openstack/devstack
Code Issues Proposed changes

Derive IP ranges from new ADDRS_SAFE_TO_USE vars

Browse Source 
The switch to using subnetpools caused quite a bit of confusion
because it didn't respect the value of FIXED_RANGE. This caused
conflicts in the gate with it's default IPv4 value of 10.0.0.0/8.

This patch does a few things to address the issue:
* It introduces the IPV4_ADDRS_SAFE_TO_USE and IPV6_ADDRS_SAFE_TO_USE
  values and adjusts all of the FIXED_RANGE and SUBNETPOOL_PREFIX values
  to dervive from them by default.
  * This addresses the concern that was raised about implying that
    SUBNETPOOL_PREFIX and FIXED_RANGE are equivalent when setting
    SUBNETPOOL_PREFIX=FIXED_RANGE by default. Now we have a new value
    for the operator specify a chunk of addresses that are safe to
    use for private networks without implementation implications.
  * Backwards compatibility is maintained by alloing users to override
    override all of these values.
* The default for IPV4_ADDRS_SAFE_TO_USE uses /22 instead of /24
  * Because we want to be able to use subnetpools for auto allocated
    topologies and we want to be able to have a large chunk of
    instances on each network, we needed a little more breathing room
    in the default v4 network size.
* SUBNET_POOL_SIZE_V4 default is changed from 24 to 26
  * In conjuction with this change and the one above, the default
    subnetpool will support up to 16 64-address allocations.
  * This should be enough to cover any regular gate scenarios.
  * If someone wants a bigger/smaller subnet, they can ask for that
    in the API request, change this value themselves, or use a different
    network entirely.
* FIXED_RANGE_V6 defaults to a max prefix of /64 from IPV6_ADDRS_SAFE_TO_USE
  * This avoids the private subnet in the non-subnetpool case from being
    larger than /64 to avoid issues identified in rfc 7421.
  * Users can still explicitly set this value to whatever they want.
    This 'max' behavior is only for the default.
  * This allows IPV6_ADDRS_SAFE_TO_USE to default to a /56, which leaves
    tons of room for v6 subnetpools.

Closes-Bug: #1629133
Change-Id: I7b32804d47bec743c0b13e434e6a7958728896ea
This commit is contained in:
Kevin Benton 2016-11-15 17:26:05 -08:00
parent 7976f31fb9
commit 4bfbc291ee
5 changed files with 43 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
doc/source/configuration.rst
View File

@ -63,7 +63,7 @@ exists it will be used instead to preserve backward-compatibility.
::
[[local|localrc]]
FIXED_RANGE=10.254.1.0/24
IPV4_ADDRS_SAFE_TO_USE=10.254.1.0/24
ADMIN_PASSWORD=speciale
LOGFILE=$DEST/logs/stack.sh.log
@ -161,8 +161,8 @@ values that most often need to be set.
- no logging
- pre-set the passwords to prevent interactive prompts
- move network ranges away from the local network (``FIXED_RANGE`` and
``FLOATING_RANGE``, commented out below)
- move network ranges away from the local network (``IPV4_ADDRS_SAFE_TO_USE``
and ``FLOATING_RANGE``, commented out below)
- set the host IP if detection is unreliable (``HOST_IP``, commented
out below)
@ -173,7 +173,7 @@ values that most often need to be set.
DATABASE_PASSWORD=$ADMIN_PASSWORD
RABBIT_PASSWORD=$ADMIN_PASSWORD
SERVICE_PASSWORD=$ADMIN_PASSWORD
#FIXED_RANGE=172.31.1.0/24
#IPV4_ADDRS_SAFE_TO_USE=172.31.1.0/24
#FLOATING_RANGE=192.168.20.0/25
#HOST_IP=10.3.4.5
@ -537,12 +537,12 @@ behavior:
IPV6_RA_MODE=slaac
IPV6_ADDRESS_MODE=slaac
FIXED_RANGE_V6=fd$IPV6_GLOBAL_ID::/64
IPV6_ADDRS_SAFE_TO_USE=fd$IPV6_GLOBAL_ID::/56
IPV6_PRIVATE_NETWORK_GATEWAY=fd$IPV6_GLOBAL_ID::1
*Note*: ``FIXED_RANGE_V6`` and ``IPV6_PRIVATE_NETWORK_GATEWAY`` can be
configured with any valid IPv6 prefix. The default values make use of
an auto-generated ``IPV6_GLOBAL_ID`` to comply with RFC4193.
*Note*: ``IPV6_ADDRS_SAFE_TO_USE`` and ``IPV6_PRIVATE_NETWORK_GATEWAY``
can be configured with any valid IPv6 prefix. The default values make
use of an auto-generated ``IPV6_GLOBAL_ID`` to comply with RFC4193.
Service Version
~~~~~~~~~~~~~~~

12
doc/source/guides/neutron.rst
View File

@ -79,7 +79,7 @@ serving as a hypervisor for guest instances.
## Neutron options
Q_USE_SECGROUP=True
FLOATING_RANGE="172.18.161.0/24"
FIXED_RANGE="10.0.0.0/24"
IPV4_ADDRS_SAFE_TO_USE="10.0.0.0/22"
Q_FLOATING_ALLOCATION_POOL=start=172.18.161.250,end=172.18.161.254
PUBLIC_NETWORK_GATEWAY="172.18.161.1"
PUBLIC_INTERFACE=eth0
@ -387,17 +387,17 @@ controller node.
## Neutron Networking options used to create Neutron Subnets
FIXED_RANGE="203.0.113.0/24"
IPV4_ADDRS_SAFE_TO_USE="203.0.113.0/24"
NETWORK_GATEWAY=203.0.113.1
PROVIDER_SUBNET_NAME="provider_net"
PROVIDER_NETWORK_TYPE="vlan"
SEGMENTATION_ID=2010
USE_SUBNETPOOL=False
In this configuration we are defining FIXED_RANGE to be a
In this configuration we are defining IPV4_ADDRS_SAFE_TO_USE to be a
publicly routed IPv4 subnet. In this specific instance we are using
the special TEST-NET-3 subnet defined in `RFC 5737 <http://tools.ietf.org/html/rfc5737>`_,
which is used for documentation. In your DevStack setup, FIXED_RANGE
which is used for documentation. In your DevStack setup, IPV4_ADDRS_SAFE_TO_USE
would be a public IP address range that you or your organization has
allocated to you, so that you could access your instances from the
public internet.
@ -524,7 +524,7 @@ setup, with small modifications for the interface mappings.
## Neutron options
Q_USE_SECGROUP=True
FLOATING_RANGE="172.18.161.0/24"
FIXED_RANGE="10.0.0.0/24"
IPV4_ADDRS_SAFE_TO_USE="10.0.0.0/24"
Q_FLOATING_ALLOCATION_POOL=start=172.18.161.250,end=172.18.161.254
PUBLIC_NETWORK_GATEWAY="172.18.161.1"
PUBLIC_INTERFACE=eth0
@ -573,7 +573,7 @@ you do not require them.
Q_AGENT=macvtap
PHYSICAL_NETWORK=default
FIXED_RANGE="203.0.113.0/24"
IPV4_ADDRS_SAFE_TO_USE="203.0.113.0/24"
NETWORK_GATEWAY=203.0.113.1
PROVIDER_SUBNET_NAME="provider_net"
PROVIDER_NETWORK_TYPE="vlan"

21
doc/source/networking.rst
View File

@ -15,7 +15,8 @@ If you don't specify any configuration you will get the following:
* neutron (including l3 with openvswitch)
* private project networks for each openstack project
* a floating ip range of 172.24.4.0/24 with the gateway of 172.24.4.1
* the demo project configured with fixed ips on 10.0.0.0/24
* the demo project configured with fixed ips on a subnet allocated from
the 10.0.0.0/22 range
* a ``br-ex`` interface controlled by neutron for all it's networking
(this is not connected to any physical interfaces).
* DNS resolution for guests based on the resolv.conf for you host
@ -95,3 +96,21 @@ the range of floating ips that will be handed out. As we are sharing
your existing network, you'll want to give it a slice that your local
dhcp server is not allocating. Otherwise you could easily have
conflicting ip addresses, and cause havoc with your local network.
Private Network Addressing
==========================
The private networks addresses are controlled by the ``IPV4_ADDRS_SAFE_TO_USE``
and the ``IPV6_ADDRS_SAFE_TO_USE`` variables. This allows users to specify one
single variable of safe internal IPs to use that will be referenced whether or
not subnetpools are in use.
For IPv4, ``FIXED_RANGE`` and ``SUBNETPOOL_PREFIX_V4`` will just default to
the value of ``IPV4_ADDRS_SAFE_TO_USE`` directly.
For IPv6, ``FIXED_RANGE`` will default to the first /64 of the value of
``IPV6_ADDRS_SAFE_TO_USE``. If ``IPV6_ADDRS_SAFE_TO_USE`` is /64 or smaller,
``FIXED_RANGE`` will just use the value of that directly.
``SUBNETPOOL_PREFIX_V6`` will just default to the value of
``IPV6_ADDRS_SAFE_TO_USE`` directly.

11
lib/neutron_plugins/services/l3
View File

@ -70,7 +70,10 @@ IPV6_RA_MODE=${IPV6_RA_MODE:-slaac}
IPV6_ADDRESS_MODE=${IPV6_ADDRESS_MODE:-slaac}
IPV6_PUBLIC_SUBNET_NAME=${IPV6_PUBLIC_SUBNET_NAME:-ipv6-public-subnet}
IPV6_PRIVATE_SUBNET_NAME=${IPV6_PRIVATE_SUBNET_NAME:-ipv6-private-subnet}
FIXED_RANGE_V6=${FIXED_RANGE_V6:-fd$IPV6_GLOBAL_ID::/64}
IPV6_ADDRS_SAFE_TO_USE=${IPV6_ADDRS_SAFE_TO_USE:-fd$IPV6_GLOBAL_ID::/56}
# if we got larger than a /64 safe to use, we only use the first /64 to
# avoid side effects outlined in rfc7421
FIXED_RANGE_V6=${FIXED_RANGE_V6:-$(echo $IPV6_ADDRS_SAFE_TO_USE | awk -F '/' '{ print ($2>63 ? $2 : 64) }')}
IPV6_PRIVATE_NETWORK_GATEWAY=${IPV6_PRIVATE_NETWORK_GATEWAY:-}
IPV6_PUBLIC_RANGE=${IPV6_PUBLIC_RANGE:-2001:db8::/64}
IPV6_PUBLIC_NETWORK_GATEWAY=${IPV6_PUBLIC_NETWORK_GATEWAY:-2001:db8::2}
@ -86,10 +89,10 @@ PUBLIC_SUBNET_NAME=${PUBLIC_SUBNET_NAME:-"public-subnet"}
USE_SUBNETPOOL=${USE_SUBNETPOOL:-True}
SUBNETPOOL_NAME=${SUBNETPOOL_NAME:-"shared-default-subnetpool"}
SUBNETPOOL_PREFIX_V4=${SUBNETPOOL_PREFIX_V4:-10.0.0.0/16}
SUBNETPOOL_PREFIX_V6=${SUBNETPOOL_PREFIX_V6:-2001:db8:8000::/48}
SUBNETPOOL_PREFIX_V4=${SUBNETPOOL_PREFIX_V4:-$IPV4_ADDRS_SAFE_TO_USE}
SUBNETPOOL_PREFIX_V6=${SUBNETPOOL_PREFIX_V6:-$IPV6_ADDRS_SAFE_TO_USE}
SUBNETPOOL_SIZE_V4=${SUBNETPOOL_SIZE_V4:-24}
SUBNETPOOL_SIZE_V4=${SUBNETPOOL_SIZE_V4:-26}
SUBNETPOOL_SIZE_V6=${SUBNETPOOL_SIZE_V6:-64}
default_v4_route_devs=$(ip -4 route | grep ^default | awk '{print $5}')

3
stackrc
View File

@ -765,7 +765,8 @@ ENABLE_DEBUG_LOG_LEVEL=$(trueorfalse True ENABLE_DEBUG_LOG_LEVEL)
# Note that setting ``FIXED_RANGE`` may be necessary when running DevStack
# in an OpenStack cloud that uses either of these address ranges internally.
FLOATING_RANGE=${FLOATING_RANGE:-172.24.4.0/24}
FIXED_RANGE=${FIXED_RANGE:-10.0.0.0/24}
IPV4_ADDRS_SAFE_TO_USE=${IPV4_ADDRS_SAFE_TO_USE:-10.0.0.0/22}
FIXED_RANGE=${FIXED_RANGE:-$IPV4_ADDRS_SAFE_TO_USE}
FIXED_NETWORK_SIZE=${FIXED_NETWORK_SIZE:-256}
HOST_IP_IFACE=${HOST_IP_IFACE:-}
HOST_IP=${HOST_IP:-}