packstack/docs/packstack.rst
Javier Pena 80be10d997 Remove Heat CloudWatch API
This API was deprecated, and finally removed from Heat in [1].

[1] - https://review.openstack.org/534660

Change-Id: Ie7400b14749591dac70067b67b747418451e75d5
2018-02-05 10:57:22 +01:00

56 KiB
Executable File

Packstack

SYNOPSIS

packstack [options]

DESCRIPTION

Packstack is a utility that uses puppet modules to install OpenStack. It can be used to install each OpenStack service on separate servers, an 'allinone' server, or any combination of these. There are three ways that Packstack can be run.

  • packstack
  • packstack [options]
  • packstack --gen-answer-file=<file>
  • packstack --answer-file=<file>

The third option allows the user to generate a default answer file, edit the default options, and finally run Packstack a second time using this answer file. This is the easiest way to run Packstack and the one that will be documented here. Optionally, it is possible to set additional command-line options (such as a default password), and those options will be set in the answer file.

When <file> is created, it will contain the OPTIONS below, which can then be edited by the user.

OPTIONS

Global Options

CONFIG_SSH_KEY

Path to a public key to install on servers. If a usable key has not been installed on the remote servers, the user is prompted for a password and this key is installed so the password will not be required again.

CONFIG_DEFAULT_PASSWORD

Default password to be used everywhere (overridden by passwords set for individual services or users).

CONFIG_SERVICE_WORKERS

The amount of service workers/threads to use for each service. Useful to tweak when you have memory constraints. Defaults to the amount of cores on the system.

CONFIG_MARIADB_INSTALL

Specify 'y' to install MariaDB. ['y', 'n']

CONFIG_GLANCE_INSTALL

Specify 'y' to install OpenStack Image Service (glance). ['y', 'n']

CONFIG_CINDER_INSTALL

Specify 'y' to install OpenStack Block Storage (cinder). ['y', 'n']

CONFIG_MANILA_INSTALL

Specify 'y' to install OpenStack Shared File System (manila). ['y', 'n']

CONFIG_NOVA_INSTALL

Specify 'y' to install OpenStack Compute (nova). ['y', 'n']

CONFIG_NEUTRON_INSTALL

Specify 'y' to install OpenStack Networking (neutron) ['y']

CONFIG_HORIZON_INSTALL

Specify 'y' to install OpenStack Dashboard (horizon). ['y', 'n']

CONFIG_SWIFT_INSTALL

Specify 'y' to install OpenStack Object Storage (swift). ['y', 'n']

CONFIG_CEILOMETER_INSTALL

Specify 'y' to install OpenStack Metering (ceilometer). Note this will also automatically install gnocchi service and configures it as the metrics backend. ['y', 'n']

CONFIG_AODH_INSTALL

Specify 'y' to install OpenStack Telemetry Alarming (Aodh). Note Aodh requires Ceilometer to be installed as well. ['y', 'n']

CONFIG_PANKO_INSTALL

Specify 'y' to install OpenStack Events Service (panko). ['y', 'n']

CONFIG_HEAT_INSTALL

Specify 'y' to install OpenStack Orchestration (heat). ['y', 'n']

CONFIG_MAGNUM_INSTALL

Specify 'y' to install OpenStack Container Infrastructure Management Service (magnum). ['y', 'n']

CONFIG_SAHARA_INSTALL

Specify 'y' to install OpenStack Data Processing (sahara). In case of sahara installation packstack also installs heat.['y', 'n']

CONFIG_TROVE_INSTALL

Specify 'y' to install OpenStack Database (trove) ['y', 'n']

CONFIG_IRONIC_INSTALL

Specify 'y' to install OpenStack Bare Metal Provisioning (ironic). ['y', 'n']

CONFIG_CLIENT_INSTALL

Specify 'y' to install the OpenStack Client packages (command-line tools). An admin "rc" file will also be installed. ['y', 'n']

CONFIG_NTP_SERVERS

Comma-separated list of NTP servers. Leave plain if Packstack should not install ntpd on instances.

EXCLUDE_SERVERS

Comma-separated list of servers to be excluded from the installation. This is helpful if you are running Packstack a second time with the same answer file and do not want Packstack to overwrite these server's configurations. Leave empty if you do not need to exclude any servers.

CONFIG_DEBUG_MODE

Specify 'y' if you want to run OpenStack services in debug mode; otherwise, specify 'n'. ['y', 'n']

CONFIG_CONTROLLER_HOST

Server on which to install OpenStack services specific to the controller role (for example, API servers or dashboard).

CONFIG_COMPUTE_HOSTS

List the servers on which to install the Compute service.

CONFIG_NETWORK_HOSTS

List of servers on which to install the network service such as Compute networking (nova network) or OpenStack Networking (neutron).

CONFIG_VMWARE_BACKEND

Specify 'y' if you want to use VMware vCenter as hypervisor and storage; otherwise, specify 'n'. ['y', 'n']

CONFIG_UNSUPPORTED

Specify 'y' if you want to use unsupported parameters. This should be used only if you know what you are doing. Issues caused by using unsupported options will not be fixed before the next major release. ['y', 'n']

CONFIG_USE_SUBNETS

Specify 'y' if you want to use subnet addresses (in CIDR format) instead of interface names in following options: CONFIG_NEUTRON_OVS_BRIDGE_IFACES, CONFIG_NEUTRON_LB_INTERFACE_MAPPINGS, CONFIG_NEUTRON_OVS_TUNNEL_IF. This is useful for cases when interface names are not same on all installation hosts.

SSL setup

Packstack supports ability to be get CA certificate and use it to sign all certificates used in OpenStack deployment. Standard workflow for this would be creating Subordinate CA. If Root CA is given to Packstack it is not safe to use it for anything else. If no CA is provided and CONFIG_SSL_CACERT_SELFSIGN is set to 'y' Packstack will use Selfsigned CA.

CONFIG_SSL_CERT_DIR

Enter the path to use to store generated SSL certificates in.

CONFIG_SSL_CACERT_FILE

Specify filepath for CA cert file. If CONFIG_SSL_CACERT_SELFSIGN is set to 'n' it has to be preexisting file.

CONFIG_SSL_CACERT_KEY_FILE

Specify filepath for CA cert key file. If CONFIG_SSL_CACERT_SELFSIGN is set to 'n' it has to be preexisting file.

CONFIG_SSL_CACERT_SELFSIGN

Specify 'y' if you want Packstack to pregenerate the CA Certificate.

SSL certificates options

CONFIG_SSL_CERT_SUBJECT_C

Enter the ssl certificates subject country.

CONFIG_SSL_CERT_SUBJECT_ST

Enter the ssl certificates subject state.

CONFIG_SSL_CERT_SUBJECT_L

Enter the ssl certificates subject location.

CONFIG_SSL_CERT_SUBJECT_O

Enter the ssl certificates subject organization.

CONFIG_SSL_CERT_SUBJECT_OU

Enter the ssl certificates subject organizational unit.

CONFIG_SSL_CERT_SUBJECT_CN

Enter the ssl certificates subject common name.

vCenter Config Parameters

CONFIG_VCENTER_HOST

IP address of the VMware vCenter server.

CONFIG_VCENTER_USER

User name for VMware vCenter server authentication.

CONFIG_VCENTER_PASSWORD

Password for VMware vCenter server authentication.

CONFIG_VCENTER_CLUSTER_NAMES

Comma separated list of names of the VMware vCenter clusters. Note: if multiple clusters are specified each one is mapped to one compute, otherwise all computes are mapped to same cluster.

Global unsupported options

CONFIG_STORAGE_HOST

(Unsupported!) Server on which to install OpenStack services specific to storage servers such as Image or Block Storage services.

CONFIG_SAHARA_HOST

(Unsupported!) Server on which to install OpenStack services specific to OpenStack Data Processing (sahara).

Server Prepare Configs

CONFIG_REPO

Comma-separated list of URLs for any additional yum repositories, to use for installation.

CONFIG_ENABLE_RDO_TESTING

Specify 'y' to enable the RDO testing repository. ['y', 'n']

RHEL config

CONFIG_RH_USER

To subscribe each server with Red Hat Subscription Manager, include this with CONFIG_RH_PW.

CONFIG_SATELLITE_URL

To subscribe each server to receive updates from a Satellite server, provide the URL of the Satellite server. You must also provide a user name (CONFIG_SATELLITE_USERNAME) and password (CONFIG_SATELLITE_PASSWORD) or an access key (CONFIG_SATELLITE_AKEY) for authentication.

CONFIG_RH_SAT6_SERVER

Specify a Satellite 6 Server to register to. If not specified, Packstack will register the system to the Red Hat server. When this option is specified, you also need to set the Satellite 6 organization (CONFIG_RH_SAT6_ORG) and an activation key (CONFIG_RH_SAT6_KEY).

RH subscription manager config

CONFIG_RH_PW

To subscribe each server with Red Hat Subscription Manager, include this with CONFIG_RH_USER.

CONFIG_RH_OPTIONAL

Specify 'y' to enable RHEL optional repositories. ['y', 'n']

CONFIG_RH_PROXY

HTTP proxy to use with Red Hat Subscription Manager.

CONFIG_RH_SAT6_ORG

Specify a Satellite 6 Server organization to use when registering the system.

CONFIG_RH_SAT6_KEY

Specify a Satellite 6 Server activation key to use when registering the system.

RH subscription manager proxy config

CONFIG_RH_PROXY_PORT

Port to use for Red Hat Subscription Manager's HTTP proxy.

CONFIG_RH_PROXY_USER

User name to use for Red Hat Subscription Manager's HTTP proxy.

CONFIG_RH_PROXY_PW

Password to use for Red Hat Subscription Manager's HTTP proxy.

RHN Satellite config

CONFIG_SATELLITE_USER

User name to authenticate with the RHN Satellite server; if you intend to use an access key for Satellite authentication, leave this blank.

CONFIG_SATELLITE_PW

Password to authenticate with the RHN Satellite server; if you intend to use an access key for Satellite authentication, leave this blank.

CONFIG_SATELLITE_AKEY

Access key for the Satellite server; if you intend to use a user name and password for Satellite authentication, leave this blank.

CONFIG_SATELLITE_CACERT

Certificate path or URL of the certificate authority to verify that the connection with the Satellite server is secure. If you are not using Satellite in your deployment, leave this blank.

CONFIG_SATELLITE_PROFILE

Profile name that should be used as an identifier for the system in RHN Satellite (if required).

CONFIG_SATELLITE_FLAGS

Comma-separated list of flags passed to the rhnreg_ks command. Valid flags are: novirtinfo, norhnsd, nopackages ['novirtinfo', 'norhnsd', 'nopackages']

CONFIG_SATELLITE_PROXY

HTTP proxy to use when connecting to the RHN Satellite server (if required).

RHN Satellite proxy config

CONFIG_SATELLITE_PROXY_USER

User name to authenticate with the Satellite-server HTTP proxy.

CONFIG_SATELLITE_PROXY_PW

User password to authenticate with the Satellite-server HTTP proxy.

AMQP Config parameters

CONFIG_AMQP_BACKEND

Service to be used as the AMQP broker. Allowed values are: rabbitmq ['rabbitmq']

CONFIG_AMQP_HOST

IP address of the server on which to install the AMQP service.

CONFIG_AMQP_ENABLE_SSL

Specify 'y' to enable SSL for the AMQP service. ['y', 'n']

CONFIG_AMQP_ENABLE_AUTH

Specify 'y' to enable authentication for the AMQP service. ['y', 'n']

AMQP Config SSL parameters

CONFIG_AMQP_NSS_CERTDB_PW

Password for the NSS certificate database of the AMQP service.

AMQP Config Authentication parameters

CONFIG_AMQP_AUTH_USER

User for AMQP authentication.

CONFIG_AMQP_AUTH_PASSWORD

Password for AMQP authentication.

MariaDB Config parameters

CONFIG_MARIADB_HOST

IP address of the server on which to install MariaDB. If a MariaDB installation was not specified in CONFIG_MARIADB_INSTALL, specify the IP address of an existing database server (a MariaDB cluster can also be specified).

CONFIG_MARIADB_USER

User name for the MariaDB administrative user.

CONFIG_MARIADB_PW

Password for the MariaDB administrative user.

Keystone Config parameters

CONFIG_KEYSTONE_DB_PW

Password to use for the Identity service (keystone) to access the database.

CONFIG_KEYSTONE_DB_PURGE_ENABLE

Enter y if cron job for removing soft deleted DB rows should be created.

CONFIG_KEYSTONE_REGION

Default region name to use when creating tenants in the Identity service.

CONFIG_KEYSTONE_ADMIN_TOKEN

Token to use for the Identity service API.

CONFIG_KEYSTONE_ADMIN_USERNAME

User name for the Identity service 'admin' user. Defaults to 'admin'.

CONFIG_KEYSTONE_ADMIN_PW

Password to use for the Identity service 'admin' user.

CONFIG_KEYSTONE_ADMIN_EMAIL

Email address for the Identity service 'admin' user. Defaults to 'root@localhost'.

CONFIG_KEYSTONE_DEMO_PW

Password to use for the Identity service 'demo' user.

CONFIG_KEYSTONE_API_VERSION

Identity service API version string. ['v2.0', 'v3']

CONFIG_KEYSTONE_TOKEN_FORMAT

Identity service token format (UUID, PKI or FERNET). The recommended format for new deployments is FERNET. ['UUID', 'PKI', 'FERNET']

CONFIG_KEYSTONE_IDENTITY_BACKEND

Type of Identity service backend (sql or ldap). ['sql', 'ldap']

Keystone LDAP Identity Backend Config parameters

CONFIG_KEYSTONE_LDAP_URL

URL for the Identity service LDAP backend.

CONFIG_KEYSTONE_LDAP_USER_DN

User DN for the Identity service LDAP backend. Used to bind to the LDAP server if the LDAP server does not allow anonymous authentication.

CONFIG_KEYSTONE_LDAP_USER_PASSWORD

User DN password for the Identity service LDAP backend.

CONFIG_KEYSTONE_LDAP_SUFFIX

Base suffix for the Identity service LDAP backend.

CONFIG_KEYSTONE_LDAP_QUERY_SCOPE

Query scope for the Identity service LDAP backend. Use 'one' for onelevel/singleLevel or 'sub' for subtree/wholeSubtree ('base' is not actually used by the Identity service and is therefore deprecated). ['base', 'one', 'sub']

CONFIG_KEYSTONE_LDAP_PAGE_SIZE

Query page size for the Identity service LDAP backend.

CONFIG_KEYSTONE_LDAP_USER_SUBTREE

User subtree for the Identity service LDAP backend.

CONFIG_KEYSTONE_LDAP_USER_FILTER

User query filter for the Identity service LDAP backend.

CONFIG_KEYSTONE_LDAP_USER_OBJECTCLASS

User object class for the Identity service LDAP backend.

CONFIG_KEYSTONE_LDAP_USER_ID_ATTRIBUTE

User ID attribute for the Identity service LDAP backend.

CONFIG_KEYSTONE_LDAP_USER_NAME_ATTRIBUTE

User name attribute for the Identity service LDAP backend.

CONFIG_KEYSTONE_LDAP_USER_MAIL_ATTRIBUTE

User email address attribute for the Identity service LDAP backend.

CONFIG_KEYSTONE_LDAP_USER_ENABLED_ATTRIBUTE

User-enabled attribute for the Identity service LDAP backend.

CONFIG_KEYSTONE_LDAP_USER_ENABLED_MASK

Bit mask integer applied to user-enabled attribute for the Identity service LDAP backend. Indicate the bit that the enabled value is stored in if the LDAP server represents "enabled" as a bit on an integer rather than a boolean. A value of "0" indicates the mask is not used (default). If this is not set to "0", the typical value is "2", typically used when "CONFIG_KEYSTONE_LDAP_USER_ENABLED_ATTRIBUTE = userAccountControl".

CONFIG_KEYSTONE_LDAP_USER_ENABLED_DEFAULT

Value of enabled attribute which indicates user is enabled for the Identity service LDAP backend. This should match an appropriate integer value if the LDAP server uses non-boolean (bitmask) values to indicate whether a user is enabled or disabled. If this is not set as 'y', the typical value is "512". This is typically used when "CONFIG_KEYSTONE_LDAP_USER_ENABLED_ATTRIBUTE = userAccountControl".

CONFIG_KEYSTONE_LDAP_USER_ENABLED_INVERT

Specify 'y' if users are disabled (not enabled) in the Identity service LDAP backend (inverts boolean-enalbed values). Some LDAP servers use a boolean lock attribute where "y" means an account is disabled. Setting this to 'y' allows these lock attributes to be used. This setting will have no effect if "CONFIG_KEYSTONE_LDAP_USER_ENABLED_MASK" is in use. ['n', 'y']

CONFIG_KEYSTONE_LDAP_USER_ATTRIBUTE_IGNORE

Comma-separated list of attributes stripped from LDAP user entry upon update.

CONFIG_KEYSTONE_LDAP_USER_DEFAULT_PROJECT_ID_ATTRIBUTE

Identity service LDAP attribute mapped to default_project_id for users.

CONFIG_KEYSTONE_LDAP_USER_ALLOW_CREATE

Specify 'y' if you want to be able to create Identity service users through the Identity service interface; specify 'n' if you will create directly in the LDAP backend. ['n', 'y']

CONFIG_KEYSTONE_LDAP_USER_ALLOW_UPDATE

Specify 'y' if you want to be able to update Identity service users through the Identity service interface; specify 'n' if you will update directly in the LDAP backend. ['n', 'y']

CONFIG_KEYSTONE_LDAP_USER_ALLOW_DELETE

Specify 'y' if you want to be able to delete Identity service users through the Identity service interface; specify 'n' if you will delete directly in the LDAP backend. ['n', 'y']

CONFIG_KEYSTONE_LDAP_USER_PASS_ATTRIBUTE

Identity service LDAP attribute mapped to password.

CONFIG_KEYSTONE_LDAP_USER_ENABLED_EMULATION_DN

DN of the group entry to hold enabled LDAP users when using enabled emulation.

CONFIG_KEYSTONE_LDAP_USER_ADDITIONAL_ATTRIBUTE_MAPPING

List of additional LDAP attributes for mapping additional attribute mappings for users. The attribute-mapping format is <ldap_attr>:<user_attr>, where ldap_attr is the attribute in the LDAP entry and user_attr is the Identity API attribute.

CONFIG_KEYSTONE_LDAP_GROUP_SUBTREE

Group subtree for the Identity service LDAP backend.

CONFIG_KEYSTONE_LDAP_GROUP_FILTER

Group query filter for the Identity service LDAP backend.

CONFIG_KEYSTONE_LDAP_GROUP_OBJECTCLASS

Group object class for the Identity service LDAP backend.

CONFIG_KEYSTONE_LDAP_GROUP_ID_ATTRIBUTE

Group ID attribute for the Identity service LDAP backend.

CONFIG_KEYSTONE_LDAP_GROUP_NAME_ATTRIBUTE

Group name attribute for the Identity service LDAP backend.

CONFIG_KEYSTONE_LDAP_GROUP_MEMBER_ATTRIBUTE

Group member attribute for the Identity service LDAP backend.

CONFIG_KEYSTONE_LDAP_GROUP_DESC_ATTRIBUTE

Group description attribute for the Identity service LDAP backend.

CONFIG_KEYSTONE_LDAP_GROUP_ATTRIBUTE_IGNORE

Comma-separated list of attributes stripped from LDAP group entry upon update.

CONFIG_KEYSTONE_LDAP_GROUP_ALLOW_CREATE

Specify 'y' if you want to be able to create Identity service groups through the Identity service interface; specify 'n' if you will create directly in the LDAP backend. ['n', 'y']

CONFIG_KEYSTONE_LDAP_GROUP_ALLOW_UPDATE

Specify 'y' if you want to be able to update Identity service groups through the Identity service interface; specify 'n' if you will update directly in the LDAP backend. ['n', 'y']

CONFIG_KEYSTONE_LDAP_GROUP_ALLOW_DELETE

Specify 'y' if you want to be able to delete Identity service groups through the Identity service interface; specify 'n' if you will delete directly in the LDAP backend. ['n', 'y']

CONFIG_KEYSTONE_LDAP_GROUP_ADDITIONAL_ATTRIBUTE_MAPPING

List of additional LDAP attributes used for mapping additional attribute mappings for groups. The attribute=mapping format is <ldap_attr>:<group_attr>, where ldap_attr is the attribute in the LDAP entry and group_attr is the Identity API attribute.

CONFIG_KEYSTONE_LDAP_USE_TLS

Specify 'y' if the Identity service LDAP backend should use TLS. ['n', 'y']

CONFIG_KEYSTONE_LDAP_TLS_CACERTDIR

CA certificate directory for Identity service LDAP backend (if TLS is used).

CONFIG_KEYSTONE_LDAP_TLS_CACERTFILE

CA certificate file for Identity service LDAP backend (if TLS is used).

CONFIG_KEYSTONE_LDAP_TLS_REQ_CERT

Certificate-checking strictness level for Identity service LDAP backend; valid options are: never, allow, demand. ['never', 'allow', 'demand']

Glance Config parameters

CONFIG_GLANCE_DB_PW

Password to use for the Image service (glance) to access the database.

CONFIG_GLANCE_KS_PW

Password to use for the Image service to authenticate with the Identity service.

CONFIG_GLANCE_BACKEND

Storage backend for the Image service (controls how the Image service stores disk images). Valid options are: file or swift (Object Storage). The Object Storage service must be enabled to use it as a working backend; otherwise, Packstack falls back to 'file'. ['file', 'swift']

Cinder Config parameters

CONFIG_CINDER_DB_PW

Password to use for the Block Storage service (cinder) to access the database.

CONFIG_CINDER_DB_PURGE_ENABLE

Enter y if cron job for removing soft deleted DB rows should be created.

CONFIG_CINDER_KS_PW

Password to use for the Block Storage service to authenticate with the Identity service.

CONFIG_CINDER_BACKEND

Storage backend to use for the Block Storage service; valid options are: lvm, gluster, nfs, vmdk, netapp, solidfire. ['lvm', 'gluster', 'nfs', 'vmdk', 'netapp', 'solidfire']

Cinder volume create Config parameters

CONFIG_CINDER_VOLUMES_CREATE

Specify 'y' to create the Block Storage volumes group. That is, Packstack creates a raw disk image in /var/lib/cinder, and mounts it using a loopback device. This should only be used for testing on a proof-of-concept installation of the Block Storage service (a file-backed volume group is not suitable for production usage). ['y', 'n']

Cinder volume size Config parameters

CONFIG_CINDER_VOLUMES_SIZE

Size of Block Storage volumes group. Actual volume size will be extended with 3% more space for VG metadata. Remember that the size of the volume group will restrict the amount of disk space that you can expose to Compute instances, and that the specified amount must be available on the device used for /var/lib/cinder.

Cinder lvm Config parameters

CONFIG_CINDER_VOLUME_NAME

Specify a custom name for the lvm cinder volume group

Cinder gluster Config parameters

CONFIG_CINDER_GLUSTER_MOUNTS

A single or comma-separated list of Red Hat Storage (gluster) volume shares to mount. Example: 'ip-address:/vol-name', 'domain:/vol-name'

Cinder NFS Config parameters

CONFIG_CINDER_NFS_MOUNTS

A single or comma-separated list of NFS exports to mount. Example: 'ip-address:/export-name'

Cinder NetApp main configuration

CONFIG_CINDER_NETAPP_LOGIN

Administrative user account name used to access the NetApp storage system or proxy server.

CONFIG_CINDER_NETAPP_PASSWORD

Password for the NetApp administrative user account specified in the CONFIG_CINDER_NETAPP_LOGIN parameter.

CONFIG_CINDER_NETAPP_HOSTNAME

Hostname (or IP address) for the NetApp storage system or proxy server.

CONFIG_CINDER_NETAPP_SERVER_PORT

The TCP port to use for communication with the storage system or proxy. If not specified, Data ONTAP drivers will use 80 for HTTP and 443 for HTTPS; E-Series will use 8080 for HTTP and 8443 for HTTPS. Defaults to 80.

CONFIG_CINDER_NETAPP_STORAGE_FAMILY

Storage family type used on the NetApp storage system; valid options are ontap_7mode for using Data ONTAP operating in 7-Mode, ontap_cluster for using clustered Data ONTAP, or E-Series for NetApp E-Series. Defaults to ontap_cluster. ['ontap_7mode', 'ontap_cluster', 'eseries']

CONFIG_CINDER_NETAPP_TRANSPORT_TYPE

The transport protocol used when communicating with the NetApp storage system or proxy server. Valid values are http or https. Defaults to 'http'. ['http', 'https']

CONFIG_CINDER_NETAPP_STORAGE_PROTOCOL

Storage protocol to be used on the data path with the NetApp storage system; valid options are iscsi, fc, nfs. Defaults to nfs. ['iscsi', 'fc', 'nfs']

Cinder NetApp ONTAP-iSCSI configuration

CONFIG_CINDER_NETAPP_SIZE_MULTIPLIER

Quantity to be multiplied by the requested volume size to ensure enough space is available on the virtual storage server (Vserver) to fulfill the volume creation request. Defaults to 1.0.

Cinder NetApp NFS configuration

CONFIG_CINDER_NETAPP_EXPIRY_THRES_MINUTES

Time period (in minutes) that is allowed to elapse after the image is last accessed, before it is deleted from the NFS image cache. When a cache-cleaning cycle begins, images in the cache that have not been accessed in the last M minutes, where M is the value of this parameter, are deleted from the cache to create free space on the NFS share. Defaults to 720.

CONFIG_CINDER_NETAPP_THRES_AVL_SIZE_PERC_START

If the percentage of available space for an NFS share has dropped below the value specified by this parameter, the NFS image cache is cleaned. Defaults to 20.

CONFIG_CINDER_NETAPP_THRES_AVL_SIZE_PERC_STOP

When the percentage of available space on an NFS share has reached the percentage specified by this parameter, the driver stops clearing files from the NFS image cache that have not been accessed in the last M minutes, where M is the value of the CONFIG_CINDER_NETAPP_EXPIRY_THRES_MINUTES parameter. Defaults to 60.

CONFIG_CINDER_NETAPP_NFS_SHARES

Single or comma-separated list of NetApp NFS shares for Block Storage to use. Format: ip-address:/export-name. Defaults to ''.

CONFIG_CINDER_NETAPP_NFS_SHARES_CONFIG

File with the list of available NFS shares. Defaults to '/etc/cinder/shares.conf'.

Cinder NetApp iSCSI & 7-mode configuration

CONFIG_CINDER_NETAPP_VOLUME_LIST

This parameter is only utilized when the storage protocol is configured to use iSCSI or FC. This parameter is used to restrict provisioning to the specified controller volumes. Specify the value of this parameter to be a comma separated list of NetApp controller volume names to be used for provisioning. Defaults to ''.

CONFIG_CINDER_NETAPP_VFILER

The vFiler unit on which provisioning of block storage volumes will be done. This parameter is only used by the driver when connecting to an instance with a storage family of Data ONTAP operating in 7-Mode Only use this parameter when utilizing the MultiStore feature on the NetApp storage system. Defaults to ''.

Cinder NetApp 7-mode FC configuration

CONFIG_CINDER_NETAPP_PARTNER_BACKEND_NAME

The name of the config.conf stanza for a Data ONTAP (7-mode) HA partner. This option is only used by the driver when connecting to an instance with a storage family of Data ONTAP operating in 7-Mode, and it is required if the storage protocol selected is FC. Defaults to ''.

Cinder NetApp Vserver configuration

CONFIG_CINDER_NETAPP_VSERVER

This option specifies the virtual storage server (Vserver) name on the storage cluster on which provisioning of block storage volumes should occur. Defaults to ''.

Cinder NetApp E-Series configuration

CONFIG_CINDER_NETAPP_CONTROLLER_IPS

Restricts provisioning to the specified controllers. Value must be a comma-separated list of controller hostnames or IP addresses to be used for provisioning. This option is only utilized when the storage family is configured to use E-Series. Defaults to ''.

CONFIG_CINDER_NETAPP_SA_PASSWORD

Password for the NetApp E-Series storage array. Defaults to ''.

CONFIG_CINDER_NETAPP_ESERIES_HOST_TYPE

This option is used to define how the controllers in the E-Series storage array will work with the particular operating system on the hosts that are connected to it. Defaults to 'linux_dm_mp'

CONFIG_CINDER_NETAPP_WEBSERVICE_PATH

Path to the NetApp E-Series proxy application on a proxy server. The value is combined with the value of the CONFIG_CINDER_NETAPP_TRANSPORT_TYPE, CONFIG_CINDER_NETAPP_HOSTNAME, and CONFIG_CINDER_NETAPP_HOSTNAME options to create the URL used by the driver to connect to the proxy application. Defaults to '/devmgr/v2'.

CONFIG_CINDER_NETAPP_STORAGE_POOLS

Restricts provisioning to the specified storage pools. Only dynamic disk pools are currently supported. The value must be a comma-separated list of disk pool names to be used for provisioning. Defaults to ''.

Cinder SolidFire configuration

CONFIG_CINDER_SOLIDFIRE_LOGIN

Cluster admin account name used to access the SolidFire storage system.

CONFIG_CINDER_SOLIDFIRE_PASSWORD

Password for the SolidFire cluster admin user account specified in the CONFIG_CINDER_SOLIDFIRE_LOGIN parameter.

CONFIG_CINDER_SOLIDFIRE_HOSTNAME

Hostname (or IP address) for the SolidFire storage system's MVIP.

Manila Config parameters

CONFIG_MANILA_DB_PW

Password to use for the OpenStack File Share service (manila) to access the database.

CONFIG_MANILA_KS_PW

Password to use for the OpenStack File Share service (manila) to authenticate with the Identity service.

CONFIG_MANILA_BACKEND

Backend for the OpenStack File Share service (manila); valid options are: generic, netapp, glusternative, or glusternfs. ['generic', 'netapp', 'glusternative', 'glusternfs']

Manila NetApp configuration

CONFIG_MANILA_NETAPP_DRV_HANDLES_SHARE_SERVERS

Denotes whether the driver should handle the responsibility of managing share servers. This must be set to false if the driver is to operate without managing share servers. Defaults to 'false' ['true', 'false']

CONFIG_MANILA_NETAPP_TRANSPORT_TYPE

The transport protocol used when communicating with the storage system or proxy server. Valid values are 'http' and 'https'. Defaults to 'https'. ['https', 'http']

CONFIG_MANILA_NETAPP_LOGIN

Administrative user account name used to access the NetApp storage system. Defaults to ''.

CONFIG_MANILA_NETAPP_PASSWORD

Password for the NetApp administrative user account specified in the CONFIG_MANILA_NETAPP_LOGIN parameter. Defaults to ''.

CONFIG_MANILA_NETAPP_SERVER_HOSTNAME

Hostname (or IP address) for the NetApp storage system or proxy server. Defaults to ''.

CONFIG_MANILA_NETAPP_STORAGE_FAMILY

The storage family type used on the storage system; valid values are ontap_cluster for clustered Data ONTAP. Defaults to 'ontap_cluster'. ['ontap_cluster']

CONFIG_MANILA_NETAPP_SERVER_PORT

The TCP port to use for communication with the storage system or proxy server. If not specified, Data ONTAP drivers will use 80 for HTTP and 443 for HTTPS. Defaults to '443'.

CONFIG_MANILA_NETAPP_AGGREGATE_NAME_SEARCH_PATTERN

Pattern for searching available aggregates for NetApp provisioning. Defaults to '(.*)'.

Manila NetApp Multi-SVM configuration

CONFIG_MANILA_NETAPP_ROOT_VOLUME_AGGREGATE

Name of aggregate on which to create the NetApp root volume. This option only applies when the option CONFIG_MANILA_NETAPP_DRV_HANDLES_SHARE_SERVERS is set to True.

CONFIG_MANILA_NETAPP_ROOT_VOLUME_NAME

NetApp root volume name. Defaults to 'root'.

Manila NetApp Single-SVM configuration

CONFIG_MANILA_NETAPP_VSERVER

This option specifies the storage virtual machine (previously called a Vserver) name on the storage cluster on which provisioning of shared file systems should occur. This option only applies when the option driver_handles_share_servers is set to False. Defaults to ''.

Manila generic driver configuration

CONFIG_MANILA_GENERIC_DRV_HANDLES_SHARE_SERVERS

Denotes whether the driver should handle the responsibility of managing share servers. This must be set to false if the driver is to operate without managing share servers. Defaults to 'true'. ['true', 'false']

CONFIG_MANILA_GENERIC_VOLUME_NAME_TEMPLATE

Volume name template for Manila service. Defaults to 'manila-share-%s'.

CONFIG_MANILA_GENERIC_SHARE_MOUNT_PATH

Share mount path for Manila service. Defaults to '/shares'.

CONFIG_MANILA_SERVICE_IMAGE_LOCATION

Location of disk image for Manila service instance. Defaults to 'https://www.dropbox.com/s/vi5oeh10q1qkckh/ubuntu_1204_nfs_cifs.qcow2'.

CONFIG_MANILA_SERVICE_INSTANCE_USER

User in Manila service instance.

CONFIG_MANILA_SERVICE_INSTANCE_PASSWORD

Password to service instance user.

Manila Network configuration

CONFIG_MANILA_NETWORK_TYPE

Type of networking that the backend will use. A more detailed description of each option is available in the Manila docs. Defaults to 'neutron'. ['neutron', 'nova-network', 'standalone']

Manila Standalone network configuration

CONFIG_MANILA_NETWORK_STANDALONE_GATEWAY

Gateway IPv4 address that should be used. Required. Defaults to ''.

CONFIG_MANILA_NETWORK_STANDALONE_NETMASK

Network mask that will be used. Can be either decimal like '24' or binary like '255.255.255.0'. Required. Defaults to ''.

CONFIG_MANILA_NETWORK_STANDALONE_SEG_ID

Set it if network has segmentation (VLAN, VXLAN, etc). It will be assigned to share-network and share drivers will be able to use this for network interfaces within provisioned share servers. Optional. Example: 1001. Defaults to ''.

CONFIG_MANILA_NETWORK_STANDALONE_IP_RANGE

Can be IP address, range of IP addresses or list of addresses or ranges. Contains addresses from IP network that are allowed to be used. If empty, then will be assumed that all host addresses from network can be used. Optional. Examples: 10.0.0.10 or 10.0.0.10-10.0.0.20 or 10.0.0.10-10.0.0.20,10.0.0.30-10.0.0.40,10.0.0.50. Defaults to ''.

CONFIG_MANILA_NETWORK_STANDALONE_IP_VERSION

IP version of network. Optional. Defaults to '4'. ['4', '6']

Ironic Options

CONFIG_IRONIC_DB_PW

Password to use for OpenStack Bare Metal Provisioning (ironic) to access the database.

CONFIG_IRONIC_KS_PW

Password to use for OpenStack Bare Metal Provisioning to authenticate with the Identity service.

Nova Options

CONFIG_NOVA_DB_PW

Password to use for the Compute service (nova) to access the database.

CONFIG_NOVA_DB_PURGE_ENABLE

Enter y if cron job for removing soft deleted DB rows should be created.

CONFIG_NOVA_KS_PW

Password to use for the Compute service to authenticate with the Identity service.

CONFIG_NOVA_MANAGE_FLAVORS

Whether or not Packstack should manage a default initial set of Nova flavors. Defaults to 'y'.

CONFIG_NOVA_LIBVIRT_VIRT_TYPE

The hypervisor driver to use with Nova. Can be either 'qemu' or 'kvm'. Defaults to 'qemu' on virtual machines and 'kvm' on bare metal hardware. For nested KVM set it explicitly to 'kvm'.

CONFIG_NOVA_SCHED_CPU_ALLOC_RATIO

Overcommitment ratio for virtual to physical CPUs. Specify 1.0 to disable CPU overcommitment.

CONFIG_NOVA_SCHED_RAM_ALLOC_RATIO

Overcommitment ratio for virtual to physical RAM. Specify 1.0 to disable RAM overcommitment.

CONFIG_NOVA_COMPUTE_MIGRATE_PROTOCOL

Protocol used for instance migration. Valid options are: ssh and tcp. Note that the tcp protocol is not encrypted, so it is insecure. ['ssh', 'tcp']

CONFIG_NOVA_PCI_ALIAS

Enter the PCI passthrough array of hash in JSON style for controller eg. [{"vendor_id":"1234", "product_id":"5678", "name":"default"}, {...}]

CONFIG_NOVA_PCI_PASSTHROUGH_WHITELIST

Enter the PCI passthrough whitelist array of hash in JSON style for controller eg. [{"vendor_id":"1234", "product_id":"5678", "name':"default"}, {...}]

CONFIG_VNC_SSL_CERT

PEM encoded certificate to be used for ssl on the https server, leave blank if one should be generated, this certificate should not require a passphrase. If CONFIG_HORIZON_SSL is set to 'n' this parameter is ignored.

CONFIG_VNC_SSL_KEY

SSL keyfile corresponding to the certificate if one was entered. If CONFIG_HORIZON_SSL is set to 'n' this parameter is ignored.

Neutron config

CONFIG_NEUTRON_KS_PW

Password to use for OpenStack Networking (neutron) to authenticate with the Identity service.

CONFIG_NEUTRON_DB_PW

The password to use for OpenStack Networking to access the database.

CONFIG_NEUTRON_L3_EXT_BRIDGE

The name of the Open vSwitch bridge (or empty for linuxbridge) for the OpenStack Networking L3 agent to use for external traffic. Specify 'provider' if you intend to use a provider network to handle external traffic.

CONFIG_NEUTRON_METADATA_PW

Password for the OpenStack Networking metadata agent.

CONFIG_LBAAS_INSTALL

Specify 'y' to install OpenStack Networking's Load-Balancing-as-a-Service (LBaaS). ['y', 'n']

CONFIG_NEUTRON_METERING_AGENT_INSTALL

Specify 'y' to install OpenStack Networking's L3 Metering agent ['y', 'n']

CONFIG_NEUTRON_FWAAS

Specify 'y' to configure OpenStack Networking's Firewall-as-a-Service (FWaaS). ['y', 'n']

CONFIG_NEUTRON_VPNAAS

Specify 'y' to configure OpenStack Networking's VPN-as-a-Service (VPNaaS). ['y', 'n']

Neutron ML2 plugin config

CONFIG_NEUTRON_ML2_TYPE_DRIVERS

Comma-separated list of network-type driver entry points to be loaded from the neutron.ml2.type_drivers namespace. ['local', 'flat', 'vlan', 'gre', 'vxlan', 'geneve']

CONFIG_NEUTRON_ML2_TENANT_NETWORK_TYPES

Comma-separated, ordered list of network types to allocate as tenant networks. The 'local' value is only useful for single-box testing and provides no connectivity between hosts. ['local', 'vlan', 'gre', 'vxlan', 'geneve']

CONFIG_NEUTRON_ML2_MECHANISM_DRIVERS

Comma-separated ordered list of networking mechanism driver entry points to be loaded from the neutron.ml2.mechanism_drivers namespace. ['logger', 'test', 'linuxbridge', 'openvswitch', 'hyperv', 'ncs', 'arista', 'cisco_nexus', 'mlnx', 'l2population', 'sriovnicswitch', 'ovn']

CONFIG_NEUTRON_ML2_FLAT_NETWORKS

Comma-separated list of physical_network names with which flat networks can be created. Use * to allow flat networks with arbitrary physical_network names.

CONFIG_NEUTRON_ML2_VLAN_RANGES

Comma-separated list of <physical_network>:<vlan_min>:<vlan_max> or <physical_network> specifying physical_network names usable for VLAN provider and tenant networks, as well as ranges of VLAN tags on each available for allocation to tenant networks.

CONFIG_NEUTRON_ML2_TUNNEL_ID_RANGES

Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE tunnel IDs that are available for tenant-network allocation. A tuple must be an array with tun_max +1 - tun_min > 1000000.

CONFIG_NEUTRON_ML2_VXLAN_GROUP

Comma-separated list of addresses for VXLAN multicast group. If left empty, disables VXLAN from sending allocate broadcast traffic (disables multicast VXLAN mode). Should be a Multicast IP (v4 or v6) address.

CONFIG_NEUTRON_ML2_SUPPORTED_PCI_VENDOR_DEVS

Comma separated list of supported PCI vendor devices defined by vendor_id:product_id according to the PCI ID Repository.

CONFIG_NEUTRON_ML2_VNI_RANGES

Comma-separated list of <vni_min>:<vni_max> tuples enumerating ranges of VXLAN VNI IDs that are available for tenant network allocation. Minimum value is 0 and maximum value is 16777215.

CONFIG_NEUTRON_ML2_SRIOV_INTERFACE_MAPPINGS

Comma-separated list of interface mappings for the OpenStack Networking ML2 SRIOV agent. Each tuple in the list must be in the format <physical_network>:<net_interface>. Example: physnet1:eth1,physnet2:eth2,physnet3:eth3.

CONFIG_NEUTRON_L2_AGENT

Name of the L2 agent to be used with OpenStack Networking. ['linuxbridge', 'openvswitch', 'ovn']

Neutron LB agent config

CONFIG_NEUTRON_LB_INTERFACE_MAPPINGS

Comma-separated list of interface mappings for the OpenStack Networking linuxbridge plugin. Each tuple in the list must be in the format <physical_network>:<net_interface>. Example: physnet1:eth1,physnet2:eth2,physnet3:eth3.

Neutron OVS agent config

CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS

Comma-separated list of bridge mappings for the OpenStack Networking Open vSwitch plugin. Each tuple in the list must be in the format <physical_network>:<ovs_bridge>. Example: physnet1:br-eth1,physnet2:br-eth2,physnet3:br-eth3

CONFIG_NEUTRON_OVS_BRIDGE_IFACES

Comma-separated list of colon-separated Open vSwitch <bridge>:<interface> pairs. The interface will be added to the associated bridge. If you desire the bridge to be persistent a value must be added to this directive, also CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS must be set in order to create the proper port. This can be achieved from the command line by issuing the following command: packstack --allinone --os-neutron-ovs-bridge-mappings=ext-net:br-ex --os-neutron-ovs-bridge-interfaces=br-ex:eth0

CONFIG_NEUTRON_OVS_BRIDGES_COMPUTE

Comma-separated list of Open vSwitch bridges that must be created and connected to interfaces in compute nodes when flat or vlan type drivers are enabled. These bridges must exist in CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS and CONFIG_NEUTRON_OVS_BRIDGE_IFACES. Example: --os-neutron-ovs-bridges-compute=br-vlan --os-neutron-ovs-bridge-mappings="extnet:br-ex,physnet1:br-vlan" --os-neutron-ovs-bridge-interfaces="br-ex:eth1,br-vlan:eth2"

CONFIG_NEUTRON_OVS_EXTERNAL_PHYSNET

Name of physical network used for external network when enabling CONFIG_PROVISION_DEMO. Name must be one of the included in CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS. Example: --os-neutron-ovs-bridge-mappings="extnet:br-ex,physnet1:br-vlan" --os-neutron-ovs-bridge-interfaces="br-ex:eth1,br-vlan:eth2" --os-neutron-ovs-external-physnet="extnet"

Neutron OVS agent config for tunnels

CONFIG_NEUTRON_OVS_TUNNEL_IF

Interface for the Open vSwitch tunnel. Packstack overrides the IP address used for tunnels on this hypervisor to the IP found on the specified interface (for example, eth1).

CONFIG_NEUTRON_OVS_TUNNEL_SUBNETS

Comma-separated list of subnets (for example, 192.168.10.0/24,192.168.11.0/24) used for sending tunneling packets. This is used to configure IP filtering to accept tunneling packets from these subnets instead of specific IP addresses of peer nodes. This is useful when you add existing nodes to EXCLUDE_SERVERS because, in this case, packstack cannot modify the IP filtering of the existing nodes.

Neutron OVS agent config for VXLAN

CONFIG_NEUTRON_OVS_VXLAN_UDP_PORT

VXLAN UDP port.

Neutron OVN agent config

CONFIG_NEUTRON_OVN_BRIDGE_MAPPINGS

Comma-separated list of bridge mappings for the OpenStack Networking Open Virtual Network plugin. Each tuple in the list must be in the format <physical_network>:<ovs_bridge>. Example: physnet1:br-eth1,physnet2:br-eth2,physnet3:br-eth3

CONFIG_NEUTRON_OVN_BRIDGE_IFACES

Comma-separated list of colon-separated Open vSwitch <bridge>:<interface> pairs. The interface will be added to the associated bridge. If you desire the bridge to be persistent a value must be added to this directive, also CONFIG_NEUTRON_OVN_BRIDGE_MAPPINGS must be set in order to create the proper port. This can be achieved from the command line by issuing the following command: packstack --allinone --os-neutron-ovn-bridge-mappings=ext-net:br-ex --os-neutron-ovn-bridge-interfaces=br-ex:eth0

CONFIG_NEUTRON_OVN_BRIDGES_COMPUTE

Comma-separated list of Open vSwitch bridges that must be created and connected to interfaces in compute nodes when flat or vlan type drivers are enabled. These bridges must exist in CONFIG_NEUTRON_OVN_BRIDGE_MAPPINGS and CONFIG_NEUTRON_OVN_BRIDGE_IFACES. Example: --os-neutron-ovn-bridges-compute=br-vlan --os-neutron-ovn-bridge-mappings="extnet:br-ex,physnet1:br-vlan" --os-neutron-ovn-bridge-interfaces="br-ex:eth1,br-vlan:eth2"

CONFIG_NEUTRON_OVN_EXTERNAL_PHYSNET

Name of physical network used for external network when enabling CONFIG_PROVISION_DEMO. Name must be one of the included in CONFIG_NEUTRON_OVN_BRIDGE_MAPPINGS. Example: --os-neutron-ovn-bridge-mappings="extnet:br-ex,physnet1:br-vlan" --os-neutron-ovn-bridge-interfaces="br-ex:eth1,br-vlan:eth2" --os-neutron-ovn-external-physnet="extnet"

Neutron OVN agent config for tunnels

CONFIG_NEUTRON_OVN_TUNNEL_IF

Interface for the Open vSwitch tunnel. Packstack overrides the IP address used for tunnels on this hypervisor to the IP found on the specified interface (for example, eth1).

CONFIG_NEUTRON_OVN_TUNNEL_SUBNETS

Comma-separated list of subnets (for example, 192.168.10.0/24,192.168.11.0/24) used for sending tunneling packets. This is used to configure IP filtering to accept tunneling packets from these subnets instead of specific IP addresses of peer nodes. This is useful when you add existing nodes to EXCLUDE_SERVERS because, in this case, packstack cannot modify the IP filtering of the existing nodes.

NOVACLIENT Config parameters

OpenStack Horizon Config parameters

CONFIG_HORIZON_SSL

Specify 'y' to set up Horizon communication over https. ['y', 'n']

CONFIG_HORIZON_SECRET_KEY

Secret key to use for Horizon Secret Encryption Key.

SSL Config parameters

CONFIG_HORIZON_SSL_CERT

PEM-encoded certificate to be used for SSL connections on the https server. To generate a certificate, leave blank.

CONFIG_HORIZON_SSL_KEY

SSL keyfile corresponding to the certificate if one was specified. The certificate should not require a passphrase.

CONFIG_HORIZON_SSL_CACHAIN

PEM-encoded CA certificates from which the certificate chain of the server certificate can be assembled.

OpenStack Swift Config parameters

CONFIG_SWIFT_KS_PW

Password to use for the Object Storage service to authenticate with the Identity service.

CONFIG_SWIFT_STORAGES

Comma-separated list of devices to use as storage device for Object Storage. Each entry must take the format /path/to/dev (for example, specifying /dev/vdb installs /dev/vdb as the Object Storage storage device; Packstack does not create the filesystem, you must do this first). If left empty, Packstack creates a loopback device for test setup.

CONFIG_SWIFT_STORAGE_ZONES

Number of Object Storage storage zones; this number MUST be no larger than the number of configured storage devices.

CONFIG_SWIFT_STORAGE_REPLICAS

Number of Object Storage storage replicas; this number MUST be no larger than the number of configured storage zones.

CONFIG_SWIFT_STORAGE_FSTYPE

File system type for storage nodes. ['xfs', 'ext4']

CONFIG_SWIFT_HASH

Custom seed number to use for swift_hash_path_suffix in /etc/swift/swift.conf. If you do not provide a value, a seed number is automatically generated.

CONFIG_SWIFT_STORAGE_SIZE

Size of the Object Storage loopback file storage device.

Heat Config parameters

CONFIG_HEAT_DB_PW

Password used by Orchestration service user to authenticate against the database.

CONFIG_HEAT_AUTH_ENC_KEY

Encryption key to use for authentication in the Orchestration database (16, 24, or 32 chars).

CONFIG_HEAT_KS_PW

Password to use for the Orchestration service to authenticate with the Identity service.

CONFIG_HEAT_CFN_INSTALL

Specify 'y' to install the Orchestration CloudFormation API. ['y', 'n']

CONFIG_HEAT_DOMAIN

Name of the Identity domain for Orchestration.

CONFIG_HEAT_DOMAIN_ADMIN

Name of the Identity domain administrative user for Orchestration.

CONFIG_HEAT_DOMAIN_PASSWORD

Password for the Identity domain administrative user for Orchestration.

Provisioning demo config

CONFIG_PROVISION_DEMO

Specify 'y' to provision for demo usage and testing. ['y', 'n']

CONFIG_PROVISION_TEMPEST

Specify 'y' to configure the OpenStack Integration Test Suite (tempest) for testing. The test suite requires OpenStack Networking to be installed. ['y', 'n']

Provisioning demo config

CONFIG_PROVISION_DEMO_FLOATRANGE

CIDR network address for the floating IP subnet.

CONFIG_PROVISION_DEMO_ALLOCATION_POOLS

Allocation pools in the floating IP subnet.

CONFIG_PROVISION_IMAGE_URL

A URL or local file location for an image to download and provision in Glance (defaults to a URL for a recent "cirros" image).

CONFIG_PROVISION_IMAGE_NAME

The name to be assigned to the demo image in Glance (default "cirros").

CONFIG_PROVISION_IMAGE_FORMAT

Format for the demo image (default "qcow2").

CONFIG_PROVISION_IMAGE_PROPERTIES

Properties of the demo image (none by default).

CONFIG_PROVISION_IMAGE_SSH_USER

User to use when connecting to instances booted from the demo image.

Provisioning tempest config

CONFIG_PROVISION_TEMPEST_USER

Name of the Integration Test Suite provisioning user. If you do not provide a user name, Tempest is configured in a standalone mode.

CONFIG_PROVISION_TEMPEST_USER_PW

Password to use for the Integration Test Suite provisioning user.

CONFIG_PROVISION_TEMPEST_FLOATRANGE

CIDR network address for the floating IP subnet.

CONFIG_PROVISION_TEMPEST_FLAVOR_NAME

Primary flavor name to use in Tempest.

CONFIG_PROVISION_TEMPEST_FLAVOR_DISK

Primary flavor's disk quota in Gb.

CONFIG_PROVISION_TEMPEST_FLAVOR_RAM

Primary flavor's ram in Mb.

CONFIG_PROVISION_TEMPEST_FLAVOR_VCPUS

Primary flavor's vcpus number.

CONFIG_PROVISION_TEMPEST_FLAVOR_ALT_NAME

Alternative flavor name to use in Tempest.

CONFIG_PROVISION_TEMPEST_FLAVOR_ALT_DISK

Alternative flavor's disk quota in Gb.

CONFIG_PROVISION_TEMPEST_FLAVOR_ALT_RAM

Alternative flavor's ram in Mb.

CONFIG_PROVISION_TEMPEST_FLAVOR_ALT_VCPUS

Alternative flavor's vcpus number.

CONFIG_RUN_TEMPEST

Specify 'y' to run Tempest smoke test as last step of installation.

CONFIG_RUN_TEMPEST_TESTS

Test suites to run, example: "smoke dashboard TelemetryAlarming". Optional, defaults to "smoke".

CONFIG_PROVISION_UEC_IMAGE_NAME

Name of the uec image created in Glance used in tempest tests (default "cirros-uec").

CONFIG_PROVISION_UEC_IMAGE_KERNEL_URL

URL of the kernel image copied to Glance image for uec image (defaults to a URL for a recent "cirros" uec image).

CONFIG_PROVISION_UEC_IMAGE_RAMDISK_URL

URL of the ramdisk image copied to Glance image for uec image (defaults to a URL for a recent "cirros" uec image).

CONFIG_PROVISION_UEC_IMAGE_DISK_URL

URL of the disk image copied to Glance image for uec image (defaults to a URL for a recent "cirros" uec image).

Provisioning all-in-one ovs bridge config

CONFIG_PROVISION_OVS_BRIDGE

Specify 'y' to configure the Open vSwitch external bridge for an all-in-one deployment (the L3 external bridge acts as the gateway for virtual machines). ['y', 'n']

Ceilometer Config parameters

CONFIG_CEILOMETER_SECRET

Secret key for signing Telemetry service (ceilometer) messages.

CONFIG_CEILOMETER_KS_PW

Password to use for Telemetry to authenticate with the Identity service.

CONFIG_CEILOMETER_COORDINATION_BACKEND

Backend driver for Telemetry's group membership coordination. ['redis', 'none']

CONFIG_CEILOMETER_SERVICE_NAME

Ceilometer service name. ['httpd', 'ceilometer']

CONFIG_ENABLE_CEILOMETER_MIDDLEWARE

Whether to enable ceilometer middleware in swift proxy. By default this should be false to avoid unnecessary load.

Redis Config parameters

CONFIG_REDIS_HOST

IP address of the server on which to install the Redis server.

CONFIG_REDIS_PORT

Port on which the Redis server listens.

Aodh Config parameters

CONFIG_AODH_KS_PW

Password to use for Telemetry Alarming to authenticate with the Identity service.

CONFIG_AODH_DB_PW

Password to use for Telemetry Alarming (AODH) to access the database.

Gnocchi Config parameters

CONFIG_GNOCCHI_DB_PW

Password to use for Gnocchi to access the database.

CONFIG_GNOCCHI_KS_PW

Password to use for Gnocchi to authenticate with the Identity service.

Panko Config parameters

CONFIG_PANKO_DB_PW

Password to use for Panko to access the database.

CONFIG_PANKO_KS_PW

Password to use for Panko to authenticate with the Identity service.

Sahara Config parameters

CONFIG_SAHARA_DB_PW

Password to use for OpenStack Data Processing (sahara) to access the database.

CONFIG_SAHARA_KS_PW

Password to use for OpenStack Data Processing to authenticate with the Identity service.

Trove config parameters

CONFIG_TROVE_DB_PW

Password to use for OpenStack Database-as-a-Service (trove) to access the database.

CONFIG_TROVE_KS_PW

Password to use for OpenStack Database-as-a-Service to authenticate with the Identity service.

CONFIG_TROVE_NOVA_USER

User name to use when OpenStack Database-as-a-Service connects to the Compute service.

CONFIG_TROVE_NOVA_TENANT

Tenant to use when OpenStack Database-as-a-Service connects to the Compute service.

CONFIG_TROVE_NOVA_PW

Password to use when OpenStack Database-as-a-Service connects to the Compute service.

Magnum Options

CONFIG_MAGNUM_DB_PW

Password to use for the Magnum to access the database.

CONFIG_MAGNUM_KS_PW

Password to use for the Magnum to authenticate with the Identity service.

Log files and Debug info

Log files and generated puppet manifests can be found in the /var/tmp/packstack directory under a directory named by the date in which Packstack was run and a random string (for example, /var/tmp/packstack/20131022-204316-Bf3Ek2). Inside the directory are the openstack-setup.log file and a manifest directory, which contains puppet manifests and a log file for each one.

If debugging information is needed while running packstack, the -d switch will make it write more detailed information about the installation.

Examples:

If we need an all-in-one debug session:

packstack -d --allinone

If we need a answer file to tailor it and then debug:

packstack --gen-answer-file=ans.txt packstack -d --answer-file=ans.txt

Glusterfs Native (FUSE) configuration info

CONFIG_MANILA_GLUSTERFS_SERVERS

List of GlusterFS servers that can be used to create shares. Each GlusterFS server should be of the form [remoteuser@]<volserver>, and they are assumed to belong to distinct Gluster clusters.

CONFIG_MANILA_GLUSTERFS_NATIVE_PATH_TO_PRIVATE_KEY

Path of Manila host's private SSH key file.

CONFIG_MANILA_GLUSTERFS_VOLUME_PATTERN

Regular expression template used to filter GlusterFS volumes for share creation. The regex template can optionally (ie. with support of the GlusterFS backend) contain the #{size} parameter which matches an integer (sequence of digits) in which case the value shall be intepreted as size of the volume in GB. Examples: "manila-share-volume-d+$", "manila-share-volume-#{size}G-d+$"; with matching volume names, respectively: "manila-share-volume-12", "manila-share-volume-3G-13". In latter example, the number that matches "#{size}", that is, 3, is an indication that the size of volume is 3G.

GlusterNFS configuration info

CONFIG_MANILA_GLUSTERFS_TARGET

Specifies the GlusterFS volume to be mounted on the Manila host. For e.g: [remoteuser@]<volserver>:/<volid>

CONFIG_MANILA_GLUSTERFS_MOUNT_POINT_BASE

Base directory containing mount points for Gluster volumes.

CONFIG_MANILA_GLUSTERFS_NFS_SERVER_TYPE

Type of NFS server that mediate access to the Gluster volumes (Gluster or Ganesha).

CONFIG_MANILA_GLUSTERFS_PATH_TO_PRIVATE_KEY

Path of Manila host's private SSH key file.

CONFIG_MANILA_GLUSTERFS_GANESHA_SERVER_IP

Remote Ganesha server node's IP address.

SOURCE