openstack-ansible/deploy-guide/source/app-config-test.rst
Markus Zoeller 9603b8a04e deploy-guide: fix small rst format issues
This fixes a few minor rst format issues like:
* nested lists which were shown as blockquote
* code-blocks which were show as blockquote
* underlining of titles which didn't match
* missing backslash escaping in parsed-literal

Change-Id: I9b0934112f7f26775af52b6fc7de9fd29b215998
2017-03-28 18:38:06 +02:00

4.0 KiB

Appendix A: Example test environment configuration

Introduction

This appendix describes an example test environment for a working OpenStack-Ansible (OSA) deployment with a small number of servers.

This example environment has the following characteristics:

  • One infrastructure (control plane) host (8 vCPU, 8 GB RAM, 60 GB HDD)
  • One compute host (8 vCPU, 8 GB RAM, 60 GB HDD)
  • One Network Interface Card (NIC) for each host
  • A basic compute kit environment, with the Image (glance) and Compute (nova) services set to use file-backed storage.
  • Internet access via the router address 172.29.236.1 on the Management Network

Test environment host layout

Network configuration

Network CIDR/VLAN assignments

The following CIDR and VLAN assignments are used for this environment.

Network CIDR VLAN
Management Network 172.29.236.0/22

10

Tunnel (VXLAN) Network 172.29.240.0/22

30

Storage Network 172.29.244.0/22

20

IP assignments

The following host name and IP address assignments are used for this environment.

Host name Management IP Tunnel (VxLAN) IP Storage IP
infra1 172.29.236.11
compute1 172.29.236.12 172.29.240.12 172.29.244.12
storage1 172.29.236.13 172.29.244.13

Host network configuration

Each host will require the correct network bridges to be implemented. The following is the /etc/network/interfaces file for infra1.

Note

If your environment does not have eth0, but instead has p1p1 or some other interface name, ensure that all references to eth0 in all configuration files are replaced with the appropriate name. The same applies to additional network interfaces.

../../etc/network/interfaces.d/openstack_interface.cfg.test.example

Deployment configuration

Environment layout

The /etc/openstack_deploy/openstack_user_config.yml file defines the environment layout.

The following configuration describes the layout for this environment.

../../etc/openstack_deploy/openstack_user_config.yml.test.example

Environment customizations

The optionally deployed files in /etc/openstack_deploy/env.d allow the customization of Ansible groups. This allows the deployer to set whether the services will run in a container (the default), or on the host (on metal).

For this environment you do not need the /etc/openstack_deploy/env.d folder as the defaults set by OpenStack-Ansible are suitable.

User variables

The /etc/openstack_deploy/user_variables.yml file defines the global overrides for the default variables.

For this environment, you are using the same IP address for the internal and external endpoints. You will need to ensure that the internal and public OpenStack endpoints are served with the same protocol. This is done with the following content:

../../etc/openstack_deploy/user_variables.yml.test.example