Allain Legacy
71bebff81e
To support testing the upcoming standalone networking feature it is necessary to have a virtual switch that allows port VLAN configuration to be changed by the networking generic switch driver. Setting the test_vm_bridge_type to 'ovs' will create 3 separate VLANs for testing. One will be dedicated as an inspection network, another to the final 'tenant' network for the node, and the remaining one will be used for all other network types (i.e., cleaning, rescuing, servicing, etc...). Related-Bug: 2113769 Assisted-by: Claude Code/claude-sonnet-4 Change-Id: I54b154a28dcbb4f89b368deaa7c16792630f6564 Signed-off-by: Allain Legacy <alegacy@redhat.com>
132 lines
4.4 KiB
Django/Jinja
132 lines
4.4 KiB
Django/Jinja
# Configuration file for dnsmasq.
|
|
#
|
|
# Format is one option per line, legal options are the same
|
|
# as the long options legal on the command line. See
|
|
# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.
|
|
|
|
# Listen on this specific port instead of the standard DNS port
|
|
# (53). Setting this to zero completely disables DNS function,
|
|
# leaving only DHCP and/or TFTP.
|
|
{% if dnsmasq_enable_dns | bool == true %}
|
|
port=53
|
|
{% else %}
|
|
port=0
|
|
{% endif %}
|
|
|
|
{% if test_vm_switch_type == 'linux_bridge' %}
|
|
listen-address={{ internal_ip }}
|
|
{% endif %}
|
|
|
|
# On systems which support it, dnsmasq binds the wildcard address,
|
|
# even when it is listening on only some interfaces. It then discards
|
|
# requests that it shouldn't reply to. This has the advantage of
|
|
# working even when interfaces come and go and change address. If you
|
|
# want dnsmasq to really bind only the interfaces it is listening on,
|
|
# uncomment this option. About the only time you may need this is when
|
|
# running another nameserver on the same machine.
|
|
bind-interfaces
|
|
|
|
# Include another lot of configuration options.
|
|
#conf-file=/etc/dnsmasq.more.conf
|
|
conf-dir=/etc/dnsmasq.d
|
|
|
|
# If you don't want dnsmasq to read /etc/hosts, uncomment the
|
|
# following line.
|
|
#no-hosts
|
|
# or if you want it to read another file, as well as /etc/hosts, use
|
|
# this.
|
|
#addn-hosts=/etc/banner_add_hosts
|
|
{% if dnsmasq_additional_hostsdir is defined %}
|
|
addn-hosts={{ dhcp_additional_hostsdir }}
|
|
{% endif %}
|
|
|
|
dhcp-hostsdir={{ dnsmasq_dhcp_hostsdir }}
|
|
|
|
{% if inventory_dhcp | bool == true %}
|
|
dhcp-ignore=tag:!known
|
|
{% endif %}
|
|
|
|
# Set the domain for dnsmasq. this is optional, but if it is set, it
|
|
# does the following things.
|
|
# 1) Allows DHCP hosts to have fully qualified domain names, as long
|
|
# as the domain part matches this setting.
|
|
# 2) Sets the "domain" DHCP option thereby potentially setting the
|
|
# domain of all systems configured by DHCP
|
|
# 3) Provides the domain part for "expand-hosts"
|
|
#domain=thekelleys.org.uk
|
|
{% if domain is defined %}
|
|
domain={{ domain }}
|
|
{% endif %}
|
|
|
|
# Uncomment this to enable the integrated DHCP server, you need
|
|
# to supply the range of addresses available for lease and optionally
|
|
# a lease time. If you have more than one network, you will need to
|
|
# repeat this for each network on which you want to supply DHCP
|
|
# service.
|
|
{% if test_vm_switch_type == 'linux_bridge' %}
|
|
{% if testing | bool == true %}
|
|
dhcp-range=192.168.122.2,192.168.122.254,12h
|
|
{% elif inventory_dhcp | bool == true %}
|
|
dhcp-range={{dhcp_pool_start}},static,{{dhcp_static_mask}},{{dhcp_lease_time}}
|
|
{% else %}
|
|
dhcp-range={{dhcp_pool_start}},{{dhcp_pool_end}},{% if dhcp_pool_mask is defined %}{{dhcp_pool_mask}},{% endif %}{{dhcp_lease_time}}
|
|
{% endif %}
|
|
{% endif %}
|
|
|
|
# Override the default route supplied by dnsmasq, which assumes the
|
|
# router is the same machine as the one running dnsmasq.
|
|
{% if not (dnsmasq_router | default(True) | bool) %}
|
|
{% if dnsmasq_router | ipaddr %}
|
|
dhcp-option=3,{{dnsmasq_router}}
|
|
{% else %}
|
|
dhcp-option=3
|
|
{% endif %}
|
|
{% endif %}
|
|
|
|
{% if dnsmasq_dns_servers is defined %}
|
|
dhcp-option=6,{{dnsmasq_dns_servers}}
|
|
{% endif %}
|
|
|
|
{% if dnsmasq_ntp_servers is defined %}
|
|
dhcp-option=42,{{dnsmasq_ntp_servers}}
|
|
{% endif %}
|
|
|
|
dhcp-match=set:ipxe,175 # iPXE sends a 175 option.
|
|
dhcp-match=set:efi,option:client-arch,7
|
|
dhcp-match=set:efi,option:client-arch,9
|
|
dhcp-match=set:efi,option:client-arch,11
|
|
|
|
dhcp-optsdir={{ dnsmasq_dhcp_optsdir }}
|
|
{% if dhcp_provider == 'none' or enable_inspector_discovery | bool %}
|
|
# Boot for Etherboot gPXE. The idea is to send two different
|
|
# filenames, the first loads gPXE, and the second tells gPXE what to
|
|
# load. The dhcp-match sets the gpxe tag for requests from gPXE.
|
|
dhcp-userclass=set:gpxe,"gPXE"
|
|
dhcp-boot=tag:gpxe,/ipxe.pxe
|
|
|
|
{% if default_boot_interface is defined and default_boot_interface == 'pxe' %}
|
|
# Client is PXE booting over EFI, boot with the grub shim
|
|
dhcp-boot=tag:efi,/bootx64.efi
|
|
{% elif 'ipxe' in enabled_boot_interfaces.split(',') %}
|
|
# Client is PXE booting over EFI without iPXE ROM; send EFI version of iPXE chainloader
|
|
dhcp-boot=tag:efi,tag:!ipxe,/{{ ipxe_efi_binary }}
|
|
{% endif %}
|
|
|
|
{% if testing | bool == true %}
|
|
dhcp-boot=tag:ipxe,http://192.168.122.1:{{ file_url_port }}/boot.ipxe
|
|
{% else %}
|
|
dhcp-boot=tag:ipxe,http://{{ internal_ip }}:{{ file_url_port }}/boot.ipxe
|
|
{% endif %}
|
|
|
|
# Catch-all boot options used when no other boot options are matched.
|
|
dhcp-boot=/undionly.kpxe
|
|
{% endif %}
|
|
|
|
{% if testing | bool == true %}
|
|
log-queries
|
|
log-dhcp
|
|
{% endif %}
|
|
|
|
enable-tftp
|
|
tftp-root={{ tftp_boot_folder }}
|