openstack/freezer
Code Issues Proposed changes
ef5695c36f
freezer/README.rst
Fausto Marzi ef5695c36f Freezer initial commit
2014-07-22 22:46:31 +01:00

12 KiB
Raw Blame History

Freezer

Freezer is a Python tool that helps you to automate the data backup and restore process.

The following features are avaialble:

  • Backup your filesystem using snapshot to swift
  • Strong encryption supported: AES-256-CFB
  • Backup your file system tree directly (without volume snapshot)
  • Backup your journaled MongoDB directory tree using lvm snap to swift
  • Backup MySQL DB with lvm snapshot
  • Restore your data automatically from Swift to your file system
  • Low storage consumption as the backup are uploaded as a stream
  • Flexible Incremental backup policy
  • Data is archived in GNU Tar format
  • Data compression with gzip
  • Remove old backup automatically according the provided parameters

Requirements

  • OpenStack Swift Account (Auth V2 used)
  • python >= 2.6 (2.7 advised)
  • GNU Tar >= 1.26
  • gzip
  • OpenSSL
  • python-swiftclient >= 2.0.3
  • python-keystoneclient >= 0.8.0
  • pymongo >= 2.6.2 (if MongoDB backups will be executed)
  • At least 128 MB of memory reserved for freezer

Installation & Env Setup

Install required packages

Ubuntu / Debian

Swift client and Keystone client:

$ sudo apt-get install -y python-swiftclient python-keystoneclient

MongoDB backup:

$ sudo apt-get install -y python-pymongo

MySQL backup:

$ sudo apt-get install -y python-mysqldb

Freezer installation from Python package repo:

$ sudo pip install freezer

OR:

$ sudo easy\_install freezer

The basic Swift account configuration is needed to use freezer. Make sure python-swiftclient is installed.

Also the following ENV var are needed you can put them in ~/.bashrc:

export OS_REGION_NAME=region-a.geo-1
export OS_TENANT_ID=<account tenant>
export OS_PASSWORD=<account password>
export OS_AUTH_URL=https://region-a.geo-1.identity.hpcloudsvc.com:35357/v2.0
export OS_USERNAME=automationbackup
export OS_TENANT_NAME=automationbackup

$ source ~/.barshrc

Let's say you have a container called foobar-contaienr, by executing "swift list" you should see something like:

$ swift list
foobar-container-2
$

These are just use case example using Swift in the HP Cloud.

Is strongly advised to use execute a backup using LVM snapshot, so freezer will execute a backup on point-in-time data. This avoid risks of data inconsistencies and corruption.

Usage Example

Backup

The most simple backup execution is a direct file system backup:

$ sudo freezerc --file-to-backup /data/dir/to/backup
--container new-data-backup --backup-name my-backup-name

By default --mode fs is set. The command would generate a compressed tar gzip file of the directory /data/dir/to/backup. The generated file will be segmented in stream and uploaded in the swift container called new-data-backup, with backup name my-backup-name

Now check if your backup is executing correctly looking at /var/log/freezer.log

Execute a MongoDB backup using lvm snapshot:

We need to check before on which volume group and logical volume our mongo data is. These information can be obtained as per following:

$ mount
[...]

Once we know the volume where our mongo data is mounted on, we can get the volume group and logical volume info:

$ sudo vgdisplay
[...]
$ sudo lvdisplay
[...]

We assume our mongo volume is "/dev/mongo/mongolv" and the volume group is "mongo":

$ sudo freezerc --lvm-srcvol /dev/mongo/mongolv --lvm-dirmount /var/lib/snapshot-backup
--lvm-volgroup mongo --file-to-backup /var/lib/snapshot-backup/mongod_ops2
--container mongodb-backup-prod --exclude "*.lock" --mode mongo --backup-name mongod-ops2

Now freezerc create a lvm snapshot of the volume /dev/mongo/mongolv. If no options are provided, default snapshot name is freezer_backup_snap. The snap vol will be mounted automatically on /var/lib/snapshot-backup and the backup meta and segments will be upload in the container mongodb-backup-prod with the namemongod-ops2.

Execute a file system backup using lvm snapshot:

$ sudo freezerc --lvm-srcvol /dev/jenkins/jenkins-home --lvm-dirmount
/var/snapshot-backup --lvm-volgroup jenkins
--file-to-backup /var/snapshot-backup --container jenkins-backup-prod
--exclude "\*.lock" --mode fs --backup-name jenkins-ops2

MySQL backup require a basic configuration file. The following is an example of the config:

$ sudo cat /root/.freezer/db.conf
host = your.mysql.host.ip
user = backup 
password = userpassword

Every listed option is mandatory. There's no need to stop the mysql service before the backup execution.

Execute a MySQL backup using lvm snapshot:

$ sudo freezerc --lvm-srcvol /dev/mysqlvg/mysqlvol 
--lvm-dirmount /var/snapshot-backup
--lvm-volgroup mysqlvg --file-to-backup /var/snapshot-backup
--mysql-conf /root/.freezer/freezer-mysql.conf--container
mysql-backup-prod --mode mysql --backup-name mysql-ops002

All the freezerc activities are logged into /var/log/freezer.log.

Restore

As a general rule, when you execute a restore, the application that write or read data should be stopped.

There are 3 main options that need to be set for data restore

File System Restore:

Execute a file system restore of the backup name adminui.git:

$ sudo freezerc --container foobar-container-2
--backup-name adminui.git
--restore-from-host git-HP-DL380-host-001 --restore-abs-path
/home/git/repositories/adminui.git/
--restore-from-date "23-05-2014T23:23:23"

MySQL restore:

Execute a MySQL restore of the backup name holly-mysql. Let's stop mysql service first:

$ sudo service mysql stop

Execute Restore:

$ sudo freezerc --container foobar-container-2
--backup-name mysq-prod --restore-from-host db-HP-DL380-host-001
--restore-abs-path /var/lib/mysql --restore-from-date "23-05-2014T23:23:23"

And finally restart mysql:

$ sudo service mysql start

Execute a MongoDB restore of the backup name mongobigdata:

$ sudo freezerc --container foobar-container-2 --backup-name mongobigdata
 --restore-from-host db-HP-DL380-host-001 --restore-abs-path
/var/lib/mongo --restore-from-date "23-05-2014T23:23:23"

Architecture

Freezer architecture is simple. The components are:

  • OpenStack Swift (the storage)
  • freezer client running on the node you want to execute the backups or restore

Frezeer use GNU Tar under the hood to execute incremental backup and restore. When a key is provided, it uses OpenSSL to encrypt data (AES-256-CFB)

Low resources requirement

Freezer is designed to reduce at the minimum I/O, CPU and Memory Usage. This is achieved by generating a data stream from tar (for archiving) and gzip (for compressing). Freezer segment the stream in a configurable chunk size (with the option --max-seg-size). The default segment size is 128MB, so it can be safely stored in memory, encrypted if the key is provided, and uploaded to Swift as segment.

Multiple segments are sequentially uploaded using the Swift Manifest. All the segments are uploaded first, and then the Manifest file is uploaded too, so the data segments cannot be accessed directly. This ensue data consistency.

By keeping small segments in memory, I/O usage is reduced. Also as there's no need to store locally the final compressed archive (tar-gziped), no additional or dedicated storage is required for the backup execution. The only additional storage needed is the LVM snapshot size (set by default at 5GB). The lvm snapshot size can be set with the option --lvm-snapsize. It is important to not specify a too small snap size, because in case a quantity of data is being wrote to the source volume and consequently the lvm snapshot is filled up, then the data is corrupted.

If the more memory is available for the backup process, the maximum segment size can be increased, this will speed up the process. Please note, the segments must be smaller then 5GB, is that is the maximum object size in the Swift server.

Au contraire, if a server have small memory availability, the --max-seg-size option can be set to lower values. The unit of this option is in bytes.

How the incremental works

The incremental backups is one of the most crucial feature. The following basic logic happens when Freezer execute:

  1. Freezer start the execution and check if the provided backup name for the current node already exist in Swift
  2. If the backup exists, the Manifest file is retrieved. This is important as the Manifest file contains the information of the previous Freezer execution.

The following is what the Swift Manifest looks like:

{
    'X-Object-Meta-Encrypt-Data': 'Yes',
    'X-Object-Meta-Segments-Size-Bytes': '134217728',
    'X-Object-Meta-Backup-Created-Timestamp': '1395734461',
    'X-Object-Meta-Remove-Backup-Older-Than-Days': '',
    'X-Object-Meta-Src-File-To-Backup': '/var/lib/snapshot-backup/mongod_dev-mongo-s1',
    'X-Object-Meta-Maximum-Backup-level': '0',
    'X-Object-Meta-Always-Backup-Level': '',
    'X-Object-Manifest': u'socorro-backup-dev_segments/dev-mongo-s1-r1_mongod_dev-mongo-s1_1395734461_0',
    'X-Object-Meta-Providers-List': 'HP',
    'X-Object-Meta-Backup-Current-Level': '0',
    'X-Object-Meta-Abs-File-Path': '',
    'X-Object-Meta-Backup-Name': 'mongod_dev-mongo-s1',
    'X-Object-Meta-Tar-Meta-Obj-Name': 'tar_metadata_dev-mongo-s1-r1_mongod_dev-mongo-s1_1395734461_0',
    'X-Object-Meta-Hostname': 'dev-mongo-s1-r1',
    'X-Object-Meta-Container-Segments': 'socorro-backup-dev_segments'
}
  1. The most relevant data taken in consideration for incremental are:
  • 'X-Object-Meta-Maximum-Backup-level': '7'

Value set by the option: --max-level int

Assuming we are executing the backup daily, let's say managed from the crontab, the first backup will start from Level 0, that is, a full backup. At every daily execution, the current backup level will be incremented by 1. Then current backup level is equal to the maximum backup level, then the backup restart to level 0. That is, every week a full backup will be executed.

  • 'X-Object-Meta-Always-Backup-Level': ''

Value set by the option: --always-level int

When current level is equal to 'Always-Backup-Level', every next backup will be executed to the specified level. Let's say --always-level is set to 1, the first backup will be a level 0 (complete backup) and every next execution will backup the data exactly from the where the level 0 ended. The main difference between Always-Backup-Level and Maximum-Backup-level is that the counter level doesn't restart from level 0

  • 'X-Object-Manifest': u'socorro-backup-dev/dev-mongo-s1-r1_mongod_dev-mongo-s1_1395734461_0'

Through this meta data, we can identify the exact Manifest name of the provided backup name. The syntax is: container_name/hostname_backup_name_timestamp_initiallevel

  • 'X-Object-Meta-Providers-List': 'HP'

This option is NOT implemented yet The idea of Freezer is to support every Cloud provider that provide Object Storage service using OpenStack Swift. The meta data allows you to specify multiple provider and therefore store your data in different Geographic location.

  • 'X-Object-Meta-Backup-Current-Level': '0'

Record the current backup level. This is important as the value is incremented by 1 in the next freezer execution.

  • 'X-Object-Meta-Backup-Name': 'mongod_dev-mongo-s1'

Value set by the option: -N BACKUP_NAME, --backup-name BACKUP_NAME The option is used to identify the backup. It is a mandatory option and fundamental to execute incremental backup. 'Meta-Backup-Name' and 'Meta-Hostname' are used to uniquely identify the current and next incremental backups

  • 'X-Object-Meta-Tar-Meta-Obj-Name': 'tar_metadata_dev-mongo-s1-r1_mongod_dev-mongo-s1_1395734461_0'

Freezer use tar to execute incremental backup. What tar do is to store in a meta data file the inode information of every file archived. Thus, on the next Freezer execution, the tar meta data file is retrieved and download from swift and it is used to generate the next backup level. After the next level backup execution is terminated, the file update tar meta data file will be uploaded and recorded in the Manifest file. The naming convention used for this file is: tar_metadata_backupname_hostname_timestamp_backuplevel

  • 'X-Object-Meta-Hostname': 'dev-mongo-s1-r1'

The hostname of the node where the Freezer perform the backup. This meta data is important to identify a backup with a specific node, thus avoid possible confusion and associate backup to the wrong node.