vmware-nsx/doc/source/housekeeper.rst
Adit Sarfaty d753ec6945 Remove neutron-lbaas support & dependencies
Commit Ia4f4b335295c0e6add79fe0db5dd31b4327fdb54 removed all the
neutron-lbaas code from the master (Train) branch

Change-Id: I9035f6238773aad0591436c856550b7a5e01e687
2019-05-19 11:16:45 +03:00

3.3 KiB

Plugin Housekeeper

During the Neutron plugin's operation, system may enter an inconsistent state due to synchronization issues between different components, e.g Neutron and NSX or NSX and vCenter. Some of these inconsistencies may impact the operation of various system elements.

The Housekeeping mechanism should: a) Detect such inconsistencies and warn about them. b) Resolve inconsistencies when possible.

Some of these inconsistencies can be resolved using the Admin utility, yet it requires manual operation by the administrator while the housekeeping mechanism should be automatic.

Configuration

Housekeeping mechanism uses two configuration parameters:

nsxv/v3.housekeeping_jobs: The housekeeper can be configured which tasks to execute and which should be skipped.

nsxv/v3.housekeeping_readonly: Housekeeper may attempt to fix a broken environment when this flag is set to False, or otherwise will just warn about inconsistencies.

Operation

The housekeeping mechanism is an extension to the Neutron plugin. Therefore it can be triggered by accessing the extension's URL with an administrator context.

A naive devstack example could be:

source devstack/openrc admin demo
export AUTH_TOKEN=`openstack token issue | awk '/ id /{print $4}'`

curl -X GET -s -H "X-Auth-Token: $AUTH_TOKEN" -H 'Content-Type: application/json' -d '{"housekeeper": {}}' http://<IP address>:9696/v2.0/housekeepers/all

curl -X PUT -s -H "X-Auth-Token: $AUTH_TOKEN" -H 'Content-Type: application/json' -d '{"housekeeper": {}}' http://<IP address>:9696/v2.0/housekeepers/all

Where <IP address> would be the Neutron controller's IP or the virtual IP of the load balancer which manages the Neutron controllers. It is important to use the virtual IP in case of a load balanced active-backup Neutron servers, as otherwise the housekeeping request may be handled by the wrong controller.

The GET curl call will run all jobs in readonly mode the PUT curl call will run all jobs in readwrite mode (for that the housekeeping_readonly should be set to False)

To operate the housekeeper periodically as it should, it should be scheduled via a timing mechanism such as Linux cron.

Plugin Jobs

NSX-V

error_dhcp_edge: scans for DHCP Edge appliances which are in ERROR state. When in non-readonly mode, the job will attempt recovery of the DHCP edges by removing stale elements from the Neutron DB and reconfigure the interfaces at the backend when required.

error_backup_edge: scans from backup Edge appliances which are in ERROR state. When in non-readonly mode, the job will reset the Edge appliance configuration.

NSX-v3

orphaned_logical_router: scans the NSX backend for logical routers which are missing from the neutron DB. Report it, and if in non-readonly mode delete them.

orphaned_logical_swithces: scans the NSX backend for logical switches which are missing from the neutron DB. Report it, and if in non-readonly mode delete them.

orphaned_dhcp_server: scans the NSX backend for DHCP servers which are missing a matching network in the neutron DB. Report it, and if in non-readonly mode delete them.

orphaned_firewall_section: scans the NSX backend for firewall sections which are missing a matching security group in the neutron DB. Report it, and if in non-readonly mode delete them.