Install utility to deploy OpenStack on multiple hosts.
Go to file
Javier Pena bb28296d5e Remove parameters deprecated by puppet-neutron
[1] removed some deprecated parameters in puppet-neutron. Some of
them are still being used by Packstack, so let's remove them.

[1] - https://review.openstack.org/575976

Change-Id: I4b4beac2f4061689056c399e05d9dd5c6689e82f
2018-06-25 15:15:27 +02:00
docs Remove parameters deprecated by puppet-neutron 2018-06-25 15:15:27 +02:00
packstack Remove parameters deprecated by puppet-neutron 2018-06-25 15:15:27 +02:00
playbooks Add multinode CI job 2018-02-08 08:22:18 +00:00
releasenotes Remove parameters deprecated by puppet-neutron 2018-06-25 15:15:27 +02:00
roles/packstack-integration-tempest/tasks Move playbook implementation to a role 2018-01-09 15:46:30 +00:00
tests Temporary switch to ovs in scenario 001, fix gate 2018-05-18 16:28:25 +02:00
tools Add Panko service support 2017-01-05 19:14:26 +00:00
.gitignore Switch to using stestr 2018-06-05 09:04:31 -04:00
.gitreview Update .gitreview for new namespace 2015-10-17 22:34:57 +00:00
.stestr.conf Switch to using stestr 2018-06-05 09:04:31 -04:00
.testr.conf Use ostestr instead of nosetest 2016-10-30 21:09:43 +01:00
.zuul.yaml Add multinode CI job 2018-02-08 08:22:18 +00:00
Gemfile Making Packstack Compatible with Puppet 4.x 2015-04-01 10:37:11 +02:00
LICENSE Initial Subset of oVirt setup script 2012-08-02 16:50:19 +01:00
MANIFEST.in Switch README file to Markdown 2014-11-12 17:30:32 +01:00
Puppetfile Fix rabbitmq configuration 2018-04-26 17:10:34 +02:00
README.md Temporary switch to ovs in scenario 001, fix gate 2018-05-18 16:28:25 +02:00
Rakefile Add workaround for PuppetLint.configuration.ignore_paths 2014-11-17 16:26:20 +01:00
bindep.txt Move other-requirements.txt to bindep.txt 2016-08-12 21:04:43 +02:00
requirements.txt Remove cryptography from requirements.txt 2017-08-29 11:05:47 +02:00
run_tests.sh Add basic system arch support to test scenarios 2018-04-17 17:34:53 +00:00
setup.cfg Use PBR 2016-09-21 17:49:02 +02:00
setup.py Use PBR 2016-09-21 17:49:02 +02:00
test-requirements.txt Switch to using stestr 2018-06-05 09:04:31 -04:00
tox.ini Switch to using stestr 2018-06-05 09:04:31 -04:00

README.md

Packstack

Utility to install OpenStack on Red Hat based operating system. See other branches for older OpenStack versions. Details on how to contribute to Packstack may be found in the Packstack wiki at https://wiki.openstack.org/wiki/Packstack Additional information about involvement in the community around Packstack can be found at https://openstack.redhat.com/Get_involved

This utility can be used to install OpenStack on a single or group of hosts (over ssh).

This utility is still in the early stages, a lot of the configuration options have yet to be added.

Installation of packstack:

$ yum install -y git
$ git clone git://github.com/openstack/packstack.git
$ cd packstack && sudo python setup.py install

Installation of Puppet modules (REQUIRED if running packstack from source):

$ export GEM_HOME=/tmp/somedir
$ gem install r10k
$ sudo -E /tmp/somedir/bin/r10k puppetfile install -v
$ sudo cp -r packstack/puppet/modules/packstack /usr/share/openstack-puppet/modules

Option 1 (all-in-one)

$ packstack --allinone

This will install all OpenStack services on a single host without prompting for any configuration information. This will generate an "answers" file (packstack-answers-<date>-<time>.txt) containing all the values used for the install.

If you need to re-run packstack, you must use the --answer-file option in order for packstack to use the correct values for passwords and other authentication credentials:

$ packstack --answer-file packstack-answers-<date>-<time>.txt

Option 2 (using answer file)

$ packstack --gen-answer-file=ans.txt

Then edit ans.txt as appropriate e.g.

  • set CONFIG_SSH_KEY to a public ssh key to be installed to remote machines

  • Edit the IP address to anywhere you want to install a piece of OpenStack on another server

  • Edit the 3 network interfaces to whatever makes sense in your setup

    $ packstack --answer-file=ans.txt

Option 3 (prompts for configuration options)

$ packstack

that's it, if everything went well you can now start using OpenStack

$ cd
$ . keystonerc_admin
$ nova list
$ swift list  # if you have installed swift

Config options

  • CONFIG_NOVA_COMPUTE_HOSTS :
    • A comma separated list of ip addresses on which to install nova compute
  • CONFIG_SWIFT_STORAGE_HOSTS :
    • A comma separated list of swift storage devices
      • 1.1.1.1: create a testing loopback device and use this for storage
      • 1.1.1.1/sdb: use /dev/sdb on 1.1.1.1 as a storage device

Logging

The location of the log files and generated puppet manifests are in the /var/tmp/packstack directory under a directory named by the date in which Packstack was run and a random string (e.g. /var/tmp/packstack/20131022-204316-Bf3Ek2). Inside, we find a manifest directory and the openstack-setup.log file; puppet manifests and a log file for each one are found inside the manifest directory.

Debugging

To make Packstack write more detailed information into the log file you can use the -d switch:

$ packstack -d --allinone

When upgrading to a new OpenStack release and reusing old answerfile it is useful to know if any Packstack option was removed. If answerfile is written by hand it is possible to make a mistake. The --validate-answer-file switch allows checking if any provided option is not recognized by Packstack.

$ packstack --validate-answer-file=ans.txt

Developing

To ease development of Packstack, it can be useful to install from git such that updates to the git repositories are immediately effective without reinstallation.

To do this, start with a minimal CentOS 7 installation. Then remove any relevant packages that might conflict:

$ yum -y erase openstack-packstack*,puppet-*

Disable SELinux by changing "enforcing" to "permissive" in /etc/sysconfig/selinux, then reboot to allow service changes to take effect and swap over networking. Then install packages:

$ yum -y install git python-setuptools

And install RDO:

$ yum -y install https://www.rdoproject.org/repos/rdo-release.rpm
$ yum -y update

Install Puppet modules as described above.

Then we get Packstack:

$ yum install -y python-crypto python-devel libffi-devel openssl-devel gcc-c++
$ git clone https://github.com/openstack/packstack
$ cd packstack
$ python setup.py develop

And we're done. Changes to the contents of Packstack source repository are picked up by the Packstack executable without further intervention, and Packstack is ready to install.

Puppet Style Guide

IMPORTANT https://docs.puppetlabs.com/guides/style_guide.html

Please, respect the Puppet Style Guide as much as possible !

Running local Puppet-lint tests

It assumes that both bundler as well as rubygems (and ruby) are already installed on the system. If not, run this command:

$ sudo yum install rubygems rubygem-bundler ruby ruby-devel -y

Go into the Packstack root directory.

$ cd packstack/

A Rakefile contains all you need to run puppet-lint task automatically over all the puppet manifests included in the Packstack project.

$ ls -l packstack/puppet/templates/

and

$ ls -l packstack/puppet/modules/

The default puppet-lint pattern for .pp files is **/*.pp. So there is no need to go inside those directories to run puppet-lint !

$ mkdir vendor
$ export GEM_HOME=vendor
$ bundle install
$ bundle exec rake lint

Packstack integration tests

Packstack is integration tested in the OpenStack gate and provides the means to reproduce these tests on your environment if you wish.

Scenario000 installs packstack allinone only and doesn't run any tests. This is the current matrix of available tests:

- scenario000 scenario001 scenario002 scenario003
keystone FERNET FERNET FERNET FERNET
glance file swift file
nova X X X X
neutron X X X X
neutron plugin ovs ovs ovs ovs
lbaasv2 X
vpnaas
cinder X X
ceilometer X X
aodh X X
gnocchi X X
panko X
heat X
swift X X
sahara X
trove X
horizon X
manila X
SSL X

To run these tests:

export SCENARIO="scenario001"
./run_tests.sh

run_tests.sh will take care of installing the required dependencies, configure packstack to run according to the above matrix and run the complete installation process. If the installation is successful, tempest will also run smoke tests.

By default, run_tests.sh will set up delorean (RDO Trunk) repositories. There are two ways of overriding default repositories:

export DELOREAN="http://someotherdomain.tld/delorean.repo"
export DELOREAN_DEPS="http://someotherdomain.tld/delorean-deps.repo"
./run_tests.sh

You can also choose to disable repository management entirely:

<setup your own custom repositories here>
export MANAGE_REPOS="false"
./run_tests.sh