }
--
--        if (setuid(ccf->user) == -1) {
--            ngx_log_error(NGX_LOG_EMERG, cycle->log, ngx_errno,
--                          "setuid(%d) failed", ccf->user);
--            /* fatal */
--            exit(2);
--        }
--    }
--
-     if (worker >= 0) {
-         cpu_affinity = ngx_get_cpu_affinity(worker);
- 
--- 
-2.7.4
-

patches/open-iscsi/0001-Use-a-snap-specific-abstract-socket-address.patch

@@ -0,0 +1,56 @@
+From 84e8c808d146ef7d4a716bf951875f85fd7020c9 Mon Sep 17 00:00:00 2001
+From: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
+Date: Tue, 18 Aug 2020 19:07:37 +0000
+Subject: [PATCH] Use a snap-specific abstract socket address
+
+* open-iscsi is included into Ubuntu cloud images and, as a result,
+sockets with names hard-coded in the source get created and owned by
+systemd at the host level;
+* iscsid checks for the LISTEN_FDS environment variable to determine
+whether systemd passes the necessary socket file descriptors to it -
+this does not happen since iscsid.socket service name differs from the
+actual service name: snap.microstack.iscsid.service;
+* snapd's support for the systemd socket activation feature is present
+but abstract socket names are restricted to be prefixed with
+snap.<snap-name>.<your-socket-name> - this means that open-scsi needs to
+be patched since the abstract domain socket name isn't configurable and
+is hard-coded at the compile time.
+
+This patch alters the hard-coded abstract socket names in order to use
+systemd socket activation via the means supported by snapd and to avoid
+conflicts with an iscsid instance that might be used at the host where
+this snap is installed.
+---
+ usr/mgmt_ipc.h     | 2 +-
+ usr/uip_mgmt_ipc.h | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/usr/mgmt_ipc.h b/usr/mgmt_ipc.h
+index 55972ed..aa66419 100644
+--- a/usr/mgmt_ipc.h
++++ b/usr/mgmt_ipc.h
+@@ -23,7 +23,7 @@
+ #include "iscsi_if.h"
+ #include "config.h"
+ 
+-#define ISCSIADM_NAMESPACE	"ISCSIADM_ABSTRACT_NAMESPACE"
++#define ISCSIADM_NAMESPACE	"snap.microstack.ISCSIADM_ABSTRACT_NAMESPACE"
+ #define PEERUSER_MAX		64
+ 
+ typedef enum iscsiadm_cmd {
+diff --git a/usr/uip_mgmt_ipc.h b/usr/uip_mgmt_ipc.h
+index 916113d..484e9f5 100644
+--- a/usr/uip_mgmt_ipc.h
++++ b/usr/uip_mgmt_ipc.h
+@@ -24,7 +24,7 @@
+ #include "initiator.h"
+ #include "transport.h"
+ 
+-#define ISCSID_UIP_NAMESPACE	"ISCSID_UIP_ABSTRACT_NAMESPACE"
++#define ISCSID_UIP_NAMESPACE	"snap.microstack.ISCSID_UIP_ABSTRACT_NAMESPACE"
+ 
+ typedef enum iscsid_uip_cmd {
+ 	ISCSID_UIP_IPC_UNKNOWN			= 0,
+-- 
+2.17.1
+

snap-overlay/bin/iscsid-start

@@ -0,0 +1,19 @@
+#!/bin/sh
+
+mkdir -p $SNAP_COMMON/etc/iscsi/
+
+INAME_FILE=$SNAP_COMMON/etc/iscsi/initiatorname.iscsi
+
+if ! [ -f $INAME_FILE ]; then
+        # Generate a unique InitiatorName and save it
+        INAME=`iscsi-iname -p iqn.1993-08.org.debian:01`
+        echo "## DO NOT EDIT OR REMOVE THIS FILE!" > $INAME_FILE
+        echo "## If you remove this file, the iSCSI daemon will not start." >> $INAME_FILE
+        echo "## If you change the InitiatorName, existing access control lists" >> $INAME_FILE
+        echo "## may reject this initiator.  The InitiatorName must be unique">> $INAME_FILE
+        echo "## for each iSCSI initiator.  Do NOT duplicate iSCSI InitiatorNames." >> $INAME_FILE
+        printf "InitiatorName=$INAME\n"  >> $INAME_FILE
+        chmod 600 $INAME_FILE
+fi
+
+exec $SNAP/sbin/iscsid -p $SNAP_COMMON/var/run/iscsid.pid --initiatorname=$INAME_FILE --config=$SNAP_COMMON/etc/iscsi/iscsid.conf

snap-overlay/bin/load-modules

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+set -ex
+
+modprobe -a vhost vhost-net vhost-scsi vhost-vsock pci-stub vfio nbd dm-mod dm-thin-pool dm-snapshot iscsi-tcp target-core-mod

snap-overlay/bin/set-default-config

@@ -13,9 +13,11 @@ snapctl set \
 
 # Networking related settings.
 snapctl set \
-        config.network.dns=1.1.1.1 \
+        config.network.dns-servers=1.1.1.1 \
+	config.network.dns-domain=microstack.example. \
         config.network.ext-gateway=10.20.20.1 \
         config.network.control-ip=10.20.20.1 \
+	config.network.node-fqdn=`hostname -f` \
         config.network.compute-ip=10.20.20.1 \
         config.network.ext-cidr=10.20.20.1/24 \
         config.network.security-rules=true \
@@ -30,11 +32,19 @@ snapctl set \
         config.credentials.os-password=keystone \
         config.credentials.key-pair="/home/{USER}/snap/{SNAP_NAME}/common/.ssh/id_microstack" \
         config.credentials.nova-password=nova \
+        config.credentials.cinder-password=cinder \
         config.credentials.neutron-password=neutron \
         config.credentials.placement-password=placement \
         config.credentials.glance-password=glance \
         ;
 
+# Cinder volume backend config.
+snapctl set \
+        config.cinder.setup-loop-based-cinder-lvm-backend=false \
+        config.cinder.loop-device-file-size=32G \
+        config.cinder.lvm-backend-volume-group=cinder-volumes \
+        ;
+
 # Host optimizations and fixes.
 snapctl set \
         config.host.ip-forwarding=false \
@@ -45,12 +55,13 @@ snapctl set \
 snapctl set \
         config.services.control-plane=true \
         config.services.hypervisor=true \
+        config.services.spice-console=true \
         ;
 
 # Clustering roles
 snapctl set \
-        cluster.role=control \
+        config.cluster.role=control \
-        cluster.password=null \
+        config.cluster.password=null \
         ;
 
 # Uninstall stuff

snap-overlay/bin/setup-br-ex

@@ -10,15 +10,30 @@
 set -ex
 
 extcidr=$(snapctl get config.network.ext-cidr)
+controlip=$(snapctl get config.network.control-ip)
 
-# Create external integration bridge
+# NOTE(dmitriis): this needs to be reworked to allow for OVN + direct exit of traffic to
-ovs-vsctl --retry --may-exist add-br br-ex
+# the provider network from a compute node.
+
+# Create an external bridge in the system datapath.
+ovs-vsctl --retry --may-exist add-br br-ex -- set bridge br-ex datapath_type=system protocols=OpenFlow13,OpenFlow15
+ovs-vsctl set open . external-ids:ovn-bridge-mappings=physnet1:br-ex
+ovs-vsctl set open . external-ids:ovn-cms-options="enable-chassis-as-gw"
+
+# Configure the settings used by self-configuration of ovn-controller.
+ovs-vsctl set open . external-ids:ovn-encap-type=geneve -- set open . external-ids:ovn-encap-ip=$controlip
+# Leave SB database connection details for ovn-controller to pick up.
+ovs-vsctl set open . external-ids:ovn-remote='unix:/var/snap/microstack/common/run/ovn/ovnsb_db.sock'
+
+# NOTE: system-id is a randomly-generated UUID (see the --system-id=random option for ovs-ctl)
+# As it is generated automatically, we do not set it here.
+# It can be retrieved by looking at `ovs-vsctl get open_vswitch . external-ids`.
 
 # Configure br-ex
 ip address add $extcidr dev br-ex || :
 ip link set br-ex up || :
 
-sudo iptables -w -t nat -A POSTROUTING -s $extcidr ! \
+iptables-legacy -w -t nat -A POSTROUTING -s $extcidr ! \
      -d $extcidr -j MASQUERADE || :
 
 exit 0

snap-overlay/bin/target-start

@@ -0,0 +1,4 @@
+#!/bin/sh
+
+# This wrapper is needed due to https://bugs.launchpad.net/snapd/+bug/1882839
+$SNAP/usr/bin/targetcli restoreconfig clear_existing=True

snap-overlay/bin/target-stop

@@ -0,0 +1,5 @@
+#!/bin/sh
+
+$SNAP/usr/bin/targetcli saveconfig
+# This wrapper is needed due to https://bugs.launchpad.net/snapd/+bug/1882839
+$SNAP/usr/bin/targetcli clearconfig confirm=True

snap-overlay/etc/neutron/dhcp_agent.ini

@@ -1,5 +0,0 @@
-[DEFAULT]
-interface_driver = openvswitch
-dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq
-enable_isolated_metadata = True
-dnsmasq_dns_servers = 1.1.1.1

snap-overlay/etc/neutron/l3_agent.ini

@@ -1,2 +0,0 @@
-[DEFAULT]
-interface_driver = openvswitch

snap-overlay/etc/neutron/metadata_agent.ini

@@ -1,3 +0,0 @@
-[DEFAULT]
-nova_metadata_ip = 10.20.20.1
-metadata_proxy_shared_secret = supersecret

snap-overlay/etc/neutron/neutron.conf

@@ -1,4 +1,10 @@
 [DEFAULT]
 core_plugin = ml2
-service_plugins = router
+service_plugins = ovn-router
 allow_overlapping_ips = True
+
+# Disable auto-scheduling of networks to DHCP agents since they are not used with OVN.
+network_auto_schedule = False
+
+[ovn]
+ovn_metadata_enabled = True

snap-overlay/etc/neutron/plugins/ml2/ml2_conf.ini

@@ -1,13 +1,18 @@
 [ml2]
-mechanism_drivers = openvswitch
+mechanism_drivers = ovn
-extension_drivers = port_security,trunk,qos
+extension_drivers = port_security,qos
-tenant_network_types = geneve,gre,vxlan
+tenant_network_types = geneve
+overlay_ip_version = 4
+external_network_type = flat
 
 [ml2_type_geneve]
 vni_ranges = 1:65535
+max_header_size = 40
 
-[ml2_type_gre]
+[ml2_type_flat]
-tunnel_id_ranges = 1:65535
+flat_networks = *
 
-[ml2_type_vxlan]
+[ovn]
-vni_ranges = 1:65535
+# TODO(dmitriis): replace the common path with a template.
+ovn_nb_connection = unix:/var/snap/microstack/common/run/ovn/ovnnb_db.sock
+ovn_sb_connection = unix:/var/snap/microstack/common/run/ovn/ovnsb_db.sock

snap-overlay/etc/neutron/plugins/ml2/openvswitch_agent.ini

@@ -1,11 +0,0 @@
-# Snap provided defaults for neutron-openvswitch-agent
-[securitygroup]
-enable_security_group = True
-firewall_driver = openvswitch
-
-[AGENT]
-tunnel_types = geneve,vxlan,gre
-
-[ovs]
-local_ip = 127.0.0.1
-bridge_mappings = physnet1:br-ex

snap-overlay/etc/placement/placement.conf

@@ -0,0 +1,3 @@
+# Snap distribution defaults - do not change, override in $SNAP_COMMON/etc/cinder.conf.d
+[database]
+max_retries = -1

snap-overlay/lib/python3.8/site-packages/openstack_dashboard/themes/ubuntu/_styles.scss

@@ -116,7 +116,8 @@ table {
 /* Login splash screen */
 #splash {
   background: url("/static/themes/ubuntu/img/image-background-pattern.png");
-  background: linear-gradient(to right, rgba(100, 100, 100, 0.2), transparent), url("/static/themes/ubuntu/img/image-background-pattern.png");
+  position: absolute;
+  width: 100vw;
 
   .login {
     background-color: $white;

snap-overlay/snap-openstack.yaml

@@ -10,6 +10,7 @@ setup:
     - "{snap_common}/etc/nginx/sites-enabled"
     - "{snap_common}/etc/nginx/snap/sites-enabled"
     - "{snap_common}/etc/glance/glance.conf.d"
+    - "{snap_common}/etc/placement/placement.conf.d"
     - "{snap_common}/etc/horizon/horizon.conf.d"
     - "{snap_common}/etc/horizon/local_settings.d"
     - "{snap_common}/var/horizon/static"
@@ -17,6 +18,7 @@ setup:
     - "{snap_common}/etc/cinder/uwsgi/snap"
     - "{snap_common}/etc/nova/uwsgi/snap"
     - "{snap_common}/etc/horizon/uwsgi/snap"
+    - "{snap_common}/etc/placement/uwsgi/snap"
     - "{snap_common}/etc/rabbitmq"
     - "{snap_common}/fernet-keys"
     - "{snap_common}/lib"
@@ -25,6 +27,9 @@ setup:
     - "{snap_common}/log"
     - "{snap_common}/run"
     - "{snap_common}/lib/instances"
+    - "{snap_common}/etc/apparmor.d/libvirt"
+    - "{snap_common}/etc/iscsi"
+    - "{snap_common}/etc/target"
   templates:
     keystone-nginx.conf.j2: "{snap_common}/etc/nginx/snap/sites-enabled/keystone.conf"
     keystone-snap.conf.j2: "{snap_common}/etc/keystone/keystone.conf.d/keystone-snap.conf"
@@ -33,28 +38,40 @@ setup:
     nova-snap.conf.j2: "{snap_common}/etc/nova/nova.conf.d/nova-snap.conf"
     nova-nginx.conf.j2: "{snap_common}/etc/nginx/snap/sites-enabled/nova.conf"
     glance-snap.conf.j2: "{snap_common}/etc/glance/glance.conf.d/glance-snap.conf"
+    placement-nginx.conf.j2: "{snap_common}/etc/nginx/snap/sites-enabled/placement.conf"
+    placement-snap.conf.j2: "{snap_common}/etc/placement/placement.conf.d/placement-snap.conf"
     cinder-nginx.conf.j2: "{snap_common}/etc/nginx/snap/sites-enabled/cinder.conf"
     cinder-snap.conf.j2: "{snap_common}/etc/cinder/cinder.conf.d/cinder-snap.conf"
+    cinder.database.conf.j2: "{snap_common}/etc/cinder/cinder.conf.d/database.conf"
+    cinder.rabbitmq.conf.j2: "{snap_common}/etc/cinder/cinder.conf.d/rabbitmq.conf"
+    cinder.keystone.conf.j2: "{snap_common}/etc/cinder/cinder.conf.d/keystone.conf"
+    cinder-rootwrap.conf.j2: "{snap_common}/etc/cinder/rootwrap.conf"
     horizon-snap.conf.j2: "{snap_common}/etc/horizon/horizon.conf.d/horizon-snap.conf"
     horizon-nginx.conf.j2: "{snap_common}/etc/nginx/snap/sites-enabled/horizon.conf"
     05_snap_tweaks.j2: "{snap_common}/etc/horizon/local_settings.d/_05_snap_tweaks.py"
     libvirtd.conf.j2: "{snap_common}/libvirt/libvirtd.conf"
     virtlogd.conf.j2: "{snap_common}/libvirt/virtlogd.conf"
     microstack.rc.j2: "{snap_common}/etc/microstack.rc"
+    microstack.json.j2: "{snap_common}/etc/microstack.json"
     glance.conf.d.keystone.conf.j2: "{snap_common}/etc/glance/glance.conf.d/keystone.conf"
+    placement.conf.d.keystone.conf.j2: "{snap_common}/etc/placement/placement.conf.d/keystone.conf"
     nova.conf.d.keystone.conf.j2: "{snap_common}/etc/nova/nova.conf.d/keystone.conf"
     nova.conf.d.database.conf.j2: "{snap_common}/etc/nova/nova.conf.d/database.conf"
     nova.conf.d.rabbitmq.conf.j2: "{snap_common}/etc/nova/nova.conf.d/rabbitmq.conf"
-    nova.conf.d.nova-placement.conf.j2: "{snap_common}/etc/nova/nova.conf.d/nova-placement.conf"
     nova.conf.d.glance.conf.j2: "{snap_common}/etc/nova/nova.conf.d/glance.conf"
     nova.conf.d.neutron.conf.j2: "{snap_common}/etc/nova/nova.conf.d/neutron.conf"
+    nova.conf.d.placement.conf.j2: "{snap_common}/etc/nova/nova.conf.d/placement.conf"
+    nova.conf.d.console.conf.j2: "{snap_common}/etc/nova/nova.conf.d/console.conf"
     keystone.database.conf.j2: "{snap_common}/etc/keystone/keystone.conf.d/database.conf"
     glance.database.conf.j2: "{snap_common}/etc/glance/glance.conf.d/database.conf"
+    placement.conf.d.database.conf.j2: "{snap_common}/etc/placement/placement.conf.d/database.conf"
     neutron.keystone.conf.j2: "{snap_common}/etc/neutron/neutron.conf.d/keystone.conf"
     neutron.nova.conf.j2: "{snap_common}/etc/neutron/neutron.conf.d/nova.conf"
     neutron.database.conf.j2: "{snap_common}/etc/neutron/neutron.conf.d/database.conf"
     neutron.conf.d.rabbitmq.conf.j2: "{snap_common}/etc/neutron/neutron.conf.d/rabbitmq.conf"
+    neutron_ovn_metadata_agent.ini.j2: "{snap_common}/etc/neutron/neutron_ovn_metadata_agent.ini"
     rabbitmq.conf.j2: "{snap_common}/etc/rabbitmq/rabbitmq.config"
+    iscsid.conf.j2: "{snap_common}/etc/iscsi/iscsid.conf"
 
     # LMA stack templates
     telegraf.conf.j2: "{snap_common}/etc/telegraf/telegraf-microstack.conf"
@@ -63,17 +80,22 @@ setup:
   chmod:
     "{snap_common}/instances": 0755
     "{snap_common}/etc/microstack.rc": 0644
+    "{snap_common}/etc/microstack.json": 0644
   snap-config-keys:
     ospassword: 'config.credentials.os-password'
     nova_password: 'config.credentials.nova-password'
+    cinder_password: 'config.credentials.cinder-password'
     neutron_password: 'config.credentials.neutron-password'
     placement_password: 'config.credentials.placement-password'
     glance_password: 'config.credentials.glance-password'
+    placement_password: 'config.credentials.placement-password'
     control_ip: 'config.network.control-ip'
+    node_fqdn: 'config.network.node-fqdn'
     compute_ip: 'config.network.compute-ip'
     extgateway: 'config.network.ext-gateway'
     extcidr: 'config.network.ext-cidr'
-    dns: 'config.network.dns'
+    dns_servers: 'config.network.dns-servers'
+    dns_domain: 'config.network.dns-domain'
     dashboard_allowed_hosts: 'config.network.dashboard-allowed-hosts'
     dashboard_port: 'config.network.ports.dashboard'
     mysql_port: 'config.network.ports.mysql'
@@ -83,6 +105,10 @@ setup:
     monitoring_tag: 'config.monitoring.tag'
     monitoring_ipmi: 'config.monitoring.ipmi'
     alerting_tag: 'config.alerting.tag'
+    ovn_nb_connection: 'config.network.ovn-nb-connection'
+    ovn_sb_connection: 'config.network.ovn-sb-connection'
+    setup_loop_based_cinder_lvm_backend: 'config.cinder.setup-loop-based-cinder-lvm-backend'
+    lvm_backend_volume_group: 'config.cinder.lvm-backend-volume-group'
 entry_points:
   keystone-manage:
     binary: "{snap}/bin/keystone-manage"
@@ -116,19 +142,6 @@ entry_points:
       - "{snap_common}/etc/nova/nova.conf"
     config-dirs:
       - "{snap_common}/etc/nova/nova.conf.d"
-  nova-uwsgi:
-    type: uwsgi
-    uwsgi-dir: "{snap_common}/etc/nova/uwsgi/snap"
-    uwsgi-dir-override: "{snap_common}/etc/nova/uwsgi"
-    config-files:
-      - "{snap}/etc/nova/nova.conf"
-    config-files-override:
-      - "{snap_common}/etc/nova/nova.conf"
-    config-dirs:
-      - "{snap_common}/etc/nova/nova.conf.d"
-    templates:
-      nova-placement-api.ini.j2:
-        "{snap_common}/etc/nova/uwsgi/snap/nova-placement-api.ini"
   nova-conductor:
     binary: "{snap}/bin/nova-conductor"
     config-files:
@@ -169,6 +182,17 @@ entry_points:
       - "{snap_common}/etc/nova/nova.conf"
     config-dirs:
       - "{snap_common}/etc/nova/nova.conf.d"
+  nova-spicehtml5proxy:
+    binary: "{snap}/bin/nova-spicehtml5proxy"
+    config-files:
+      - "{snap}/etc/nova/nova.conf"
+    config-files-override:
+      - "{snap_common}/etc/nova/nova.conf"
+    config-dirs:
+      - "{snap_common}/etc/nova/nova.conf.d"
+    templates:
+      nova.conf.d.console.conf.j2:
+        "{snap_common}/etc/nova/nova.conf.d/console.conf"
   neutron-db-manage:
     binary: "{snap}/bin/neutron-db-manage"
     config-files:
@@ -215,36 +239,19 @@ entry_points:
       - "{snap_common}/etc/neutron/neutron.conf"
     config-dirs:
       - "{snap_common}/etc/neutron/neutron.conf.d"
-  neutron-l3-agent:
+  neutron-ovn-metadata-agent:
-    binary: "{snap}/bin/neutron-l3-agent"
+    binary: "{snap}/bin/neutron-ovn-metadata-agent"
     config-files:
       - "{snap}/etc/neutron/neutron.conf"
-      - "{snap}/etc/neutron/l3_agent.ini"
+      - "{snap}/etc/neutron/neutron_ovn_metadata_agent.ini"
     config-files-override:
       - "{snap_common}/etc/neutron/neutron.conf"
-      - "{snap_common}/etc/neutron/l3_agent.ini"
+      - "{snap_common}/etc/neutron/neutron_ovn_metadata_agent.ini"
-    config-dirs:
-      - "{snap_common}/etc/neutron/neutron.conf.d"
-  neutron-dhcp-agent:
-    binary: "{snap}/bin/neutron-dhcp-agent"
-    config-files:
-      - "{snap}/etc/neutron/neutron.conf"
-      - "{snap}/etc/neutron/dhcp_agent.ini"
-    config-files-override:
-      - "{snap_common}/etc/neutron/neutron.conf"
-      - "{snap_common}/etc/neutron/dhcp_agent.ini"
-    config-dirs:
-      - "{snap_common}/etc/neutron/neutron.conf.d"
-  neutron-metadata-agent:
-    binary: "{snap}/bin/neutron-metadata-agent"
-    config-files:
-      - "{snap}/etc/neutron/neutron.conf"
-      - "{snap}/etc/neutron/metadata_agent.ini"
-    config-files-override:
-      - "{snap_common}/etc/neutron/neutron.conf"
-      - "{snap_common}/etc/neutron/metadata_agent.ini"
     config-dirs:
       - "{snap_common}/etc/neutron/neutron.conf.d"
+    templates:
+      neutron_ovn_metadata_agent.ini.j2:
+        "{snap_common}/etc/neutron/neutron_ovn_metadata_agent.ini"
   glance-manage:
     binary: "{snap}/bin/glance-manage"
     config-files:
@@ -269,6 +276,27 @@ entry_points:
       - "{snap_common}/etc/glance/glance-api.conf"
     config-dirs:
       - "{snap_common}/etc/glance/glance.conf.d"
+  placement-uwsgi:
+    type: uwsgi
+    uwsgi-dir: "{snap_common}/etc/placement/uwsgi/snap"
+    uwsgi-dir-override: "{snap_common}/etc/placement/uwsgi"
+    config-files:
+      - "{snap}/etc/placement/placement.conf"
+    config-files-override:
+      - "{snap_common}/etc/placement/placement.conf"
+    config-dirs:
+      - "{snap_common}/etc/placement/placement.conf.d"
+    templates:
+      placement-api.ini.j2:
+        "{snap_common}/etc/placement/uwsgi/snap/placement-api.ini"
+  placement-manage:
+    binary: "{snap}/bin/placement-manage"
+    config-files:
+      - "{snap}/etc/placement/placement.conf"
+    config-files-override:
+      - "{snap_common}/etc/placement/placement.conf"
+    config-dirs:
+      - "{snap_common}/etc/placement/placement.conf.d"
   cinder-backup:
     binary: "{snap}/bin/cinder-backup"
     config-files:

snap-overlay/templates/cinder-rootwrap.conf.j2

@@ -0,0 +1,6 @@
+[DEFAULT]
+filters_path={{ snap }}/etc/cinder/rootwrap.d
+
+use_syslog=False
+syslog_log_facility=syslog
+syslog_log_level=ERROR

snap-overlay/templates/cinder-snap.conf.j2

@@ -2,9 +2,26 @@
 # Set state path to writable directory
 state_path = {{ snap_common }}/lib
 
+resource_query_filters_file = {{ snap }}/etc/cinder/resource_filters.json
+
 # Set volume configuration file storage directory
 volumes_dir = {{ snap_common }}/lib/volumes
 
+my_ip = {{ compute_ip }}
+
+rootwrap_config = {{ snap_common }}/etc/cinder/rootwrap.conf
+
+enabled_backends = {% if setup_loop_based_cinder_lvm_backend %}lvm-loop-based-backend{% endif %}
+
+{% if setup_loop_based_cinder_lvm_backend %}
+[lvm-loop-based-backend]
+volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver
+iscsi_protocol = iscsi
+target_helper = lioadm
+volume_group = {{ lvm_backend_volume_group }}
+volume_backend_name=lvm-loop-based
+{% endif %}
+
 [oslo_concurrency]
 # Oslo Concurrency lock path
 lock_path = {{ snap_common }}/lock

snap-overlay/templates/cinder.database.conf.j2

@@ -0,0 +1,2 @@
+[database]
+connection = mysql+pymysql://cinder:cinder@{{ control_ip }}:{{ mysql_port }}/cinder

snap-overlay/templates/cinder.keystone.conf.j2

@@ -0,0 +1,13 @@
+[DEFAULT]
+auth_strategy = keystone
+
+[keystone_authtoken]
+auth_uri = http://{{ control_ip }}:5000
+auth_url = http://{{ control_ip }}:5000
+memcached_servers = {{ control_ip }}:11211
+auth_type = password
+project_domain_name = default
+user_domain_name = default
+project_name = service
+username = cinder
+password = {{ cinder_password }}

snap-overlay/templates/cinder.rabbitmq.conf.j2

@@ -0,0 +1,2 @@
+[DEFAULT]
+transport_url = rabbit://openstack:rabbitmq@{{ control_ip }}:{{ rabbit_port }}

snap-overlay/templates/iscsid.conf.j2

@@ -0,0 +1,22 @@
+iscsid.startup = {{ snap }}/sbin/iscsid
+node.startup = manual
+node.leading_login = No
+node.session.timeo.replacement_timeout = 120
+node.conn[0].timeo.login_timeout = 15
+node.conn[0].timeo.logout_timeout = 15
+node.conn[0].timeo.noop_out_interval = 5
+node.conn[0].timeo.noop_out_timeout = 5
+node.session.err_timeo.abort_timeout = 15
+node.session.err_timeo.lu_reset_timeout = 30
+node.session.err_timeo.tgt_reset_timeout = 30
+node.session.cmds_max = 128
+node.session.queue_depth = 32
+node.session.xmit_thread_priority = -20
+node.session.iscsi.InitialR2T = No
+node.session.iscsi.ImmediateData = Yes
+node.session.iscsi.FirstBurstLength = 262144
+node.session.iscsi.MaxBurstLength = 16776192
+node.conn[0].iscsi.MaxRecvDataSegmentLength = 262144
+node.conn[0].iscsi.MaxXmitDataSegmentLength = 0
+discovery.sendtargets.iscsi.MaxRecvDataSegmentLength = 32768
+node.session.nr_sessions = 1

snap-overlay/templates/microstack.json.j2

@@ -0,0 +1,26 @@
+{
+    "openstack": {
+        "admin": {
+            "password": "{{ ospassword }}",
+            "project_domain_name": "default",
+            "project_name": "admin",
+            "user_domain_name": "default",
+            "username": "admin"
+        },
+        "api_info": {
+            "keystone": {
+                "service_type": "identityv3",
+                "version": 3
+            }
+        },
+        "auth_url": "http://{{ control_ip }}:5000",
+        "endpoint_type": null,
+        "https_cacert": "",
+        "https_cert": "",
+        "https_insecure": false,
+        "https_key": "",
+        "profiler_conn_str": null,
+        "profiler_hmac_key": null,
+        "region_name": ""
+    }
+}

snap-overlay/templates/neutron-snap.conf.j2

@@ -4,6 +4,18 @@ state_path = {{ snap_common }}/lib
 # Log to systemd journal
 use_journal = True
 
+{% if dns_domain %}
+dns_domain = {{ dns_domain }}
+{% endif %}
+
 [oslo_concurrency]
 # Oslo Concurrency lock path
 lock_path = {{ snap_common }}/lock
+
+[ovn]
+{% if dns_servers %}
+dns_servers= {{ dns_servers }}
+{% endif %}
+
+# TODO(dmitriis): enable once external bridge IP addressing for compute nodes is figured out.
+# enable_distributed_floating_ip = True

snap-overlay/templates/neutron_ovn_metadata_agent.ini.j2

@@ -0,0 +1,13 @@
+[DEFAULT]
+metadata_proxy_shared_secret = supersecret
+
+[ovs]
+ovsdb_connection = unix:{{ snap_common }}/run/openvswitch/db.sock
+
+[ovn]
+{% if ovn_nb_connection %}
+ovn_nb_connection = {{ ovn_nb_connection }}
+{% endif %}
+{% if ovn_sb_connection %}
+ovn_sb_connection = {{ ovn_sb_connection }}
+{% endif %}

snap-overlay/templates/nginx.conf.j2

@@ -1,4 +1,4 @@
-user root root;
+user snap_daemon snap_daemon;
 worker_processes auto;
 pid {{ snap_common }}/run/nginx.pid;
 

snap-overlay/templates/nova-snap.conf.j2

@@ -4,6 +4,20 @@ state_path = {{ snap_common }}/lib
 # Log to systemd journal
 use_journal = True
 
+# Set a hostname to be an FQDN to avoid issues with port binding for
+# which a hostname of a Nova node must match a hostname of an OVN chassis.
+host = {{ node_fqdn }}
+
 [oslo_concurrency]
 # Oslo Concurrency lock path
 lock_path = {{ snap_common }}/lock
+
+[os_vif_ovs]
+# Nova relies on os-vif for openvswitch interface plugging and needs a connection to
+# OVSDB. This is done via a TCP connection to localhost by default so we override this to
+# use a unix socket instead.
+# See os-vif/releasenotes/notes/add-ovsdb-native-322fffb49c91503d.yaml
+ovsdb_connection = unix:{{ snap_common }}/run/openvswitch/db.sock
+
+[cinder]
+os_region_name = microstack

snap-overlay/templates/nova.conf.d.console.conf.j2

@@ -0,0 +1,18 @@
+[DEFAULT]
+web = {{ snap }}/usr/share/spice-html5
+
+[vnc]
+enabled = False
+
+[spice]
+# Proxy configuration (controller only).
+html5proxy_host = 0.0.0.0
+html5proxy_port = 6082
+
+enabled = True
+agent_enabled = True
+html5proxy_base_url = http://{{ control_ip }}:6082/spice_auto.html
+server_listen = {{ compute_ip }}
+server_proxyclient_address = {{ compute_ip }}
+keymap = en-us
+

snap-overlay/templates/nova.conf.d.placement.conf.j2

@@ -0,0 +1,11 @@
+[placement]
+auth_uri = http://{{ control_ip }}:5000
+auth_url = http://{{ control_ip }}:5000
+memcached_servers = {{ control_ip }}:11211
+auth_type = password
+project_domain_name = default
+user_domain_name = default
+project_name = service
+username = nova
+password = {{ nova_password }}
+os_region_name = RegionOne

snap-overlay/templates/nrpe.cfg.j2

@@ -7,8 +7,8 @@ server_port=5666
 #allowed_hosts=0.0.0.0/0
 #allowed_hosts=10.0.0.0/8,127.0.0.1
 
-nrpe_user=root
+nrpe_user=snap_daemon
-nrpe_group=root
+nrpe_group=snap_daemon
 dont_blame_nrpe=0
 debug=0
 pid_file={{ snap_common }}/run/nrpe.pid
@@ -32,10 +32,6 @@ command[check_libvirtd]=python3 {{ snap }}/usr/lib/nagios/plugins/check_systemd.
 command[check_memcached]=python3 {{ snap }}/usr/lib/nagios/plugins/check_systemd.py snap.microstack.memcached
 command[check_mysqld]=python3 {{ snap }}/usr/lib/nagios/plugins/check_systemd.py snap.microstack.mysqld
 command[check_neutron_api]=python3 {{ snap }}/usr/lib/nagios/plugins/check_systemd.py snap.microstack.neutron-api
-command[check_neutron_dhcp_agent]=python3 {{ snap }}/usr/lib/nagios/plugins/check_systemd.py snap.microstack.neutron-dhcp-agent
-command[check_neutron_l3_agent]=python3 {{ snap }}/usr/lib/nagios/plugins/check_systemd.py snap.microstack.neutron-l3-agent
-command[check_neutron_metadata_agent]=python3 {{ snap }}/usr/lib/nagios/plugins/check_systemd.py snap.microstack.neutron-metadata-agent
-command[check_neutron_openvswitch_agent]=python3 {{ snap }}/usr/lib/nagios/plugins/check_systemd.py snap.microstack.neutron-openvswitch-agent
 command[check_nginx]=python3 {{ snap }}/usr/lib/nagios/plugins/check_systemd.py snap.microstack.nginx
 command[check_nova_api]=python3 {{ snap }}/usr/lib/nagios/plugins/check_systemd.py snap.microstack.nova-api
 command[check_nova_api_metadata]=python3 {{ snap }}/usr/lib/nagios/plugins/check_systemd.py snap.microstack.nova-api-metadata

snap-overlay/templates/placement-api.ini.j2

@@ -1,5 +1,5 @@
 [uwsgi]
-wsgi-file = {{ snap }}/bin/nova-placement-api
+wsgi-file = {{ snap }}/bin/placement-api
 uwsgi-socket = {{ snap_common }}/run/placement-api.sock
 buffer-size = 65535
 master = true
@@ -8,3 +8,4 @@ processes = 4
 thunder-lock = true
 lazy-apps = true
 home = {{ snap }}/usr
+pyargv = {{ pyargv }}

snap-overlay/templates/placement-nginx.conf.j2

@@ -0,0 +1,10 @@
+server {
+    listen 8778;
+    error_log syslog:server=unix:/dev/log;
+    access_log syslog:server=unix:/dev/log;
+    location / {
+        include {{ snap }}/usr/conf/uwsgi_params;
+        uwsgi_param SCRIPT_NAME '';
+        uwsgi_pass unix://{{ snap_common }}/run/placement-api.sock;
+    }
+}

snap-overlay/templates/placement-snap.conf.j2

@@ -0,0 +1,9 @@
+[DEFAULT]
+# Set state path to writable directory
+state_path = {{ snap_common }}/lib
+# Log to systemd journal
+use_journal = True
+
+[oslo_concurrency]
+# Oslo Concurrency lock path
+lock_path = {{ snap_common }}/lock

snap-overlay/templates/placement.conf.d.database.conf.j2

@@ -0,0 +1,2 @@
+[placement_database]
+connection = mysql+pymysql://placement:placement@{{ control_ip }}:{{ mysql_port }}/placement

snap-overlay/templates/placement.conf.d.keystone.conf.j2

@@ -1,9 +1,13 @@
-[placement]
+[keystone_authtoken]
-os_region_name = microstack
+auth_uri = http://{{ control_ip }}:5000
-project_domain_name = default
-project_name = service
-auth_type = password
-user_domain_name = default
 auth_url = http://{{ control_ip }}:5000
+memcached_servers = {{ control_ip }}:11211
+auth_type = password
+project_domain_name = default
+user_domain_name = default
+project_name = service
 username = placement
 password = {{ placement_password }}
+
+[paste_deploy]
+flavor = keystone

snap-overlay/templates/placement.conf.d.placement-api.conf.j2

@@ -0,0 +1,2 @@
+[placement]
+randomize_allocation_candidates = true

snap-overlay/templates/targets.conf.j2

@@ -0,0 +1,2 @@
+include {{ snap_common }}/lib/volumes/*
+default-driver iscsi

snap-wrappers/ovn/ovn-wrapper

@@ -0,0 +1,25 @@
+#!/bin/bash
+
+set -e
+
+export OVN_LOGDIR=${SNAP_COMMON}/log/ovn
+export OVN_RUNDIR=${SNAP_COMMON}/run/ovn
+export OVN_SYSCONFDIR=${SNAP_COMMON}/etc
+export OVN_PKGDATADIR=${SNAP}/usr/local/share/ovn
+export OVN_BINDIR=${SNAP}/bin
+export OVN_SBINDIR=${SNAP}/sbin
+
+
+mkdir -p ${OVN_LOGDIR}
+mkdir -p ${OVN_RUNDIR}
+mkdir -p ${OVN_SYSCONFDIR}/ovn
+
+if [ `basename $1` = 'ovn-ctl' -a `snapctl get config.clustered` == 'true' ]
+then
+	# TODO: replace this with a secure alternative once TLS is supported.
+	# Create an SB TCP socket to be used by remote ovn-controller and neutron-ovn-metadata
+	# agents.
+	exec $@ --db-sb-create-insecure-remote=yes
+else
+	exec $@
+fi

snap-wrappers/ovs/ovs-wrapper

@@ -5,12 +5,16 @@ set -e
 export OVS_LOGDIR=${SNAP_COMMON}/log/openvswitch
 export OVS_RUNDIR=${SNAP_COMMON}/run/openvswitch
 export OVS_SYSCONFDIR=${SNAP_COMMON}/etc
-export OVS_PKGDATADIR=${SNAP}/share/openvswitch
+export OVS_PKGDATADIR=${SNAP}/usr/local/share/openvswitch
 export OVS_BINDIR=${SNAP}/bin
 export OVS_SBINDIR=${SNAP}/sbin
 
-mkdir -p ${OVS_LOGDIR}
+if [ `basename $1` = 'ovs-ctl' ]
-mkdir -p ${OVS_RUNDIR}
+then
-mkdir -p ${OVS_SYSCONFDIR}/openvswitch
+	mkdir -p ${OVS_LOGDIR}
-
+	mkdir -p ${OVS_RUNDIR}
-exec $@
+	mkdir -p ${OVS_SYSCONFDIR}/openvswitch
+	exec $@ --system-id=random
+else
+	exec $@
+fi

snap-wrappers/rabbitmq/erl

@@ -19,7 +19,7 @@
 # %CopyrightEnd%
 #
 ROOTDIR=$SNAP/usr/lib/erlang
-BINDIR=$ROOTDIR/erts-9.2/bin
+BINDIR=$ROOTDIR/erts-10.6.4/bin
 EMU=beam
 PROGNAME=`echo $0 | sed 's/.*\///'`
 export EMU

snap-wrappers/rabbitmq/rabbitmq-script-wrapper

@@ -15,6 +15,10 @@
 ##  Copyright (c) 2007-2014 GoPivotal, Inc.  All rights reserved.
 ##
 
+# Make sure files created by rabbitmq (including the .erlang.cookie file which
+# needs to be restricted to the user only) are created with strict permissions.
+umask 077
+
 mkdir -p $SNAP_COMMON/lib/rabbitmq
 cd $SNAP_COMMON/lib/rabbitmq
 

snap/hooks/install

@@ -1,10 +1,47 @@
 #!/bin/bash
 set -ex
 
+
 # Initialize config
 set-default-config
 
+# TODO(dmitriis): disable other services and only enable them once the
+# prerequisites are met instead of allowing snapd to start them and make them fail.
+# snapd starts all non-disabled services by default which may lead to errors such as
+# a module loading error in case of ovs-vswitchd. The sequence is as follows:
+# 1. The snap is installed;
+# 2. Non-disabled services are started;
+# 3. Interfaces that do not have auto-connection enabled are manually connected by
+#    an operator (connecting openvswitch-support loads the openvswitch kernel module
+#    but auto-connection is not enabled for openvswitch-support).
+snapctl stop --disable $SNAP_INSTANCE_NAME.ovsdb-server
+snapctl stop --disable $SNAP_INSTANCE_NAME.ovn-ovsdb-server-sb
+snapctl stop --disable $SNAP_INSTANCE_NAME.ovn-ovsdb-server-nb
+snapctl stop --disable $SNAP_INSTANCE_NAME.ovs-vswitchd
+snapctl stop --disable $SNAP_INSTANCE_NAME.ovn-northd
+snapctl stop --disable $SNAP_INSTANCE_NAME.ovn-controller
+
+snapctl stop --disable $SNAP_INSTANCE_NAME.iscsid
+snapctl stop --disable $SNAP_INSTANCE_NAME.target
+
+# No meaningful default backend is available yet.
+snapctl stop --disable $SNAP_INSTANCE_NAME.cinder-backup
+# Will only be enabled based on the answers during initialization.
+snapctl stop --disable $SNAP_INSTANCE_NAME.setup-lvm-loopdev
+# Will only be enabled if a backend is chosen to be configured by the user.
+snapctl stop --disable $SNAP_INSTANCE_NAME.cinder-volume
+
+
 mkdir -p $SNAP_DATA/lib/libvirt/images
+mkdir -p ${SNAP_COMMON}/log/libvirt/qemu
+# NOTE(dmitriis): there is currently no way to make sure this directory gets
+# recreated on reboot which would normally be done via systemd-tmpfiles.
+mkdir -p /run/lock/snap.$SNAP_INSTANCE_NAME
+
+# Copy TEMPLATE.qemu into the common directory. Libvirt generates additional
+# policy dynamically which is why its apparmor directory is writeable under $SNAP_COMMON.
+# Also copy other abstractions that are used by this template.
+rsync -rh $SNAP/etc/apparmor.d $SNAP_COMMON/etc
 
 # MySQL snapshot for speedy install
 # snapshot is a mysql data dir with
@@ -24,4 +61,32 @@ done
 # Make a place for our horizon config overrides to live
 mkdir -p ${SNAP_COMMON}/etc/horizon/local_settings.d
 
+# ----- OVN -----
+# Lay out directories used for OVN configuration and persistent data
+for dir in etc/ovn var/lib/ovn var/log/ovn var/run/ovn; do
+    if [ ! -d $SNAP_COMMON/$dir ]; then
+        mkdir -p $SNAP_COMMON/$dir
+    fi
+done
+
+# Prepare access to the hosting systems Open vSwitch instance
+# NOTE end user must execute `snap connect ovn:openvswitch` for this to work
+ln -s /var/run/openvswitch $SNAP_COMMON/var/run/openvswitch
+
+# The `ovn-ctl` script does not have enough knobs for useful tailoring of
+# execution of the `ovn-northd` daemon.  Instead it provides a file to pass
+# arguments directly to the `ovn-northd` process.
+#
+# We fill the `args_northd` with necessary defaults and link to the file
+# `ovn-ctl` looks for.
+#
+# For other daemons the corrensponding args_* file is used to pass arguments to
+# `ovn-ctl`.
+cat << EOF > $SNAP_COMMON/args_northd
+--ovnnb-db=unix:$SNAP_COMMON/run/ovn/ovnnb_db.sock
+--ovnsb-db=unix:$SNAP_COMMON/run/ovn/ovnsb_db.sock
+EOF
+ln -s $SNAP_COMMON/args_northd $SNAP_COMMON/etc/ovn/ovn-northd-db-params.conf
+# ----- END OVN -----
+
 snap-openstack setup  # Sets up templates for the first time.

snap/hooks/post-refresh

@@ -1,6 +1,9 @@
 #!/bin/bash
 set -ex
 
+# Refresh the TEMPLATE.qemu apparmor profile and abstractions.
+rsync -rh $SNAP/etc/apparmor.d $SNAP_COMMON/etc
+
 if [ -z "$(snapctl get config)" ]; then
     # [2019-11-15] Handle build 171 (beta) -> 182
 
@@ -30,4 +33,7 @@ if [ -z "$(snapctl get config.network.ports.rabbit)" ]; then
         snapctl set config.network.ports.rabbit=5672
 fi
 
+mkdir -p ${SNAP_COMMON}/log/libvirt/qemu
+mkdir -p /run/lock/snap.$SNAP_INSTANCE_NAME
+
 snap-openstack setup  # Write any template changes.

snap/hooks/remove

@@ -0,0 +1,79 @@
+#!/usr/bin/env python3
+
+import os
+import sys
+import logging
+from subprocess import check_call, check_output, call, run
+from pyroute2 import netns
+
+logging.basicConfig(stream=sys.stdout, level=logging.DEBUG)
+
+
+if __name__ == '__main__':
+    # Work around the lack of modified LD_LIBRARY_PATH and PATH variables with
+    # snap-specific content.
+    snap_dir = os.environ['SNAP']
+    snap_libs = (f'{snap_dir}/lib:{snap_dir}/usr/lib:'
+                 f'{snap_dir}/lib/x86_64-linux-gnu:'
+                 f'{snap_dir}/usr/lib/x86_64-linux-gnu')
+    os.environ['LD_LIBRARY_PATH'] = snap_libs
+
+    check_call(['snapctl', 'start', 'microstack.ovsdb-server'])
+    check_call(['snapctl', 'start', 'microstack.ovs-vswitchd'])
+
+    logging.info('Attempting to remove br-ex.')
+    check_call(['ovs-vsctl', '--if-exists', 'del-br', 'br-ex'])
+
+    check_call(['snapctl', 'stop', 'microstack.ovsdb-server'])
+    check_call(['snapctl', 'stop', 'microstack.ovs-vswitchd'])
+
+    for ns in netns.listnetns():
+        if ns.startswith('ovnmeta-'):
+            logging.info(f'Removing the {ns} network namespace.')
+            netns.remove(ns)
+
+    # Need to expose targets prior to starting iscsid in order to properly log out
+    # of iSCSI sessions.
+    check_call(['snapctl', 'start', 'microstack.target'])
+    check_call(['snapctl', 'start', 'microstack.iscsid'])
+    check_call(['sync'])
+
+    # Assuming the QEMU processes have already been killed by snapd,
+    # log out of all targets prior to removing the snap to clean up
+    # the kernel state.
+    # TODO: be more selective about logging out since there may be sessions
+    # unrelated to MicroStack in the kernel.
+    # TODO: also clean up block devices by writing to
+    # /sys/class/block/<dev>/device/delete since those do not get deleted on
+    # session logout.
+    logging.info('Attempting to remove iscsi sessions from the kernel.')
+    res = run(['iscsiadm', '-m', 'node', '-u'])
+    # ISCSI_ERR_NO_OBJS_FOUND
+    if res.returncode == 21:
+        logging.debug('No iscsi sessions were found.')
+    elif res.returncode == 0:
+        logging.debug('Successfully logged the existing iscsi sessions out.')
+    else:
+        # Albeit this is an error condition we cannot do much in the remove
+        # hook to fix this besides logging since snapd does not stop the
+        # snap removal on error in the remove hook.
+        logging.error('Unexpected error code received from iscsiadm: '
+                      f'{res.returncode}')
+    check_call(['snapctl', 'stop', 'microstack.iscsid'])
+    check_call(['snapctl', 'stop', 'microstack.target'])
+
+    # File-backed LVM resource cleanup (if present).
+    loop_file = f'{os.environ["SNAP_COMMON"]}/cinder-lvm.img'
+    allocated_loop_dev = check_output(
+            f'losetup -j {loop_file} | cut -d ":" -f 1', shell=True
+    ).decode('utf-8').strip()
+
+    if allocated_loop_dev:
+        cinder_lvm_vg = check_output([
+            'snapctl', 'get', 'config.cinder.lvm-backend-volume-group']
+        ).strip()
+        if not call(['vgdisplay', cinder_lvm_vg]):
+            check_call(['vgremove', '-f', cinder_lvm_vg])
+        if not call(['pvdisplay', allocated_loop_dev]):
+            check_call(['pvremove', '-f', allocated_loop_dev])
+        check_call(['losetup', '-d', allocated_loop_dev])

tests/basic-test.sh

@@ -36,8 +36,8 @@ do
     esac
 done
 
-if [ ! -f microstack_stein_amd64.snap ]; then
+if [ ! -f microstack_ussuri_amd64.snap ]; then
-   echo "microstack_stein_amd64.snap not found."
+   echo "microstack_ussuri_amd64.snap not found."
    echo "Please run snapcraft before executing the tests."
    exit 1
 fi
@@ -72,7 +72,7 @@ if [ "$PREFIX" == "multipass" ]; then
     PREFIX="multipass exec $MACHINE --"
 
     multipass launch --cpus 2 --mem 16G $DISTRO --name $MACHINE
-    multipass copy-files microstack_stein_amd64.snap $MACHINE:
+    multipass copy-files microstack_ussuri_amd64.snap $MACHINE:
 
     HORIZON_IP=`multipass info $MACHINE | grep IPv4 | cut -d":" -f2 \
         | tr -d '[:space:]'`
@@ -80,11 +80,32 @@ fi
 
 # Possibly install a release of the snap before running a test.
 if [ "${UPGRADE_FROM}" != "none" ]; then
-    $PREFIX sudo snap install --classic --${UPGRADE_FROM} microstack
+    $PREFIX sudo snap install --${UPGRADE_FROM} microstack
 fi
 
 # Install the snap under test -- try again if the machine is not yet ready.
-$PREFIX sudo snap install --classic --dangerous microstack*.snap
+$PREFIX sudo snap install --dangerous microstack*.snap
+$PREFIX sudo snap connect microstack:libvirt
+$PREFIX sudo snap connect microstack:netlink-audit
+$PREFIX sudo snap connect microstack:firewall-control
+$PREFIX sudo snap connect microstack:hardware-observe
+$PREFIX sudo snap connect microstack:kernel-module-observe
+$PREFIX sudo snap connect microstack:kvm
+$PREFIX sudo snap connect microstack:log-observe
+$PREFIX sudo snap connect microstack:mount-observe
+$PREFIX sudo snap connect microstack:netlink-connector
+$PREFIX sudo snap connect microstack:network-observe
+$PREFIX sudo snap connect microstack:openvswitch-support
+$PREFIX sudo snap connect microstack:process-control
+$PREFIX sudo snap connect microstack:system-observe
+$PREFIX sudo snap connect microstack:network-control
+$PREFIX sudo snap connect microstack:system-trace
+$PREFIX sudo snap connect microstack:block-devices
+$PREFIX sudo snap connect microstack:raw-usb
+$PREFIX sudo snap connect microstack:hugepages-control
+# $PREFIX sudo snap connect microstack:microstack-support
+
+
 $PREFIX sudo /snap/bin/microstack.init --auto
 
 # Comment out the above and uncomment below to install the version of

tests/framework.py

@@ -82,7 +82,7 @@ class Host():
         self.machine = ''
         self.distro = os.environ.get('DISTRO') or 'bionic'
         self.snap = os.environ.get('SNAP_FILE') or \
-            'microstack_stein_amd64.snap'
+            'microstack_ussuri_amd64.snap'
         self.horizon_ip = '10.20.20.1'
         self.host_type = 'localhost'
 
@@ -91,17 +91,34 @@ class Host():
             print("Booting a Multipass VM ...")
             self.multipass()
 
+        self.microstack_test()
+
     def install(self, snap=None, channel='dangerous'):
         if snap is None:
             snap = self.snap
         print("Installing {}".format(snap))
 
-        check(*self.prefix, 'sudo', 'snap', 'install', '--devmode',
+        check(*self.prefix, 'sudo', 'snap', 'install',
-              '--{}'.format(channel), snap)
+              '--{}'.format(channel), '--devmode', snap)
 
-    def init(self, flag='auto'):
+        # TODO: add microstack-support once it is merged into snapd.
-        print("Initializing the snap with --{}".format(flag))
+        connections = [
-        check(*self.prefix, 'sudo', 'microstack.init', '--{}'.format(flag))
+                'microstack:libvirt', 'microstack:netlink-audit',
+                'microstack:firewall-control', 'microstack:hardware-observe',
+                'microstack:kernel-module-observe', 'microstack:kvm',
+                'microstack:log-observe', 'microstack:mount-observe',
+                'microstack:netlink-connector', 'microstack:network-observe',
+                'microstack:openvswitch-support', 'microstack:process-control',
+                'microstack:system-observe', 'microstack:network-control',
+                'microstack:system-trace', 'microstack:block-devices',
+                'microstack:raw-usb'
+        ]
+        for connection in connections:
+            check('sudo', 'snap', 'connect', connection)
+
+    def init(self, args=['--auto']):
+        print(f"Initializing the snap with {args}")
+        check(*self.prefix, 'sudo', 'microstack.init', *args)
 
     def multipass(self):
         self.machine = petname.generate()
@@ -119,6 +136,9 @@ class Host():
         info = json.loads(info)
         self.horizon_ip = info['info'][self.machine]['ipv4'][0]
 
+    def microstack_test(self):
+        check('sudo', 'snap', 'install', 'microstack-test')
+
     def dump_logs(self):
         # TODO: make unique log name
         if check_output('whoami') == 'zuul':

tests/test_basic.py

@@ -17,6 +17,7 @@ Web IDE.
 import os
 import sys
 import time
+import json
 import unittest
 
 sys.path.append(os.getcwd())
@@ -35,7 +36,11 @@ class TestBasics(Framework):
         """
         host = self.get_host()
         host.install()
-        host.init()
+        host.init([
+            '--auto',
+            '--setup-loop-based-cinder-lvm-backend',
+            '--loop-device-file-size=32'
+            ])
         prefix = host.prefix
 
         endpoints = check_output(
@@ -71,13 +76,35 @@ class TestBasics(Framework):
         # Check to verify that our bridge is there.
         self.assertTrue('br-ex' in check_output(*prefix, 'ip', 'a'))
 
-        # Try to uninstall snap without sudo.
+        check(*prefix, 'sudo', 'mkdir', '-p', '/tmp/snap.microstack-test/tmp')
-        self.assertFalse(call(*prefix, '/snap/bin/microstack.remove',
+        check(*prefix, 'sudo', 'cp',
-                              '--purge', '--auto'))
+              '/var/snap/microstack/common/etc/microstack.json',
+              '/tmp/snap.microstack-test/tmp/microstack.json')
+        check(*prefix, 'microstack-test.rally', 'db', 'recreate')
+        check(*prefix, 'microstack-test.rally', 'deployment', 'create',
+              '--filename', '/tmp/microstack.json',
+              '--name', 'snap_generated')
+        check(*prefix, 'microstack-test.tempest-init')
+        check(*prefix, 'microstack-test.rally', 'verify', 'start',
+              '--load-list',
+              '/snap/microstack-test/current/2020.06-test-list.txt',
+              '--detailed', '--concurrency', '2')
+        check(*prefix, 'microstack-test.rally', 'verify', 'report',
+              '--type', 'json', '--to',
+              '/tmp/verification-report.json')
+        report = json.loads(check_output(
+            *prefix, 'sudo', 'cat',
+            '/tmp/snap.microstack-test/tmp/verification-report.json'))
+        # Make sure there are no verification failures in the report.
+        failures = list(report['verifications'].values())[0]['failures']
+        self.assertEqual(failures, 0, 'Verification tests had failure.')
+
+        # Try to remove the snap without sudo.
+        self.assertFalse(
+                call(*prefix, 'snap', 'remove', '--purge', 'microstack'))
 
         # Retry with sudo (should succeed).
-        check(*prefix, 'sudo', '/snap/bin/microstack.remove',
+        check(*prefix, 'sudo', 'snap', 'remove', '--purge', 'microstack')
-              '--purge', '--auto')
 
         # Verify that MicroStack is gone.
         self.assertFalse(call(*prefix, 'snap', 'list', 'microstack'))

tests/test_cluster.py

@@ -34,7 +34,7 @@ class TestCluster(Framework):
         openstack = '/snap/bin/microstack.openstack'
         control_host = self.get_host()
         control_host.install()
-        control_host.init(flag='control')
+        control_host.init(['--control'])
 
         control_prefix = control_host.prefix
         cluster_password = check_output(*control_prefix, 'sudo', 'snap',

tests/test_control.py

@@ -26,7 +26,7 @@ class TestControlNode(Framework):
 
         host = self.get_host()
         host.install()
-        host.init(flag='control')
+        host.init(['--control'])
 
         print("Checking output of services ...")
         services = check_output(

tools/cluster/cluster/client.py

@@ -1,3 +1,5 @@
+#!/usr/bin/env python3
+
 import json
 
 import requests

tools/init/init/main.py

@@ -34,6 +34,7 @@ import logging
 import secrets
 import string
 import sys
+import socket
 
 from functools import wraps
 
@@ -55,6 +56,15 @@ def requires_sudo(func):
     return wrapper
 
 
+def check_file_size_positive(value):
+    ival = int(value)
+    if ival < 1:
+        raise argparse.ArgumentTypeError(
+                f'The file size for a loop device'
+                f' must be larger than 1GB, current: {value}')
+    return ival
+
+
 def parse_init_args():
     parser = argparse.ArgumentParser()
     parser.add_argument('--auto', '-a', action='store_true',
@@ -63,6 +73,18 @@ def parse_init_args():
     parser.add_argument('--compute', action='store_true')
     parser.add_argument('--control', action='store_true')
     parser.add_argument('--debug', action='store_true')
+    parser.add_argument(
+            '--setup-loop-based-cinder-lvm-backend',
+            action='store_true',
+            help='(experimental) set up a loop device-backed'
+                 ' LVM backend for Cinder.'
+    )
+    parser.add_argument(
+            '--loop-device-file-size',
+            type=check_file_size_positive, default=32,
+            help=('File size in GB (10^9) of a file to be exposed as a loop'
+                  ' device for the Cinder LVM backend.')
+    )
     args = parser.parse_args()
     return args
 
@@ -100,6 +122,12 @@ def process_init_args(args):
     if args.debug:
         log.setLevel(logging.DEBUG)
 
+    check('snapctl', 'set',
+          f'config.cinder.setup-loop-based-cinder-lvm-backend='
+          f'{str(args.setup_loop_based_cinder_lvm_backend).lower()}')
+    check('snapctl', 'set',
+          f'config.cinder.loop-device-file-size={args.loop_device_file_size}G')
+
     return auto
 
 
@@ -110,7 +138,8 @@ def init() -> None:
 
     question_list = [
         questions.Clustering(),
-        questions.Dns(),
+        questions.DnsServers(),
+        questions.DnsDomain(),
         questions.NetworkSettings(),
         questions.OsPassword(),  # TODO: turn this off if COMPUTE.
         questions.ForceQemu(),
@@ -120,11 +149,15 @@ def init() -> None:
         questions.DashboardAccess(),
         questions.RabbitMq(),
         questions.DatabaseSetup(),
+        questions.PlacementSetup(),
         questions.NovaHypervisor(),
         questions.NovaControlPlane(),
+        questions.NovaSpiceConsoleSetup(),
         questions.NeutronControlPlane(),
         questions.GlanceSetup(),
         questions.SecurityRules(),
+        questions.CinderSetup(),
+        questions.CinderVolumeLVMSetup(),
         questions.PostSetup(),
         questions.ExtraServicesQuestion(),
     ]
@@ -160,7 +193,8 @@ def set_network_info() -> None:
     check('snapctl', 'set', 'config.network.ext-gateway={}'.format(gate))
     check('snapctl', 'set', 'config.network.ext-cidr={}'.format(cidr))
     check('snapctl', 'set', 'config.network.control-ip={}'.format(ip))
-    check('snapctl', 'set', 'config.network.control-ip={}'.format(ip))
+    check('snapctl', 'set',
+          'config.network.node-fqdn={}'.format(socket.getfqdn()))
 
 
 @requires_sudo

tools/init/init/questions/__init__.py

@@ -28,7 +28,7 @@ from time import sleep
 from os import path
 
 from init.shell import (check, call, check_output, sql, nc_wait, log_wait,
-                        restart, download)
+                        start, restart, download, disable, enable)
 from init.config import Env, log
 from init.questions.question import Question
 from init.questions import clustering, network, uninstall  # noqa F401
@@ -104,7 +104,7 @@ class Clustering(Question):
         # Turn off cluster server
         # TODO: it would be more secure to reverse this -- only enable
         # to service if we are doing clustering.
-        check('snapctl', 'stop', '--disable', 'microstack.cluster-server')
+        disable('cluster-server')
 
 
 class ConfigQuestion(Question):
@@ -138,32 +138,36 @@ class ConfigQuestion(Question):
                 _env[key.strip()] = val.strip()
 
 
-class Dns(Question):
+class DnsServers(ConfigQuestion):
-    """Possibly override default dns."""
+    """Provide default DNS forwarders for MicroStack to use."""
 
     _type = 'string'
-    _question = 'DNS to use'
+    _question = 'Upstream DNS servers to be used by instances (VMs)'
-    config_key = 'config.network.dns'
+    config_key = 'config.network.dns-servers'
 
     def yes(self, answer: str):
-        """Override the default dhcp_agent.ini file."""
-
-        file_path = '{SNAP_COMMON}/etc/neutron/dhcp_agent.ini'.format(**_env)
-
-        with open(file_path, 'w') as f:
-            f.write("""\
-[DEFAULT]
-interface_driver = openvswitch
-dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq
-enable_isolated_metadata = True
-dnsmasq_dns_servers = {answer}
-""".format(answer=answer))
-
         # Neutron is not actually started at this point, so we don't
         # need to restart.
         # TODO: This isn't idempotent, because it will behave
         # differently if we re-run this script when neutron *is*
         # started. Need to figure that out.
+        pass
+
+
+class DnsDomain(ConfigQuestion):
+    """An internal DNS domain to be used for ML2 DNS."""
+
+    _type = 'string'
+    _question = 'An internal DNS domain to be used for ML2 DNS'
+    config_key = 'config.network.dns-domain'
+
+    def yes(self, answer: str):
+        # Neutron is not actually started at this point, so we don't
+        # need to restart.
+        # TODO: This isn't idempotent, because it will behave
+        # differently if we re-run this script when neutron *is*
+        # started. Need to figure that out.
+        pass
 
 
 class NetworkSettings(Question):
@@ -174,19 +178,46 @@ class NetworkSettings(Question):
     def yes(self, answer):
         log.info('Configuring networking ...')
 
-        # OpenvSwitch services may not have started up properly
+        role = check_output('snapctl', 'get', 'config.cluster.role')
-        restart('ovsdb-server')
+
-        restart('ovs-vswitchd')
+        # Enable and start the services.
+        enable('ovsdb-server')
+        enable('ovs-vswitchd')
+        enable('ovn-ovsdb-server-sb')
+        enable('ovn-ovsdb-server-nb')
 
         network.ExtGateway().ask()
         network.ExtCidr().ask()
 
+        if role == 'control':
+            nb_conn = 'unix:{SNAP_COMMON}/run/ovn/ovnnb_db.sock'.format(**_env)
+            sb_conn = 'unix:{SNAP_COMMON}/run/ovn/ovnsb_db.sock'.format(**_env)
+        elif role == 'compute':
+            control_ip = check_output('snapctl', 'get',
+                                      'config.network.control-ip')
+            sb_conn = f'tcp:{control_ip}:6642'
+            # Not used by any compute node services.
+            nb_conn = ''
+        else:
+            raise Exception(f'Unexpected node role: {role}')
+
+        # Configure OVN SB and NB sockets based on the role node. For
+        # single-node deployments there is no need to use a TCP socket.
+        check_output('snapctl', 'set',
+                     f'config.network.ovn-nb-connection={nb_conn}')
+        check_output('snapctl', 'set',
+                     f'config.network.ovn-sb-connection={sb_conn}')
+
         # Now that we have default or overriden values, setup the
         # bridge and write all the proper values into our config
         # files.
         check('setup-br-ex')
         check('snap-openstack', 'setup')
 
+        if role == 'control':
+            enable('ovn-northd')
+            enable('ovn-controller')
+
         network.IpForwarding().ask()
 
 
@@ -296,7 +327,7 @@ class RabbitMq(Question):
 
     def no(self, answer: str):
         log.info('Disabling local rabbit ...')
-        check('snapctl', 'stop', '--disable', 'microstack.rabbitmq-server')
+        disable('rabbitmq-server')
 
 
 class DatabaseSetup(Question):
@@ -315,16 +346,17 @@ class DatabaseSetup(Question):
     def _create_dbs(self) -> None:
         # TODO: actually use passwords here.
         for db in ('neutron', 'nova', 'nova_api', 'nova_cell0', 'cinder',
-                   'glance', 'keystone'):
+                   'glance', 'keystone', 'placement'):
-            sql("CREATE DATABASE IF NOT EXISTS {db};".format(db=db))
+            sql("CREATE USER IF NOT EXISTS '{db}'@'{control_ip}'"
-            sql(
+                " IDENTIFIED BY '{db}';".format(db=db, **_env))
-                "GRANT ALL PRIVILEGES ON {db}.* TO {db}@{control_ip} \
+            sql("CREATE DATABASE IF NOT EXISTS `{db}`;".format(db=db))
-                IDENTIFIED BY '{db}';".format(db=db, **_env))
+            sql("GRANT ALL PRIVILEGES ON {db}.* TO '{db}'@'{control_ip}';"
+                "".format(db=db, **_env))
 
         # Grant nova user access to cell0
         sql(
-            "GRANT ALL PRIVILEGES ON nova_cell0.* TO 'nova'@'{control_ip}' \
+            "GRANT ALL PRIVILEGES ON nova_cell0.* TO 'nova'@'{control_ip}';"
-            IDENTIFIED BY \'nova';".format(**_env))
+            "".format(**_env))
 
     def _bootstrap(self) -> None:
 
@@ -337,7 +369,8 @@ class DatabaseSetup(Question):
               '--bootstrap-password', _env['ospassword'],
               '--bootstrap-admin-url', bootstrap_url,
               '--bootstrap-internal-url', bootstrap_url,
-              '--bootstrap-public-url', bootstrap_url)
+              '--bootstrap-public-url', bootstrap_url,
+              '--bootstrap-region-id', 'microstack')
 
     def yes(self, answer: str) -> None:
         """Setup Databases.
@@ -355,8 +388,8 @@ class DatabaseSetup(Question):
 
         # Start keystone-uwsgi. We use snapctl, because systemd
         # doesn't yet know about the service.
-        check('snapctl', 'start', 'microstack.nginx')
+        start('nginx')
-        check('snapctl', 'start', 'microstack.keystone-uwsgi')
+        start('keystone-uwsgi')
 
         log.info('Configuring Keystone Fernet Keys ...')
         check('snap-openstack', 'launch', 'keystone-manage',
@@ -382,7 +415,7 @@ class DatabaseSetup(Question):
         check('snapctl', 'set', 'database.ready=true')
 
         log.info('Disabling local MySQL ...')
-        check('snapctl', 'stop', '--disable', 'microstack.mysqld')
+        disable('mysqld')
 
 
 class NovaHypervisor(Question):
@@ -404,11 +437,63 @@ class NovaHypervisor(Question):
                      'microstack', 'compute', endpoint,
                      'http://{compute_ip}:8774/v2.1'.format(**_env))
 
-        check('snapctl', 'start', 'microstack.nova-compute')
+        start('nova-compute')
 
     def no(self, answer):
         log.info('Disabling nova compute service ...')
-        check('snapctl', 'stop', '--disable', 'microstack.nova-compute')
+        disable('nova-compute')
+
+
+class NovaSpiceConsoleSetup(Question):
+    """Run the Spice HTML5 console proxy service"""
+
+    _type = 'boolean'
+    config_key = 'config.services.spice-console'
+
+    def yes(self, answer):
+        log.info('Configuring the Spice HTML5 console service...')
+        start('nova-spicehtml5proxy')
+
+    def no(self, answer):
+        log.info('Disabling nova compute service ...')
+        disable('nova-spicehtml5proxy')
+
+
+class PlacementSetup(Question):
+    """Setup Placement services."""
+
+    _type = 'boolean'
+    config_key = 'config.services.control-plane'
+
+    def yes(self, answer: str) -> None:
+        log.info('Configuring the Placement service...')
+
+        if not call('openstack', 'user', 'show', 'placement'):
+            check('openstack', 'user', 'create', '--domain', 'default',
+                  '--password', 'placement', 'placement')
+            check('openstack', 'role', 'add', '--project', 'service',
+                  '--user', 'placement', 'admin')
+
+        if not call('openstack', 'service', 'show', 'placement'):
+            check('openstack', 'service', 'create', '--name',
+                  'placement', '--description', '"Placement API"',
+                  'placement')
+
+            for endpoint in ['public', 'internal', 'admin']:
+                call('openstack', 'endpoint', 'create', '--region',
+                     'microstack', 'placement', endpoint,
+                     'http://{control_ip}:8778'.format(**_env))
+
+        start('placement-uwsgi')
+
+        log.info('Running Placement DB migrations...')
+        check('snap-openstack', 'launch', 'placement-manage', 'db', 'sync')
+
+        restart('placement-uwsgi')
+
+    def no(self, answer):
+        log.info('Disabling the Placement service...')
+        disable('placement-uwsgi')
 
 
 class NovaControlPlane(Question):
@@ -446,31 +531,14 @@ class NovaControlPlane(Question):
             check('openstack', 'role', 'add', '--project',
                   'service', '--user', 'nova', 'admin')
 
-        if not call('openstack', 'user', 'show', 'placement'):
-            check('openstack', 'user', 'create', '--domain', 'default',
-                  '--password', 'placement', 'placement')
-            check('openstack', 'role', 'add', '--project', 'service',
-                  '--user', 'placement', 'admin')
-
-        if not call('openstack', 'service', 'show', 'placement'):
-            check('openstack', 'service', 'create', '--name',
-                  'placement', '--description', '"Placement API"',
-                  'placement')
-
-            for endpoint in ['public', 'internal', 'admin']:
-                call('openstack', 'endpoint', 'create', '--region',
-                     'microstack', 'placement', endpoint,
-                     'http://{control_ip}:8778'.format(**_env))
-
         # Use snapctl to start nova services.  We need to call them
         # out manually, because systemd doesn't know about them yet.
         # TODO: parse the output of `snapctl services` to get this
         # list automagically.
-        for service in [
+        start('nova-api')
-                'microstack.nova-api',
-        ]:
-            check('snapctl', 'start', service)
 
+        log.info('Running Nova API DB migrations'
+                 ' (this will take a lot of time)...')
         check('snap-openstack', 'launch', 'nova-manage', 'api_db', 'sync')
 
         if 'cell0' not in check_output('snap-openstack', 'launch',
@@ -485,18 +553,19 @@ class NovaControlPlane(Question):
             check('snap-openstack', 'launch', 'nova-manage', 'cell_v2',
                   'create_cell', '--name=cell1', '--verbose')
 
+        log.info('Running Nova DB migrations'
+                 ' (this will take a lot of time)...')
         check('snap-openstack', 'launch', 'nova-manage', 'db', 'sync')
 
         restart('nova-api')
         restart('nova-compute')
 
         for service in [
-                'microstack.nova-api-metadata',
+                'nova-api-metadata',
-                'microstack.nova-conductor',
+                'nova-conductor',
-                'microstack.nova-scheduler',
+                'nova-scheduler',
-                'microstack.nova-uwsgi',
         ]:
-            check('snapctl', 'start', service)
+            start(service)
 
         nc_wait(_env['compute_ip'], '8774')
 
@@ -509,13 +578,92 @@ class NovaControlPlane(Question):
         log.info('Disabling nova control plane services ...')
 
         for service in [
-                'microstack.nova-uwsgi',
+                'nova-api',
-                'microstack.nova-api',
+                'nova-conductor',
-                'microstack.nova-conductor',
+                'nova-scheduler',
-                'microstack.nova-scheduler',
+                'nova-api-metadata']:
-                'microstack.nova-api-metadata']:
+            disable(service)
 
-            check('snapctl', 'stop', '--disable', service)
+
+class CinderSetup(Question):
+    """Setup Placement services."""
+
+    _type = 'boolean'
+    config_key = 'config.services.control-plane'
+
+    def yes(self, answer: str) -> None:
+        log.info('Configuring the Cinder services...')
+
+        if not call('openstack', 'user', 'show', 'cinder'):
+            check('openstack', 'user', 'create', '--domain', 'default',
+                  '--password', 'cinder', 'cinder')
+            check('openstack', 'role', 'add', '--project', 'service',
+                  '--user', 'cinder', 'admin')
+
+        control_ip = _env['control_ip']
+        for endpoint in ['public', 'internal', 'admin']:
+            for api_version in ['v2', 'v3']:
+                if not call('openstack', 'service', 'show',
+                            f'cinder{api_version}'):
+                    check('openstack', 'service', 'create', '--name',
+                          f'cinder{api_version}', '--description',
+                          f'"Cinder {api_version} API"',
+                          f'volume{api_version}')
+                if not check_output(
+                        'openstack', 'endpoint', 'list',
+                        '--service', f'volume{api_version}', '--interface',
+                        endpoint):
+                    check(
+                            'openstack', 'endpoint', 'create', '--region',
+                            'microstack', f'volume{api_version}', endpoint,
+                            f'http://{control_ip}:8776/{api_version}/'
+                            '$(project_id)s'
+                    )
+        restart('cinder-uwsgi')
+
+        log.info('Running Cinder DB migrations...')
+        check('snap-openstack', 'launch', 'cinder-manage', 'db', 'sync')
+
+        restart('cinder-uwsgi')
+        restart('cinder-scheduler')
+
+    def no(self, answer):
+        log.info('Disabling Cinder services...')
+
+        for service in [
+                'cinder-uwsgi',
+                'cinder-scheduler',
+                'cinder-volume',
+                'cinder-backup']:
+            disable(service)
+
+
+class CinderVolumeLVMSetup(Question):
+    """Setup cinder-volume with LVM."""
+
+    _type = 'boolean'
+    config_key = 'config.cinder.setup-loop-based-cinder-lvm-backend'
+    _question = ('(experimental) Do you want to setup a loop device-backed LVM'
+                 ' volume backend for Cinder?')
+    interactive = True
+
+    def yes(self, answer: bool) -> None:
+        check('snapctl', 'set',
+              f'config.cinder.setup-loop-based-cinder-lvm-backend'
+              f'={str(answer).lower()}')
+        log.info('Setting up cinder-volume service with the LVM backend...')
+        enable('setup-lvm-loopdev')
+        enable('cinder-volume')
+        enable('target')
+        enable('iscsid')
+
+    def no(self, answer: bool) -> None:
+        check('snapctl', 'set', f'config.cinder.lvm.setup-file-backed-lvm='
+                                f'{str(answer).lower()}')
+        disable('setup-lvm-loopdev')
+        disable('cinder-volume')
+        disable('iscsid')
+        disable('target')
 
 
 class NeutronControlPlane(Question):
@@ -541,26 +689,16 @@ class NeutronControlPlane(Question):
                      'microstack', 'network', endpoint,
                      'http://{control_ip}:9696'.format(**_env))
 
-        for service in [
+        start('neutron-api')
-                'microstack.neutron-api',
-                'microstack.neutron-dhcp-agent',
-                'microstack.neutron-l3-agent',
-                'microstack.neutron-metadata-agent',
-                'microstack.neutron-openvswitch-agent',
-        ]:
-            check('snapctl', 'start', service)
 
         check('snap-openstack', 'launch', 'neutron-db-manage', 'upgrade',
               'head')
 
         for service in [
-                'microstack.neutron-api',
+                'neutron-api',
-                'microstack.neutron-dhcp-agent',
+                'neutron-ovn-metadata-agent',
-                'microstack.neutron-l3-agent',
-                'microstack.neutron-metadata-agent',
-                'microstack.neutron-openvswitch-agent',
         ]:
-            check('snapctl', 'restart', service)
+            restart(service)
 
         nc_wait(_env['control_ip'], '9696')
 
@@ -594,20 +732,23 @@ class NeutronControlPlane(Question):
         neutron on this machine.
 
         """
-        # Make sure that the agent is running.
+        # Make sure the necessary services are enabled and started.
         for service in [
-                'microstack.neutron-openvswitch-agent',
+                'ovs-vswitchd',
+                'ovsdb-server',
+                'ovn-controller',
+                'neutron-ovn-metadata-agent'
         ]:
-            check('snapctl', 'start', service)
+            enable(service)
 
         # Disable the other services.
         for service in [
-                'microstack.neutron-api',
+                'neutron-api',
-                'microstack.neutron-dhcp-agent',
+                'ovn-northd',
-                'microstack.neutron-metadata-agent',
+                'ovn-ovsdb-server-sb',
-                'microstack.neutron-l3-agent',
+                'ovn-ovsdb-server-nb',
         ]:
-            check('snapctl', 'stop', '--disable', service)
+            disable(service)
 
 
 class GlanceSetup(Question):
@@ -660,10 +801,10 @@ class GlanceSetup(Question):
                       'http://{compute_ip}:9292'.format(**_env))
 
         for service in [
-                'microstack.glance-api',
+                'glance-api',
-                'microstack.registry',  # TODO rename to glance-registery
+                'registry',  # TODO rename to glance-registery
         ]:
-            check('snapctl', 'start', service)
+            start(service)
 
         check('snap-openstack', 'launch', 'glance-manage', 'db_sync')
 
@@ -677,8 +818,8 @@ class GlanceSetup(Question):
         self._fetch_cirros()
 
     def no(self, answer):
-        check('snapctl', 'stop', '--disable', 'microstack.glance-api')
+        disable('glance-api')
-        check('snapctl', 'stop', '--disable', 'microstack.registry')
+        disable('registry')
 
 
 class SecurityRules(Question):
@@ -725,9 +866,9 @@ class PostSetup(Question):
         # TODO: fix issue.
         restart('libvirtd')
         restart('virtlogd')
+        restart('nova-compute')
 
-        # Start horizon
+        restart('horizon-uwsgi')
-        check('snapctl', 'start', 'microstack.horizon-uwsgi')
 
         check('snapctl', 'set', 'initialized=true')
         log.info('Complete. Marked microstack as initialized!')
@@ -739,13 +880,13 @@ class SimpleServiceQuestion(Question):
         log.info('enabling and starting ' + self.__class__.__name__)
 
         for service in self.services:
-            check('snapctl', 'start', '--enable', service)
+            enable(service)
 
         log.info(self.__class__.__name__ + ' enabled')
 
     def no(self, answer):
         for service in self.services:
-            check('snapctl', 'stop', '--disable', service)
+            disable(service)
 
 
 class ExtraServicesQuestion(Question):

tools/init/init/questions/uninstall.py

@@ -2,7 +2,7 @@ import sys
 
 from init.config import Env, log
 from init.questions.question import Question
-from init.shell import check, call
+from init.shell import call
 
 _env = Env().get_env()
 
@@ -29,7 +29,6 @@ class DeleteBridge(Question):
 
 # TODO: cleanup system optimizations
 # TODO: cleanup kernel modules?
-# TODO: cleanup iptables rules
 
 
 class RemoveMicrostack(Question):
@@ -40,8 +39,4 @@ class RemoveMicrostack(Question):
 
     def yes(self, answer):
         """Uninstall MicroStack, passing any command line options to snapd."""
-
         log.info('Uninstalling MicroStack (this may take a while) ...')
-        check('snap', 'remove', '{SNAP_INSTANCE_NAME}'.format(**_env),
-              *ARGS)
-        log.info('MicroStack has been removed from your system!')

tools/init/init/shell.py

@@ -129,6 +129,16 @@ def log_wait(log: str, message: str) -> None:
         sleep(1)
 
 
+def start(service: str) -> None:
+    """Start a microstack service.
+
+    :param service: the service(s) to be started. Can contain wild cards.
+                    e.g. *rabbit*
+
+    """
+    check('snapctl', 'start', 'microstack.{}'.format(service))
+
+
 def restart(service: str) -> None:
     """Restart a microstack service.
 
@@ -139,6 +149,16 @@ def restart(service: str) -> None:
     check('snapctl', 'restart', 'microstack.{}'.format(service))
 
 
+def enable(service: str) -> None:
+    """Disable and mask a service.
+
+    :param service: the service(s) to be enabled. Can contain wild cards.
+                    e.g. *rabbit*
+
+    """
+    check('snapctl', 'start', '--enable', 'microstack.{}'.format(service))
+
+
 def disable(service: str) -> None:
     """Disable and mask a service.
 

tools/init/requirements.txt

@@ -1,4 +1,5 @@
-netaddr
+# netaddr is pinned to match the upper-constraints.txt file of Ussuri
+netaddr===0.7.19
 netifaces
-pymysql
+pymysql==0.9.3
 wget

tools/init/setup.py

@@ -9,7 +9,6 @@ setup(
         'console_scripts': [
             'microstack_init = init.main:init',
             'set_network_info = init.main:set_network_info',
-            'microstack_remove = init.main:remove',
         ],
     },
 )

tools/init/tests/test_question.py

@@ -7,7 +7,7 @@ import mock
 # TODO: drop in test runner and get rid of this line.
 sys.path.append(os.getcwd())  # noqa
 
-from init.questions.question import (Question, InvalidQuestion, InvalidAnswer)
+from init.questions.question import (Question, InvalidQuestion, InvalidAnswer) # noqa
 
 
 ##############################################################################

tools/lxd_build.sh

@@ -9,9 +9,11 @@ sudo apt update
 sudo apt install -y firefox-geckodriver python3-petname python3-selenium
 
 # Setup snapd and snapcraft
+# Install snapd if it isn't installed yet (needed to install the snapd snap itself).
 sudo apt install -y snapd
 
-# Build our snap!
+sudo snap install snapd
+
 sudo snap install --classic snapcraft
 sudo snap install lxd
 
@@ -22,4 +24,6 @@ newgrp lxd << END
 set -ex
 lxd init --auto
 snapcraft --use-lxd
+# Delete the build container to free the storage space on a test node.
+lxc delete snapcraft-microstack
 END

tools/make-a-microstack.sh

@@ -20,9 +20,49 @@ MACHINE=$(petname)
 multipass launch --cpus 2 --mem 16G $DISTRO --name $MACHINE
 
 # Install the snap
-multipass copy-files microstack_stein_amd64.snap $MACHINE:
+multipass copy-files microstack_ussuri_amd64.snap $MACHINE:
 multipass exec $MACHINE -- \
-          sudo snap install --classic --dangerous microstack*.snap
+          sudo snap install --dangerous microstack*.snap
+
+multipass exec $MACHINE -- \
+	  sudo snap connect microstack:libvirt
+multipass exec $MACHINE -- \
+	  sudo snap connect microstack:netlink-audit
+multipass exec $MACHINE -- \
+	  sudo snap connect microstack:firewall-control
+multipass exec $MACHINE -- \
+	  sudo snap connect microstack:hardware-observe
+multipass exec $MACHINE -- \
+	  sudo snap connect microstack:kernel-module-observe
+multipass exec $MACHINE -- \
+	  sudo snap connect microstack:kvm
+multipass exec $MACHINE -- \
+	  sudo snap connect microstack:log-observe
+multipass exec $MACHINE -- \
+	  sudo snap connect microstack:mount-observe
+multipass exec $MACHINE -- \
+	  sudo snap connect microstack:netlink-connector
+multipass exec $MACHINE -- \
+	  sudo snap connect microstack:network-observe
+multipass exec $MACHINE -- \
+	  sudo snap connect microstack:openvswitch-support
+multipass exec $MACHINE -- \
+	  sudo snap connect microstack:process-control
+multipass exec $MACHINE -- \
+	  sudo snap connect microstack:system-observe
+multipass exec $MACHINE -- \
+	  sudo snap connect microstack:network-control
+multipass exec $MACHINE -- \
+	  sudo snap connect microstack:system-trace
+multipass exec $MACHINE -- \
+	  sudo snap connect microstack:block-devices
+multipass exec $MACHINE -- \
+	  sudo snap connect microstack:raw-usb
+multipass exec $MACHINE -- \
+	  sudo snap connect microstack:hugepages-control
+# TODO: add the below once the interface is merge into snapd.
+# multipass exec $MACHINE -- \
+#	  sudo snap connect microstack:microstack-support
 
 # Drop the user into a snap shell, as root.
 multipass exec $MACHINE -- \

tools/setup-lvm-loopdev/setup-lvm-loopdev

@@ -0,0 +1,28 @@
+#!/bin/bash
+
+set -ex
+
+cinder_volumes_vg=`snapctl get config.cinder.lvm-backend-volume-group`
+if [ `snapctl get config.cinder.setup-loop-based-cinder-lvm-backend` = 'true' ]
+then
+	loop_file=$SNAP_COMMON/cinder-lvm.img
+	loop_file_size=`snapctl get config.cinder.loop-device-file-size`
+	# Create a file to hold an LVM PV+VG + LVs if it does not exist.
+	test -f $loop_file || fallocate -l $loop_file_size $loop_file
+	# Unless this file already has an associated loop device, associate a free loop device with it.
+	if [ -z `losetup -j $loop_file` ]
+	then
+		until losetup -f $loop_file
+		do
+			echo 'Waiting until the device cgroup entry is updated, see LP# 1892895'
+			sleep 1
+		done
+	fi
+
+	allocated_loop_dev=`losetup -j $loop_file | cut -d':' -f 1`
+	# Create a PV on the allocated loop device unless there is already one on it.
+	lvmdiskscan -l --config 'devices { filter = [ "a|'$allocated_loop_dev'|", "r|.*|" ] }' | grep -q '1 LVM' || (pvcreate $allocated_loop_dev && vgcreate $cinder_volumes_vg $allocated_loop_dev && exit 0)
+fi
+
+# Activate the logical volumes (relevant on node reboot).
+lvchange -a y $cinder_volumes_vg